Go Back   RCCrawler Forums > Scale Rigs General Tech > 2.2 Scale Rigs
Loading

Notices

Thread: Project TTC

Reply
 
LinkBack Thread Tools Display Modes
Old 06-12-2010, 09:32 PM   #1
Quarry Creeper
 
Join Date: Nov 2009
Location: East Bay
Posts: 350
Default Project TTC

So I know I am In the middle of the Rock Racer, but I have caught the bug and am starting a TTC rig..I have already started to collect parts..

Specs
--------------------------

Twin 30T motors

Twin Disruptor Transmissions

Punk dig

3 cell lipo

Axial SX10 frame...? if I don't build my own

Losi comp crawler axles

2.2 RC4WD Rock crushers

Still undecided on the rims and speed control? I need something water proof
and that can handle a three or four cell lipo...

I fell in love with this last year...I wanted to build a 1:1 version just don't have the time since I sold my last beast based off a 72 Blazer..so much time and money not to get picked after that I gave up and parted it out ...,but any way here are some pics of what my 2.2 scale rig will be based on

Name:  129_0904_12_z+2009_top_truck_challengers+2008_jeep_tj_buggy.jpg
Views: 1008
Size:  55.0 KB

Name:  129_0906_1536_z+top_truck_challenge_2009+frame_twister.jpg
Views: 899
Size:  50.0 KB

Name:  129_0906_1941_z+top_truck_challenge_2009+mini_rubicon.jpg
Views: 899
Size:  52.8 KB

rim choices

Name:  DSC_2826.jpg
Views: 895
Size:  31.8 KB

Name:  sax03.jpg
Views: 959
Size:  28.2 KB

motor trans lay out

Name:  untitled.jpg
Views: 883
Size:  18.3 KB

More to come....I cant wait !!!!!!!!!!!!!!!!!!!!!




Last edited by Gardetto; 06-12-2010 at 11:02 PM. Reason: I'm just dumb
Gardetto is offline   Reply With Quote
Sponsored Links
Old 06-12-2010, 10:38 PM   #2
I joined the Band!
 
Join Date: Mar 2010
Location: nashville,TN
Posts: 405
Default

subscribed
crawlinnTN is offline   Reply With Quote
Old 06-12-2010, 10:52 PM   #3
I wanna be Dave
 
Join Date: Feb 2004
Location: Columbia Gorge
Posts: 5,512
Default

Quote:
Originally Posted by Gardetto View Post
[SIZE=3][COLOR=DarkOrange]So I know I am In the middle of the Rock Racer, but I have caught the bug and am starting a TCC rig..I have already started to collect parts..


What's a "TCC" rig?? Do you mean TTC, as in Top Truck Challenge?
toyofast is offline   Reply With Quote
Old 06-12-2010, 10:59 PM   #4
Quarry Creeper
 
Join Date: Nov 2009
Location: East Bay
Posts: 350
Default

Quote:
Originally Posted by toyofast View Post
What's a "TCC" rig?? Do you mean TTC, as in Top Truck Challenge?

To many Beers again TTC you think living an hour from where it is held and entering my 1:1 rig my dumb ass would have abbreviated it right Fixed do you know if it will be corrected on the main page..it did not change when I edited it ?

Last edited by Gardetto; 06-12-2010 at 11:04 PM.
Gardetto is offline   Reply With Quote
Old 06-12-2010, 11:12 PM   #5
RCC Addict
 
Join Date: May 2009
Location: NHFF world headquarters, working on the "rock mauling hill shooting NHFF pig squealing death rocket"
Posts: 1,134
Default

Quote:
Originally Posted by crawlinnTN View Post
subscribed
x2
buggy is offline   Reply With Quote
Old 06-13-2010, 09:18 AM   #6
Rock Crawler
 
Join Date: Oct 2009
Location: home town marsing
Posts: 899
Default

It's going to look killer !!!
I always,s like the look of the truggy tuber look. going with the four door look. cool

Last edited by spyderwebbcustoms; 06-14-2010 at 09:57 AM. Reason: misspelled a word
spyderwebbcustoms is offline   Reply With Quote
Old 06-13-2010, 01:07 PM   #7
I wanna be Dave
 
Join Date: Jun 2007
Location: Arlington wa
Posts: 2,100
Default

duel motors!... this will be awesome!
blakeski is offline   Reply With Quote
Old 06-13-2010, 10:06 PM   #8
I wanna be Dave
 
Join Date: Jan 2006
Location: Henderson/Las Vegas, NV
Posts: 5,032
Default

sounds good! ill be watching.
dieselfuel is offline   Reply With Quote
Old 06-14-2010, 01:02 AM   #9
Quarry Creeper
 
Join Date: Nov 2009
Location: East Bay
Posts: 350
Default

Thanks for the replies I am almost done with my other build...and will start tearing into this one.... I should have some pics up this week
Gardetto is offline   Reply With Quote
Old 06-14-2010, 08:25 AM   #10
Pebble Pounder
 
Join Date: May 2008
Location: El Monte
Posts: 177
Default

this is gunna be sick!!
Nick Slemp is offline   Reply With Quote
Old 06-14-2010, 03:31 PM   #11
Rock Stacker
 
Join Date: Jan 2010
Location: Fort Worth
Posts: 50
Default

I have been waiting for someone else to try this, I have been wanting to but cant fund it right now, good luck and im subscribed
82-Toyota-SR5 is offline   Reply With Quote
Old 06-14-2010, 06:10 PM   #12
Quarry Creeper
 
Join Date: Nov 2009
Location: East Bay
Posts: 350
Default

Quote:
Originally Posted by Nick Slemp View Post
this is gunna be sick!!
I cant wait.....I needed to step it up with all these High powered builds

Quote:
Originally Posted by 82-Toyota-SR5 View Post
I have been waiting for someone else to try this, I have been wanting to but cant fund it right now, good luck and im subscribed
Being a Berg owner It just had to give it a shot

Last edited by Gardetto; 06-14-2010 at 06:13 PM.
Gardetto is offline   Reply With Quote
Old 06-15-2010, 06:42 AM   #13
I wanna be Dave
 
Join Date: Mar 2009
Location: SW Missouri
Posts: 2,175
Default

Subscribed, can't wait for this one!
papabash is offline   Reply With Quote
Old 06-18-2010, 12:27 AM   #14
Quarry Creeper
 
Join Date: Nov 2009
Location: East Bay
Posts: 350
Default

Just ordered 12 feet of tubing from McMaster-Carr... Should be here Monday ,But I leave Wed for the AWCC so there will be no updates Till the following week


Part Number: 89955K11 $19.23 Each
Material
Easy-to-Weld Aircraft-Grade 4130 Alloy Steel
Alloy
4130
Finish/Coating
Unpolished (Mill)
Shape
Tubes
Tube Type
Round
Wall Thickness
.035"
Length
6'
Length Tolerance
±1"
Inside Diameter
.118"
Outside Diameter
.1875"
Outside Diameter Tolerance
±0.004"
Tolerance
Standard
Temper/Condition
Half Hard
Hardness
Rockwell C19-C26
Maximum Attainable Hardness
Rockwell C49
Yield Strength
75,000 psi
Specifications Met
Aerospace Material Specifications (AMS), Military Specifications (MIL)
AMS Specification
AMS -T-6736A
MIL Specification
MIL-T-6736B
Gardetto is offline   Reply With Quote
Old 06-21-2010, 06:30 PM   #15
Newbie
 
Join Date: May 2010
Location: Jacksonville
Posts: 45
Default

Subscribed
Chris16695 is offline   Reply With Quote
Old 07-18-2010, 09:36 PM   #16
Newbie
 
Join Date: Aug 2006
Location: jacksonville
Posts: 32
Default

Quote:
Originally Posted by Chris16695 View Post
Subscribed
+1 and now I know what tubing to get/use from MasterCarr for my build.

THANKS FOR THE PART#
yellowallison is offline   Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -6. The time now is 07:29 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com