Rocksmith Titanium links, SALE SALE SALE!

[Rocksmith Eng.]

Until August 5th all custom links will be $10 a piece.
I normally sell links for $12 to $15 a piece depending on size. Now you can get a custom, 6al-4v titanium link set for cheaper than ever. But hurry, this wont last long.

You specify thread size
Revo = 8/32 thread
Traxxas = 6/32 thread
Axial = 3mm

Specify a shoulder to shoulder length if possible, if not, eye to eye will work. Just makes more work for me and I am overworked as it is.

These links carry a no question asked lifetime guarantee. You break one, send it back and get a new in the mail.
How many crawler products offer that kind of warranty folks?

Price will include standard shipping via USPS. If you would like priority USPS shipping add another $3

Be sure to include in the notes what you are ordering, screen name here, and what shipping you would like. Please allow a couple days for me to get them made and off to you.

My Paypal info is
rocksmith@rocksmithengineering.com

If you want the best, Ti it with Rocksmith Engineering products!

http://i174.photobucket.com/albums/w108/onsightsmith/rcstuff/newlinks.jpg

Thanks
Dennis

[Rocksmith Eng.]

And as a bonus, order a full set of links and get a free container of GearJelly folks!

[2JSC]

Would a full set be all 8? Uppers and lowers?

[jeep1969]

How much for the AX10 complete set? tks.

[Rocksmith Eng.]

Would a full set be all 8? Uppers and lowers?

Sure, this week it is. A full set is normally uppers, lowers and 2 steer links.
But for this deal, buy 8 links get a container of gearjelly free

How much for the AX10 complete set? tks.

For a full set, meaning ten links, it would be $100 plus shipping to Thailand.

[Rocksmith Eng.]

Last chance!
Sale will end at midnite tomorrow. "thumbsup"

[Rocksmith Eng.]

Sale ends tonight at midnite guys.
Get your Ti while its cheap!

[Rogueoffroad]

i'm in for a set of stock lenght axial lower links(4). I will pm you thanks

[Rocksmith Eng.]

Thanks for the great response to the sale.
As you can imagine I am swamped and working hard to get all the orders made and out to everyone. So please be patient they are all on the way.

Thanks again
Dennis

[SlickRockSpider]

Sale ends tonight at midnite guys.
Get your Ti while its cheap!


Nice price for Ti.

Evan

[Rocksmith Eng.]

Ok guys and gals.

Another Ti sale
Links 4.5" and under, $10
Links over 4.5", $15

These are custom made links to your spec and thread size. Made from solid 6al-4v Titanium .245 round stock. Come with a no question asked replacement guarantee!
No need for those cheesy set screws to connect your links to the rod ends. These have male Ti threads made just for your rod ends.

Paypal ifo is
rocksmith@rocksmithengineering.com

Please include what you are ordering, size and thread and what type of ends you plan on using with them.
I will include standard shipping via USPS to your door. If you would like priority shipping please include another $3 and note you want priority shipping

Dont miss out, this wont last forever!

[Master Basher]

What an amazing product. I just built my super and I thought my carbon fiber links looked blingy. These things look so sharp, and as an added benefit, they don't explode when you hit them on a rock like my cf links did.

Getting a custom made link made of Ti, this is an excellent price. I have 10 links on my super now, and I might just outfit my axial with ti too. I love 'em.

[NeXt559]

pm sent for custom steering links

[Rocksmith Eng.]

What an amazing product. I just built my super and I thought my carbon fiber links looked blingy. These things look so sharp, and as an added benefit, they don't explode when you hit them on a rock like my cf links did.

Getting a custom made link made of Ti, this is an excellent price. I have 10 links on my super now, and I might just outfit my axial with ti too. I love 'em.

Yep, you cant beat good ol titanium for a custom rockcrawler. "thumbsup"

[BUGEYE]

I just got a set from Dennis for my Hustler chassis. They are top notch!
They were sized perfect. The way to go.

[roksloski]

what is the outside diameter of the links???

thanx

[62PYRO]

Post 11 says they are made from .245 round stock.

[Rocksmith Eng.]

what is the outside diameter of the links???

thanx

Post 11 says they are made from .245 round stock.

You are correct. Its .245 +-.002
If your looking for something else I do have quite a few other sizes of ti round stock on hand.........

[Rev]

Pay Pal sent...

[AKRCC]

This sale still going on?

[Thorne_Dog]

This sale still going on?

The last post was about 4 moths ago...I'd assume not.

[AKRCC]

Pay Pal sent...

I saw this post and maybe he might know something I didn't. ;)

[Agama]

I just received my new Ti links from Rocksmith for my super. "thumbsup" Great product and service. This is my second order and I will be ordering more from him.

[CRAZYACE63]

I just received my new Ti links from Rocksmith for my super. "thumbsup" Great product and service. This is my second order and I will be ordering more from him.

Is he still on this board? I would like to get some links from him but I just need to know he's here before I send the order to him. Thanks in advance.

[Agama]

Is he still on this board? I would like to get some links from him but I just need to know he's here before I send the order to him. Thanks in advance.

Oh, yeah he is. Just send him a pm, Dennis is great to work with. I sent him a pm and had my custom length links in a week."thumbsup" You won't be disappointed. I've beaten my first set on my 2.2 like crazy and they are holding up great. Get the Revo ends, they are strong. This set up you won't have to worry about breaking anything like I've seen happen with Delrin. And the titanium slides on rocks really well.

[wrightcs77]

Curious to see your set of titanium links for the Losi. Maybe extend the uppers and lowers a hair to get a little closer to 12.5"????

[Rocksmith Eng.]

I tried making the links for the Losi out of 3mm threaded ends, not tight enough for me. So I have some new tooling on the way to make the 4-40 threads on the Losi.
Check my build thread in the Losi section for a preview of the Losi links

And yes my links are still $10 a peice for an axial based rig.
For the super rigs, with the much longer links, the cost can go up to $15 a peice.

My sole competition sells their links for $10 a peice and you can only get them in 5mm increments. Not to mention they are made out of 4mm Ti which creates a large lip at the rod end.
Mine are made from solid 6AL-4V Titanium centerless ground round stock with a diameter of .245. Much larger than my competitors' and doesnt create that lip at the rod end.

So if you interested in some Ti links, shoot me a pm for a quote on what you are needing as each and every order is custom made just for you.

Thanks
Dennis

[53 willys]

have you made any of these links with a bend in them yet???
can we order them with a bend?

[hardheaded]

Just received another set of these awesome links for my latest build, 4-link OG Bruiser. Great workmanship"thumbsup". Oh yeah, thanks for the stickers."thumbsup"

[Ripperfi]

have you made any of these links with a bend in them yet???
can we order them with a bend?

Ive been wondering that myself.

[53 willys]

Ive been wondering that myself.

i'm gonna have to say no?? it's been over a month with no response...I'm gonna try and build some myself.

[Ripperfi]

i'm gonna have to say no?? it's been over a month with no response...I'm gonna try and build some myself.

Yea Im guessing your right. Ive Pm'd about bent links and he never responded. Maybe you could give it a try and keep us posted on your efforts.

[cavecrawler]

Are you still making custom links? And if so is there any way you can make them with a bend in them like everyone is asking? LMK"thumbsup"