Delrin 2.2 Competition from Mayhem Eng.

[Mayhem Eng.]

Mayhem Engineering is proud to introduce the Black Delrin 2.2 Competition Beadlock Wheels

Available at the End of April 2008

The Delrin 2.2 Competition Beadlock will feature the newly redesigned locking ring

The wheel has all the benefits of the Mayhem
Competition Double Phatty

Weight 7.4 ounces

Delrin 2.2 Competition Beadlock comes with

4 Black Delrin Rims
8 Black Anodized 6061-T6 Alum. Rings (4 fronts / 4 backs)
4 Rings include engraving
16 9/16 chrome bearings
128 Stainless steel screws
All wheels come with 16 M3 threaded mounting holes per side with either a 16 hole ring or 8 hole ring (benefit of 8 hole ring is if you lose a thread you can clock the ring to the next set of threaded holes - extending the life of the wheel)
Lifetime Replacement Warranty (excluding hardware and anodize)
For more information see the Thread in the Vendors Section titled "Mayhem 2.2 Competition Double Phatty"

Reserve Your Set Now!!!!!
We will be making 45 sets on this run...

We are excepting pre-orders (no payments excepted at this time).
Pre-order will put you on the "reserve list". You will be notified 1 week prior to shipping about payment info.

$130.00 includes shipping within the U.S.A. Patent Pending

(photo below features old style ring)
58908

2.2 Mayhem Delrin Competition ME-1005
with Competition 16 Ring ME-2004-16

(photo below features redesigned ring)
(Black anodized ring on left is old design)
58909

[bcrofts]

cool im in

[BlueMonster]

That is such a cool idea. I am in...

[Mayhem Eng.]

Got it, Thanks Mayhem Eng.

[Mayhem Eng.]

These are some sweet wheels......The weight of these feels good and with the center boss machined in it makes the center of the wheel stronger. Less likely to bust the center out on hard hits that we have seen in other designs. We also beefed up on the amount of material where the axle comes through (made the floor thicker) Lifetime replacement warranty. Thanks Mayhem Eng.

[Thorsteenster]

Is the 7.4oz with 4 BB's in a wheel?

[Mayhem Eng.]

Yes, One complete wheel. 1 wheel 2 rings 32 screws and 4 bearings.


Is the 7.4oz with 4 BB's in a wheel?

[chip cross]

You can put me down for a set

[Mayhem Eng.]

Done....Thanks

You can put me down for a set

[StIcK kInG]

Lookin' good Mayhem! 45 sets are gonna go fast,These look killer! "thumbsup"

[dezfan]

Look fantastic, but to many GD bolts!:lol:

[Mayhem Eng.]

You are the man StIcK KInG.....You set is going out today....Thanks


Lookin' good Mayhem! 45 sets are gonna go fast,These look killer! "thumbsup"

[Mayhem Eng.]

I'm starting to here more of that......We do have an 8 hole ring you can run both front and back. The 8 hols rings allow you to clock the ring to the next set of threaded holes in case you loose a thread. So you have a choice of rings styles..Thanks Mayhem Eng.


Look fantastic, but to many GD bolts!:lol:

[Scattman]

Put me down for a set. They look nice.

[Mayhem Eng.]

Got it and thanks.

Put me down for a set. They look nice.

[noRCal]

sweet cant wait im in.

[Mayhem Eng.]

come eeepee I see you, you need a set....lol

[EeePee]

To compare to my Heavy MSDs, I'd prefer the aluminum version.

Such a cool concept...

[gone_wheelin]

Sweet. But me down for a set too.

[Tupers]

I'll take set.

[Mayhem Eng.]

7 down and 38 to go....Thanks Guys Mayhem Eng.

[Fishmaxx]

I like the idea being able to move weight around ;-)

With this set up you could take bearings out of the rear and add the to the front if needed.

Whats the offset of these wheel? (or track width on a stock AX10)"thumbsup"

[STANG KILLA SS]

killer.

[upnover1]

I'm in for a set:)

[Cajun]

I'll take a set.

[Mayhem Eng.]

Thanks Guys...Mayhem Eng


I'm in for a set:)

I'll take a set.

[jeepcj578]

I like the idea being able to move weight around ;-)

With this set up you could take bearings out of the rear and add the to the front if needed.

Whats the offset of these wheel? (or track width on a stock AX10)"thumbsup"


can we get a pic of the back side of the wheel"thumbsup"
thanx

[Mayhem Eng.]

This offset is the same as any our p/n ending in W (ME-1001-W)

59833

1st Offset - .443 (11.25mm) this is a negative offset, meaning that the bottom of the hex is as close to the hub side as possible. (see diagram) This offset offers a wider track width. (see photos below)

http://www.rccrawler.com/forum/attachment.php?attachmentid=55025&d=1201915548

This is courtsey of EeePee

[gone_wheelin]

Will you be offering engraving on the outside rings with these as well?

[Mayhem Eng.]

Yes, You can get engraving on any ring we make as long as there is room. Thanks Mayhem Eng.

[gone_wheelin]

Yes, You can get engraving on any ring we make as long as there is room. Thanks Mayhem Eng.

Is there an additional fee for that? And if so, what is the cost?

[Mayhem Eng.]

It's included in the price for the 2.2 comp. wheels both alum. and delrin. In the other wheels such as the spiders, "7" , and phattys it's $20.00 for the engraving. So if you ordered a set of spiders and wanted engraving + shipping it would be $85.00 + $20.00 + $10.00 = $115.00 total

Mayhem Eng.

[Mayhem Eng.]

We will be starting on these in about 2 weeks. Thanks Mayhem Eng.

[gone_wheelin]

Cool, thanks.

[dragonracing]

ok im in for a set.

[Mayhem Eng.]

Thank you.

[rockbound]

great idea! great looking wheel.

[Hawk Mortimer]

I'll take a set of these Delrin wheels, Black rings with 8 holes, "HAWK" engraved 180 deg. apart (black screws).
I would also like a second set of rings just like the above set.

Thanks Mr. Mayhem. "thumbsup"
Hawk

[Mayhem Eng.]

You got it, done deal. Thanks Mayhem Eng.

[dragonracing]

do i need to tell you what i want engraved on my wheels right now? i allready know what i want. dragonracing / warcrc . with red rings. gotta show the love for the club!

[Mayhem Eng.]

About a week before we are ready to ship I will let everyone know and then you can give me that info. We will have to let everyone know about pp and so on. Thanks mayhem Eng.

[Mayhem Eng.]

We will be starting on these next week sometime. Thanks Mayhem Eng.

[dragonracing]

please cancel my order. not able to swing it for now. thanks you.

[Mayhem Eng.]

Not a problem thanks for letting us know....Thanks Mayhem Eng.


please cancel my order. not able to swing it for now. thanks you.

[Stormin2u]

These a very nice option a little lighter than the Double Phatty. I mounted tires on my Double Phatty's tonight and I must tell you it was a really smooth and easy mounting. I was a little surprised because it's a kind of a blind mount on the full face ring but they went together smooth as glass.

[Mayhem Eng.]

Glad to here that. And Thanks. Please post some pics when you get a chance. Thanks Mayhem Eng.

[BigBaller]

I am in for a set. I need to speak in PM's for a slight request. Thanks. Looking forward to these wheels. LOVE my Double Fatty's, the idea is top notch. You will be getting my vote for wheel of the year in 08!"thumbsup"

Thanks.

Ryan

[Mayhem Eng.]

Got you on the list, and thanks for the support earlier today..Mayhem Eng.


I am in for a set. I need to speak in PM's for a slight request. Thanks. Looking forward to these wheels. LOVE my Double Fatty's, the idea is top notch. You will be getting my vote for wheel of the year in 08!"thumbsup"

Thanks.

Ryan

[Cajun]

I can't wait to get my set in. This will be my first set of really nice crawler wheels. I have some brand new Hammers at the house just waiting to be slapped on 'em. "thumbsup"

[gone_wheelin]

When do we need to send payment?

[Mayhem Eng.]

I'm getting ready to order the material soon, I will let you guys know. Thanks Mayhem Eng.



When do we need to send payment?

[Mayhem Eng.]

For everyone waiting on the 2.2 comp. delrin wheels we are running about 2-3 weeks behind on this wheel. Trying to get all the 2.2 alum. stuff out and working on 1.9 stuff. so please hang in there. Thanks Mayhem Eng.

[gadge]

whens the next run?..to late for this one?
didnt need anything special

[Mayhem Eng.]

We are running somewhat behind actually alot behind. It's not to late to get in on this run. I can put your name on the list and let you know when we get ready to run them. We will be ordering the material tomorrow and will most likely start sometime next week as soon as I get the material. Thanks Mayhem Eng.

[Mayhem Eng.]

Ok guys material has been ordered and should be here May 9th We will be shipping the week of the 19th or sooner no outside process for the wheels only the rings. We will pm everyone on the list to make sure that you still want a set. If your on the list and have changed your mind don't sweat it we understand. For anyone who would like to order please let us know.

Thanks Mayhem Eng.

[Mayhem Eng.]

Material just got here, we will be starting on them Monday.

Thanks Mayhem Eng.

[Mayhem Eng.]

I just want to let everyone know thats waiting on the delrin comp. wheels that we are running behind on these, I wanted to start on them last Monday and we didn't make it. It looks like it will be this Monday that we start. I'm behind on some orders and trying to get caught up on them and thats where I'm at. So please hang in there I will get them to you guys as soon as I can. Thanks Mayhem Eng.

[Mayhem Eng.]

We have started them and they will ship the end of next week.

Thanks Mayhem Eng.

[Mayhem Eng.]

Just a heads up on everyone with an order in, all the wheels are at the plater not sure if we will get them back tomorrow? I will post up as soon as I know?

Thanks Mayhem Eng.

[Mayhem Eng.]

For those who have an order in, the plater was not finished with my order your wheels. Monday being a holiday it will be sometime next week when I get them. I will post up as soon as I have them.

Thanks Mayhem Eng.

[Hawk Mortimer]

I be confused Mr. Mayhem, Thur. you said ("everyone with an order in, all the wheels are at the plater not sure if we will get them back tomorrow?"), then on Friday you said ("For those who have an order in, the plater was not finished with my order your wheels.").

I am assuming you are making referance to the RINGS being at the plater not the wheels. Delrin doesn't require plating does it? ;-)

Not one that like's to assume.

Thanks (like your product, hange in there, and keep up the great work),
Hawk

[Mayhem Eng.]

Correct on the anodize. For the delrin orders I'm referring to the rings being plated. Trying to keep everyone up to speed and using one message to cover all the different threads I have going on.

Sorry for the confusion Mayhem Eng.



I be confused Mr. Mayhem, Thur. you said ("everyone with an order in, all the wheels are at the plater not sure if we will get them back tomorrow?"), then on Friday you said ("For those who have an order in, the plater was not finished with my order your wheels.").

I am assuming you are making referance to the RINGS being at the plater not the wheels. Delrin doesn't require plating does it? ;-)

Not one that like's to assume.

Thanks (like your product, hange in there, and keep up the great work),
Hawk

[Mayhem Eng.]

For everyone with an order in thats been waiting, I just got off the phone with the plater and he said he would be done late wednesday afternoon. So we will be boxing tomorrow night and shipping until everyones order has gone out.

Thanks Mayhem Eng.

[RCbasher]

PM sent :)

[Mayhem Eng.]

Wanted to let you guys know we got the wheels and rings back from the plater about ten minutes ago. We will be shipping until everyone who has an order in is ship.

Thanks Mayhem Eng.

[PapaGeno21]

Nice man. These things are sick! Cant wait to get them, Im going to put the panther tires on them!

[Mayhem Eng.]

Just to let you guys know, Mayhem Eng. will be closed until Monday, we will be on the beach in northern calif. till sunday night. If you have any questions or would like to place an order please still do and we will process them on Monday. Here is our pp rccarparts@yahoo.com (rccarparts@yahoo.com) in pp make sure we have all of your shipping info. and user name and restate your order.

Thanks from the crew at Mayhem Eng.

[Speedracer19]

Are any of these wheels (Delrin ) still avbl.?
Donnie Jackson

[Mayhem Eng.]

Yes sir, we have them in stk.

Are any of these wheels (Delrin ) still avbl.?
Donnie Jackson

[Mayhem Eng.]

Heads up to everyone who is waiting on wheels. I just got off the phone with the plater and he will not be done with my order your wheels until next Thursday. He has 3 people out either sick or hurt so he is short handed. If your wheels have no plating your wheels we start shipping tomorrow. Sorry guys this is out of my control. I will let you know if things change.

Thanks Mayhem Eng.

[gone_wheelin]

Got me new wheels a couple of weeks ago before leaving for vacation. One word. SWEET!!!!!

Modded them with the breather hole mod and they performed flawlessly.

Here's a shot of them on my comp rig. Notice the custom engraving too, awesome work as always Mayhem.

[Brown4]

Got my wheels in today and mounted them up. These wheels are perfect in every way just like the Alum. sets. These wheels were the ticket for my comp truck to lose some weight and still keeping the looks and functionality of the Alum. version. Easy to mount and can hold a bead like if it's life depended on it. Great work once again by Mayhem Engineering.

http://i67.photobucket.com/albums/h286/mikep_photo/GrapplerandDerlinwheels010.jpg
http://i67.photobucket.com/albums/h286/mikep_photo/GrapplerandDerlinwheels013.jpg
http://i67.photobucket.com/albums/h286/mikep_photo/GrapplerandDerlinwheels004.jpg
http://i67.photobucket.com/albums/h286/mikep_photo/GrapplerandDerlinwheels005.jpg

[Knytemare]

Do you have any of these left? I know what I want engraved. "thumbsup"

[Mayhem Eng.]

We don't have any in stk. right now. We will be making some more next week. Let me know. Thanks Mayhem Eng.



Do you have any of these left? I know what I want engraved. "thumbsup"

[hellbentrodder]

Where did Brown4 get the mayhem decal?

[Mayhem Eng.]

I believe it's painted on?


Where did Brown4 get the mayhem decal?

[hellbentrodder]

well then, You gonna be making some decals?

[Mayhem Eng.]

I'm struggling to just make wheels. We have plans for doing just that. The problem is getting the time to see it through. But it's coming.

Thanks Mayhem Eng.


well then, You gonna be making some decals?

[Knytemare]

Got your PM ... please keep me on the list! I tried to PM you back but it refused to be sent. Next week actually works out better for me in the end.

[Knytemare]

Any word on these? Anxiously awaiting them. If these aren't available I may go for your aluminum ones.

[Mayhem Eng.]

We have some going up next week. If you want a set you need to place an order. Just let me know what you would like so we can it on the order sheet. We have alot of orders and have not been able to keep them in stk. (a good thing)

If you have any questions just let me know. Thanks Mayhem Eng.



Any word on these? Anxiously awaiting them. If these aren't available I may go for your aluminum ones.

[U DOWN]

Awesome rims very TUFF"thumbsup"

[Knytemare]

Just wondering if you have gotten these yet?