Wraith u4 style kinda build

[boxhead1990]

So I built this rig from just a already modded wraith cage

Then traded some.scx10 bits I didnt require anymore for a skid diffs tranny ect

So far the list of things iv changed added

13.5t sct trackstar
80a hobbyking xcar esc
Mr links bent link kit with traxxas rod ends
Beefy rc burley tubes
Unknown alloy c hubs and knuckles(were amongst the lot I bought to get this build underway)
Hitech 7954
Castle bec
Diy electronics tray
Junfac carbon steel shafts
Axial ocp uni's
Topcad beadlocks
2.2 rc4wd gauntlets
Junfac tranny gears
Duratrax 56t 32p spur
14t 32p pinion












So im finally getting to the point where im not suffering breakages every run and only bending lower front links when I run.into things unintentially haha

[boxhead1990]

added yeti 14t pinion and a delrin 32p 56t spur from a duratrax

also installed some jazzrider gears (will be upgrading input shaft at some point and looking to change to hot racing c's and knuckles too

will also be going on the hunt for some ally sheet to do my final panels from too very soon

boxy.