'BEAST' - THE NEW BREED (The Tundra-Truggy Sequal)
 

:twisted:***WELCOME TO THE NEW BREED OF 'BEAST'***:twisted:

Revised parts list: (4-1-13)
Latest Mock-Up Picture
http://i92.photobucket.com/albums/l2...9EB0080C0A.jpg

*Chassis:
MG200 Custom Chassis (His skill pieced about 25 pictures I sent him together exactly as I asked and the end result- FREAKIN AWESOME!!!)

*Axles
-GCM MetalHead Axles w/ custom width tubes
-VP Wraith C's & Knuckles & steering
-Axial XR-10 Universals
-CREEPERBOB Titanium rear shafts (custom cut to match front width)
-Axial HD Standard-Drive/Under-Drive Gearsets
-DMG V3 Truss-Front (3-link w/ taller panhard bar)
-DMG V1 Truss-Rear (4-link)
-Felsenfest No-Slop Spools

*Transmission
-VP Aluminum Housing & Motor Mount
-Robinson Racing 1-Piece Hardend Output Gear
-HR Steel Gears
-GCM Transfercase


*MISC.
-Losi 4" Shocks
-MIP driveshafts
-VP Titanium Links
-VP 2.2 SLW's on 850 Hubs & SLW Brake Rotors
-2.2" Pitbull RockBeast2 Tires
-Crawler Innovations 6" Double Duece Foams and tuning rings
-VP Gear Grease

*Electronics
-Holmes Hobbies 45T TorqueMaster
-Holmes Hobbies BRXL ESC
-Hitec HS-7980TH Steering Servo w/ CCBEC
-HS-7950TH Servo Winch w/ CCBEC & Maddog winch spool
-3Racing Winch on Rear
-Futaba 4PL
-Thunder Power 2250mAh 3-cell lipos (65C)
-HeyOK winch controlers & light controlers (to control a metric-butt load of led's)

UM...... :flipoff:

Damn kid spend enough money?? I think you coulda went a little more beefy! lol

Are you gona do a spare tire?

oh i've spent way too much money!! I should've just bought a real 1:1 rig :oops:
but why half ass is at this point?! GO BIG OR GO HOME!! "thumbsup"

And thats a NO to the spare... if i was goin 1.9s i would for sure but with 2.2s i think it would be a bit bulky.. plus i dont wanna buy another set of wheels and tires.

I think your going HUGE not big lol

Progress:

http://www.rccrawler.com/forum/pictu...ictureid=22125
http://www.rccrawler.com/forum/pictu...ictureid=22126
http://www.rccrawler.com/forum/pictu...ictureid=22127

yeah!!!
 

oh this is gona be BADASS! :twisted:

i love the tundra bodies cant wait to see finished product

Front bumper done. The front fender tubes will tie into it.

http://www.rccrawler.com/forum/pictu...ictureid=22143
http://www.rccrawler.com/forum/pictu...ictureid=22142

!
 

PERFECT execution of how I wanted the front bumper!! Im very impressed! Just dont forget the 2 shackle mounts "thumbsup"

Thanks! I won't forget;-)

Out of curiosity... what dia. tubing are you using? And are you welding the joints or brazing them?? cause the look SUPER CLEAN!

100% welded joints"thumbsup"

I mostly use 3/16 DOM .035 wall steel tube (NOT brake line!) It comes from Germany.

The wheels and rubber
 

-Vanquish Products SSZ-9 2.2 wheels on 725 hubs (soon to be 850)
-Pitbull Rockbeast Tires
-Crawler Innovations Double Duece Foams
-Weights in the fronts (dont recall how much)

http://i92.photobucket.com/albums/l2...c/P4230160.jpg

The powerplant
 

-VP alumn. tranny housing and spur gear cover, Robinson Racing Hardened Gear, HR steel gears, alumn. spur gear, and the HH Torquemaster 45T."thumbsup"


http://i92.photobucket.com/albums/l2...c/P4230167.jpg

Hmmm...I might need you to send me all of those for mock up :mrgreen:.

This ig going to be an awesome build.

HAHA :lmao:these goodies dont leave my possesion!


Thanks man! Im way excited

Lookin good! I still cant get over how clean your joints are!! "thumbsup"

This build looks really beast ...wish I knew how to this kind of work

Sent from my PC36100 using Tapatalk