CAC's RG-1 beadlock

[createacrawler]

The RG-1 beadlock wheel was orignally designed for the Traxxass Slash. But since they are 2.2 they can also be used on other rigs as well. Since Traxxass decided to make a rolling change to their current wheel design I am now supplying the RG-1 with extra hubs so they can be used with other rigs whether it be a Slash with conventional 2.2's or your favorite crawler setup. The new hubs will provide the option of having the same offset in both front and rear where the Slash specific hubs will provide the two different offsets from front to rear. This makes them more versatile from rig to rig. Here are some pics."thumbsup" I also have a couple sets of black anodized rings to get the totally blacked out look. When I get time I will post up some more pics of the black rings and the hubs that come with each set along with back spacing specs.

a shot of the inboard ring
http://i188.photobucket.com/albums/z275/createacrawler/DSC04753.jpg

http://i188.photobucket.com/albums/z275/createacrawler/DSC04754.jpg

[bbyrd22]

When, where and how much?

[createacrawler]

I actually have them in stock and ready to ship. Let me know if you want a set."thumbsup"

[MOCRAWLER]

Oh man!!!! Why did'nt I wait. These wheels are awesome. I need more rigs to put wheels on . Beautiful!!!"thumbsup"

[4u2nv]

Man... I wish I wasn't so poor right now. I've been craving some of your new designs Troy... Hey BD got $5 I can borrow towards these:lol:

[JeremyH]

I have a set of these on my Slash and they are awesome! VERY easy to mount the tire.
http://i171.photobucket.com/albums/u287/z_hansenjm/RC/Slash/DSC01306.jpg

And they hold the bead QUITE WELL!!
http://i171.photobucket.com/albums/u287/z_hansenjm/RC/Slash/DSC01307.jpg

[createacrawler]

Thank you for the pics Jeremy!!!"thumbsup""thumbsup"

You guys need to check out my sig for a close out special on these wheels. (RG-1's) I'm closing them out because Traxxass changed the spec wheel on the Slash. My loss is your gain. Woo Hoo!!!!

The close out price is $80/shipped in the U.S."thumbsup"

[jimbiss]

PM sent "thumbsup"

[JeremyH]

Thank you for the pics Jeremy!!!"thumbsup""thumbsup"
No problem man! They show off these wheels nicely so I thought I'd repost them!!

[jimbiss]

New wheels :shock:

These CAC wheels are sweet. These are some of the RG-1 wheels that he originally made for the slash. In the one picture with the red circle, it gives me .125 clearance between the back lip of the wheel and the tie rod. The width from outside of the wheel to the outside of the other is right at 9" I think. Ans it should bring the wheels in closer to the same with as my rock sliders also.

http://i72.photobucket.com/albums/i169/jimbiss/TLT_scale/IMG_0585_sml.jpg

http://i72.photobucket.com/albums/i169/jimbiss/TLT_scale/IMG_0583_sml.jpg

http://i72.photobucket.com/albums/i169/jimbiss/TLT_scale/IMG_0580_sml.jpg

http://i72.photobucket.com/albums/i169/jimbiss/TLT_scale/IMG_0587_sml.jpg

These are sweet Troy "thumbsup""thumbsup"

[createacrawler]

Thanks for the great pics Jim! They look right at home on the Bronco"thumbsup"

[jimbiss]

Thanks for the great pics Jim! They look right at home on the Bronco"thumbsup"

I will post more up when I get tires mounted

[TLTRyan]

I have my RG-1's mounted on some AX-10 axles with Losi Claws. Width is 9.75 in the front and 9.5 in the rear measured from outside of tire.

Only pic I have of the setup. Its still a work in progress.
http://i20.photobucket.com/albums/b209/spoolinex/ax-10/IMG_0077.jpg

[jimbiss]

Not the best pic, but got the tires mounted

http://i72.photobucket.com/albums/i169/jimbiss/TLT_scale/IMG_0595_sml.jpg

[JeremyH]

Ryan, that truck looks awesome!!