Szczerba's Scramblin' KOH
 

wrestled the chassis from mojave405rider
Great fabrication "thumbsup"
http://www.rccrawler.com/forum/2-2-s...r-chassis.html


14" Wheelbase
Axles:
Vanquish CNC Machine Wraith Axle Cases
HD Axial Gears
Axial Lower Link Mounts
Vanquish Wraith Chubs C-Hub
Vanquish Wraith Steering Knuckles
Vanquish Titanium Tie Rods
RC4WD ARB Diff Cover for Wraiths
STRC Knuckles and C-Hubs
Axial universal's on all corners
"Dinky Link" S-Type (Front)
"Dinky Link" S-Type (Rear)

Transmission:
Vanquish Aluminum Axial Transmission
All Metal with Robinson 1 piece locker
Billet Works Designs Heavy Duty Axial Motor Plate
Crawler Innovations 4340 steel; 5mm - Axial Trans Output Pair
MIP Driveshafts
32 pitch gears 54-60t
15-20t pinions

Shocks..
RC4WD 110mm Dual Spring Shocks
RC4WD 110mm Ultimate Scale Shocks
Custom lower link/shock mounts for dual shocks welded to Dinky RC's 4 link mounts

Links..
Lunsford Titanium Links with Revo Rod ends

Electronics:
Mamba Max Pro
Tekin Pro4@ 4000kv
Servos: Hitec 7950th and Hitec 5985tg
Castle Creations BEC PRO
3s Lipo
Wheels/Tires/Foams..
Eritex Rockers 2.2
Crawler Innovations/Pit Bull 2.2 Rock Beast 2 & 6.0 Double Deuce Foam Combo

Re: Szczerba's Scramblin' KOH
 

Really like the photo booth. :ror:

Re: Szczerba's Scramblin' KOH
 

Looks like a sweet score Shane! Anxious to see how the dual shock mounts on the chassis are done. "thumbsup"

Re: Szczerba's Scramblin' KOH
 

it's featured in all my builds "thumbsup"

Definitley unique. The lower shock link mounts took me 2 hours to make. Tack welded to the Dinky R/C link mounts. Finish weld them tonight and start on chassis shock mounts.

Re: Szczerba's Scramblin' KOH
 

Looking like off to a good start!

Re: Szczerba's Scramblin' KOH
 

I'm liking the looks of this! ;-)

Re: Szczerba's Scramblin' KOH
 

This thing looks like it has a stealth fighter cockpit!

Szczerba's Scramblin' KOH
 

Thanks guys. mojave450rider laid down some nice lines on this chassis.
Pics from mock up the other day. Probably wont get to work on this until the weekend. Wildfire season is starting around these parts.
http://img.tapatalk.com/d/13/03/15/ta7ygy8u.jpg
http://img.tapatalk.com/d/13/03/15/9egezatu.jpg
http://img.tapatalk.com/d/13/03/15/pyzejupy.jpg

Re: Szczerba's Scramblin' KOH
 

I'm going to have to follow this one!:twisted:

Re: Szczerba's Scramblin' KOH
 

Looks agressive! I like the lines on the chassis and on the skins.

Thanks guys.
Full bump mock up. Link geometry needs fixed. Shocks in rough locations.

Will work on new upper link mounts for the chassis and the shock mounts tomorrow. Just gotta stare at it long enough.
http://img.tapatalk.com/d/13/03/16/avetema8.jpg

Shock mounts, mock mounted.

http://img.tapatalk.com/d/13/03/18/a5esujy6.jpg
http://img.tapatalk.com/d/13/03/18/zuse3y7e.jpg
http://img.tapatalk.com/d/13/03/18/dedu2eta.jpg

Re: Szczerba's Scramblin' KOH
 

eritex rockers?
nice score!

Re: Szczerba's Scramblin' KOH
 

So you are saying that the wheels are the nicest thing on this rig? :ror:

Got them a few months ago. I am keeping them, just not sure if they will stay on this rig or not.

I thought the new 2.2 pit bulls were too tall for most rigs. They kinda scale out on this chassis? Not made up my mind yet.

Re: Szczerba's Scramblin' KOH
 

Is it ready to go? Haven't seen any new posts lately?

Re: Szczerba's Scramblin' KOH
 

Waiting on some parts to arrive. Got them all in today. Progress will begin shortly.

Re: Szczerba's Scramblin' KOH
 

Lookin' slick Szczerba!!!

Re: Szczerba's Scramblin' KOH
 

This is a sick chassis! Reminds me of the Warthog. Looking forward to more updates and eventually, some video footage.

Re: Szczerba's Scramblin' KOH
 

Thanks guys. I am going to try and get alot of the work done on it tomorrow. Since I welded the lower link/dual shock mounts to the Dinky R/C 4 links, I am stuck with the upper link position now. If I want this chassis to ride low, I am going to have to design new upper link mounts at the chassis/skid side. I'll figure it all out this weekend.

Also, I have an Exo IFS sitting on the bench now. "thumbsup"
I am going to use the solid front axle for now but the IFS might find it's way under this rig too.

Made new chassis upper link mounts for more adjustability.
Added more bracing on the chassis.
Finished welding shock/lower link mounts to Dinky RC upper link plate.
Left to do:
Interior, electronics mounting, lights and paint.

http://img.tapatalk.com/d/13/03/25/8ypaje2u.jpg
http://img.tapatalk.com/d/13/03/25/3agy7a2u.jpg
http://img.tapatalk.com/d/13/03/25/u8u6ysy9.jpg
http://img.tapatalk.com/d/13/03/25/gu2agavu.jpg
http://img.tapatalk.com/d/13/03/25/a9yne2u9.jpghttp://img.tapatalk.com/d/13/03/25/zybezyha.jpg