Post your Crawlers!

[Mnster]

This is the Illinois Post your crawler thread."thumbsup" Post your crawlers and specs nothing more. Mods please sticky.
Super class clod
http://i3.photobucket.com/albums/y72/silverdude/DSC03727.jpg

2x Hitec 5955TG's
2x Mamba max esc's
2x Hextronic BL motors
Homemade version of a TCS stick with changes.
Moab xl's
Axial 40 series beadlocks
TTR Cvd's
Integy gear sets
Inet C hubs
Castle BEC
Clod Axles



2.2 Comp rig
http://i3.photobucket.com/albums/y72/silverdude/DSC05117.jpg

Custom chassis made from 1/4 brakeline
Hitec 5955tg
Quark33 with a OG revolver
Castle BEC
Full MIP CVD's
TLT axles
Towerpro 995 dig servo
Custom dig setup
Losi Rock claws
Gmade Beadlocks

C-10 Beater truck
http://i3.photobucket.com/albums/y72/silverdude/DSC03740.jpg
Custom chassis cut from 1/2 square tube
Wheely king axles
Leaf sprung
Imex Square tires on stock WK wheels with Gmade beadlock rings.
XRS speedo
Tower pro 995
Custom interrior with John boy behind the wheel and bruiser dash.

Bronco Bruiser
http://i29.photobucket.com/albums/c280/Mnster/495349db.jpg
Stock Bruiser
HPI bronco body
Imex swamp dawgs
Tower pro 995 servo
Runner ESC


Tacoma Jero
http://i3.photobucket.com/albums/y72/silverdude/DSC03839.jpg
Tamiya cc-01 chassis
Radio shack enforcer body
Custom 4 linked rear
Custom sliders and bumper
Custom interrior with Jim driving
Tower pro 945mg for steering.
Tower pro 995mg for winch.
Tower pro mini servo for steering wheel.
LED headlights with custom molded buckets.
Trail doctors on Hpi stock car rims.
Cheap Fly 33 Car esc
Small Crawler store BL motor
Custom gear reduction unit
to much more to list.

Snow Blazer
http://i3.photobucket.com/albums/y72/silverdude/DSC04959.jpg

Mamba max
12 cells
Hacker Bl motor
Tower pro 995
Stock TLT chassis plates modded
Axial axles

[Soya]

http://i96.photobucket.com/albums/l164/cleveryetdull/IM000714-1-1.jpg

Twin Force axles
4.3 Helical gears
aluminum lockers
RC alloys shafts
RC4WD knuckes
Hobbico front servo (420 oz in.)
GWS rear servo (800 oz in.!)
Savage shocks
Custom wideners
Custom tube frame
Custom servo and link mounts
Revo shafts
Emaxx tranny with steel idler
Hyperion outrunner
Castle BEC
Mamba Max with 11.1v 3850 lipo
Jumbo Kongs
Spektrum DX3
probably more stuff I'm forgetting

Also have a comp clod in pieces somewhere.

[MattG]

http://img.photobucket.com/albums/v321/bluecivicguy/003-1.jpg

[clod & bruiser]

representing central illinois!"thumbsup"

novak rooster crawler edition esc
novak fifty-five 55t motor
slight 11 3/4" stretch
rc guy lockers front rear
traxxas driveshafts

http://i169.photobucket.com/albums/u233/Panthers_21/wheely%20king%20bashing/Picture341.jpg

http://i169.photobucket.com/albums/u233/Panthers_21/wheely%20king%20bashing/Picture184.jpg

http://i169.photobucket.com/albums/u233/Panthers_21/wheely%20king%20bashing/Picture155.jpg

[envious8420]

http://www.clodtalk.com/download/file.php?id=22682

txt axles and tranny
1/2x1/2 steel frame rails
everything else is 3/16 or 1/4 steel line
narrowed nylint body
rc4wd alu knuckles
750 bruiser motor on 12v

[clod & bruiser]

http://www.clodtalk.com/download/file.php?id=22682

txt axles and tranny
1/2x1/2 steel frame rails
everything else is 3/16 or 1/4 steel line
narrowed nylint body
rc4wd alu knuckles
750 bruiser motor on 12v


yeah you got me on that pics man i had to quadruple -take on that on! haha awesome truck!

[wrcfan29]

http://i3.photobucket.com/albums/y72/silverdude/DSC05403.jpg

Yeah this is my ax10 that most of you saw at the comp in naperville.

i'm running a clear rockstar body with protective film and a big squid sticker
novak rooster crawler with the 55t motor
hitec 5645mg servo tq-3 radio
pro-line moabs-m3
was running tcs bent links at the comp but now received delrin bent links from xtreme rc

[Slip&Slide]

http://i198.photobucket.com/albums/aa129/ceq75/RCCRAWLERS004-1.jpg
http://i198.photobucket.com/albums/aa129/ceq75/Wkcrawling.jpg
12 IN wheel base
Moabs
Pede wheels died black
7 oz weight in each
55t lathe motor
tazer esc
axle mounted servo
4 link
locked front and rear

[addictedtonitro]

http://i209.photobucket.com/albums/bb88/addictedtonitro/crawlin015.jpg
http://i209.photobucket.com/albums/bb88/addictedtonitro/363.jpg

Jefferson chassis
tlt axles
12.5 wb
pede shafts
pede tranny locked with all steel gears
revo lowers
hpi uppers
maxx shocks
had integy 45t now integy matrix 60t
tekin rebel 2 esc
had moabs on rpm crawler wheels
now rock claws on axial black chrome beadlocks
Proudly representin the south!

[BJoe]

http://img.photobucket.com/albums/v698/bjoehandley/Wheely%20King%204x4/Swimmin6.jpg

[tkd630]

http://i73.photobucket.com/albums/i219/timkasper/DSC02180.jpg

[ghosty1]

http://i36.photobucket.com/albums/e27/jkracecrazy/truck/axial004.jpg

[BJoe]

http://img.photobucket.com/albums/v698/bjoehandley/AX10/HPIM4676.jpg

[xirtic]

2.2 Class
-Reign J2-TT Narrow Chassis
-RC4WD R2D Transmission
-Novak Goat ESC/Motor
-RC4WD Punisher Driveshafts
-Axial HD Gears
-FreakStuff Racing Stainless Steel Lockers
-RCP Rear Lockouts
-CKRC Front C's and Hubs
-TCS Dig Servo Mount
-Cen Skyion 144oz Dig Servo
-Hitec HS-5955TG Steering Servo with aluminum arm
-RockSmith Engineering Titanium Steering Links
-RockSmith Engineering Solid Amuminum Upper Links 70mm
-Custom 5/16" Delrin Bent Lower Links with Traxxas Ends
-Losi Crawler Shocks in a Droop Config (80wt front and 60wt rear)
-Cougar Panther Tires
-Montana Scale Design solid aluminum beadlocks
-Kreepy Red Memory Foams with 1/4" Proline FIRM Foams on the outsides in the front tires.
-Panther Memory Foams with 1/4" Proline FIRM Foams on the outsides of the rear tires.
-Aluminum Hex's
-TCS 4 link rear plate (Delrin)
-TCS 4 link servo mount plate front (Delrin)
-TCS Axle mount battery trays (Delrin)
-Custom lexan ESC tray on front upper links
-EFlight 7.4v 20C 1250mah Lipo
-Spektrum AR6000 RX
-Spektrum DX6 TX (Throttle Spring, Voltage Regulator, Internal Antenna, and DX3.0 Battery Conversion Mods)
-JConcepts RockSteady body

[98tjjeep]

I'm not sure if i can put this here sorry if its a issue.
For sale : axial ax-10 orange (ARTR) with front and rear bent links as well as the stock ones, Q3 radio and receiver, up graded drive shafts, 55 turn Integymotor,Tekin FXR Forward/Reverse Brushed ESC, Hitec hs-5645mg servo, 7.4v-2000mah lithium polymer 2 cell battery with charger, equalizer and power supply. almost new used about 4 or 5 times. will take $375 for all plymouth IN.
http://www.rccrawler.com/forum/images/statusicon/user_online.gif http://www.rccrawler.com/forum/images/buttons/report.gif (http://www.rccrawler.com/forum/report.php?p=1304862) http://www.rccrawler.com/forum/images/misc/progress.gif

[BJoe]

Here's a pic of my LMRC on some rocks not far from home or work
http://img.photobucket.com/albums/v698/bjoehandley/Losi%20Mini%20Rock%20Crawler/100_0159.jpg

Here's a basement crawling vid too"thumbsup"
WARNING: Elvis Memorabilia Content:lol:
http://img.photobucket.com/albums/v698/bjoehandley/Losi%20Mini%20Rock%20Crawler/th_100_0154.jpg (http://smg.photobucket.com/albums/v698/bjoehandley/Losi%20Mini%20Rock%20Crawler/?action=view&current=100_0154.flv)

BTW, that was easier said than done. I held the camera with my right hand and tried to drive with my left......the wheel is barely far enough left to allow for steering with my thumb:roll:"thumbsup"

[Ecuador Crawler]

http://i419.photobucket.com/albums/pp280/Tongaloca/javier%20crawlers/DSC01622.jpg

http://i419.photobucket.com/albums/pp280/Tongaloca/javier%20crawlers/DSC01619.jpg

http://i419.photobucket.com/albums/pp280/Tongaloca/javier%20crawlers/DSC01621.jpg

http://i419.photobucket.com/albums/pp280/Tongaloca/javier%20crawlers/DSC01605.jpg

http://i419.photobucket.com/albums/pp280/Tongaloca/My%20SWX/DSC07193.jpg

http://i419.photobucket.com/albums/pp280/Tongaloca/My%20SWX/DSC07195.jpg

http://i419.photobucket.com/albums/pp280/Tongaloca/My%20SWX/DSC07196.jpg

[BJoe]

Nice one there Ced!

[saydee1800]

http://i292.photobucket.com/albums/mm10/saydee1800/IMG_0291.jpghttp://i292.photobucket.com/albums/mm10/saydee1800/IMG_0292.jpghttp://i292.photobucket.com/albums/mm10/saydee1800/IMG_0293.jpg

Tekin RS 21.5 3s lipo
Castle Creation BEC
Hitec HS 7955TG (steering)
Hitec HS 7965MG (Dig)
Pro-Line Epics
Pro-Line Chisels

[xirtic]

RC4wd Bully Axles
RC4wd 11 tooth pinions
Kamikaze Zero T Chassis (Black)
Castle Creations Sidewinder ESC (x 2)
Castle Creations BEC
Castle Creations 4mm Gold Motor Plugs
Novak 55T motor (x 2)
Novak 14ga Silicone Wire
Hitec 5955 Servo
Dynamite Aluminum Servo Horn
Montana Scale Design Wheels
Panther Tires
Kreepy Krawler Red Foams
Spektrum DX6 TX (Radio Mixed Dig)
Spektrum AR6000 RX
Custom 5/16" Delrin Straight Upper Links (5" length)
Custom 5/16" Delrin Bent Lower Links (5" lenght)
Custom 1/4" Delrin & Threaded Rod Torsion Links
Custom 5/16" Delrin Drag Links
Custom 5/16" Delrin Body Post Mounts
Custom Aluminum Steering Servo Bracket
Custom Lexan Upper Link ESC Trays Front & Rear
Traxxas Rod Ends
CKRC Baja Bug Body
Parma 3" Body Posts
Pactra Comp Orange Paint backed with Pactra Indy Silver
Associated Chassis Protector for the Axle Bottoms
Firestone Lead Stick-On Wheels Weights (6oz each front & 3oz each rear)
3 Cell Lipo (1500mah 20C Constant to 25C Burst)
Deans Connectors on all power connections

[JAS82]

http://i236.photobucket.com/albums/ff156/scale164/crawlers/DSCN2024.jpg

http://i236.photobucket.com/albums/ff156/scale164/crawlers/DSCN1980.jpg

http://i236.photobucket.com/albums/ff156/scale164/crawlers/022309_003400.jpg

[saydee1800]

here my Axial scx10
Tekin RS 17.5 combo

Maxamps 3s 5000 lipo
Hitec 5965 servo
http://i292.photobucket.com/albums/mm10/saydee1800/IMG_0329.jpg
http://i292.photobucket.com/albums/mm10/saydee1800/IMG_0332.jpghttp://i292.photobucket.com/albums/mm10/saydee1800/IMG_0334.jpg[/IMG[IMG]http://i292.photobucket.com/albums/mm10/saydee1800/IMG_0337.jpghttp://i292.photobucket.com/albums/mm10/saydee1800/IMG_0338.jpg

and my new body

http://i292.photobucket.com/albums/mm10/saydee1800/IMG_0340.jpghttp://i292.photobucket.com/albums/mm10/saydee1800/IMG_0342.jpghttp://i292.photobucket.com/albums/mm10/saydee1800/IMG_0344.jpghttp://i292.photobucket.com/albums/mm10/saydee1800/IMG_0347.jpg

[Ced RC]

http://www.hobbyzip.com/pdata/655.jpg

Berg Axles
Reign Chaos Widemouth Chassis
HPI Shocks (Firestorm)
Kamikaze Bent Links
Epic 45t Motors
Tekin FXR ESC
Castle BEC
HiTec 7955TG
BattleSwitch DIG
DX6 & AR6000
EFlite 3S 1250 Lipo
Vanquish Comp DH Wheels
HB Rovers White Dot
Fubar Lockouts

[Grump]

My first rig. I am new to RC and rock crawling. I made the lower links and the steering links myself. I just painted the body a couple days ago.

[jetboat]

'09 comp rigs

2.2
Bully axles
Stick chassis (all hand made)
Eritex comp heavy beadlocks
Chisels (subject to change)
55t lathe motors
sidewinder esc
jr 8711 steer servo
electronic (switch) dig
traxxas shocks

Super Class
Clod axles
Integy tubes and knuckles
Stick Chassis (all handmade)
noname shocks (soon to be Traxxas BigBores)
RC4wd 40 series aluminum rims
Moab XL
Jr8711 front servo (not installed in pic)
Hs645 MG rear servo
Electronic dig (switch)
55t lathe motors


Both trucks are Sponsored by RCSLOT.COM
Both trucks use a DX6 radio with Jetdesigns return to center mod.

http://i213.photobucket.com/albums/cc305/jshirley78/IMG_2247.jpg
http://i213.photobucket.com/albums/cc305/jshirley78/IMG_2249.jpg
http://i213.photobucket.com/albums/cc305/jshirley78/IMG_2251.jpg

[WarTrader]

Well here is my MRC I have it is heavily upgraded.

--------------------------------------------------------------------------------

Chassis Gatekeeper GC2
Motor MiniTorquemaster, or Mini Slider
ESC Castle Mamba Micro Pro
Tires Flat Irons, Losi Blue Bashers
Wheels Mayhem Engineering 1.9CDP
Center Metal Locker
Losi MRC Lipo, or Thunderpower 1320
Losi MRC threaded body shocks
Axles
Alum C's and Knuckles
Front and Rear Metal Lockers
Rear straight axle kit
Aluminum Hexes
CVD's



http://i494.photobucket.com/albums/rr303/WarTrader/DNA%20MRC/NewGrappler3.jpg

This is my latest addition My brand spanking new SCX10 Still under construction. I have a proline ambush body for it to get put together not to mention a hughe laundry list of little projects for it.

Before
http://i494.photobucket.com/albums/rr303/WarTrader/SCX10/SCX10.jpg

After
http://i494.photobucket.com/albums/rr303/WarTrader/SCX10/downsized_0613091735.jpg

[BJoe]

Got the Comp Crawler painted!
http://img.photobucket.com/albums/v698/bjoehandley/Losi%20Comp%20Crawler/f9c992e3.jpg

Got some updated pics of mine, taken with a real camera instead of my cell phone!
http://img.photobucket.com/albums/v698/bjoehandley/Losi%20Comp%20Crawler/IMG_0026.jpg
http://img.photobucket.com/albums/v698/bjoehandley/Losi%20Comp%20Crawler/IMG_0015.jpg
http://img.photobucket.com/albums/v698/bjoehandley/Losi%20Comp%20Crawler/IMG_0027.jpg
http://img.photobucket.com/albums/v698/bjoehandley/Losi%20Comp%20Crawler/IMG_0028.jpg
http://img.photobucket.com/albums/v698/bjoehandley/Losi%20Comp%20Crawler/IMG_0029.jpg
http://img.photobucket.com/albums/v698/bjoehandley/Losi%20Comp%20Crawler/IMG_0031.jpg
http://img.photobucket.com/albums/v698/bjoehandley/Losi%20Comp%20Crawler/IMG_0030.jpg

[Rock Fink]

Joe put on the rocks , crawling n your car is not a comp. option , I have some new rocks at my course let me know if you can't find any LOL. Looks good."thumbsup"

[BJoe]

Joe put on the rocks , crawling n your car is not a comp. option , I have some new rocks at my course let me know if you can't find any LOL. Looks good."thumbsup"


I'm still having some electronics issues that need working out....once I get a new CVD in it"thumbsup"

[BJoe]

Here's my AX turned SCX10
http://img.photobucket.com/albums/v698/bjoehandley/AX10/ASCX10/95b944cc.jpg
http://img.photobucket.com/albums/v698/bjoehandley/AX10/ASCX10/ee92d20e.jpg
http://img.photobucket.com/albums/v698/bjoehandley/AX10/ASCX10/37038ab2.jpg
http://img.photobucket.com/albums/v698/bjoehandley/AX10/ASCX10/8f607817.jpg

[THE GODFATHER]

this is my new berg crawling in my back yard. i'll post some pics of my ax10's later.

[dblrnut]

finnaly
http://i763.photobucket.com/albums/xx279/dblrnut/bw3.jpg
http://i763.photobucket.com/albums/xx279/dblrnut/bw2.jpg
http://i763.photobucket.com/albums/xx279/dblrnut/blackwidow1.jpg

[Roketcooper]

Here's my Escalade Scaler:

http://i37.photobucket.com/albums/e100/Roketmini/Crawlers/P1040185.jpg
Box-Stock SCX-10
Jr 126MG Servo
Mabuchi Silver Can Motor
Pegasus Wire Wheels
HPI Escalade Body
RC4WD Mud Thrashers

[BJoe]

Nice, I'm digging the wires! Where in DuPage are you at?

[rod-211]

1.9 scale crawler
axial scx10 with hummer h2 body
http://i208.photobucket.com/albums/bb191/3320108/SSPX0249.jpg
http://i208.photobucket.com/albums/bb191/3320108/SSPX0255.jpg

[scouperacer]

Picked this litlle guy up about a week or two ago.

Pretty much stock.

http://i52.photobucket.com/albums/g34/scouperacer1994/RC%20Crawler/Crawler1001.jpg


http://i52.photobucket.com/albums/g34/scouperacer1994/RC%20Crawler/Crawler1002.jpg

http://i52.photobucket.com/albums/g34/scouperacer1994/RC%20Crawler/Crawler1003.jpg