Re: #BRODOZER - Class 3 F350 - Diesel brothers rock buggy Replica
 

Awesome job!!! Totally frecken sweet.. Hats off to you for using it to I got three self queens I want to just take them out and bet the crap out of them but I just can't,, and I know I can fix easy if I brake but I can't do it lol !!! again great work and hats of to ya my RC friend for braking her in!!!

Re: #BRODOZER - Class 3 F350 - Diesel brothers rock buggy Replica
 

Thanks Chuck! I think if the old Sami tuber were there it would have been an even matchup in the tugowar.

Thanks man! I love to build em more than run to be honest. But I can't just leave em alone. The chassis is super easy to deal with if it breaks. The body is more of a challenge due to the fact it's custom made from two. But it's just too dang fun out on the trail to leave it at home!!

#BRODOZER - Class 3 F350 - Diesel brothers rock buggy Replica
 

Superdrty and I went over to Phil's after work yesterday. Had a great time on the trails. However. I lost one front drive wheel about 5min in and the other front one right before we finished.

Snapped both front drive pins for the hexes.

http://uploads.tapatalk-cdn.com/2016...abc67f5925.jpg

http://uploads.tapatalk-cdn.com/2016...669549a38f.jpg

This is the first time I've ever snapped those pins on any rig ever. Including all my heavy brushless rigs in the past. Not sure if it was the pins or what. The pins and the hexes were brand new going into this build. I may try some proline clamping hexes for the slash...

One of the downsides to the rc4wd militants is that they use the flat 12mm hex. Not the bigger one like comes standard on the wraith.

Sent from my iPhone using Tapatalk

Re: #BRODOZER - Class 3 F350 - Diesel brothers rock buggy Replica
 

Have you ever tried gunner hex pins?

149 r/c worx team driver

Re: #BRODOZER - Class 3 F350 - Diesel brothers rock buggy Replica
 

No but since he uses music wire I might just pick some up from the hardware store and make my own.

It's weird that the rear ones have had no issues. They have taken a serious beating.

Re: #BRODOZER - Class 3 F350 - Diesel brothers rock buggy Replica
 

I love the ssd diamond axles. But the one gripe I've had since the beginning is the relatively loose fit on the chubs. Tcs crawlers had a sale on vanquish parts so I ordered up some scale vanquish chubs.

Let me tell you. These fit super tight and then you add the clamping feature and bam, ready to rock. The gray color isn't dead on but close enough.

Plus I needed to put some vanquish bushings in the knuckles.

http://uploads.tapatalk-cdn.com/2016...afce064ee1.jpg

http://uploads.tapatalk-cdn.com/2016...83973dc56b.jpg

http://uploads.tapatalk-cdn.com/2016...c932b12645.jpg


Sent from my iPhone using Tapatalk

Re: #BRODOZER - Class 3 F350 - Diesel brothers rock buggy Replica
 

Looks good. I love my clamping hubs.

Re: #BRODOZER - Class 3 F350 - Diesel brothers rock buggy Replica
 

I took the Brodozer to the comp in Two Harbors just for fun. I ended up running it on one of the courses for fun. Even at 11 lbs and 15" wb I made it thru course 2 with 4 reverses and 1 rollover. Using rear steer of course lol. The same course I ran out of time with my comp truck. Sadly we don't allow rear steer on comp trucks.

http://uploads.tapatalk-cdn.com/2016...0fd2baccc3.jpg

http://uploads.tapatalk-cdn.com/2016...85d6fe0712.jpg

http://uploads.tapatalk-cdn.com/2016...3814da470e.jpg




Sent from my iPad using Tapatalk

Re: #BRODOZER - Class 3 F350 - Diesel brothers rock buggy Replica
 

Easily my favorite build I've seen on here so far this thing is so cool!!! great job on the build!

Re: #BRODOZER - Class 3 F350 - Diesel brothers rock buggy Replica
 

Thanks man!

She is definitely my favorite build I've done to date. Super fun to drive and amazingly capable considering the size and weight. Other than shearing the two front hex pins she's been really robust too.


Sent from my iPhone using Tapatalk

Re: #BRODOZER - Class 3 F350 - Diesel brothers rock buggy Replica
 

Did you make you hex pins? I got mine from gunnar, I twisted the top shaft pins in the transmission in my 6x6. I went ahead and changed all the pin in the whole thing hopefully less down time.

149 r/c worx team driver

Re: #BRODOZER - Class 3 F350 - Diesel brothers rock buggy Replica
 

That's one really nice truck you have there. I have an F-350 2.2 rig too, not quite as nice, but people usually have the term 'beast' or 'awesome' in their looking it over. I'm sure you hear those descriptive terms frequently.

Has anyone put in first dibs on it if you sell it? If not, I just did!

Re: #BRODOZER - Class 3 F350 - Diesel brothers rock buggy Replica
 

Not yet. I just put in some replacements. My local hardware store was out of the right dia music wire. These have been holding up so we'll see what I do next.


Thanks man! Yes I get a lot of comments and looks. Especially with the sound card making that deep diesel sound.

I think you're about 4th in line of people offering to buy it. We'll have to see after this season what I do with it ;)




Sent from my iPhone using Tapatalk

Re: #BRODOZER - Class 3 F350 - Diesel brothers rock buggy Replica
 

Awesome, simply awesome.

#BRODOZER - Class 3 F350 - Diesel brothers rock buggy Replica
 

Thanks man !

Just a small update. I ordered 1230 servos for the supersix but figured why not use then here instead. So I swapped out the 1231s for 56oz more of torque and some grey Robitronic arms.

http://uploads.tapatalk-cdn.com/2016...9e44dd17bf.jpg

There was a trail run gtg tonight I stopped by and got the dozer on the obstacles. Even at 11lbs she can pull some lines...thanks to rear steer lol

http://uploads.tapatalk-cdn.com/2016...16940b3008.jpg

http://uploads.tapatalk-cdn.com/2016...f418238876.jpg

http://uploads.tapatalk-cdn.com/2016...557fe0df91.jpg

http://uploads.tapatalk-cdn.com/2016...1d5f34ba57.jpg



Sent from my iPad using Tapatalk

Re: #BRODOZER - Class 3 F350 - Diesel brothers rock buggy Replica
 

Hoping my name is still at the top of this list!!!!! 😉

Re: #BRODOZER - Class 3 F350 - Diesel brothers rock buggy Replica
 

this thing is unbelievable, nice work, definitely one of my favorite builds!

Re: #BRODOZER - Class 3 F350 - Diesel brothers rock buggy Replica
 

Ha, yes you are...but it will be a while.


Thanks dude, I appreciate the feedback.

Small update.

Since I sold the FJ 40 sans electronics. I decided to throw in the roc412 2300kv into this rig. Love the control of that motor vs the 3100. Plus running on 4s is all kinds of fun. I had it installed in a full bombproof trans so now the Brodozer is ready for some hardcore abuse.

http://uploads.tapatalk-cdn.com/2016...e5bc65729b.jpg




Sent from my iPhone using Tapatalk

Re: #BRODOZER - Class 3 F350 - Diesel brothers rock buggy Replica
 

And now it begins. The refresh before crawlapalooza. Need to fix a few things and check bearings and change up the electronics a bit.

http://uploads.tapatalk-cdn.com/2016...0f3507d313.jpg

http://uploads.tapatalk-cdn.com/2016...97cb1f42ab.jpg

This last one is just to show the kink in the roof rack.

http://uploads.tapatalk-cdn.com/2016...f37f2b5c40.jpg


Sent from my iPad using Tapatalk

Re: #BRODOZER - Class 3 F350 - Diesel brothers rock buggy Replica
 

I started working on the body to repaint it. Let's just say that the color that was on there was barely holding on. I was able to peel a bunch off the cab and peeled the hood clean.

http://uploads.tapatalk-cdn.com/2016...7a50183e36.jpg

http://uploads.tapatalk-cdn.com/2016...eb4b8ec535.jpg

http://uploads.tapatalk-cdn.com/2016...190420380a.jpg

http://uploads.tapatalk-cdn.com/2016...9375298ad7.jpg.

This is the only body I've ever had problems painting over a polycarbonate paint with regular spray paint. I'm not sure if it's because I use duratrax black instead of tamiya or if it was the cat yellow I used??.....

Either way it'll be fresh for crawlapalooza.


Sent from my iPad using Tapatalk