View Full Version : General Crawlers
- Rod end question
- here are pics of my modifications
- mini lst esc
- fix for broken cup in front stub axle?
- Free Crawlin' II- Vertical Smile Big Bastard
- broken antenna
- is this good?
- Crawling ratio?
- 1:18 range
- Hobbico 910
- Crawler in Production: MLST
- axle movement?
- I Heard It, The Crackling
- nylint wants the defective chassis back???
- quick charger
- RC4WD Giveaway Time!!!
- should i get a tlt?
- 1/18th is available in new colors now
- Walmarts are deleting 1/6th Nylints from thier shelves
- Finally modded......
- Help I Need Info On Axle!!!!!!!
- need more wheel base
- Turning radius / steering ?
- Hello
- Reverse mounted vs. Stock mounted Tires
- my 1/18th scorpion project
- new 1/6th project and purple pig outside
- streching
- 1:18 Nylint kicks the 1:10 Newbright Jeeps butt
- nylint crawler
- Front Stub Shaft Break
- Mounted up some spare TLT tires
- Emaxx shocks
- upgrade electronics
- Different 1/18th Tire Options
- Bruiser axle replacement parts
- LED head and tail lights
- is there a way.......
- My New Nylint
- Run in the Rocks
- Motors and Upgrades
- just felt like showing ya'll
- Internal Spring Shocks
- is it possible to climb stairs with the 1/6th?
- 9 inch strokers
- Locking diffs question.
- clearance prices on 1/6th stuff
- torsen center diff for tmaxx
- Strectched Nylint Quailty design
- How to make a 1/6 body look small...
- nylint tires get new look
- Give me your opinion
- shock spring color
- First Rear Steer problem on 1/6th
- Pics of my 1/18 custom nylint
- courses.......
- painted body and rear shock mounts
- more power
- need rims please
- Nylint Plus Clod Axles
- 1:6 and 1:18 anywhere in Florida?
- HELP!! Nylints on sale in your area..POST UP
- Burned something on the curcuit board! How to fix?
- Few questions on 1:6 nylint tires
- Where can I find a set of 1/18 wheels and tires
- My 2nd 1/18th NyLint
- Axle Stall (clod stall)
- Day at the beach (56K beware)
- Weight
- New vs old Maxx Shocks
- best cut for 1/18th tires
- new battery
- 1/6 or 1/18?
- Un-Unlimited
- Problem With LED's
- Having Problems
- Question for the people using Maxx 105mm turnbuckles!!
- Aluminum or brass over links
- no charging instructions for 1/18th
- easier tummy tuck for 1:18th?
- tummy tuck done [pics]
- mods done so far on my 1/18th
- fender flares on a 1/6th?
- wheelbase
- need some help, trying to fit 2.2's and other misc...
- pictures of my 1/6th nylint on the rocks
- shocks and ESC on a budget
- lower COG with stock arms....in R&D
- New guy here, Lovin the 1:6th Crawler!
- Winch Wiring (connect to motor's circuit)
- 9.6v
- my 1/18th nylint
- radio shack crawler
- Thank you FUNRISE! Replacement parts are starting to arrive!!!!
- 1:6th Still Available?
- 1/18th Body Dimensions?
- I broke my 1/6th nylint.....help
- help me with my 1/6th nylint
- Reattaching 1/6th rims back together
- stuck on tires, which ones to use?
- My PTI Crawler
- 1/6th O Ring ?
- 1/6th Replacement recived...chassis has differences
- How many colors do the 1/18th's come in?
- I'm back! :)
- 1/18th dimensions please...
- new, need more power out of my 1/18th
- how to get front tires off my 1/18th!!
- Body dimensions
- rear tire carrier for 1/6th
- my tubed crawler
- after shifting rear axle wont go sometimes
- Low..Low gear Mod for 1/18th
- weight in the tires?
- Mickey Thompson Baja Claws
- N00B Here! Sayin Hey with my 1:18th
- painting the body?
- * Problem * Clicking Problem on my 1/18th
- fully custom 1/18th nylint [pics updated]
- weekend wheeling
- what do you think of my 1/18th?
- finished-- for now anyways-- PTI Crawler
- low power front on 1/6th
- Root cause of torque twist?
- dual case mod for 1/18th
- Charger on 1/6th ?
- 1/6 Cut the tabs now what?
- Sticked 1:6th Nylint
- shock question
- To Dove or not to Dove that is the Question for 1/18
- 1:6 scorpion $49.00 at walmart
- Can you name this rod end??
- inconsistant tire thicnkess
- My 'new' 1/18th crawler
- And a freinds new PTI rig
- 1:18th Dove, and low low gear, step by step????
- Dissassembly of the 1:6 Scorpion
- #2191 1/6th Red Scorpion Build
- 1:6 MY nyllint on the rocks..
- Think it'll work? --Need suggestions--
- 1:6 Nylint $49.00 What A Deal
- Broken Brand New 1:6th Jeep
- Fed up with Wal*Mart
- how big of rocks?
- 1/6th flex???
- most effective siping pattern for 1/18th tires?
- Short Video. Extreme 1/6th Nylint
- Help!!! Rims off 1:18 NYLINT
- 1:6 Scorpion - Body Painting
- Steering Alignment on the 1/18th
- April Give Away - RC4WD 2.2 Beadlock Wheels
- homemade beadlocks for the 1:6th
- 1:6 Pics of my rig
- 1:18 flipped rear axle problemmm
- I'm Sick of all the Nylint Haters
- Finally got my 1:6,er running again.
- surging and fix (1:6)
- 1:6 New Extreme Nylint Video
- 1:6 replacement wheels
- Why is it...
- Check out this Crawler
- Thinking out loud (water proofing, shocks, tires)
- Another Geofab Build
- rollin on 22s!
- custom parts
- Help Me with a Nylint Crawler
- squishy tires
- Quick 1:6 battery question
- so shocking!?
- New 1/6th Nylint Not Working
- shocks,shocks,shocks
- My Nylint XJ Crawler - Cherokee Laredo
- 1:18 - Weighted Tires
- weight for your crawler
- Floppy wheels?
- crapy range on scorpion
- striping gears help ?? 1/6
- axle motors question
- New here, here is what i got so far
- use protection?
- 1:18 - Trigger Spring
- Best Mod for flex
- Rear slipping??
- Questions about Savage shocks on Nylints
- Gear Lube!!!
- 4-link thought
- A Bit More Width
- 1/18th nylint mlst morph
- need axle help asap
- New 1:6 Scorpion
- ideas?
- tummy tuck
- Help Me!!! In Need Of Some Help.
- best way to waterproof??
- Yard Crawlin Nylint Style
- Customer service needs work
- howdy, heres my, stock, crawler
- chrome hubs?
- my crawler so far
- aftermarket battery
- Belt Slip
- stampede tires
- after market battey
- Just to brag....
- WOO HOO! thanks Nylint
- 4 link the nylint
- 8 1/2 Wide Nylint How To
- Looking for a Nylint 1:6?
- almost finished
- RC4WD shock mounts
- Nyint stick buildup
- clod wheels on a 1/6 nylint
- Help...servo 1/18
- Looking for some parts (axle case,shocks,tires/wheels)
- front steering is popping
- where does the spring go? (1:18)
- Thanks so much nylint!!
- wont turn (1:18)
- Help need a blue turnbuckle!!!!
- Easy suspension mod
- How do i fix my broken chassis?
- Need help FINDING out what Generation
- won't do anything
- lengthing the front
- What grease
- Easy way to search Wal-Marts
- Electronics Question, did i kill it?
- Rearend walking ??
- Nylint wont run
- Ford Ranger body installed
- MLST (One of a Kind)
- Rim Painting
- update___THE HEEP
- another rare red scorpion bought at wally today
- new winch ideal
- Wheel base?
- check this out and tell me if i got my pic working
- 4 yellow scorpions and 2 reds found in Michigan!!!
- tuber in the works
- saying sorry
- chraging system
- Nylint Feedback
- Darn Rivets!
- one more time my stick pic work this time
- nylint wheels
- Stupid newbie battery question.....
- please look need help
- help 1:18 board schematic needed
- Need Tummy Tuck Instructions.
- connecting rod question
vBulletin® v3.8.5, Copyright ©2000-2010, Jelsoft Enterprises Ltd.