{{{class 3 caddy}}}
 

I have been wanting for quite sometime now to use these super sick wheels and this body together!!

SO HERE WE GO :mrgreen:

Im wanting to run C2 and C3 in Cedar City for the championships, SO I GOTTA GET THIS PIG DONE!!

1/10 CADDY TRUCK BODY
CUSTOM CHASSIS
VP DRESSED AND NARROWED WRAITH AXLES (XR10 WIDTH)
VP 2.2 ROCKSTAR WHEELS
CUSTOM --5"-- 1.9 PITBULL TIRES CUT AND STRETCHED TO 2.2
KMS HOBBICO CS170 WINCH

MORE DETAILS TO FOLLOW---

HERES A FEW PICS READY TO GET STARTED




http://www.usca-rc.com/download/file.php?id=1478&t=1

http://www.usca-rc.com/download/file.php?id=1479

http://www.usca-rc.com/download/file.php?id=1480

http://www.usca-rc.com/download/file.php?id=1481

Re: {{{class 3 caddy}}}
 

a local guy runs a caddy for his c3 rig! gotta have class on the trails! lol nice start!"thumbsup"

Re: {{{class 3 caddy}}}
 

That's gonna be bad. Makes me want to build one with my new bright dodge body.

Re: {{{class 3 caddy}}}
 

Damn another escalade c3........? Damn everyone's crampin my style! Lol.

And we can banter on who's was first........ Mine was started 2 years ago by local member and never got finished till I took to scaleready and dropped off..... Marcus had his finished first tho.haha My build and pics have not been showed that much cause I'm too lazy to finish the threads..... I'll post some up.... Maybe lol

Marcus is using a different body than the one you have here. I have two of those bodies....just an fyi its an eztec body.

I will help you out now......if you keep the mirrors they will crack up the body line. I ground and shaped mine off after tenex7r ed both sides because of cracking on side hits. Also when attaching front end you may have issues. I only used grill and center screw and texax7r grill on due to lack of mounting and didn't use lights cause unless front is complete parts will want to seperate and come off.... I'm right at 5/8 from body with tsl tires and streched y 14 in legnth with a bit of castor tho.

I'm stoked.... Kinda to see another caddy build........

Also what did you do with rear end? If not using it ill take it.

Re: {{{class 3 caddy}}}
 

hack-a-lac has ya both beat."thumbsup"

Re: {{{class 3 caddy}}}
 

Thanx!!!!

im using the bed sides with some dovetailed tubework hopefully to gain more points and if anything just PLAIN look bad A$$"thumbsup"

Re: {{{class 3 caddy}}}
 

I was talking about myself and Marcus "boostfreak". I remember Andy building this rig..... Also have pics of that rig in Montana..... Reason why I went full body and not a toober, and murdered mine out... Lol

Re: {{{class 3 caddy}}}
 

HAD SOME MORE TIME TONIGHT TO MAKE SOME MORE PROGRESS, I PICKED UP THIS SWEET CHASSIS FROM A FRIEND (klaybert) THAT ALREADY HAD MOST OF THE TUBE WORK DONE TO FIT THIS BODY WITH BOATSIDES AND ALL, I DID HAVE TO MAKE SOME MINOR CHANGES!

i WILL BE REFORMING THE BUMPERS A BIT TO GIVE IT MORE OF THE ROCK ARMOR LOOK AS WELL AS ADDING SOME TUBE WORK TO THE REAR FOR HEADACHE RACK AND TO ACCOMMODATE REAR BEDSIDES AND POSSIBLY SPARE TIRE HOLDER!!


ALSO GOT MY TRANNY BUILT AND MAIN PART OF THE GRILL ASSEMBLY CUT DOWN TO SIZE!!

http://www.usca-rc.com/download/file.php?id=1483

http://www.usca-rc.com/download/file.php?id=1484

http://www.usca-rc.com/download/file.php?id=1485

Re: {{{class 3 caddy}}}
 

BUILT TRANS AND NARROWED UP GRILL

http://http://www.usca-rc.com/download/file.php?id=1486

Re: {{{class 3 caddy}}}
 

gotta play a little more tonight messin with fit up for body and started reshaping the front bumper!!

http://www.usca-rc.com/download/file.php?id=1487

http://www.usca-rc.com/download/file.php?id=1488


http://www.usca-rc.com/download/file.php?id=1489

http://www.usca-rc.com/download/file.php?id=1490

Re: {{{class 3 caddy}}}
 

Sweet, another Caddy."thumbsup" Sure beats having another hilux.:lmao:

I never did a build thread on mine, here's a pic from Axialfest 2012

Re: {{{class 3 caddy}}}
 

NICE SHE IS A BEAUTY "thumbsup"

Re: {{{class 3 caddy}}}
 

Back on this project, gotta have er done for the Scale Champs in April.

Got my pimpin grill done tonight :mrgreen:

http://www.usca-rc.com/download/file.php?id=2095http://www.usca-rc.com/download/file.php?id=2094&t=1

Re: {{{class 3 caddy}}}
 

The front grille looks nice, makes me want to one

Right on brother, are those the original starz or the re released one's? I want a set bad, theirs an s10 rolling around here with a set its a ridding buddies truck, hed trip if I pulled out a 1/10 scale version of his favorite real rims. Subscribed gotta see where this goes! !!

Sent from my SGH-T889 using Tapatalk

Re: {{{class 3 caddy}}}
 

Thats my boy"thumbsup" His Caddy will be at champs also.

Great start to the rig, I have another caddy body myself that may end up in my sons hands to build a TTC rig with.

Re: {{{class 3 caddy}}}
 

Thanx fellas these are the orig. Stars w/ the VP logo

Right on. Stoaked on the re release.

Sent from my SGH-T889 using Tapatalk

Re: {{{class 3 caddy}}}
 

Custom front axle 3-link/ D-ring mount for winching down the front in those nasty spots!! 8)

http://www.usca-rc.com/download/file.php?id=2098&t=1

http://www.usca-rc.com/download/file.php?id=2099

Re: {{{class 3 caddy}}}
 

Mounted up!
http://www.usca-rc.com/download/file.php?id=2100&t=1

http://www.usca-rc.com/download/file.php?id=2101&t=1

http://www.usca-rc.com/download/file.php?id=2102&t=1