Mayhem 2.2 Competition Double Phatty

[Mayhem Eng.]

New wheel design from Mayhem Engineering
Mayhem 2.2 Competition Double Phatty
ME-1004-Comp-DP

$130.00 shipped within the U.S.A. Patent Pending

Pre-orders being accepted now

56641

56642

56643

56644

The benefits of this design:

Need only remove outside locking ring to adjust weight
No need to remove the tire, saving time
Adjust weight by adding or subtracting 9/16" ball bearings
Just about any type of wheel weights (other than bearings) can be used
Ball bearings will always stay at the bottom of the wheel to keep center of gravity at its lowest point
Largest ball bearing 9/16" or smaller can be used
The key to this design using any type of ball bearings is to KEEP them below center line of the wheel; if above center line it will not work as intended. If you are above center line the bearings have a tendency to flop over the top and lose the benefit of keeping the center of gravity at its lowest point
This design doesn't add a lot of weight, but what weight is there keeps the center of gravity at its most useful point (low in the wheel)
If you find yourself highcentered, we found that if enough wheel speed can be generated you create an out of balanced condition, which could help remove you from being high centered
Each wheel weight 10.3 oz complete with 4 bearings
A set includes:

Four (4) Mayhem 2.2 Competition Double Phatty Rims in Machine Finish
Four (4) Traditional rings - your choice of color (red, blue, gold, black or machine finish)
Four (4) Competition 16 Rings - your choice of color (red, blue, gold, black or machine finish)
Sixteen (16) 9/16" dia steel ball bearings
128 stainless steel button head screws
Plus engraving (within reason) on any anodized color (machine finish would be hard to see).
Shipping included within the USA (outside of USA contact us for quote)ready for shipping the 1st week in March. Pre-orders being accepted now. Lifetime replacement warranty, excluding anodize and hardward.

We will have more mid March - so place your order

[NIK]

pm sent

[Mayhem Eng.]

Got it - Thanks Sir

pm sent

[Rckcrwlr]

That is a sweet idea...

Innovation...cool.

[666]

CLEVER!!!!"thumbsup"

[nj05nismo]

brilliant...

[JeremyH]

Nice work Mayhem! Very interesting idea...

[RaceChat]

pm sent

[Mayhem Eng.]

Got it.....






pm sent

[Mayhem Eng.]

Thanks everyone

[HC Rc Guy]

pretty slick trick bub.

[NIK]

set 3 is mine :flipoff:


thanks mayhem

[rcr3fan29]

I may have missed it, but how wide is the wheel? thanks

[Mayhem Eng.]

With rings mounted 1.535 (38.9mm) without rings it's 1.295 (32.8mm)



I may have missed it, but how wide is the wheel? thanks

[rcr3fan29]

With rings mounted 1.535 (38.9mm) without rings it's 1.295 (32.8mm)

Uhhh, can't you be more precise than that? :) Thanks. PM is on it's way. "thumbsup"

[Mayhem Eng.]

Ya 1.5352 lol Thanks



Uhhh, can't you be more precise than that? :) Thanks. PM is on it's way. "thumbsup"

[Mayhem Eng.]

Don't for get about the engraving for those of you that have placed orders. Thanks Mayhem Eng.

[GeneralG]

NOw that's a great idea! Nice work!

[braceysdad]

Very cool idea...

I'd love to see a video of one on a rig with a clear ring!

[dezrik]

These are badass, i really need to fix my paypal :o

[Mayhem Eng.]

I thought about that. Trying to find the time to make a clear ring? I could use a Mayhem 5 point ring. Let me see what I can do. I have a PO I need to get out by Friday so it will be next week or so? Thanks Mayhem Eng.




Very cool idea...

I'd love to see a video of one on a rig with a clear ring!

[FrankyRizzo]

Very cool idea...

I'd love to see a video of one on a rig with a clear ring!

X2!!!

Holy crap that is cool!!! Sweet idea.

[FrankyRizzo]

I thought about that. Trying to find the time to make a clear ring? I could use a Mayhem 5 point ring. Let me see what I can do. I have a PO I need to get out by Friday so it will be next week or so? Thanks Mayhem Eng.

What about Plexiglass??

*edit* Sorry spell check did that.

[Mayhem Eng.]

I have the material "plexiglass" not the time.....


What about Plexiglases??

[bcrofts]

Nice I Like It

[DirkDigler]

I love the idea and the wheels look great!
Nice Job.

I have a question:
How tightly "packed" are the bearings?
I can see that if dirt gets into the race area, the bearings wouldn't roll and could remain stationary if they were in there too tight.

[DISTURBIN' tha PEACE]

PM coming to ya.

[braceysdad]

I love the idea and the wheels look great!
Nice Job.

I have a question:
How tightly "packed" are the bearings?
I can see that if dirt gets into the race area, the bearings wouldn't roll and could remain stationary if they were in there too tight.

x2...

That is what i was wanting to see in the video.

How easily your balls roll...

[braceysdad]

I thought about that. Trying to find the time to make a clear ring? I could use a Mayhem 5 point ring. Let me see what I can do. I have a PO I need to get out by Friday so it will be next week or so? Thanks Mayhem Eng.

X2!!!

Holy crap that is cool!!! Sweet idea.

What about Plexiglass??

*edit* Sorry spell check did that.

I have the material "plexiglass" not the time.....


Send a "sample" set to Rizzo to do full review...

You will not regret it

[Mayhem Eng.]

Thanks! Your right that could happen. The bearings are 9/16 .562 dia. the depth of the bearing area is .590 so you have about .03 worth of play. We might redesign the ring to completly inclose the bearings, But it would not be a water tight seal. I'm sure I will get good feed back. We only have two working sets we used for testing and had no problems, We did not test in mud. Thanks Mayhem Eng.


I love the idea and the wheels look great!
Nice Job.

I have a question:
How tightly "packed" are the bearings?
I can see that if dirt gets into the race area, the bearings wouldn't roll and could remain stationary if they were in there too tight.

[Mayhem Eng.]

frankyrizzo, they are on there way....



Send a "sample" set to Rizzo to do full review...

You will not regret it

[xzotic-1]

pm sent on a set"thumbsup"

[DirkDigler]

Thanks! Your right that could happen. The bearings are 9/16 .562 dia. the depth of the bearing area is .590 so you have about .03 worth of play. We might redesign the ring to completly inclose the bearings, But it would not be a water tight seal. I'm sure I will get good feed back. We only have two working sets we used for testing and had no problems, We did not test in mud. Thanks Mayhem Eng.


thanks for that response. Awesome wheels!

[Mayhem Eng.]

Thank you Sir....


thanks for that response. Awesome wheels!

[braceysdad]

frankyrizzo, they are on there way....


The real test would be to send them to Dirk and see if they would survive!

[GeneralG]

x2...

How easily your balls roll...

:roll: LOL!!! :lol:

[rcr3fan29]

Payment sent. "thumbsup"

[Mayhem Eng.]

Thank you.....

Payment sent. "thumbsup"

[FrankyRizzo]

I don't run in water or mud with my comp rig and I would have to feel that these would be just for a comp rig.

BTW what is the width??

Please tell me they are a little narrow.....

[Mayhem Eng.]

With rings mounted 1.535 (38.9mm) without rings it's 1.295 (32.8mm) same as all our wheels.




I don't run in water or mud with my comp rig and I would have to feel that these would be just for a comp rig.

BTW what is the width??

Please tell me they are a little narrow.....

[FrankyRizzo]

With rings mounted 1.535 (38.9mm) without rings it's 1.295 (32.8mm) same as all our wheels.

Frickin sweet!!!

[xzotic-1]

Payment Sent .cant Wait.............

[Mayhem Eng.]

Thank you sir....


Payment Sent .cant Wait.............

[STANG KILLA SS]

Very cool idea...

I'd love to see a video of one on a rig with a clear ring!

amen, lexan or plexi rings would be sweet:shock:
you could even do anodized balls"thumbsup"

[Rckcrwlr]

you could even do anodized balls"thumbsup"

Get married and that's what you get... :lol:

[Mayhem Eng.]

That didn't take long.....LOL:lol::lol:


You could use some bearing blast to clean your balls if they get gritty...

Nothing worse than gritty balls that bind

[Hawk Mortimer]

Are they gone?

If not I'll take a set .

Hawk

[Mayhem Eng.]

It's all good.....Thanks everyone....


I held off as long as I could, sorry

[Mayhem Eng.]

I always have a set for you Hawk....Thanks


Are they gone?

If not I'll take a set .

Hawk

[Hawk Mortimer]

I always have a set for you Hawk....Thanks


Thanks Mr. Mayhem, I like this idea.
I don't play in the mud, so that won't be a problem here.

Hawk

[Racer4Life]

Send a "sample" set to Rizzo to do full review...

You will not regret it

The real test would be to send them to Dirk and see if they would survive!

Man is BD pimping out Rizzo and Digler?:lol::roll:

Nice idea Mayhem. Great alternative for the stick weights and BB's."thumbsup"

[nigels_world]

Can they be made in your other offset?

[braceysdad]

Man is BD pimping out Rizzo and Digler?:lol::roll:

Nice idea Mayhem. Great alternative for the stick weights and BB's."thumbsup"

I owe them both money...

[Mayhem Eng.]

I will have to do the math. But most likely. long pause letting the calculator warm up, ya we can.


Can they be made in your other offset?

[Rckcrwlr]

I will have to do the math. But most likely. long pause letting the calculator warm up, ya we can.

Even with the bearings??? It looks like they are pretty tight in there now...

[iwanttocrawl]

are they gone?

[Mayhem Eng.]

We just got in 5 12' footers today we have plenty. Place your order.


are they gone?

[Mayhem Eng.]

There is just enough room.



Even with the bearings??? It looks like they are pretty tight in there now...

[shrek]

guess i bought my rims too soon,:x i really like those good job mayhem."thumbsup"

[Mayhem Eng.]

I can put you on the list. These will be ready mid march?


guess i bought my rims too soon,:x i really like those good job mayhem."thumbsup"

[Rathgar]

damn it.already bought two sets and you got me wanting another.im going too have too be really nice too the wife this month.soo i can get another set looks good.

[Mayhem Eng.]

I'm puttin you on the list, now make sure you are real nice to her....lol



damn it.already bought two sets and you got me wanting another.im going too have too be really nice too the wife this month.soo i can get another set looks good.

[THnCS]

damn it.already bought two sets and you got me wanting another.im going too have too be really nice too the wife this month.soo i can get another set looks good.


Better get me a set too, or I'm going to TELL!!! :lol: Dammit Mayhem, once I had my mind made up on my order, you pull this. Back to the drawing board!!!:x Nice work!"thumbsup"

[Mayhem Eng.]

OK, you got it. Thanks Mayhem Eng.


Better get me a set too, or I'm going to TELL!!! :lol: Dammit Mayhem, once I had my mind made up on my order, you pull this. Back to the drawing board!!!:x Nice work!"thumbsup"

[sloppy]

add me to that mid march list I will buy another set of your wheels I am real happy with the 1.9's

edit: a double phatty 1.9 rim would be sweet with a similar design. my comp comp 1.9 buggy would like it.

[Mayhem Eng.]

You got it, Do you have a crystal ball.....Thanks Mayhem Eng.



add me to that mid march list I will buy another set of your wheels I am real happy with the 1.9's

edit: a double phatty 1.9 rim would be sweet with a similar design. my comp comp 1.9 buggy would like it.

[sloppy]

sweet:)

[Mayhem Eng.]

We will be starting on the 2.2 Competition Double Phatty next week. Pre-orders are still being accepted.

Be sure to include engraving requests at the time you place your order, if you want engraving. Be sure to specify ring color.

Thanks,

Mayhem Engineering

[FrankyRizzo]

Got mine today holy crap what awesome fit and finish.

Just a heads up to the CVD users you will have enlarge the holes for the fronts and the Axial guys will have to run standard hexes.

I will have some pics in the AM.

If you don't have a set of Mayhem's wheels you are missing out!! I have not felt or seen a smoother machined beadlock.

[666]

Yep, good stuff they are!!

Thanks Mayhem!"thumbsup"

[Mayhem Eng.]

Thank You!!!!"thumbsup"

[StIcK kInG]

Got mine today holy crap what awesome fit and finish.
If you don't have a set of Mayhem's wheels you are missing out!! I have not felt or seen a smoother machined beadlock.
I agree with Franky Rizzo If you dont have a set by now,You seriously are missing out BIG! Mayhems are the sweetest bead locks on the market."thumbsup"I ordered engraved rings & got em' in the mail friday. I must say I am very happy with them as well as my 2.2 comps & double fattys!:lol: 1.9's are next on the list. Keep up the kick @ss work Mayhem!

[braceysdad]

Got mine today holy crap what awesome fit and finish.

Just a heads up to the CVD users you will have enlarge the holes for the fronts and the Axial guys will have to run standard hexes.

I will have some pics in the AM.

If you don't have a set of Mayhem's wheels you are missing out!! I have not felt or seen a smoother machined beadlock.

Are you gonna have a lexan ring made and shoot a video?

[run2jeepn]

Are you gonna have a lexan ring made and shoot a video?

x2.....:twisted:

[Rckcrwlr]

I agree with Franky Rizzo If you dont have a set by now,You seriously are missing out BIG! Mayhems are the sweetest bead locks on the market."thumbsup"I ordered engraved rings & got em' in the mail friday. I must say I am very happy with them as well as my 2.2 comps & double fattys!:lol: 1.9's are next on the list. Keep up the kick @ss work Mayhem!


Pics of the engraving????

[FrankyRizzo]

I did find out the smaller inner ring used on the outside holds the balls in just fine so you can see the balls go roundy round.

[braceysdad]

I did find out the smaller inner ring used on the outside holds the balls in just fine so you can see the balls go roundy round.

video

[Mayhem Eng.]

Still taking pre-orders, We will be starting on them thursday morning...Thanks Mayhem Eng.

[StIcK kInG]

Sorry for the delay Prez.:lol: Here is a pic or two of the engraving you asked 4. They look sweet in the pics but are even better in person. "thumbsup"

[Mayhem Eng.]

Did you add a point in between the (p) and the (a) I thought I sent you this w.pa.c. Just curious looks good. I have some stuff headed your way.

[StIcK kInG]

Yea I did that. You had it right without the dot in Pa. W.Pa.C. It just looked odd to me without the dot so I added one. I knew I would get some heat from my W.Pa.C. guys, just not that fast....lol "thumbsup"

[rcr3fan29]

Still taking pre-orders, We will be starting on them thursday morning...Thanks Mayhem Eng.

Production or shipping? :)

[Mayhem Eng.]

Production sorry about that..


Production or shipping? :)

[TBQ]

Can you anodize the wheels if so how much $$$...:) THANKS

[Mayhem Eng.]

$120.00 pick your color red, blue, black, gold, machine finish They will be ready to ship mid march. and don't forget about engraving.


Can you anodize the wheels if so how much $$$...:) THANKS

[Mayhem Eng.]

Don't forget about the drawing on the first.......If you bought a set of wheels you are entered and if you post a pic by tomorrow midnight you are entered again. Prize is your choice of a set of Mayhem Eng. Beadlocks. We want action pics!!!!!

Last months winner was "rckcrwlr" Thanks to everyone....

If you bought wheels and have not gotten them your entered in this months drawing. When you get your wheels and send in a pic you will be entered again next month.

Thanks Mayhem Eng.

[ctrwannabe]

wow i may have to pick up a set of these when i get payed

[Daffi]

pm sent

[Mayhem Eng.]

got it, Thanks

pm sent

[xzotic-1]

r this new rims being shipped yet.cant what to get mine....

[Mayhem Eng.]

Not yet...Soon



r this new rims being shipped yet.cant what to get mine....

[FrankyRizzo]

Took these this weekend. Just an FYI I mounted up tires with just 4 screws per side and I could not pull the beads out. Like I said before the fit and finish are some of the best I have seen. On to the pics. The sound of the balls rolling around is kind of cool as well. If you are looking for the beefiest than these are for you.

[extreme]

did you notice a diffrence in performance at all? and how about the out of round effect from the balls when you get hung up?

reports please!!!

[FrankyRizzo]

did you notice a diffrence in performance at all? and how about the out of round effect from the balls when you get hung up?

reports please!!!

The overall weight of these are really cool. They are very solid. The balls don't have much room to bounce around so they don't feel sloppy at all. They seemed to be very stable at wheel speed and gave some nice advantage over standard fixed weight.

[extreme]

but did you notice when you got hung up on a ledge that it was easyer to get off compaired to standard weighted wheels

thats what im really digen about these wheels besides for wieght placement, did you notice an improvment in stablity?

[FrankyRizzo]

thats what im really digen about these wheels besides for wieght placement, did you notice an improvment in stablity?

The overall weight provides a lot of stability.

[StIcK kInG]

I agree with Franky Rizzo, they are real stable and they do make a cool noise when I run my rig. I run a R2D with a black revolver and a 14T pinion. When I use dig it works just as smooth as with weighted or heavy wheels. No slop at all with the ball bearings. They don't bounce around or flip over the top of the center of the rim. They stay low just as planned. Mayhem did they're homework with these. Great job guys!"thumbsup"

[wrightcs77]

Hey FR, is that a full length lexan skid I see? Interesting idea. How do you like it? Sorry, didn't mean to hijack the thread. The wheels look awesome and the bearings are a great idea.

[FrankyRizzo]

It is a sheet of spring steel. It was an idea a friend had. I think it sucks.

[extreme]

if i order a set this week would i be able to get them by march 30th?

[Mayhem Eng.]

Yes, We are running 24 sets right now, They will be off the machines on wednesday, then up with the rings and off to the plater and back onto the machines for engraving and I hope to ship next Wednsday..So if you want a set letme know. Thanks Mayhem Eng.


if i order a set this week would i be able to get them by march 30th?

[extreme]

sweet ill let yea know

[rcr3fan29]

Yes, We are running 24 sets right now, They will be off the machines on wednesday, then up with the rings and off to the plater and back onto the machines for engraving and I hope to ship next Wednsday..So if you want a set letme know. Thanks Mayhem Eng.

Soooo ... if a person skipped the engraving will they get theirs sooner? ;-)

[Mayhem Eng.]

You might save a day? I have enough rings to ship 3 sets of wheels tomorrow....But this is what you would get. 4 wheels machine finish, 4 comp. rings in black ano. no engraving and 4 traditional rings for the back side machine finish. and 16 bearings. I just ordered 500 9/16 dia bearings those should be here Monday, wheels and rings will go to the plater on monday he will have them for at least 2 days back on the machine Thursday for engraving. so we can ship on Friday next week. Let me know if that works for you. Thanks Mayhem Eng.



Soooo ... if a person skipped the engraving will they get theirs sooner? ;-)

[Mayhem Eng.]

Just to let you guys know we will be shipping all orders on the 2.2 comp. wheels next Friday 3/14/08

Thanks Mayhem Eng.

[Mayhem Eng.]

Headed to the plater..........

58439

[JeremyH]

Bling!

[TEDROCKZ]

Just sent some green your way, Thanks and looking foward to them cool azz wheels

[Mayhem Eng.]

Got it, And thanks.




Just sent some green your way, Thanks and looking foward to them cool azz wheels

[Stormin2u]

Hey Guys, PayPal sent thanks "thumbsup"

[Mayhem Eng.]

Got it - Thanks

Hey Guys, PayPal sent thanks "thumbsup"

[Mayhem Eng.]

We have 7 sets left of this batch out of alum. We have 4 sets in black delrin same price $120.00 shipped in the USA.

Thanks Mayhem Eng.

[tru]

paypal sent as well

[73mule]

PM sent.

[Mayhem Eng.]

Got it....Thanks Mayhem Eng.


paypal sent as well

[Mayhem Eng.]

Back at ya.....Thanks


PM sent.

[73mule]

PP sent. These are going to be hot!!
Thanks

[Mayhem Eng.]

Got it and thank you....


PP sent. These are going to be hot!!
Thanks

[Mayhem Eng.]

The 4 sets of delrin are gone. Thanks Mayhem Eng.

[NIK]

Headed to the plater..........

58439


i can see mine 2nd in from the left:-P

[Mayhem Eng.]

Sorry nik that set is sold yours are on the right......lol

i can see mine 2nd in from the left:-P

[Mayhem Eng.]

Ok guys we have 3 sets left.......And thanks for everyone who bought a set. We also redesigned the center of the ring to help keep debris from getting in side where the bearings ride. I will post up a pic tomorrow. Thanks Mayhem Eng.

[ctrwannabe]

i would love a set but i have to pay off a ticket next week:roll::lol: anyways how long will these be avalable?

[Mayhem Eng.]

We have 2 sets left......Let me know. Thanks Mayhem Eng.

i would love a set but i have to pay off a ticket next week:roll::lol: anyways how long will these be avalable?

[ctrwannabe]

i mean in the future will they be avalable or are you working on a v2 or anything? thanks

[DISTURBIN' tha PEACE]

Ok guys we have 3 sets left.......And thanks for everyone who bought a set. We also redesigned the center of the ring to help keep debris from getting in side where the bearings ride. I will post up a pic tomorrow. Thanks Mayhem Eng.
Are the new rings comming with these pre-ordered rims?

[Mayhem Eng.]

Yes, all orders will have the new rings. I hoping the plater calls today so we can ship tomorrow. I will keep you guys posted. Thanks Mayhem Eng.


Are the new rings comming with these pre-ordered rims?

[lime]

once these two sets are gone is that it?

if so I'll take one set.

[Mayhem Eng.]

No, We will be making more. We are in the process of cycling the different wheels thru production. It could be a month before we get back to making this wheel again. Do you still want a set? Let me know. Thanks Mayhem Eng.




once these two sets are gone is that it?

if so I'll take one set.

[fantomas]

I'll take a set.. PM sent

[Mayhem Eng.]

fantomas, I got your pm and I think I have a set for you.....BUT let me make sure I do. Hold on to your money until I'm 100% sure. I hope to know today or it could be tomorrow I need to get a count of everything. Last check I had 2 sets left and need to make sure. Thanks Mayhem Eng.



I'll take a set.. PM sent

[TEDROCKZ]

Yes, all orders will have the new rings. I hoping the plater calls today so we can ship tomorrow. I will keep you guys posted. Thanks Mayhem Eng.

Any word, I'm like a 5 year old waiting on Sanny Claus:wink:

[Mayhem Eng.]

I didn't here from the plater......I will call him tomorrow and see where he is at with them. I will let you guys know.

[fantomas]

fantomas, I got your pm and I think I have a set for you.....BUT let me make sure I do. Hold on to your money until I'm 100% sure. I hope to know today or it could be tomorrow I need to get a count of everything. Last check I had 2 sets left and need to make sure. Thanks Mayhem Eng.

No problem... just let me know "thumbsup"

[rebman]

Hey, I paid for mine sunday.. You told me you would priority ship to me on monday, well it's going on friday..

No wheels, what's up?

[Mayhem Eng.]

We just got all the componets together today.


Hey, I paid for mine sunday.. You told me you would priority ship to me on monday, well it's going on friday..

No wheels, what's up?

[fantomas]

Mayhem your pm box is full, but yes I will take that set

[Mayhem Eng.]

It's been cleaned out.


quote=fantomas;1096906]Mayhem your pm box is full, but yes I will take that set[/quote]

[Mayhem Eng.]

Just want to thank everyone know, we sold everything we had in stk. on the 2.2 comp. wheels....Thanks...I'm waiting on a call from the plater as soon as I here from him I will let you guys know....We will be making more in about 2 weeks or so...Thanks Mayhem Eng.

[Brandon]

Cant wait to get my hands on a set. These will be one of the most popular wheels this year "thumbsup"

[Mayhem Eng.]

That would be so cool......Thanks

[Mayhem Eng.]

I see you rebman....They will ship today.....

[PipeDreams]

DO lots of comp guy run these? I have seen alot of guys that prefer the dead weight vs the live weight.... But i was thinking because they don't have any where to move but around if it would still give that feeling of live weight? any thoughts?

[Brandon]

We wont know until they are readily available ;-) There are only a few sets out there right now.

[Mayhem Eng.]

Just got the call from the plater that the wheels and rings are done. I will do everything I can to get these out to all of you guys as soon as I can. Thanks Mayhem Eng.

[TEDROCKZ]

^^^^^^ This is good to hear, Glad you changed the outer rings. I hear nothing but good reviews. Keep up the great work

THanks, Steve

[Mayhem Eng.]

Hey guys, I wasn't able to ship Friday or today (saturday) because I didn't have enough m3 screws on hand, I had about 1000 pcs and needed 3000 pcs. in order to ship everybody. I will have enough on Monday and everybodys wheels will ship on Monday with a tracking # Sorry about this I thought I had it all covered.....Thanks Mayhem Eng.:-(


I will post up a group pic later today so you can see what your wheels at least look like.

[Stormin2u]

Thanks for the update I actually like anticipation "thumbsup":lol:

[NIK]

cool my black jack cant with for its new rims:lol:

[Mayhem Eng.]

Thanks For hanging in there nik.


cool my black jack cant with for its new rims:lol:

[Mayhem Eng.]

59106

59104

59105

[DISTURBIN' tha PEACE]

Hell Yeah!!!!!

[666]

Anyone have any good idea's what I should have engraved on my set?

[Mayhem Eng.]

Mayhem Eng. of course.....


Anyone have any good idea's what I should have engraved on my set?

[EeePee]

Anyone have any good idea's what I should have engraved on my set?

A number 6 on every third.

[fantomas]

Wow those look great... "thumbsup"

I cant wait to get my set!

[TEDROCKZ]

Front row, 2nd from left, Looks better than i ever imagined. Mayhem you are truly the MAN:twisted:

[rcr3fan29]

Hope that's not the whole group. :-( Mine were supposed to be machine finish wheels, black rings and no engraving. :?:

[Mayhem Eng.]

Welllllllll, We had to open your package and we made a mistake and engraved "Mayhem Eng" on them......I will ship out your order with the rings engraved and make you some new ones at no charge. You can keep the engraved rings. It will take me a couple of weeks to get you your rings because I have to go to the plater. Sorry about that......Mayhem Eng.


Hope that's not the whole group. :-( Mine were supposed to be machine finish wheels, black rings and no engraving. :?:

[tru]

at first glance all i seen was screws!!! omgwtfbbq!!!!

[rcr3fan29]

Welllllllll, We had to open your package and we made a mistake and engraved "Mayhem Eng" on them......I will ship out your order with the rings engraved and make you some new ones at no charge. You can keep the engraved rings. It will take me a couple of weeks to get you your rings because I have to go to the plater. Sorry about that......Mayhem Eng.

It's all good. "thumbsup" I look forward to receiving your wheels.

[Hawk Mortimer]

I see mine, top row all alone.

Thanks Mayhem,
Hawk

[suiza]

Looks very good .Thanks Mayhem

['04 Rubicon]

Sweet. Those VARCOR wheels look oh so nice!

[Mayhem Eng.]

I just got back from getting 2000 m3 screws. We are in the process of taping and boxing everything up. And off to the post office. Thanks Everyone. Mayhem Eng."thumbsup"

[FrankyRizzo]

I just got back from getting 2000 m3 screws.

So you have enough for 2 sets of wheels then??

J/K :)

[Mayhem Eng.]

I think we have juuusssttt enough for 2 sets.......LOL"thumbsup"

[FrankyRizzo]

I think we have juuusssttt enough for 2 sets.......LOL"thumbsup"

:lol: :lol: "thumbsup"

[eric113]

Question the engraving, Can yall do smilies ? Like the flipoff dude :flipoff:???

[Mayhem Eng.]

Ya....We could do it.....Mayhem Eng.


Question the engraving, Can yall do smilies ? Like the flipoff dude :flipoff:???

[hlb3]

I see mine!!!! I can't wait to get them!!!

[Nerve]

Wow .. after seeing all the phattys in the photo..

Is there still some phatty stock out there?

[Mayhem Eng.]

In about 2-3 weeks there will be. Let me know....Thanks Mayhem Eng.

Wow .. after seeing all the phattys in the photo..

Is there still some phatty stock out there?

[Nerve]

In about 2-3 weeks there will be. Let me know....Thanks Mayhem Eng.

Alrighty. Could you put my name down on the list for a set of the next batch. Then I will PM all the details and such.

thanks

[Mayhem Eng.]

You got it.....Thanks Mayhem Eng.

[Mayhem Eng.]

All orders shipped yesterday.....except for rpmj yours will go out Friday. We will be starting the next batch of comp. phattys soon. Thanks Everyone...Thanks Mayhem Eng.

[DISTURBIN' tha PEACE]

Sweet, can't wait.

[TEDROCKZ]

Mayhem, Since you are in the wheel and machining business could you maybe pruduce a line of axle hexes to fit your wheel being we have to remove part of the factory supplied ones(Axial) . I definitly we be ordering more wheels from you in the future and it would be convenient to get the wheel and hexes all in one spot ( Not fussing or anything, I just know you are the man that can make it happen:idea:"thumbsup").

P.s. My wheels should be here tommorow, thanks again for the great products and service.

Steve

[Stormin2u]

Hey fellas those look MARVELOUS "thumbsup"

[quote=666;1098920]Anyone have any good idea's what I should have engraved on my set?[/quote

Hey Patrick how about "Rock Devil" 8)

[Mayhem Eng.]

We are in the process of doing just that....I hope to have something next month..Thanks Mayhem Eng.



Mayhem, Since you are in the wheel and machining business could you maybe pruduce a line of axle hexes to fit your wheel being we have to remove part of the factory supplied ones(Axial) . I definitly we be ordering more wheels from you in the future and it would be convenient to get the wheel and hexes all in one spot ( Not fussing or anything, I just know you are the man that can make it happen:idea:"thumbsup").

P.s. My wheels should be here tommorow, thanks again for the great products and service.

Steve

[Nerve]

Mayhem, Since you are in the wheel and machining business could you maybe pruduce a line of axle hexes to fit your wheel being we have to remove part of the factory supplied ones(Axial) .


Hmmm, what about for WK axles with the Hot Racing clamp on hexes?..

http://www.tcscrawlers.com/Hot-Racing-Aluminum-12mm-Clamp-On-Wheel-Hex-for-Wheely-King-WK1008-p-16436.html

[eric113]

Hmmm, what about for WK axles with the Hot Racing clamp on hexes?..

http://www.tcscrawlers.com/Hot-Racing-Aluminum-12mm-Clamp-On-Wheel-Hex-for-Wheely-King-WK1008-p-16436.html

Ted is talking about making a flat face hex. Those hr still have that raised surface. What be sweet if a company would come out with a flat face clamp on hex.

[Nerve]

Ted is talking about making a flat face hex. Those hr still have that raised surface. What be sweet if a company would come out with a flat face clamp on hex.

Sorry, I should have clarified a bit in what I posted.

What I meant was, I currently have those HR screw hexes installed on my crawler and they fit fine w/ the plastic Axial beadlocks. So I would imagine that I would have to either cut them down (which I dont want to do) or buy some stock axial hexes and shave them down to fit the wheels properly. Then again, if Mayhem is in the process of making flat face hexes to fit their wheels.... I will just wait and order those at the same time. Then I keep the HR hexes for if I want to run the axials.

[TEDROCKZ]

Mayhem, got these badboys in today and got them installed. IMHO the new standard for wheels.
They are neatly packed
59778
They hold beads tightly
59776
Weigh in @ 13oz w/Rock Claws
59777

[fantomas]

Look great tedrockz.. Are you running them air tight, or with a breather hole?

Im trying to think of a good place to put a breather hole.. Maybe a screw hole breather like the guys with MSD's did or a hole where the bearings ride.. not sure if the hole would affect the rolling of the bearings..... probably not with a small enough hole

Hey mayhem what do you think?

[TEDROCKZ]

Im trying to think of a good place to put a breather hole..[/quote]

No hole yet, looking for that good place too. I saw on a post elsewhere that somebody used a screw hole and lined up a air hole with it. That way you can put the screw back in and run vented or unvented. Searching for that post now.

[fantomas]

Here it is.... screw hole breather (http://www.rccrawler.com/forum/showthread.php?t=99957&highlight=msd+screw+hole)

[TEDROCKZ]

Here it is.... screw hole breather (http://www.rccrawler.com/forum/showthread.php?t=99957&highlight=msd+screw+hole)
thats it, thanks

[Mayhem Eng.]

Dude That Thing looks freaking sweeeet....We need some action pics when you get a chance...Thanks Mayhem Eng."thumbsup"


Having an air hole in the bearing area will not hurt how the bearings work, just keep it as small as you can.

[Brandon]

A small hole in the bearing area will not hurt anything, try to keep the hole as small as you can.

Thanks Mayhem Eng.

Also keeping the hole offset from the location where the outer diameter of the bearings roll will eliminate any problems.

[Stormin2u]

I got a nicely packaged set of CDPs (Completion Double Phatties) today.:shock: You can see Ted's below and I must say these bad boys are substantial to say the least. :lol: You will defiantly be anchored to the mountain when you wear these no question. High quality work from the fellas at Mayhem. :) I haven't mounted any yet that will happen this weekend but I'm looking forward to it.

Nice Job Mayhem Engineering "thumbsup"



Mayhem, got these badboys in today and got them installed. IMHO the new standard for wheels.
They are neatly packed
59778
They hold beads tightly
59776
Weigh in @ 13oz w/Rock Claws
59777

[73mule]

Onced opened I found the best packageing of any thing I have bought from any where. "thumbsup" I only mounted one for today, have to give my arm a rest with all them screws. Fit and finish is best I have seen. With claws and ace's my Delrin wheels came in at 12.3 oz. I am standing by for the next batch to come off the MIL. Mayhem you did a top notch job on these wheels and I hope to make the list for the next run. I will post a pic this weekend once mounted and in action. Thanks Mayhem for your time and hard work for a great product and support."thumbsup"

[Ricarte]

Here is a pic of the breather holes in my Mayhem wheels...

http://i271.photobucket.com/albums/jj129/RicarteM/airhole.jpg
http://i271.photobucket.com/albums/jj129/RicarteM/airhole1.jpg

Im trying to think of a good place to put a breather hole..

No hole yet, looking for that good place too. I saw on a post elsewhere that somebody used a screw hole and lined up a air hole with it. That way you can put the screw back in and run vented or unvented. Searching for that post now.[/quote]

[hlb3]

I got mine today, these things are an absolute work of art!!!! I just go them mounted up, I had to take down the stock Axial hexs, it widened the wheelbase a little, which will be nice I think. Going to start with 4 bearings in the fronta and 2 in the rears. For my breathers, I had them go into the corner of the ball bearing chamber, so they are out of the way of the bearings and they should stay relatively clean with the outer ring protecting it. Some pics:

http://i19.photobucket.com/albums/b178/lburris/AX-10/P1050233.jpg

http://i19.photobucket.com/albums/b178/lburris/AX-10/P1050241.jpg

http://i19.photobucket.com/albums/b178/lburris/AX-10/P1050244.jpg

http://i19.photobucket.com/albums/b178/lburris/AX-10/P1050245.jpg

[Mayhem Eng.]

Nice....That thing looks like it will rock....please send some action pics when you get a chance....."thumbsup"

Mayhem Eng.:)

What does warcrc stand for?

[hlb3]

Thanks! I will be doing some crawling on Friday night, I will get some pics up after that. "thumbsup"

WARCRC is Washington Remote Control Rock Crawlers

[DISTURBIN' tha PEACE]

Damn, nothing for me today. Sucks living in Hawaii.

[Mayhem Eng.]

It's coming......I loved it living over there...The kind, weather, surf. That was a long time ago...."thumbsup"


Damn, nothing for me today. Sucks living in Hawaii.

[Rocksmith Eng.]

Any plans on 40 series in this style?
I would take a set now engraved with Rocksmith of course.......

[Mayhem Eng.]

It's something I've thought about. I don't think it would be cheap. I was looking at some axial 40 series and I think they were about $240.00 $280.00 something like that, I'm not sure I could do them for that price.


Any plans on 40 series in this style?
I would take a set now engraved with Rocksmith of course.......

[Rocksmith Eng.]

259 for a competitors aluminum beadlocks.
Im sure you would sell a few of these if you made em for a 40 series. Just thought I would ask......

[DARKHORSE]

Mayhem, PM sent"thumbsup"

[TK-twister]

very cool idea. My only though is your are decending a steep rock and make a quick stock or slight drop the free rolling balls could disturb the balance of the truck by sloshing around

[Mayhem Eng.]

Ya your right that could happen, It's one of those things you have to get use to what you have and make a justments for. Mayhem Eng.

I was thinking more about what you said, with fixed weights in that same situation you would have that weight high in the wheel and a sudden stop or turn could cause problems as well. I think keeping the weight low in the wheel will help improve that situation. The balls are going to be at the same angle as the hill for the most part. The question is how far will the balls move if you stoped real quick. A lot of things come into play.


very cool idea. My only though is your are decending a steep rock and make a quick stock or slight drop the free rolling balls could disturb the balance of the truck by sloshing around

[Mayhem Eng.]

I will have to get a material quote and see how much they might run. I have no dim. or any info. on 40 series wheels so I would have to do some digging. Let me think about it. Mayhem Eng.


259 for a competitors aluminum beadlocks.
Im sure you would sell a few of these if you made em for a 40 series. Just thought I would ask......

[Mayhem Eng.]

Thank you sir. Mayhem Eng.


Mayhem, PM sent"thumbsup"

[hlb3]

Nice....That thing looks like it will rock....please send some action pics when you get a chance....."thumbsup"

Mayhem Eng.:)



Here's a few...

http://i19.photobucket.com/albums/b178/lburris/RC%20Crawlin/Mayhem%20beadlocks/P1050252.jpg

http://i19.photobucket.com/albums/b178/lburris/RC%20Crawlin/Mayhem%20beadlocks/P1050254.jpg

http://i19.photobucket.com/albums/b178/lburris/RC%20Crawlin/Mayhem%20beadlocks/P1050259.jpg

http://i19.photobucket.com/albums/b178/lburris/RC%20Crawlin/Mayhem%20beadlocks/P1050267.jpg

[Mayhem Eng.]

Those will make the new web page....Nice shots. Looks killer on the rocks."thumbsup" Good job!!!! Thanks Mayhem Eng.

I really like the 1st pic. It covers everything. Sweet!!! actually all of them....

[hlb3]

Those will make the new web page....Nice shots. Looks killer on the rocks."thumbsup" Good job!!!! Thanks Mayhem Eng.

I really like the 1st pic. It covers everything. Sweet!!! actually all of them....

Thanks! They work great and really hold the bead nicely. Thanks for making such an awesome product! "thumbsup"

[eric113]

you guys going to get stickers made ?

[Mayhem Eng.]

Yes we are, we are working with fishmaxx for stickers and freq e tag on a logo for shirts and other things. We hope to have it all worked out in the next week or so. Thanks Mayhem Eng.



you guys going to get stickers made ?

[tru]

finally got mine cant beleave you actually put all the screws in...
http://i9.photobucket.com/albums/a74/soyer/photo-24.jpg

[Mayhem Eng.]

It takes time but the reason is so the area where the bead drops into will not get damaged. Thanks Mayhem Eng.


Clarify the engraving for me I think I know what the first 6 letters stand for but what about the last 3 Is it actually barbque?

[tru]

yes it is actually barbeque haha.. I was bored and could think of anything else to put

[Brandon]

yes it is actually barbeque haha.. I was bored and could think of anything else to put

:lol: Why not huh

['04 Rubicon]

Here are a couple pics of these sweet wheels. Thanks Mayhem! "thumbsup" These things are so nice, the quality is impecable and just the idea and design is so innovative, I love showing them off. I started a thread with the build these are going on. http://www.rccrawler.com/forum/showthread.php?t=111588

[TEDROCKZ]

Yes we are, we are working with fishmaxx for stickers and freq e tag on a logo for shirts and other things. We hope to have it all worked out in the next week or so. Thanks Mayhem Eng.
Make sure you make some that shows well on black please.


04 Rubicon, curious as to how much weight your going to add^^^, if you dont mind sharing.

['04 Rubicon]

04 Rubicon, curious as to how much weight your going to add^^^, if you dont mind sharing.

Not sure yet. I was thinking 2-3 oz per wheel in the rear, and 4-6 oz per wheel up front. I like a lot of weight. I'll probably start out light then add if I feel the need.

[Mayhem Eng.]

Hey 04' rubicon I noticed that the ring second from the left is different from the rest, just spotted in your pic. I will send out a new one as soon as I can. Sorry about that. Thanks Mayhem Eng.

['04 Rubicon]

Wow Mayhem. You have very good eyes. I didn't even notice until today. It is not the flush centered ring like the others. Thanks for the heads up and for sending out the correct one. That's what I call quality customer service.

[rckcrawler]

Man I look at this thread everyday and I think to myself that i should have ordered those before I ordered my new chassis. I think i might put a set of these wheels as my backgroound on the computer. Give the wife a hint. Next month I hope I can get them, I just haven't figured out what color and what I want on the wheels. once again sweet wheels!!!!



Also what size servos is everybody running with these wheels?

[Mayhem Eng.]

As far as servos, I have no idea.....If you want, order your wheels now and I will hold them until you are ready. We are running a batch as I write this. We will be shipping the week of the 31st Thanks Mayhem Eng. Free shipping for the military. Can't go wrong with that....


Man I look at this thread everyday and I think to myself that i should have ordered those before I ordered my new chassis. I think i might put a set of these wheels as my backgroound on the computer. Give the wife a hint. Next month I hope I can get them, I just haven't figured out what color and what I want on the wheels. once again sweet wheels!!!!



Also what size servos is everybody running with these wheels?

[NIK]

Man I look at this thread everyday and I think to myself that i should have ordered those before I ordered my new chassis. I think i might put a set of these wheels as my backgroound on the computer. Give the wife a hint. Next month I hope I can get them, I just haven't figured out what color and what I want on the wheels. once again sweet wheels!!!!



Also what size servos is everybody running with these wheels?


you wont need a bigger (stronger)than your using now"thumbsup"

[StIcK kInG]

Shirts and stickers,I can't wait! Those updated smaller center hole rings look killer! Thats whats up!"thumbsup" Wanted to also mention, that is way cool of you to offer free shipping to the military. Good lookin' out for our troops Mayhem"thumbsup" Keep up the outstanding work!

[TK421]

I will have to order a set of these after I get my DMG chassis rolling. These things are sweet, sweet!!

Lou

[Mayhem Eng.]

To everyone with orders in, we will be shipping the week of the 31st towards the end of the week. Thanks Mayhem eng.

[BigBaller]

I will edit this post soon as I have them on my rig now. WOW! These are some seriouly cool wheels. Thanks Mayhem for ALL the options. Customer service, quality, and great shipping."thumbsup" Money well spent. I will be back...Bigballer!

Grimace out.

[Mayhem Eng.]

Thanks...looking forward to the pics. Thanks Mayhem Eng.

[Chaotic Crawlers]

Nice! I cant wait, that means when they get here I can start sleeping again"thumbsup"

[Mayhem Eng.]

Your killin' me"thumbsup".....Thanks

[TK421]

So what is the average lead time between production runs? I think you have a great product and I can't wait to get a set. I won't be able to order till June but I know it will be worth the wait. Keep up the good work!

Lou

[Mayhem Eng.]

About 2.5 weeks or so, depending on what I have on the machines. All I see for the next month or so is wheels. Thanks Mayhem Eng.

[Stuck]

Awesome wheels Mayhem"thumbsup"

http://sn4wd.com/~joel/Blackjack/slides/IMG_3386.JPG

[Mayhem Eng.]

Thank you sir. awesome rig.....I like it..."thumbsup"

[rockwood330]

u have a pm sir hope im not to late :?:

[Brandon]

Got my wheels!! These things are awesome! Cant wait to get home and get everything mounted up "thumbsup" Thanks Mayhem

Pics soon ;-)

[TRA3905]

I just ordered mine, can't wait!!!

[Brandon]

Got my wheels!! These things are awesome! Cant wait to get home and get everything mounted up "thumbsup" Thanks Mayhem

Pics soon ;-)

Here you go Mayhem. Thanks again "thumbsup"

[Mayhem Eng.]

Nothing less then a win this weekend right.......Good luck."thumbsup"

[rckcrawler]

I can't wait for mine any pics on the new batch of wheels. You will have money in paypal account Tuesday.

[Mayhem Eng.]

Well be working on them all weekend......Mayhem Eng.

[rckcrawler]

Well be working on them all weekend......Mayhem Eng.

That is good to hear."thumbsup"

[promatchrcr]

Sent a PM, gotta have set of these!

[DARKHORSE]

Payment sent, Thank you sir"thumbsup"

[Brandon]

Nothing less then a win this weekend right.......Good luck."thumbsup"

Thanks man, 2nd place. Sorry I let you down :lol:

Saw 3 or 4 sets of DP's out there :shock: They are taking over!

[Mayhem Eng.]

2nd place and running Mayhem's"thumbsup""thumbsup" I like it...way to go!!!! Thanks Mayhem Eng.

[DarkMathew]

Payment sent, and i am very excited about these wheels:)

Matthias

[Mayhem Eng.]

If you have an order in it will ship friday. Thanks Mayhem Eng.

[SwissSteph]

PM send with question ... Thanks in advance for your answer ;-)

Stephane

[falloout]

PM SENT
thanks