Rokza 2.2 Beadlock Wheel for Clod

[rc4wd]

http://tracgear.com/product/rc4wd/wheel/beadlock/BL34/g1/BL34.jpg

http://tracgear.com/product/rc4wd/wheel/beadlock/BL34/g1/BL34-1.jpg

[Tupers]

Awsome rims. Do you know how wide a complete axle would be with these fitted?

[rc4wd]

285mm/11.22inch

[crawl rookie]

What happend with the rims i designed for you guys?? told me that you was machining tam in march and sending me a prototype set?:-(

That way it tucked the hub way more in and is was suited for tlt/ax10's too!

This rim does look nice but i dont think many comp clod drivers like the functionality cause we all want tho narrow our trackwith to something like 10,5'' to 11 inches but not any wider than that ;-).

Is my design that i made for you in the bin or will you be offering that wheel also,

Nice design but it should be better with no offset;-)

[Thorsteenster]

Yeah, while being within the rules, most want narrower track widths.

[carbonuts]

Nice design but it should be better with no offset;-)


I agree with this, the narrower the better for clod guys.

0 offset would be killer

[run2jeepn]

Looks like a nice set of Beadlocks for Wheely Kings.

[carbonuts]

Looks like a nice set of Beadlocks for Wheely Kings.

Wheely Queen offset works very well on clod axles."thumbsup"

[run2jeepn]

Wheely Queen offset works very well on clod axles."thumbsup"

They work, but I wouldn't say very well... They can be better?

[STANG KILLA SS]

i like them rc4wd. looks great.

[run2jeepn]

They do look great don't get me wrong.... Mount up a set of your Krazy Crawler Tires and see what the Clod's Track width is at.

[crawl rookie]

Any updates on these, they were planned for march :-(

[rambuller84]

Uhhhh... After I strip the ano from those they'll look great on my WK.

[srjeeper]

What is the back spaceing in mm's.would look good on my CR-01.

[crawl rookie]

Any updates on the clod design wheel i sent you??;-)

[rockwerks]

Yep Zero Offset!

Clod, Wheely king, TXT, Juggernaut, all those axles need a ZERO OFFSET RIM, why waste your time doing what you already have. Ive already had 3 sets custom made because there are very few correct offset rims. Let me say it again ZERO OFFSET is what we need"thumbsup"

DID I mention ZERO OFFSET!?:lol:

[crawl rookie]

Yep Zero Offset!

Clod, Wheely king, TXT, Juggernaut, all those axles need a ZERO OFFSET RIM, why waste your time doing what you already have. Ive already had 3 sets custom made because there are very few correct offset rims. Let me say it again ZERO OFFSET is what we need"thumbsup"

DID I mention ZERO OFFSET!?:lol:

Yep that's what we meant, i think:lol:

These are the wheel design i gave to RC4WD to produce:
zero offset and the reverseble 100% offset plate
http://i54.photobucket.com/albums/g110/Bloepie/achter.jpg
http://i54.photobucket.com/albums/g110/Bloepie/Beadlockvelg-1.jpg

Good luck RC4wd! please help us like you said;-)

[Grizzly4x4]

Yep Zero Offset!

Clod, Wheely king, TXT, Juggernaut, all those axles need a ZERO OFFSET RIM, why waste your time doing what you already have. Ive already had 3 sets custom made because there are very few correct offset rims. Let me say it again ZERO OFFSET is what we need"thumbsup"

DID I mention ZERO OFFSET!?:lol:
So you want the mounting hex dead center in the wheel from left to right? ;-)

The more correct terminology would be "full positive offset".

http://www.tirerack.com/wheels/tech/techpage.jsp?techid=101

[carbonuts]

Yes FULL positive offset"thumbsup"
All the way to the outer edge with the wheel about an inch wide!"thumbsup"

[crawl rookie]

Waht happend to the wheels i designed for you guys?
1 inch wide, 100% offset, exchangeble for axial/txt owners too"thumbsup" due the hex plate.
And now for the Berg owners usefull to;-)

I very thankfull for the Rokza rims you sent to me though!
But they make the rig a bit too wide:-(

[rc4wd]

crawl rookie, YGM

[Culetto]

Did anyone ever try these on the Raptor's? On rc4wd's site it says for raptors and clods but the giant 'C' on the raptors looks like it might rub. I was going to order a set this week but i want to be sure they will work. I sent an email to rc4wd but i was curious if anyone out there had any wheel-time with these.

[crawl rookie]

They fit on my Clod txt and Axial so yes tghey will fit on a raptor axle.

I think the clod axle has bigger or same size c´s.
The wheel wont go over the c´if that is what you mean, it will make your narrower than a normal comp wheel does"thumbsup"
"thumbsup"

[Culetto]

Thanks