RCCrawler Forums

Gavin Ayala · 12-09-2018, 10:16 AM

Thank you Casey for building this clean machine.
I have pictures of what Timly looked like when Casey sent it back with the new link tabs welded and I will Be updateing the thread.

Gavin Ayala · 12-09-2018, 10:24 AM

What Timely looked like before it was sent to Casey.

Casey TIG welded new link tabs and added some bracing to the spare tire tube along with a radiator mount and a 2 inch Vanquish Products light bar in the front and a 4 inch Vanquish Products light bar main.

Gavin Ayala · 12-09-2018, 10:36 AM

More

The new machined brace.

I built Timely right up and wrapped the panels in orange with silver. The tire/wheel and foam combo is:
CWR-5004 1.50" width 6 Bolt wheels
CWR-3003 Deuce's Wild Standard foams (front and rear)
CWR-3015 Deuce's Wild Tuning Disc Set (one disc, on the outside of the foams in all four tires)
PB9008NK Pitbull Tires 2.2 Growlers with hand cut CI pattern

Pictures

Gavin Ayala · 12-09-2018, 10:38 AM

More

Gavin Ayala · 12-09-2018, 10:41 AM

More

Gavin Ayala · 12-09-2018, 10:49 AM

These Pitbull Growlers got 6 battery packs on them

.

New BFG All-Terrain tires on Crawler Innovations 6 Bolt wheel and foams.

Gavin Ayala · 12-09-2018, 10:53 AM

Pics

Rebuild

Gavin Ayala · 12-09-2018, 11:16 AM

After the rebuild I put slicks on Timely

and drove on the street with Nova's Ark and Nova's Ark was driving a 2wd slash and we crashed on the street and Timely took a good tumble and the carbon fiber servo/upper link mount plate cracked and the chassis got tweaked..

I made a new plate out of 1/8 aluminum I never took any pictures of it. I also straightened the chassis best I could. I put Timely all back together and on the second battery the upper rear link mount ripped out again.
Pictures

You can barely see the aluminum servo mount in this picture.

I took Timely apart and cleaned everything. Timely now just sits on the shelf as a bare chassis. The parts from Timely have not yet been used in a new build yet.

Almighty Malach · 12-10-2018, 02:05 AM

I still have a chunk of ti plate on the water jet guy's desk, if you're feeling up to welding titanium I can have beefier plates cut out. Extending the link tabs up and forwards should give enough surface area to stay together.

Gavin Ayala · 12-11-2018, 03:52 PM

Quote:

Originally Posted by Almighty Malach

I still have a chunk of ti plate on the water jet guy's desk, if you're feeling up to welding titanium I can have beefier plates cut out. Extending the link tabs up and forwards should give enough surface area to stay together.

Hmmm. I dont have a purge block or a correct cup to TIG weld titanium at the moment. The weld broke from what looks like contamination I dont think any tab will work since the tube is contaminated with two welds what do you think?

Thank You

-Gavin

Stray · 01-13-2019, 07:13 PM

Quote:

Originally Posted by Almighty Malach

Parts are en route thanks to Superstition Machine Works

Where can I buy that??

RCAddiction · 01-31-2019, 01:35 PM

Thats badass! Looks ready to take a beating.

12-09-2018, 10:16 AM	#21
Gavin Ayala Quarry Creeper Join Date: Aug 2017 Location: Tyler Posts: 414	Re: TImely - 2.2 Dual Trailing Arm, Titanium rod Ultra 4 Thank you Casey for building this clean machine. I have pictures of what Timly looked like when Casey sent it back with the new link tabs welded and I will Be updateing the thread. Last edited by Gavin Ayala; 12-09-2018 at 11:16 AM.

12-09-2018, 10:24 AM	#22
Gavin Ayala Quarry Creeper Join Date: Aug 2017 Location: Tyler Posts: 414	Re: TImely - 2.2 Dual Trailing Arm, Titanium rod Ultra 4 What Timely looked like before it was sent to Casey. Casey TIG welded new link tabs and added some bracing to the spare tire tube along with a radiator mount and a 2 inch Vanquish Products light bar in the front and a 4 inch Vanquish Products light bar main.

12-09-2018, 10:36 AM	#23
Gavin Ayala Quarry Creeper Join Date: Aug 2017 Location: Tyler Posts: 414	Re: TImely - 2.2 Dual Trailing Arm, Titanium rod Ultra 4 More The new machined brace. I built Timely right up and wrapped the panels in orange with silver. The tire/wheel and foam combo is: CWR-5004 1.50" width 6 Bolt wheels CWR-3003 Deuce's Wild Standard foams (front and rear) CWR-3015 Deuce's Wild Tuning Disc Set (one disc, on the outside of the foams in all four tires) PB9008NK Pitbull Tires 2.2 Growlers with hand cut CI pattern Pictures

12-09-2018, 10:38 AM	#24
Gavin Ayala Quarry Creeper Join Date: Aug 2017 Location: Tyler Posts: 414	Re: TImely - 2.2 Dual Trailing Arm, Titanium rod Ultra 4 More

12-09-2018, 10:41 AM	#25
Gavin Ayala Quarry Creeper Join Date: Aug 2017 Location: Tyler Posts: 414	Re: TImely - 2.2 Dual Trailing Arm, Titanium rod Ultra 4 More

12-09-2018, 10:49 AM	#26
Gavin Ayala Quarry Creeper Join Date: Aug 2017 Location: Tyler Posts: 414	Re: TImely - 2.2 Dual Trailing Arm, Titanium rod Ultra 4 These Pitbull Growlers got 6 battery packs on them. New BFG All-Terrain tires on Crawler Innovations 6 Bolt wheel and foams.

12-09-2018, 10:53 AM	#27
Gavin Ayala Quarry Creeper Join Date: Aug 2017 Location: Tyler Posts: 414	Re: TImely - 2.2 Dual Trailing Arm, Titanium rod Ultra 4 Pics Rebuild

12-09-2018, 11:16 AM	#28
Gavin Ayala Quarry Creeper Join Date: Aug 2017 Location: Tyler Posts: 414	Re: TImely - 2.2 Dual Trailing Arm, Titanium rod Ultra 4 After the rebuild I put slicks on Timely and drove on the street with Nova's Ark and Nova's Ark was driving a 2wd slash and we crashed on the street and Timely took a good tumble and the carbon fiber servo/upper link mount plate cracked and the chassis got tweaked.. I made a new plate out of 1/8 aluminum I never took any pictures of it. I also straightened the chassis best I could. I put Timely all back together and on the second battery the upper rear link mount ripped out again. Pictures You can barely see the aluminum servo mount in this picture. I took Timely apart and cleaned everything. Timely now just sits on the shelf as a bare chassis. The parts from Timely have not yet been used in a new build yet.

12-10-2018, 02:05 AM	#29
Almighty Malach RCC Addict Join Date: Feb 2008 Location: Crawlerado Posts: 1,411	Re: TImely - 2.2 Dual Trailing Arm, Titanium rod Ultra 4 I still have a chunk of ti plate on the water jet guy's desk, if you're feeling up to welding titanium I can have beefier plates cut out. Extending the link tabs up and forwards should give enough surface area to stay together.

01-31-2019, 01:35 PM	#32
RCAddiction Newbie Join Date: Oct 2008 Location: Richmond, KY. Posts: 32	Re: TImely - 2.2 Dual Trailing Arm, Titanium rod Ultra 4 Thats badass! Looks ready to take a beating.

TImely - 2.2 Dual Trailing Arm, Titanium rod Ultra 4 - Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Anyone done a trailing arm rear suspension?	95geo	Axial Wraith	26	09-03-2013 11:07 PM
Trailing Arm Suspension for a trailer	neillarson	General Scale Talk	11	07-03-2011 09:15 PM
Shortcourse 4-link vs. trailing arm	desertmaxx	Non Crawler RC's	4	09-07-2010 06:40 PM
trailing arm links	mookie	Redcat Crawlers	6	07-07-2010 06:43 PM

Sponsored Links

RCCrawler Forums

Thread: TImely - 2.2 Dual Trailing Arm, Titanium rod Ultra 4