|
![]() |
| LinkBack | Thread Tools | Display Modes |
![]() | #1 |
Quarry Creeper Join Date: Jun 2013 Location: Portugal
Posts: 255
| ![]()
My good friend TheGamer asked some time ago if I could make him a Dragon Slayer based on a Axial Yeti. Because he's such a nice guy and the truck is interesting, plans were made and a kit was bought and delivered to me The 1:1 beast: ![]() Plan is simple: Leave the Yeti chassis stock and work around it. Full cage with body panels, interior(as possible ,fake engine(because it's so exposed) and lights The blueprint for the cage was provided by a fellow RCcrawler user(nsimps) that did one before and cut out some of the work for me.. First steps: ![]() ![]() ![]() ![]() ![]() disclaimer: the build pics are not great because most of them were taken at night and were just for showing the progress to TheGamer |
![]() | ![]() |
Sponsored Links | |
![]() | #2 |
Quarry Creeper Join Date: Jun 2013 Location: Portugal
Posts: 255
| ![]()
A thing that I needed to have was the sway bar. Here in the 1:1(notice the lack of the extra fuel tank hanging of the rear): ![]() Mine is far from looking like the actual Antirock sway bar because praticality and function. This buggy will be ride hard and everything needs to last. But has the same pivot point which is important. For that same reason, I couldn't use yeti stock sway bar rod(for the spring steel) but i ended using the same spring steel bar I put on the M548,but this time 2 pieces together. Has the spring feature,returning to straightness every time They'll be painted black in the future ![]() ![]() |
![]() | ![]() |
![]() | #3 |
RCC Addict ![]() Join Date: Jun 2006 Location: Here
Posts: 1,917
| ![]()
Video no worky!
|
![]() | ![]() |
![]() | #4 |
Quarry Creeper Join Date: Jun 2013 Location: Portugal
Posts: 255
| ![]() |
![]() | ![]() |
![]() | #5 |
Quarry Creeper Join Date: Feb 2018 Location: East otis
Posts: 271
| ![]()
Videos are set to private Sent from my SM-G970U using Tapatalk |
![]() | ![]() |
![]() | #6 |
Quarry Creeper Join Date: Jun 2013 Location: Portugal
Posts: 255
| ![]() I got my videos set to Private by default. didn't notice. sorry... Roof lights: Ordered a cheap 4 LED spotlight set to use on this build but found them to be a bit small. Designed and printed bigger ones that fitted with lenses from a broken car light .They also have a printed neon green surround ring, not in photos ![]() ![]() ![]() ![]() ![]() Last edited by cooper_xl; 02-26-2021 at 04:58 PM. |
![]() | ![]() |
![]() | #7 |
Quarry Creeper Join Date: Jun 2013 Location: Portugal
Posts: 255
| ![]()
Body panels are been created with a mix with 3D prints and PVC sheet . I'd love the 3d print them but there's to many angles to pull that off "Hood" ![]() ![]() ![]() ![]() The cockpit divider, behind the driver, with the radiator mesh ![]() Also tried to print the small window's mesh in TPU. Went well. They didn't even need anything after printing ![]() ![]() |
![]() | ![]() |
![]() | #8 |
Rock Crawler Join Date: Dec 2014 Location: So Cal
Posts: 883
| ![]()
Nice bodywork, great details. ![]() |
![]() | ![]() |
![]() | #9 |
Quarry Creeper Join Date: Jun 2013 Location: Portugal
Posts: 255
| ![]() Thanks! 3D printed a LS V8 found on thingiverse, only made different valve covers for the engine itself. Because this engine has unique exhaust headers passing above the engine, had to do them . After trying different methods, printed the flanges and printed several straight tubes that bent with heat to the shape desired. The last section of exhaust, was also 3D printed but required no modifications ![]() ![]() ![]() ![]() The real one: ![]() next will be the air filters and tubing for the intake |
![]() | ![]() |
![]() |
![]() | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Project Dragon Slayer GOM | mewalsh100 | G-Made Crawlers | 65 | 10-23-2020 07:25 AM |
Cambpell Racing Dragon Slayer | nsimps | Axial Yeti | 79 | 04-05-2018 02:51 PM |
EmeryworX yeti XL dragon slayer chassis | tuner | Axial Yeti XL | 9 | 06-19-2017 01:28 PM |
Thread Tools | |
Display Modes | |
| |