The beast!!

[VP Dan]

Originally Posted by cboggs

I have a few questions, your running the Tekin Pro4 4000 motor correct? Why did you chose this motor over say the 3000 HD? What battery are you using? Same question to dan w if you read this.

with mine htting the sales at 10.5 lbs i need the low end grunt and the great top end the 4000 pro 4 gives and thats all with a5000 35c 3s lipo

[northkona]

Originally Posted by Wheels7

Nice Job Mike!! How are you liking the suicide switch steering setup?

+1 , when I first saw that pic I thought the link was somehow running behind the servo horn but now I see your 2 drag links.

[turbodan13]

Hey Doc, question about the sway bars... I've got a set of the Axial Wraith ones, but the torsion rod is the exact same length as the mounting tube on my Beast. Chassis tube is 90mm F & 92mm R, while the torsion rod is 90mm. Are the torsion rods on the Hot Racing kit longer than the OEM ones?

Thanks!

[doublej]

I think he used music wire and cut his own, then shaved the center till it has the desired spring rate.

[twissted]

I know you gave up on the IFS front end but you could have tried the traxxas summit front end and used a locking diff when needed and open when you need the steering. Just a thought.

[UPSrat]

Originally Posted by turbodan13

Hey Doc, question about the sway bars... I've got a set of the Axial Wraith ones, but the torsion rod is the exact same length as the mounting tube on my Beast. Chassis tube is 90mm F & 92mm R, while the torsion rod is 90mm. Are the torsion rods on the Hot Racing kit longer than the OEM ones?

Thanks!

You will need the hot racing swaybar kit. It fits it perfect!!!

[TheRockRanger]

Nice build! Do you the length, width, height and wb by any chance?

[The Doc]

Originally Posted by turbodan13

Hey Doc, question about the sway bars... I've got a set of the Axial Wraith ones, but the torsion rod is the exact same length as the mounting tube on my Beast. Chassis tube is 90mm F & 92mm R, while the torsion rod is 90mm. Are the torsion rods on the Hot Racing kit longer than the OEM ones?

Thanks!

yep, use the hot bodys one and sand down the bar to get it to flex how you want it too. But find some other arms, theirs suck. I made my own and was going to sell them but at this time that fell through.

Originally Posted by twissted

I know you gave up on the IFS front end but you could have tried the traxxas summit front end and used a locking diff when needed and open when you need the steering. Just a thought.

Never thought about it, but it could be more stuff to go wrong, don't know. But Thanks.

Originally Posted by UPSrat

You will need the hot racing swaybar kit. It fits it perfect!!!

What he said