**Pre-View JP Berg-OCM-Newage LockOuts** [Archive]

run2jeepn

07-24-2008, 11:46 AM

http://www.jpcustomrcs.atomicshops.com/f/design/t_header_right.jpg?1216922576359

Here is a Pre-View of the Jp Custom Rc's Berg Lock Out.

No Cutting, No Drilling, Direct Bolt up.

This is a Knuckle Replacement Part

These are no Bigger then the Stock Knuckles and don't take up anymore room.

I have these worked out. So after you install these. Just rotate you axles so instead of the C's going up and down. Rotate the C's so they are horizontal with the ground. This will give you even more clearance.

These have also been design to take aftermarket CVD's. When they come out.

$24.99 I will also post More pic's soon.
http://i34.photobucket.com/albums/d133/run2jeepn/OCMAXZZ091.jpg
http://i174.photobucket.com/albums/w94/spg7565/DSC_2715.jpg
http://i174.photobucket.com/albums/w94/spg7565/DSC_2713.jpg

These are the Finished product....
http://i174.photobucket.com/albums/w94/spg7565/DSCF2205.jpg
http://i174.photobucket.com/albums/w94/spg7565/DSCF2206.jpg

Tupers

07-24-2008, 12:04 PM

very cool "thumbsup". Now I just need a set of berg axles :roll:.

chip cross

07-24-2008, 12:08 PM

Put me down for a set R2J

BILLYGOAT

07-24-2008, 12:19 PM

great design.

Mic

07-24-2008, 12:22 PM

"thumbsup"Looks real nice.

binaryterror

07-24-2008, 12:44 PM

Est $?

BoNuS LiNe

07-24-2008, 12:50 PM

nice work"thumbsup"

run2jeepn

07-24-2008, 12:57 PM

Thanks guys.. I will have a Price and be taking Pre-Orders very soon. I figured these would be nice for tha fact. I have already seen a few guys Build these as 2.2's... Then changed them to Supers. Since these you don't have to cut anything. You can reuse your old Stock knuckles for Steering. Also if you plan on selling your Axles down the road. Would be make them easier to sell.

More Coming soon.

dezfan

07-24-2008, 01:43 PM

Looking good Jarod, another great product from JP Custom RCs!"thumbsup"

I'm sure I'll be bolting a set up soon.

Gatekeeper

07-24-2008, 02:01 PM

Those look great nice job"thumbsup"

Badd

07-24-2008, 02:30 PM

I can't wait to get a set . "thumbsup"

Stormin2u

07-24-2008, 02:35 PM

Your on a roll JP those look excellent.

Brandon

07-24-2008, 02:42 PM

Looks good man "thumbsup"

One quick question, when you rotate the axle tube to get teh C's horizontal wont your link mounts on the tube get rotated as well?

run2jeepn

07-24-2008, 02:47 PM

Looks good man "thumbsup"

One quick question, when you rotate the axle tube to get teh C's horizontal wont your link mounts on the tube get rotated as well?

Not on a PIMP CANE....:lol: Also on a Pimp Cane you have extra Mounting points for Electronic Plates or battery holders.

Ya, but an easy L bracket will correct that issue and relocate the mounts. Or just mount your Links and Shocks in the New location. All you are is rotating the axle Tubes 45*.... This would put your mounts for your Links and Shocks on top of the Tubes. Moves them up and out of the way as well. But like I said you don't have to rotate the tubes to use these lockouts.

Stormin2u

07-24-2008, 02:54 PM

When are we going to get a look at the Pimp Cane for the berg axles?

run2jeepn

07-24-2008, 03:20 PM

When are we going to get a look at the Pimp Cane for the berg axles?

All I'm waiting on is the CAD work to get finished up for the Brackets. I will have a few Prototypes before to long.

Stormin2u

07-24-2008, 03:36 PM

That's sounding good JP one more question about the Pimp Cane will it work with RC4WD's Bully axles as well?

run2jeepn

07-24-2008, 04:14 PM

That's sounding good JP one more question about the Pimp Cane will it work with RC4WD's Bully axles as well?

We will see. I'm one of the testers for the Bully Axles. So There will be a way for them to work on those as well.

redbaron

07-24-2008, 04:40 PM

Just rotate you axles so instead of the C's going up and down. Rotate the C's so they are horizontal with the ground. This will give you even more clearance.

With the wheel offset that most are running with these axles, I don't think you'll need to rotate the axle tubes for clearance. Most of the lockout will be tucked up inside the wheel.

run2jeepn

07-24-2008, 05:54 PM

With the wheel offset that most are running with these axles, I don't think you'll need to rotate the axle tubes for clearance. Most of the lockout will be tucked up inside the wheel.

Most, but not all. Not all wheels are the same width either. Also with a Pimp Cane Rotating those tubes allows the use of those extra mounting points for other things.

The rotating of the axle tubes can be done with any Berg with any lock out. Just something I though maybe a few could use. Besides.... This isn't a selling point for me and I don't want guys getting hung up on that part.

The Main thing about these. Is the fact they save your stock knuckles for use of maybe a future build. Or you have a couple of spare knuckles. In case you break a steering knuckle during a comp. Also these should be stronger since the lockout covers the Whole C's. So this should strengthen the whole outer axle housing.

redbaron

07-24-2008, 06:03 PM

The Main thing about these. Is the fact they save your stock knuckles for use of maybe a future build. Or you have a couple of spare knuckles. In case you break a steering knuckle during a comp. Also these should be stronger since the lockout covers the Whole C's. So this should strengthen the whole outer axle housing.

I agree! And I think its a good looking part. I'll more than likely be picking me up a set when you get them done.

Badd

08-02-2008, 02:05 AM

Any word on when these will be ready ?

run2jeepn

08-04-2008, 12:52 AM

Little Update..Getting much Closer. Whatcha think?
http://i174.photobucket.com/albums/w94/spg7565/DSC_2715.jpg
http://i174.photobucket.com/albums/w94/spg7565/DSC_2713.jpg

Rockcrawler

08-04-2008, 01:01 AM

:shock: Are you done yet? :lol:

I will definately be getting a set of these. "thumbsup" Nice work.

run2jeepn

08-04-2008, 02:54 PM

:shock: Are you done yet? :lol:

I will definitely be getting a set of these. "thumbsup" Nice work.

You need to get a Berg First....:lol: I'll be doing some Testing then on to production and Pre-Orders.

dezfan

08-04-2008, 03:02 PM

Perdy cool looking thar boss!"thumbsup"

redbaron

08-04-2008, 03:12 PM

I'll be doing some Testing then on to production and Pre-Orders.

Sell me a set! I'll beat the shit out of them......I mean test them!! "thumbsup"

eric113

08-04-2008, 08:30 PM

One suggestion, It really clean up the look.Count sunk screws.

Whats the price range going to be on these ?

BoNuS LiNe

08-04-2008, 09:19 PM

i'll take a pr

thanks

run2jeepn

08-04-2008, 09:38 PM

One suggestion, It really clean up the look.Count sunk screws.

Whats the price range going to be on these ?

I may do that, if there is enough Material to do so.

Rockcrawler

08-07-2008, 10:28 PM

You need to get a Berg First....:lol:

:flipoff::lol:

I will be getting one soon. "thumbsup"

Badd

08-08-2008, 02:04 PM

mine in the mail yet ? :-P

run2jeepn

08-09-2008, 01:57 AM

New Update: Price is set at $24.99 for the Pair. Reuses all the stock bearings and axles. Also Should allow CVD's when ever anyone makes them. There should be enough room still inside these to allow it.

I'm taking Pre-Orders Now at www.jpcustomrcs.com. Any orders outside of the US and Canada. Just PM me.

redbaron

08-09-2008, 06:02 AM

I'm taking Pre-Orders Now at www.jpcustomrcs.com (http://www.jpcustomrcs.com). Any orders outside of the US and Canada. Just PM me.

When do you expect them to be shipping?

Racer4Life

08-09-2008, 07:10 AM

When do you expect them to be shipping?

Hopefully before Nats.....since you'll need them before then.:lol:

run2jeepn

08-09-2008, 09:44 PM

I'm working on it guys. Won't be that much longer. Thats whats nice about an item like this. It either works or doesn't.

sddill

08-11-2008, 05:40 AM

I ordered 2 sets "thumbsup""thumbsup"...

Can't wait to try them :!:

Agama

08-11-2008, 12:13 PM

Just ordered a set "thumbsup" can't wait to get my berg rolling.

AKRCC

08-13-2008, 05:14 PM

great looking product! Nice job on making it look super clean. Looks pretty beefy and comp worthy. "thumbsup"

redbaron

08-16-2008, 12:37 PM

Whats the new word on when these will be shipping?

run2jeepn

08-17-2008, 09:57 PM

Updated Pic's..

Next to the Stock Knuckles and Lockouts
http://i174.photobucket.com/albums/w94/spg7565/CIMG1561.jpg

Straight on Shot mounted up with Wheels and Tires. The Wheels are 2.2 Stampede Wheels with the Outer bead Cut off. ( Gave me about a 10-1/2in Track width.) Anyway you can see not much sticks out at all. And even more will be covered up with Aftermarket Berg Beadlocks. Like Mayhems.
http://i174.photobucket.com/albums/w94/spg7565/CIMG1557.jpg

And here is the little Tip you can do to gain even more Clearance. Since you have to Drill and clock the rear axle anyway. Make it where the lockouts are flat with the ground. This tip would work with any aftermarket lock-out.

http://i174.photobucket.com/albums/w94/spg7565/CIMG1560.jpg

Badd

08-18-2008, 02:04 AM

when will mine be in the mail ? :-P

dezfan

08-18-2008, 07:36 PM

Looks like a very nice piece and no cutting!"thumbsup"

Agama

08-20-2008, 09:18 PM

What's the status on these? I need them for my build.

sddill

08-23-2008, 05:22 PM

When are these shipping ???

victionone

08-24-2008, 02:50 AM

When are these shipping ???

Ditto on that. :)

run2jeepn

08-24-2008, 04:45 AM

They are production now. Shouldn't be that much longer at all. I will post up here when they ship.

Josh87

08-25-2008, 05:20 PM

Pre-Ordered a set. Can't Wait."thumbsup"

Badd

08-27-2008, 02:04 PM

I got my JP Berg-OCM-Newage LockOuts today . Beenin' a TEAM Driver has is perks. The bearings fit very tight . The lockouts themselfs had to lightly tapped on the axles . They don't move even before you put the screws in . The design was thought out to allow for CVDs down the road. If anyone ever gets them made . They took about 5mins. per side to install .That was removing the old knuckles and lockouts . I may clock the rear axle tubes later on . If I see they are going to cause a problem with hang ups . here is a few pics .......
http://i109.photobucket.com/albums/n68/Badd_Xample/OCM/jplockwheel003.jpg http://i109.photobucket.com/albums/n68/Badd_Xample/OCM/jplockwheel004.jpg http://i109.photobucket.com/albums/n68/Badd_Xample/OCM/jplockwheel005.jpg http://i109.photobucket.com/albums/n68/Badd_Xample/OCM/jplockwheel006.jpg http://i109.photobucket.com/albums/n68/Badd_Xample/OCM/jplockwheel007.jpg I should say that these are still the protos .

run2jeepn

08-27-2008, 03:21 PM

You can also run a Different Offset Rear Wheel. Which can give you a slightly Narrow Track width for the Rear.

So what can these Lock-Outs Offer: No More Ripping Sidewalls, Easy install, Stronger then stock, Should allow for CVD's down the road, Can be rotated for even more Clearance, No cutting, direct Bolt on...

The ones Badd has are the Proto's. The Production ones will be Black.

Josh87

09-04-2008, 11:24 AM

Are they done yet?:lol:

run2jeepn

09-04-2008, 11:26 AM

Are they done yet?:lol:

I should be hearing back any day now...."thumbsup"

run2jeepn

09-06-2008, 10:07 PM

Keep the Orders coming.. Time is getting very Close. I should have them anyday now...

Thanks goes out to everyone who has ordered already..

And Congrats to Badd for a 4th Place Finsh at the Nats this year. He was running my new Lock-Outs.

Badd

09-10-2008, 01:08 AM

run2jeepn

09-10-2008, 03:08 PM

Here are the Production versions... Bolted these up with Zero problem and in less then 5min."thumbsup" Reuses the Stock bearings and Axles...

Should be on there way to me right now... Place your orders to get a set from the First batch...
http://i174.photobucket.com/albums/w94/spg7565/DSCF2205.jpg
http://i174.photobucket.com/albums/w94/spg7565/DSCF2206.jpg

raul duke

09-10-2008, 03:10 PM

Looks good, I am sure the wait will be worth it.8)

frdtrkguy

09-11-2008, 10:08 AM

These look good, will they fit the HR MOA axles? Ive heard that the other lockout designes will but I like these better"thumbsup"

run2jeepn

09-11-2008, 10:12 AM

These look good, will they fit the HR MOA axles? Ive heard that the other lockout designes will but I like these better"thumbsup"

Not Sure.

frdtrkguy

09-11-2008, 12:11 PM

Not Sure.

Could you do a test fit? Id like to try a set.

Flyin Hawaiian

09-14-2008, 07:35 PM

order my set today "thumbsup"

run2jeepn

09-14-2008, 09:41 PM

Could you do a test fit? Id like to try a set.

Sure will. I'll let you now.

order my set today "thumbsup"

Thanks

These are going faster then I planned so hurry and get yours today. These will be shipping out in less then 2 weeks.

3.3 Over

09-15-2008, 08:27 PM

i need a set shipped over to Canada, i asked about something else before but lost our last contact - shoot me a line and i will pay pal the moola to ship these out

thanks !

edit* ordered up on your site just now !! looking forward to these lockouts

run2jeepn

09-15-2008, 08:30 PM

i need a set shipped over to Canada, i asked about something else before but lost our last contact - shoot me a line and i will pay pal the moola to ship these out

thanks !

You can order at www.jpcustomrcs.com.. Doesn't cost me anymore to ship to Canada. Then it does to ship in the US. "thumbsup"

3.3 Over

09-16-2008, 04:27 PM

You can order at www.jpcustomrcs.com (http://www.jpcustomrcs.com).. Doesn't cost me anymore to ship to Canada. Then it does to ship in the US. "thumbsup"

awesome, made an order last night and i'll be ordering more stuff tonight !! (same shipping charges has my business, I wish more vendors would do the same)

run2jeepn

09-16-2008, 09:59 PM

These should be on there way to me right now. So they could be shipping out to you nay day now. So for the guys who don't like to Pre-Order or wait... Now is a good time to Order..

Thanks to everyone who placed an order...