RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   2.2 Scale Rigs (http://www.rccrawler.com/forum/2-2-scale-rigs/)
-   -   Wish me luck guys building boyer/ wraith jeep (http://www.rccrawler.com/forum/2-2-scale-rigs/379251-wish-me-luck-guys-building-boyer-wraith-jeep.html)

mtgrizzlymn 04-19-2012 04:30 PM

Wish me luck guys building boyer/ wraith jeep
 
1 Attachment(s)
Attachment 194569Got a boyer used frame and wraith drivetrain going to make an awesome jeep i hope

mtgrizzlymn 04-20-2012 01:47 AM

Re: Wish me luck guys building boyer/ wraith jeep
 
I posted in general 2.2 section to i need some help finding cvds total length front 134 mm and rear 140 on axial drivetrain. I have no idea where to begin looking for these and have the correct ends.

Rockatanski 04-20-2012 02:05 AM

Have a look @ MIPs

mtgrizzlymn 04-20-2012 03:17 AM

Re: Wish me luck guys building boyer/ wraith jeep
 
Do i just call they really dont have a list of lengths.

stelerzman 04-21-2012 02:34 PM

Re: Wish me luck guys building boyer/ wraith jeep
 
Wouldn't hurt and at least you'll know.

ScaleFreak93 04-21-2012 03:28 PM

Re: Wish me luck guys building boyer/ wraith jeep
 
They have wraith specific CVD's.

mtgrizzlymn 04-21-2012 04:09 PM

1 Attachment(s)
I need longer than wraith heres new plates and tranny and motor mounted very tightAttachment 194767

mtgrizzlymn 04-23-2012 02:50 PM

1 Attachment(s)
Need driveshafts !Attachment 194951

mtgrizzlymn 04-25-2012 02:53 PM

1 Attachment(s)
Got shocks spacers made couldnt use the rc4 wd ones i wanted! Couldnt find bolts long enough to go threw top of shocks diameter was always to big not sure if a guy could try drilling or not.Attachment 195120 this project has become way harder than i thought it would be.

mtgrizzlymn 04-25-2012 03:44 PM

1 Attachment(s)
Guys am i better off useing the stock wraith plate or bending my own 1/4x.049 aluminum tubing and connecting to the bender chassis?Attachment 195129

mtgrizzlymn 04-26-2012 01:15 AM

Re: Wish me luck guys building boyer/ wraith jeep
 
Anyone have an idea for a hood that could fit this rig?

mgputer 04-26-2012 05:04 AM

Re: Wish me luck guys building boyer/ wraith jeep
 
Quote:

Originally Posted by mtgrizzlymn (Post 3703358)
Anyone have an idea for a hood that could fit this rig?

Theres a proline jeep body pre-angled a bit that should work on there if you cut it apart and use the hood and partial fender for the front then sidepanels on the sides. Most guys i have seen use zip ties but you could always attach some small nuts or epoxy on some plastic tubes for the screws to bolt into.

What frame is that and where could I get one? I have thought about getting the integy one as its like $60 but I really like the timberwolf from RC4WD but that chassis is $150. This chassis you have looks very similiar to the old proline bolt on tuber frame for the ax10. To bad its discontinued! Any other frame recommendations would be appreciated!

mtgrizzlymn 04-26-2012 11:05 AM

Re: Wish me luck guys building boyer/ wraith jeep
 
I bought it used told it was made by Bender. I can bolt panes on he has nuts welded all over chassis very good on that part! Ill look at proline it looks like my wreckluse hood but i dont know which body that is either. As far as getting one keep a lookout on classifieds thats where i got mine i waited quite awhile for the right one.

mtgrizzlymn 04-26-2012 11:12 AM

Re: Wish me luck guys building boyer/ wraith jeep
 
I have a metal tuber i picked up very nice just chassis that l picked up that is a replica of that proline its alot smaller than this chassis i have now.

mtgrizzlymn 04-26-2012 07:50 PM

Re: Wish me luck guys building boyer/ wraith jeep
 
My hood i need is 6.4 all the way. Stangkilla cj grill fits perfect into the front of this frame! Now i need a jeep hood. The hpi jeep rubicon be the closest???

mtgrizzlymn 05-02-2012 12:08 PM

1 Attachment(s)
Got my first set of links made! Attachment 195775

mtgrizzlymn 05-08-2012 12:16 PM

1 Attachment(s)
Driveshaft problem overAttachment 196392

mtgrizzlymn 05-08-2012 12:18 PM

1 Attachment(s)
Panels done just have to cut up a new rubicon body for hood man it sucks to ruin a nice bodyAttachment 196393

gabehunt 05-08-2012 12:22 PM

Re: Wish me luck guys building boyer/ wraith jeep
 
I like the looks of this thing! its mean

mtgrizzlymn 05-08-2012 11:58 PM

Re: Wish me luck guys building boyer/ wraith jeep
 
Thanks i appreciate it i cant wait to run it. This stuff takes so long to get ready but shoud be geat when done.


All times are GMT -6. The time now is 07:30 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com