Wish me luck guys building boyer/ wraith jeep 1 Attachment(s) Attachment 194569Got a boyer used frame and wraith drivetrain going to make an awesome jeep i hope |
Re: Wish me luck guys building boyer/ wraith jeep I posted in general 2.2 section to i need some help finding cvds total length front 134 mm and rear 140 on axial drivetrain. I have no idea where to begin looking for these and have the correct ends. |
Have a look @ MIPs |
Re: Wish me luck guys building boyer/ wraith jeep Do i just call they really dont have a list of lengths. |
Re: Wish me luck guys building boyer/ wraith jeep Wouldn't hurt and at least you'll know. |
Re: Wish me luck guys building boyer/ wraith jeep They have wraith specific CVD's. |
1 Attachment(s) I need longer than wraith heres new plates and tranny and motor mounted very tightAttachment 194767 |
1 Attachment(s) Need driveshafts !Attachment 194951 |
1 Attachment(s) Got shocks spacers made couldnt use the rc4 wd ones i wanted! Couldnt find bolts long enough to go threw top of shocks diameter was always to big not sure if a guy could try drilling or not.Attachment 195120 this project has become way harder than i thought it would be. |
1 Attachment(s) Guys am i better off useing the stock wraith plate or bending my own 1/4x.049 aluminum tubing and connecting to the bender chassis?Attachment 195129 |
Re: Wish me luck guys building boyer/ wraith jeep Anyone have an idea for a hood that could fit this rig? |
Re: Wish me luck guys building boyer/ wraith jeep Quote:
What frame is that and where could I get one? I have thought about getting the integy one as its like $60 but I really like the timberwolf from RC4WD but that chassis is $150. This chassis you have looks very similiar to the old proline bolt on tuber frame for the ax10. To bad its discontinued! Any other frame recommendations would be appreciated! |
Re: Wish me luck guys building boyer/ wraith jeep I bought it used told it was made by Bender. I can bolt panes on he has nuts welded all over chassis very good on that part! Ill look at proline it looks like my wreckluse hood but i dont know which body that is either. As far as getting one keep a lookout on classifieds thats where i got mine i waited quite awhile for the right one. |
Re: Wish me luck guys building boyer/ wraith jeep I have a metal tuber i picked up very nice just chassis that l picked up that is a replica of that proline its alot smaller than this chassis i have now. |
Re: Wish me luck guys building boyer/ wraith jeep My hood i need is 6.4 all the way. Stangkilla cj grill fits perfect into the front of this frame! Now i need a jeep hood. The hpi jeep rubicon be the closest??? |
1 Attachment(s) Got my first set of links made! Attachment 195775 |
1 Attachment(s) Driveshaft problem overAttachment 196392 |
1 Attachment(s) Panels done just have to cut up a new rubicon body for hood man it sucks to ruin a nice bodyAttachment 196393 |
Re: Wish me luck guys building boyer/ wraith jeep I like the looks of this thing! its mean |
Re: Wish me luck guys building boyer/ wraith jeep Thanks i appreciate it i cant wait to run it. This stuff takes so long to get ready but shoud be geat when done. |
Re: Wish me luck guys building boyer/ wraith jeep Got traxxas vl3mounted up front with fan body panels all cut and painted. Picts tomorroe not sure where to put battery and reciver and what to do to cover interior up. |
1 Attachment(s) Radio box installed servo everything but battery packAttachment 196894 |
Re: Wish me luck guys building boyer/ wraith jeep Bent som aluminum today to mount 2 1300 3s packs underneath boy does that light the velenion motor up fast. This will for sure be an excellent rock racer! |
Re: Wish me luck guys building boyer/ wraith jeep Post some pics of it on a level surface. I'd like to see the ride height. With that kind of power, it sounds like a rollover champion. :shock: |
Re: Wish me luck guys building boyer/ wraith jeep Ill get some picts its pretty wide and is fast ran it today and loved it. Tires are to soft on sidewalls but hit the throttle and it lights them up good. |
All times are GMT -6. The time now is 08:42 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com