How much weight needed for the front tires?

[driftin2crawlin]

i was reading all kinds of different amounts people had, so i put 5 on each tire which totals it to 2.5 oz. in the front. Is that good?

[uberalles]

i got 1.5 oz in each tire-
and 1oz to the bottom of the servo

3 oz total... and it has helped a ton

[the other 2.2 guy]

i had to cut the 1/4 oz weights in half to fit in the rim (tire side) so i have about 1 oz inside and 1 1/2 hub side per wheel. the i have 2 1/4 on the axel both on the servo and the top of the axel. for the rear i have the battery and only hub side weight so 1 1/2 oz per wheel. 4 full stick of sticky weights. it really helped. doesnt seem to hurt the servo yet, but i life to kill servos (i guess)

[uberalles]

i killed the stock servo
and the 1st replacement hitech (mighty mini 255)

on the 3rd one now... i run it until this gets warm and stop.....
kind sux

if the 3rd one dies i'll fab a new front plate and use a full size ... hitech 645

[BJoe]

I've put some 1/4 oz self stick wheel weights from Car Quest on mine. I put 6 pieces (1.5oz if my math is correct) on each front wheel and none in the back as of yet. The rear axle currently has the battery mounted on it until the next payday when I can get a little park flier li-po and charger for the truck. I may double the weight up front and the 1.5oz per rear at that point.

[driftin2crawlin]

some pics i took. i moved the battery in the back as told by my co-worker and added 1 1/4 to both front tires which totaled it to 2.5 oz. in the front.

some pics
http://i252.photobucket.com/albums/hh6/nickteamlosi24/ImportedPhotos00149-1.jpg
http://i252.photobucket.com/albums/hh6/nickteamlosi24/ImportedPhotos00142-2.jpg
http://i252.photobucket.com/albums/hh6/nickteamlosi24/ImportedPhotos00143-1.jpg
http://i252.photobucket.com/albums/hh6/nickteamlosi24/ImportedPhotos00146.jpg
http://i252.photobucket.com/albums/hh6/nickteamlosi24/ImportedPhotos00148.jpg