Szczerba's 2.2 XTV
 

Based off Tanner's 4x4 XTV single seater.

Shouted out mcrawlinslow at KRB Kustumz to get me a starter chassis going. Need a Class 3 scalish rig for the East Coast Scale Challenge coming up very soon.

1:1
http://img.tapatalk.com/d/14/08/07/a8y5eme3.jpg
http://img.tapatalk.com/d/14/08/07/3u5y4a6a.jpg
http://img.tapatalk.com/d/14/08/07/tymuza4e.jpg

Less than a week later I had this sitting in my shop. Great chassis to start working with.
http://img.tapatalk.com/d/14/08/07/yvesygyv.jpg
http://img.tapatalk.com/d/14/08/07/e2y8amy7.jpg

Re: Szczerba's 2.2 XTV
 

Hell yeah!

Looks awesome. My class3 buggy is very similar. Based off the old Rockware single seater xrra / we rock buggy!

Mine performs awesome.

In my honest opinion, that is what class 3 is all about! Comp buggies!

Looking forward to seeing this come together.

Refreshing actually.

Szczerba's 2.2 XTV
 

Thanks. I have another comp style starter chassis being built by another vendor
too. It's a little more non-traditional.

New Gold Ottsix Voodoo U4's
http://img.tapatalk.com/d/14/08/07/a9a7azy3.jpg

Crawler Innovations 6 Bolt wheels
http://img.tapatalk.com/d/14/08/07/ety7uvep.jpg

Crawler Innovations foams
Wild Dueces out back, Double Dueces up front.
http://img.tapatalk.com/d/14/08/07/atepunen.jpg

Some axle parts.
Dinky servo mounts.
Vanquish lockers with OD/UD gears
Vanquish AL front wraith axle housing (not pictured)
Vanquish knuckles, chubs and tie rod
Stock rear plastic housing
http://img.tapatalk.com/d/14/08/07/be7ameqy.jpg

Re: Szczerba's 2.2 XTV
 

That is a great looking chassis. This will be a cool build.

Re: Szczerba's 2.2 XTV
 

I'm intrigued to see where you take this chassis. Any hints on the power plant?

Dna

Szczerba's 2.2 XTV
 

You wont have to wait long. I am on a deadline!


Vanquish AL AX10 trans case, all
Metal internals, 32p gears
HolmesHobbies 13.5 BL Sensored TrailMaster
Losi SCTE (Castle MMP clone) and BEC. All coated in liquid electrical tape
http://img.tapatalk.com/d/14/08/07/yhu3epum.jpg

Going with RPM dual rate pistons, 3 different rates in this "light" set. Going with the lightest damping piston and will Tune with shock oil
Traxxas 4" Big Bores
http://img.tapatalk.com/d/14/08/07/usuzu9a5.jpg

KMS Free Spool 180oz winch
HeyOk 4amp Winch controller
RC Rock armor fairlead
RC4WD orange tow shackles
http://img.tapatalk.com/d/14/08/07/uhy2u3y4.jpg

Szczerba's 2.2 XTV
 

Axles
7950th up front and a 7954sh out back. Going with axle mounted servos to save me some time.
Also, going with the stock skid upper link geo since the Dinky RC mounts raise the uppers at the axle.
Added some support bars here and there
And reworked the front shock position. Cut the hoops and lowered them about a 1/4" and mounted the shocks on the back side of the mount.
http://img.tapatalk.com/d/14/08/07/du2upata.jpg
Rear
http://img.tapatalk.com/d/14/08/07/bu3ypuby.jpg
Front
http://img.tapatalk.com/d/14/08/07/4abydypy.jpg
Some clearancing
http://img.tapatalk.com/d/14/08/07/my8yneta.jpg

Re: Szczerba's 2.2 XTV
 

Brotastic bro! "thumbsup"

Re: Szczerba's 2.2 XTV
 

Brosure, brah

http://img.tapatalk.com/d/14/08/07/e8ysumeb.jpg

Re: Szczerba's 2.2 XTV
 

So cool seeing it as a roller. Proportions look spot on. Glad you are doing 4WS. So fun in a comp buggy.

I am assuming you will have a 2-D shell with a battery next to motor?

Re: Szczerba's 2.2 XTV
 

good

Re: Szczerba's 2.2 XTV
 

Thanks. The more replies, the more pics I post. :)

Still working on layout. Battery will be one top of motor or behind cab. I could fit it up under the hood but I dont have time to do
Surgery up there
Making sure a 2200 fits but may run a smaller pack. Puts alot of weight on that side of chassis.
http://img.tapatalk.com/d/14/08/07/esebedu6.jpg
http://img.tapatalk.com/d/14/08/07/sa3une7a.jpg

http://img.tapatalk.com/d/14/08/07/nejyme4u.jpg
http://img.tapatalk.com/d/14/08/07/a3a2e3u8.jpg
http://img.tapatalk.com/d/14/08/07/hyme4yba.jpg

Re: Szczerba's 2.2 XTV
 

Yes. Shocks are good
http://img.tapatalk.com/d/14/08/07/tuqagy2u.jpg

Re: Szczerba's 2.2 XTV
 

Looks like you got it figured out.

a 3D printed motor for the rear would complete the overall aesthetic of the 1:1.

Re: Szczerba's 2.2 XTV
 

digin that last profile shot.
the lowered shock towers look agressive.

Re: Szczerba's 2.2 XTV
 

those were my two cents


I'll accept 4 cents in my paypal, Thanks OP

Re: Szczerba's 2.2 XTV
 

This is all i have for now. See below. Shoutout to RolandRockShop for this piece.


To me a mix of comp buggy/almost rock bouncer. I will lean towards comp buggy.


Shoutout to Helhedded, as he is one of my "scale advisors" and did mention to lower the front shock hoops.

http://img.tapatalk.com/d/14/08/08/eqyne7uh.jpg

Re: Szczerba's 2.2 XTV
 

Thinking about chopping it up right here. http://img.tapatalk.com/d/14/08/08/ereqeqy8.jpg

Re: Szczerba's 2.2 XTV
 

Stuff up front
http://img.tapatalk.com/d/14/08/08/tabe7e5y.jpg
http://img.tapatalk.com/d/14/08/08/a3y5emev.jpg

Re: Szczerba's 2.2 XTV
 

Things looking sick