Truggy/Wroncho Build Questions
 

I'm thinking about dismantling my Wraith to do a Truggy or a Wroncho type build with the SCX10 II chassis. I'm guessing that I need the chassis rails, driveshafts, Upper and lower links, shocked towers, battery tray, f/r bumpers. What else am I missing?

Also, I would also need 2.2 aluminum beadlocks. A good set that won't break the bank. The Axial beadlocks I have now rub on the links when I turn both left and right. The offset isn't right. What would you suggest?

Thanks!

Sent from my LM-G710VM using Tapatalk

Re: Truggy/Wroncho Build Questions
 

Heres the links that were on the wroncho project i bought n used for my monster truck build. Idk how well the 2.2s will turn w/out rubbin these. But my 2.6 PL brawler/destroyers rub a lil at full turn with +14mm wideners.

rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F36 2485345855

Sent from my SM-J327VPP using Tapatalk

Re: Truggy/Wroncho Build Questions
 

Lets see if this one will work lol

https://rover.ebay.com/rover/0/0/0?m...2F362485345855

Sent from my SM-J327VPP using Tapatalk

Re: Truggy/Wroncho Build Questions
 

The link doesn't seem to be working.

Sent from my LM-G710VM using Tapatalk

Re: Truggy/Wroncho Build Questions
 

Never mind your new Link Works. I'm going to be using an Axial SCX10 II chassis which has a shorter wheelbase.

Sent from my LM-G710VM using Tapatalk

Re: Truggy/Wroncho Build Questions
 

Thats wat chassis that wroncho project was based on. I just converted it to a m/t lol. With those links my wb is 13.25"

Sent from my SM-J327VPP using Tapatalk

Re: Truggy/Wroncho Build Questions
 

Do you have a link for that specific wroncho project?

Sent from my LM-G710VM using Tapatalk

Re: Truggy/Wroncho Build Questions
 

Re: Truggy/Wroncho Build Questions
 

This link takes me to Google homepage for some reason

Sent from my LM-G710VM using Tapatalk

Re: Truggy/Wroncho Build Questions
 

I got it from the market place on here. I dont remember who i got it from though. But it was a 10 ii chassis with ar60 axles

Sent from my SM-J327VPP using Tapatalk

Re: Truggy/Wroncho Build Questions
 

This conversion is made easy with a set of "wroncho plates", a vendor on here sells them. They essentially mount on the outside of the frame rails in between the rails and sliders. They give a bunch of upper link mounting position options for fine tuning your pinion angle. i'd suggest going with them. I have a set I was holding onto in case I ever wanted to do a low slung mud truck, but if you cant find any, shoot me a PM.

Re: Truggy/Wroncho Build Questions
 

Thanks for the heads up on this. I'll look in the vendor section, but if I don't find them I'll shoot you a PM.

Sent from my LM-G710VM using Tapatalk

Re: Truggy/Wroncho Build Questions
 

I found him. His name is Todd

Sent from my LM-G710VM using Tapatalk

Re: Truggy/Wroncho Build Questions
 

I found him. His name is Todd

Sent from my LM-G710VM using Tapatalk

Re: Truggy/Wroncho Build Questions
 

MAX-D Were you able to order the plates from Todd?

Sent from my SM-T337T using Tapatalk

Re: Truggy/Wroncho Build Questions
 

No, I've been dragging my feet on this project. It might not even happen. I'm thinking about selling my Wraith to finance the new Capra

Sent from my LM-G710VM using Tapatalk

Re: Truggy/Wroncho Build Questions
 

Nice. I just ordered a set for my build. Good luck on your decision lol.

Sent from my SM-T337T using Tapatalk

Re: Truggy/Wroncho Build Questions
 

Start a build thread

Sent from my LM-G710VM using Tapatalk