___SALE, $62.50 for BeadLocks___

[Eritex Inc.]

Thats right kids, $62.50 gets you a set of (4) machined Erickson BeadLock wheels....shipped in the U.S.A. I haven't decided how long the sale will last, so snap them up at this price. Think of it, you could get 2 complete sets of beadlocks for about the same price as others charge for 1 set"thumbsup"

First is the "Comp Heavy"
http://i15.photobucket.com/albums/a353/ShyGecko/RD400/DSC_0002copy.jpg

http://i15.photobucket.com/albums/a353/ShyGecko/RD400/DSC_0004copy.jpg

http://i15.photobucket.com/albums/a353/ShyGecko/RD400/DSC_0021copy.jpg

Next, the "Solid"
http://i15.photobucket.com/albums/a353/ShyGecko/030308-2copy.jpg

http://i15.photobucket.com/albums/a353/ShyGecko/030308-1copy.jpg

http://i15.photobucket.com/albums/a353/ShyGecko/RD400/DSC_0017copy.jpg

And the "Dirty Dozen"
http://i15.photobucket.com/albums/a353/ShyGecko/030308-3copy.jpg

http://i15.photobucket.com/albums/a353/ShyGecko/030308-4copy.jpg

http://i15.photobucket.com/albums/a353/ShyGecko/RD400/DSC_0018copy.jpg

And the rings that come with them.
http://i15.photobucket.com/albums/a353/ShyGecko/RD400/DSC_0026copy.jpg

Specs....

2.2 beadlock wheel

Wheel Material----Black Delrin

Width------------1.250"+- without rings

Offset------------.250" +- without rings

Hex--------------12mm by .192" deep

Through hole-----5mm

Hardware--------3x.5x10mm black oxide (S.S. optional)

Rings------------.125" 3003 AL

****NOTE****
These wheels will require drilling out if you are using stock Axial hexes or are running CVD's.






The wheels come in pairs, so you can mix and match how you like. I am fully stocked on all of these wheels and even have a couple sets of the white "Solids" left.

As for payment, Paypal, Money Order, check, and cash are accepted. Money order and check purchases take 7 to 10 days to process. If using Paypal, please leave your RCC screen name in the comment section. This price is only for RCC members.

Also, shipping insurance can be added for an extra $5.00.

Any questions, feel free to PM, E-mail, or post.

Thank you,

Gerame Erickson
Eritex Inc.

Paypal address.................gwwerickson@inbox.com


For international shipping, please PM me.

[Offroader5]

White solids you say?......White acetal I assume? That might be cool. Too bad I couldn't get them in white and comp heavy's :-(

[Eritex Inc.]

White solids you say?......White acetal I assume? That might be cool. Too bad I couldn't get them in white and comp heavy's :-(

If you want some, I can through some white Delrin in the machine in the morning and make you a set of 4. Let me know.....

[Offroader5]

If you want some, I can through some white Delrin in the machine in the morning and make you a set of 4. Let me know.....

For the same price or would it be a touch more?

[Eritex Inc.]

For the same price or would it be a touch more?

Same price, I will just put white blanks in vs black blanks. It will take about 30 minutes to machine them. I could have them ready to ship Thursday.

[Dickie691986]

when you say you'd have to drill out to fit the axial hexes do you mean for the little nub to fit threw?

[Offroader5]

Same price, I will just put white blanks in vs black blanks. It will take about 30 minutes to machine them. I could have them ready to ship Thursday.

Cool "thumbsup" Paypal sent...(with a bit extra) 8)

[Eritex Inc.]

when you say you'd have to drill out to fit the axial hexes do you mean for the little nub to fit threw?

What I mean is the wheel is drilled through with a 5mm drill. This way, guys running TLT's can use them. All you need to do to get these wheels to work on an Axial is either shave the extra stub off the hex, or drill/ream out the wheel a little.

[Dickie691986]

What I mean is the wheel is drilled through with a 5mm drill. This way, guys running TLT's can use them. All you need to do to get these wheels to work on an Axial is either shave the extra stub off the hex, or drill/ream out the wheel a little.

thats what I thought. put me down for a set of your Comp Heavy wheels. paypal being sent rite now. "thumbsup"

[Crawlerguy851]

I can attest to the quality of the wheels, they look great.

[Dickie691986]

I all ready own one set of the older ones. "thumbsup"

paypal sent let me know if you got it.

[Eritex Inc.]

I all ready own one set of the older ones. "thumbsup"

paypal sent let me know if you got it.

Payment received"thumbsup"

[emaxxjeremy]

any chance on some 1.9's?

[Eritex Inc.]

any chance on some 1.9's?

In the works. I needed to get the 2.2 thing down before I tackled any more projects. :lol:

[dezrik]

Do you still have the "white" solids?

[jeeper_05]

I would be interested in possibly some 1.9s with 6 holes!

[Sinastir]

Payment sent for a set of Comp heavy. Thank you

[fastz14]

I would buy 2 sets of 1.9s for this price!!! Let us know when they are ready. thanks

[Eritex Inc.]

Do you still have the "white" solids?

Yes I do.....

[mann0mann]

What I mean is the wheel is drilled through with a 5mm drill. This way, guys running TLT's can use them. All you need to do to get these wheels to work on an Axial is either shave the extra stub off the hex, or drill/ream out the wheel a little.

I would like to order a set, could you tell me - what would you drill them out size wise for the an AX-10 axle? 6mm? or something in-between a standard size? The only reason I ask is the ax-10/wk hexes are "stepped" with two diameters.

Thanks!

-Mike

Also any issues mounting up the new pro-line tires - badlands, hammers, etc? I just got a set of MSD's and they will not hold the bead. There is an issue with the thicker width of the beads on these tires and a thread going on right now with lots of problems. :-(

[Offroader5]

I would like to order a set, could you tell me - what would you drill them out size wise for the an AX-10 axle? 6mm? or something in-between a standard size? The only reason I ask is the ax-10/wk hexes are "stepped" with two diameters.

Thanks!

-Mike

Also any issues mounting up the new pro-line tires - badlands, hammers, etc? I just got a set of MSD's and they will not hold the bead. There is an issue with the thicker width of the beads on these tires and a thread going on right now with lots of problems. :-(

I have an older set of MSD's (not the new Rocksolid design), and have no problems mounting up the Hammers to them and they hold just fine. As far as I know, the bead on these and the MSD's are almost identical.

[chivas72]

payment sent for a set of comp heavies

[sjg90125]

Payment sent for a set Comp Heavies

[Eritex Inc.]

I would like to order a set, could you tell me - what would you drill them out size wise for the an AX-10 axle? 6mm? or something in-between a standard size? The only reason I ask is the ax-10/wk hexes are "stepped" with two diameters.

Thanks!

-Mike

Also any issues mounting up the new pro-line tires - badlands, hammers, etc? I just got a set of MSD's and they will not hold the bead. There is an issue with the thicker width of the beads on these tires and a thread going on right now with lots of problems. :-(


You need to drill the center hole out to .275" to clear the stock Axial hex. The wheel already has the .040" pocket in the hex as you can see in this picture....
http://i15.photobucket.com/albums/a353/ShyGecko/030308-1copy.jpg

As far as tire issues, I have not had or heard of any. I know a couple guys that are running the Badlands with out any problems. MSD beadlocks have a different ring and bead groove design.

[blue-beard]

Wheels look great! "thumbsup"
Is it possible for you to put a 14mm hex into the wheels instead of a 12mm hex? If so any additional cost?
Thanks

[mann0mann]

thank you.

payment sent for dirty dozen.

-Mike

[Gimpy00Wang]

PayPal sent for a set of (4) Erickson BeadLock Comp Heavy wheels!

- Chris

[Dickie691986]

when will these ship?

[Eritex Inc.]

when will these ship?

All wheels ordered to this point are being packaged right now and will ship in the morning, so 4/03/08.

[wallaz]

Did you manage to get a price for shipping to the UK as per my PM???

[4u2nv]

What the heck.... Payment sent for a set of "Dirty Dozen" wheels. Let me know that you received it. Thanks"thumbsup" Still waiting on the "Split 5 Spoke" though...

[Jeeper Creeper]

I have 2 sets of older MSD's and they have held up perfect! "thumbsup" Do you have any pics of the heavy and the 12 holer showing the front side with the rings on that you can post? I am done (almost) with the old style wheels and having to glue the tires on. I only have 8 sets of 2.2 beadlocks now so I can really use another set or 4 what with all these friggen new fangled gotta have or you ain't squat tires coming out. :roll: Thanks

I would rather screw than glue. ;-)

[RCMFMaxxMan]

gah I want some but my bank account is low right now :( any estimation on how long this sale will last?

[wrightcs77]

Just ordered 2 sets of comp heavies.

[Eritex Inc.]

I have 2 sets of older MSD's and they have held up perfect! "thumbsup" Do you have any pics of the heavy and the 12 holer showing the front side with the rings on that you can post? I am done (almost) with the old style wheels and having to glue the tires on. I only have 8 sets of 2.2 beadlocks now so I can really use another set or 4 what with all these friggen new fangled gotta have or you ain't squat tires coming out. :roll: Thanks

I would rather screw than glue. ;-)

I don't have any on this computer, but check out this thread. It has a bunch of pictures takern by customers.....

http://www.rccrawler.com/forum/showthread.php?t=108626&page=4

[rockwerks]

good price any wheely king offset style? like zero offset?

[kwkride]

good price any wheely king offset style? like zero offset?

I'm running a set on my WK and they work great!

[rockwerks]

I'm running a set on my WK and they work great!

How wide is your WK to the outside of the tires?

[RCMFMaxxMan]

Eritex: any chance of getting some pictures of the white delrin version?

[TIMZKRAWLER]

pay pal sent for a set of the "dirty dozen"...thanks

[wallaz]

Payment sent for a set of Comp Heavy.
If postage works out to be more let me know."thumbsup"

[kwkride]

How wide is your WK to the outside of the tires?

I'll measure it tonight and let you know.

[Stuck]

Just sent payment for 2 set of comp heavies

[kwkride]

How wide is your WK to the outside of the tires?

I'm running Losi Rock Claws and they are just under 11" from outside edge to outside edge.

[Eritex Inc.]

***April 5, 2008***
Please disregard this post, distributer issues have been rectified.



Guys, I got some bad news from my distributer today. My Delrin rod that was set to show up 4/4/08 will not be here till 4/10/08. this would not have been an issue but I didn't expect to sell 100+ wheels in 24 hours. I will be doing a stock check in the morning, but there will be a slight hic-up in availability but all wheels ordered to this point have either shipped or are shipping in the morning. I believe standing stock is around 100 wheels right now, but not positive.

Any questions, feel free to PM or E-mail me,

Thanks,

Gerame Erickson
Eritex Inc.

[hitman46mod]

Friday, I will send a paypal payment for a set of solids."thumbsup"

[Eritex Inc.]

Distributer issues are cleared up, standing wheel stock is high, production continues, and all wheels that have been ordered to this point have been shipped.


If you want wheels, I have them ready to ship. Just please leave your RCC name and what style you would like in your Paypal info.

Thanks for reading,

Gerame Erickson
Eritex Inc.

[Thorsteenster]

How much rod do you usually buy at a time?

[RCMFMaxxMan]

i'm still curious to see some pictures of the white delrin wheels.

[Eritex Inc.]

i'm still curious to see some pictures of the white delrin wheels.

Here are some "Solids" on a local guys Axial. He is running the rings backwards...
http://i15.photobucket.com/albums/a353/ShyGecko/RD400/Whitewheelpicture.jpg

[RCMFMaxxMan]

thanks for the pic! they look good

[Nicklepimp]

I believe you can dye the white ones too."thumbsup"

[metomwhou]

Any chance of the Heavies in white, huh, huh, huh? If not, plain ole black will do, I guess!

[sparky0068]

Here is the "Dirty Dozen" black delrin
http://i254.photobucket.com/albums/hh88/sparky0068/corner.jpg

These are the white solids dyed black
http://i254.photobucket.com/albums/hh88/sparky0068/oops.jpg

[Eritex Inc.]

Any chance of the Heavies in white, huh, huh, huh? If not, plain ole black will do, I guess!

White Comp Heavies are available. I just thought people wouldn't like them:lol:

[metomwhou]

White Comp Heavies are available. I just thought people wouldn't like them:lol:

Well that was easy!! Let me know if shipping to APO is problem for you, if not, I'll send out a paypal payment this afternoon"thumbsup"
Tom

[dezrik]

Dang i wanted White Comp heavies, Do you have some avalible?

[Eritex Inc.]

Dang i wanted White Comp heavies, Do you have some avalible?

Yes I do....

[BitHed]

...so these prices are still 'live'? Plus the overseas shipping price you just quoted me Eritex?

[Eritex Inc.]

...so these prices are still 'live'? Plus the overseas shipping price you just quoted me Eritex?

Yup, $62.50 plus the shipping charge I pm'ed you would be the total for a set of (4) wheels"thumbsup"

[kawika]

Any chance of getting a pair of the comp heavies with the hexes flush with the back of the wheel? Basically the same offset as the early delrin MSD beadlocks.

[chivas72]

just received mine this weekend (friday to be exact )

i was wondering these need breather holes but never had solid delrin beadlocks before what would be the best place to make them i don't want to mess them up

they are awsome ! ! ! ! great work on this and for the price.....they can't be beat

[Nicklepimp]

Check out this link:

http://www.rccrawler.com/forum/showthread.php?t=99957&highlight=msd+breather

I've been doing this, and it works great. Keeps the wheel looking nice and clean."thumbsup"

[chivas72]

Check out this link:

http://www.rccrawler.com/forum/showthread.php?t=99957&highlight=msd+breather

I've been doing this, and it works great. Keeps the wheel looking nice and clean."thumbsup"

thanks great idea ! ! !

helps that you are en eritex driver

[Etype R]

I ended up drilling out all 8 backside bolt holes like that with my Eritex beadlocks. That way I don't need to remember which one is drilled.

[Sinastir]

I recieved mine today... Great wheels.. Thank you very much..."thumbsup"

[TIMZKRAWLER]

recieved mine today as well ....thanks for the great deal and fast shipping...any idea how long this price will last ??

[Offroader5]

I just got my white Comp Heavies all mounted up today. Very nice set of wheels...and at this price, you shouldn't pass it up. Didn't even add any weight. Completely assembled...9.7oz with M3 Hammers and my own mem foam. Going to have to go out this weekend and flog them good :lol:

http://smg.photobucket.com/albums/v126/offroader5/Wheely%20King%20RC%20Crawler/th__MG_4237.jpg (http://img.photobucket.com/albums/v126/offroader5/Wheely%20King%20RC%20Crawler/_MG_4237.jpg?t=1207623111) http://smg.photobucket.com/albums/v126/offroader5/Wheely%20King%20RC%20Crawler/th__MG_4236.jpg (http://img.photobucket.com/albums/v126/offroader5/Wheely%20King%20RC%20Crawler/_MG_4236.jpg?t=1207623141) http://smg.photobucket.com/albums/v126/offroader5/Wheely%20King%20RC%20Crawler/th__MG_4235.jpg (http://img.photobucket.com/albums/v126/offroader5/Wheely%20King%20RC%20Crawler/_MG_4235.jpg?t=1207623192)

[Trikster]

Wow, those look fantastic! Shame I am into 1.9's at the moment... Might have to pick up a set just cause. How hard would it be to machine out the centers to fit a Bruiser hub?

[Eritex Inc.]

Wow, those look fantastic! Shame I am into 1.9's at the moment... Might have to pick up a set just cause. How hard would it be to machine out the centers to fit a Bruiser hub?

Can you PM me a picture? It has been a long time since I owned a Bruiser:lol:

[metomwhou]

Hey Gerame,
Sorry to clutter up your thread but your PM box is full. Just wondering if you'd found out about shipping to an APO or not.
Thanks,
Tom

[Trikster]

Can you PM me a picture? It has been a long time since I owned a Bruiser:lol:
You replied (or rather tried too) to my PM, but my box was full... Seems your in the same boat now. Tag, your it! "thumbsup"

[Hurley0706]

Got two sets in today. Assembled them at my desk........shhhhhhh :lol:


I put the black Delrin rings that came with my 5 spokes on to the Comp Heavies just for a little smoother surface since they will be more used for comp stuff.

http://i125.photobucket.com/albums/p56/jtbusa/PIC-0131.jpg

[Sinastir]

Thank you for making a great wheel. I mounted my proline badlands on the comp heavy. I tried to pull the tire from the bead and almost ripped the tire first. Thanks again"thumbsup"

[Dickie691986]

eritex,

I wrote you a message letting you know that my wheels never came. and I also asked for the tracking number. when can I get an answer?

[Eritex Inc.]

eritex,

I wrote you a message letting you know that my wheels never came. and I also asked for the tracking number. when can I get an answer?

You have been PM'ed;-)

As for everyone that has tried to get in contact with me this week, sorry. My son and I got the flu (the real kind, not the stomach bug people call the flu) on Monday and have been laid up. The good thing is, it gave me a lot of time to work on new offset wheels. Pictures to come"thumbsup"

[Hurley0706]

I got the flu on Monday and have been laid up.

So your saying I shouldn't have licked my wheels when they came in?

I don't think it needed to come to biological warfare, it's on now!

[Eritex Inc.]

So your saying I shouldn't have licked my wheels when they came in?

I don't think it needed to come to biological warfare, it's on now!

Did you notice a funny taste while licking them? I was play " Hide Josh's wheels" right before packaging yours up:lol:

[carver]

I would like the comp heavys please I will PP now. Thanks.

[Eritex Inc.]

******SALE PRICE ENDS 4/18/08 AT 9:00PM CST****


After that the price will return to the pre-sale price of $75.00 per set shipped in the U.S.A.












Still a pretty good deal at that price"thumbsup"

[Trikster]

Any word on the Bruiser versions?

[Eritex Inc.]

******SALE PRICE ENDS 4/18/08 AT 9:00PM CST****


After that the price will return to the pre-sale price of $75.00 per set shipped in the U.S.A.












Still a pretty good deal at that price"thumbsup"



Sale ends in 4 hours, just a reminder for the ones who want in on this sale.

Gerame Erickson
Eritex Inc.

[4u2nv]

Any word on the Bruiser versions?

This has my attention as well...

[Eritex Inc.]

This has my attention as well...

This has been an idea I have been working on at night. 2AM is a great time for these small run things.

[NU2KRAWLIN]

I won a set of your wheels at the ECC comp, very high quality. Thanks Scott