Rocksmith Titanium AX-10 Locker Presale!

[Rocksmith Eng.]

These are now shipping.

Made from solid Titanium 6AL-4V titanium with a tensile strength of 130000psi. Yes thats right 130,000psi. These come with a Ti cross pin as well. It has been machined to allow the axle a lil more depth in the locker as well. I will get a new pic posted soon.

Tired of stripping lockers? This should help!
I have been running mine for 2 months now with almost no sign of wear.

Price will be $35 per piece with standard shipping or add another $3 for priority shipping per shipment. Shipping cost for 10 or more pairs will be $8 for priority.

PP info is
rocksmith@rocksmithengineering.com

Please include in the comments what you are ordering and your screen name so I can get a hold of you on here.

Parts will start shipping on 3/31. I know there is gonna be a large quantity of these ordered so please be patient.

Special pricing will be available for large quantity orders, so pm me for details.

Thanks "thumbsup"
Dennis

[ecoli]

So is that $35 for each locker or for a pair. With it being Ti, I'm assuming that's each.

Curious if the dimensions for the axle slots are the same as the stock ones, or tightened up to remove that stock slop?

[bac_ky408]

awsome...

[mtnyote]

i want a pair, but thats a lotta dough:shock: probably worth it though"thumbsup"

[Cave Dave]

At that price he's almost doing the machine work for free. Price some 6AL-4V titanium some time,it's NOT cheap. Nice looking work and the price is very fair for what you're getting."thumbsup"

[dragonracing]

i talked to him at the last comp and he said that the tolerences were tighter to take up the slop. i will be getting some soon. the stock ones suck. new ones and 2 comps and they are slopped out.

[Rocksmith Eng.]

Yep tolerances are going to be snug.

Also I have been running my rear Ti locker for over a month now. Crawling almost daily on my testing ground and not being nice to her. I took apart my axle to see the wear. There was absolutely no signs of wear at all. This will be the last locker you ever buy!

Shipping will start on time as well. 3/31 they will be in the mail for all who preordered.
And for those who preordered you will also get a free item with it! But that will be a surprise...........

[RXcrawler]

Shipping will start on time as well. 3/31 they will be in the mail for all who preordered.
And for those who preordered you will also get a free item with it! But that will be a surprise...........

Awesome!!! Just in time for the East Coast Comp."thumbsup"

[rbgerrish]

Payment sent for 6. Thanks!

[TURTLE]

Im very interested in these lockers for my racer. But what happens if I strip one will there be any kind of warranty? Or do I just get a prize for being the first?:lol: Or both?

[dragonracing]

strip one ? ????? c'mon youll snap an axle before you strip one. get real man. :shock::twisted:

[Rocksmith Eng.]

I highly doubt you could strip one. But in this kind of sport anything is possible. I have been running a prototype in my rig for a month and a half and it shows no sign of use. The production units are tighter than the proto's, so I highly doubt its gonna strip. Axles slide in about half way, then you have to lightly tap them to get them fully seated. They are tight! Just the way I like it. "thumbsup"
Had a major snafu today to. Had all my coding for the machine dialed in this morning and started the production run. Then the power went out and lost all my code. Battery back up power supply for the computer tomorrow!
So all the preorders will go out on April fools day. Everyone who preordered is getting a couple extra treats so I hope that they make up for the delay.

[TURTLE]

strip one ? ????? c'mon youll snap an axle before you strip one. get real man. :shock::twisted:

Hey anything is possible. I dont doubt I break an axle before I strip it but how many axles will I break before Something happens to the locker. Did I mention it will be going 40+mph???? And a CVD upgrade is also coming... And through MIP a life time warranty is provided on all their CVD's. Just want to know "if" it happens"thumbsup"

[Rocksmith Eng.]

Hey anything is possible. I dont doubt I break an axle before I strip it but how many axles will I break before Something happens to the locker. Did I mention it will be going 40+mph???? And a CVD upgrade is also coming... And through MIP a life time warranty is provided on all their CVD's. Just want to know "if" it happens"thumbsup"

Lets just say that when I was using my locker I twisted a straight axle 90 degrees without any damage to the locker.
At this point I cant say "Lifetime warranty". These are still very new and only been tested for the last 2 months. I will say they are the best locker on the market, period!
If your out to destroy them Im sure you could. No grease in the slot would be a good way to increase wear and damage.
But how many stock aluminum lockers will you go through to make the titanium pay for themselves? Or how about blowing a locker in the middle of a comp? "thumbsup"

[RXcrawler]

I have had great service from Rocksmith.

I don't think these Ti lockers will need a warranty. I mean your going from Aluminum to Titanium. Plus these have have tighter tolerances so the initial slop that the stockers have so the locker and axles won't be constantly wearing on each other every time the truck moves.

Between these and the Heavy duty Axial gear my axles should be bomb proof especially when the CVD are avaliable.

[Josh87]

I have had nothing but exceptional service from Rocksmith. His products are great, and these lockers are as well.

[Flash]

Im gonna have to get a pair. My stockers wont last to long.

[RXcrawler]

Got my lockers today!!! Look great I'll post up more info later.

[Rocksmith Eng.]

Havent had much feedback on these lil units. Guess thats a good thing. "thumbsup"

[Josh87]

Got them installed this last weekend, the fit is awesome. There is no slop in the locker at all, had to press them in. Nice work....:grin:

[hkusp45]

Are there any more available?

[Rocksmith Eng.]

Are there any more available?

I have 4 lockers and cross pins available. "thumbsup"

[ussprinceton2004]

do you have any left?

if not, when are these going to be back in stock?

[crawlbe4youwalk]

saawweett!!"thumbsup"