My CLiff Climber project...

[JavelinSST390]

As some of you may know, I won a DTX Cliff Climber on another forum. I wasn't planning on buying one, mostly because I was skeptical about the performance of the thing.

Once I got it, I was actually pretty surprised. It's really pretty capable.

Here's the pics of when it arrived:

http://i21.photobucket.com/albums/b273/JavelinSST390/SL380941.jpg


http://i21.photobucket.com/albums/b273/JavelinSST390/SL380942.jpg

Couple of poser shots:

http://i21.photobucket.com/albums/b273/JavelinSST390/SL380946.jpg

http://i21.photobucket.com/albums/b273/JavelinSST390/SL380947.jpg

http://i21.photobucket.com/albums/b273/JavelinSST390/SL380948.jpg

Then after I put a few stickers on it so it didn't look so plain: (Driven in and out)

http://i21.photobucket.com/albums/b273/JavelinSST390/SL380956.jpg

Then I decided to start modding. I bolted on my Ericksons and Pro-Line Flat Iron's just for shits and giggles, and I replaced the rear steering linkage with this little number, something for the "scary steering" pages. :flipoff:

http://i21.photobucket.com/albums/b273/JavelinSST390/SL380961.jpg

http://i21.photobucket.com/albums/b273/JavelinSST390/SL380958.jpg


But there's something wrong with mine. I've run it on 7.2v and 14.4v. Using ither one or two Intellect 1400 packs, and at 7.2v it's smooth as glass for controlled crawling, but it's just way under-powered.

On 14.4v it's got plenty of power, but it's all glitchy at low throttle. :-(

Also, for some reason, no matter what Tx I use, I have to have the throttle trim almost all the way out on the forward side or else it starts going backwards!

I think the ESC may be defective.

Anybody have any ideas?


My future plans include:

Holmes Cobalt 454's

All the metal gear guts for the axles.

CVD's

And once I get those mods done, I may just stick these axles under my Tube chassis and make this next year's comp rig. :lol: This thing will already do things that a stock Axial won't, and the COG is amazing with the battery(s) mounted to the axles and the weighted Erickson's.

[pandpmining]

I was interested in getting one of these from my son, keep us posted on how it all turns out. Might end up being something I turn out wanting as well.....:lol:

[twisted]

hows the rear steer work with the new link ?

as far as the esc goes ,call duratrax and see what they have to say. i know my dead band is pretty bad.

[BEAST02]

give duratrax a call, since you have a warranty there shouldnt be any problems.

[jetboat]

Thats the way mine was on freq radios...I switched to my dx3.0 and problems gone

[Stormin2u]

I'm really looking forward to seeing what can be done with both the CC and Mini Losi when the creative juices of RCC members start flowing.

I have a feeling that both these rigs are going to have an impact on the hobby.