1:6 scale Nylint rockcrawler photo gallery

[Got Rocks?]

Post pics of your nylint 1:6 Jeeps and 1:6 Scorpions


EDIT:

Message from the Mods:

This thread is a pictures only thread. It is a gallery so that people coming in can see what can be done to the Nylint 1:6 crawlers, and to show off your work. If you have questions about someone's truck in here, PM them or look for their buildup thread elsewhere in the 1:6 forum. I want to keep this area free of clutter. If you want to see other examples of clean galleries, check out the clod or small scale section. Also, if you have updated pictures of your truck, simply edit your post instead of creating a new one. Thanks!

[Got Rocks?]

http://img277.imageshack.us/img277/3/jeepn3pn.jpgheres mine as stock
and here it is as of now
http://img393.imageshack.us/img393/9462/jeep47vw.jpg
http://img393.imageshack.us/img393/3203/imgp03137tx.jpg

[90DEGREES]

here is mine.
http://img210.imageshack.us/img210/2919/rc11as.jpg (http://imageshack.us)

http://img210.imageshack.us/img210/2366/rc25hx.jpg (http://imageshack.us)


http://img155.imageshack.us/img155/8051/test0493sf.jpg (http://imageshack.us)

[1bigtracker]

http://www.omghi2.us/april05/RC-%20blue%20and%20silver%20poser%20pic.JPG

Stu

[ygohome]

heres some "poser" driveway shots.

We've got about 30 minutes on film and I'll get that linked here soon. These things will crawl pretty much anywhere you point them. Lots o fun.

The only mods I made (if you can call them that) are:
- painted roll bar flat black - but after a few rollovers the blue shows thru.
- removed the nerf-bars from along the bottom of the rockerpanels
- removed the front and rear diff gaurds... they eat up alot of clearance if left on.

I may try to relocate the coilovers upper mounting points or remove a few wraps of the coils to soften the springs a little in order to get better flex - but left stock it works great as you can see. I backed the jeep up onto that tire on its own power.

And the black RC jeep in the one photo belongs to my nephew. He got it as ToysrUs about a month ago for $50.

- Ben

warning... these are large pics

http://www.photodump.com/direct/ygohome/PICT0088.jpg
http://www.photodump.com/direct/ygohome/PICT0089.jpg
http://www.photodump.com/direct/ygohome/PICT0090.jpg
http://www.photodump.com/direct/ygohome/PICT0091.jpg
http://www.photodump.com/direct/ygohome/PICT0092.jpg

[Mudinyeri]

Here are a few posers of mine. Nothing much done to it at this point other than removing the skid plates and step tubes and adding a Mudinyeri Offroad decal! :)

http://i6.photobucket.com/albums/y221/Mudinyeri/RC%20Rock%20Crawler/IMG_2012.jpg

http://i6.photobucket.com/albums/y221/Mudinyeri/RC%20Rock%20Crawler/IMG_2011.jpg

http://i6.photobucket.com/albums/y221/Mudinyeri/RC%20Rock%20Crawler/IMG_2010.jpg

Edit: LOL It looks like we Rubicon owners have a penchant for these little rigs! How does your nephew's RC rig compare to the Nylint?

Edit 2: A few more pics in more "natural" surroundings.

http://i6.photobucket.com/albums/y221/Mudinyeri/RC%20Rock%20Crawler/IMG_2048.jpg

http://i6.photobucket.com/albums/y221/Mudinyeri/RC%20Rock%20Crawler/IMG_2049.jpg

http://i6.photobucket.com/albums/y221/Mudinyeri/RC%20Rock%20Crawler/IMG_2047.jpg

http://i6.photobucket.com/albums/y221/Mudinyeri/RC%20Rock%20Crawler/IMG_2046.jpg

http://i6.photobucket.com/albums/y221/Mudinyeri/RC%20Rock%20Crawler/IMG_2045.jpg

[SolaceOfWinter]

http://www2.propichosting.com/Images/450000539/2.JPG
http://www2.propichosting.com/Images/450000539/1.JPG
http://www2.propichosting.com/Images/450000539/3.JPG

[gtxracer]

He made a thread about the Bikini top...

--------------------------

Mine-



Stripped the body...

http://img.photobucket.com/albums/v289/gtxracer/Nylint%20Crawlers/100_1060_small.jpg

And after 1 coat of bedliner and 3 coats of grabber geen....

http://img.photobucket.com/albums/v289/gtxracer/Nylint%20Crawlers/100_1064_small.jpg

http://img.photobucket.com/albums/v289/gtxracer/Nylint%20Crawlers/100_1065_small.jpg

http://img.photobucket.com/albums/v289/gtxracer/Nylint%20Crawlers/100_1068_small.jpg

http://img.photobucket.com/albums/v289/gtxracer/Nylint%20Crawlers/100_1069_small.jpg

[spencurai]

Here is one of the ones I bought and painted for a friend today. The paint os krylon fusion sating black. the roll bar and sliders are krylon fusion burgundy. I have another one with burgundy body, black sliders and grey roll cage...because I ran out of flippin black and I am in the middle of the wyoming wilderness stuck on a gas drilling rig...

http://phonese.cx/2005/08/16/Picture019.jpg


http://phonese.cx/2005/08/16/Picture001.jpg

[911rc]

Border Patrol....

http://www.supermotors.org/getfile/235745/fullsize/DSC00033.JPG
http://www.supermotors.org/getfile/235744/fullsize/DSC00032.JPG

[Dazz]

Mine right after the 18 hours initial charged.

http://img.photobucket.com/albums/v123/Dazz1/Crawler/DSCF0604.jpg

Coundn't stand the bling out wheels and I started my first of many mods to come.... :mrgreen:

http://img.photobucket.com/albums/v123/Dazz1/Crawler/DSCF0611.jpg

[iflyos]

Just got mine painted up...Still working on the passenger, but have the driver in.

Color is Patriot Blue Krylon Fusion. Cage is satin black Krylon Fusion. Wheels are satin also, beadlock rings Testors Silver.

Thanks go to my wife for the driver and the fire extinguisher. She also picked out the passenger, though he isn't in the Jeep yet.

http://home.triad.rr.com/ag4rz/images/P1010002.JPG

Here is a link to more pics:

http://home.triad.rr.com/ag4rz/images/

The first 8 pics are of the new paintjob and details, the following pics are of the first crawl with it at my secret rock garden....


Also, anyone in the Triad area of NC interested in crawling, shoot me a message. ILooking to crawl with some more people!

Tim
AG4RZ

[homer27]

here's a pic of my 1:6 nylint so far (new paint)
http://www.rcpics.net/view_single.php?medid=63459


http://www.rcpics.net/view_single.php?medid=63603



http://www.rcpics.net/view_single.php?medid=63605

[Nylint Customer Service]

Hey Guys,

Just wanted to let you know that we will be putting up pictures of your custom crawler on our website at www.funrise.com. We want to see the best external modifications out there. We will also have contest for the best lookin crawler of them all!

please send your entrees to consumerservice@funrise.com, include your name, city & state.

Thanks!

BTW i got a crawler in my office that i just cant put down!

[jason]

Here's mine

[MendoZJ]

Finnaly got my 1:6 in the mail yesterday, it took all my will power to wait the full 18 hours to charge, but it was worth it, these things are fun. So far I only painted the sliders blue, but I plan on painting the rest black to match my 1:1
http://www.puderproductions.net/Pictures/YJ%20Carpenteria%205-9-05/YJBigDitchFlexSide.jpg

Pics from today
http://www.puderproductions.net/Pictures/RC/RockFlex.jpg
http://www.puderproductions.net/Pictures/RC/SickAir.jpg
http://www.puderproductions.net/Pictures/RC/Downhillflex.jpg

[ygohome]

action photos:

http://www.photodump.com/direct/ygohome/ToyJeepLEDs003.jpg
http://www.photodump.com/direct/ygohome/ToyJeepLEDs007.jpg
http://www.photodump.com/direct/ygohome/ToyJeepLEDs012.jpg

those last two were blurry. sorry bout that.


- Ben

[Rockwag91]

Here is a link to some pics of mine. Only mods so far are, moving the rear shocks in and removing the skid plates. The paint is by far the best thing i have done.
http://mywebpages.comcast.net/pwrwgn/StevesRCwheels.html
Rockwag91

[robert97dodge]

Just joined the site. Here are some pics of mine. I got the 1:18 last night and was able to try it out today and liked it so much I drove 30 minutes away to find the big one.

http://www.txwheelers.com/modules/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=7306&g2_serialNumber=2

http://www.txwheelers.com/modules/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=7309&g2_serialNumber=2

http://www.txwheelers.com/modules/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=7321&g2_serialNumber=2

[ScGRaceR]

heres mine,

Modifications: Stickers (custom :flipoff: ), removed diff skid plate


i have 10 pics :) (sry if some of them are blurry my camera broke had to use the "house camera") got it today LAST ONE AT WALLY WORLD! Suckas :flipoff:

http://img274.imageshack.us/img274/6973/nylint20040ry.jpg

http://img274.imageshack.us/img274/752/nylint20061em.jpg

http://img274.imageshack.us/my.php?image=nylint20118dt.jpg

http://img43.imageshack.us/img43/9288/nylint20122vq.jpg

http://img245.imageshack.us/img245/4917/nylint20135xb.jpg

http://img245.imageshack.us/img245/2928/nylint0032xy.jpg

http://img245.imageshack.us/img245/5377/nylint0053sn.jpg

http://img245.imageshack.us/img245/6243/nylint0076xn.jpg

http://img245.imageshack.us/img245/1486/nylint0075un.jpg

http://img245.imageshack.us/img245/4779/nylint0083ar.jpg

http://img245.imageshack.us/img245/2990/nylint0087gy.jpg

http://img245.imageshack.us/my.php?image=nylint0092us.jpg




last one if my fav :)

[Lynn]

Just joined the board. Got mine this weekend and painted it to match my TJ. Here's some pics from wheeling at Rausch Creek Off-Road Park in PA. More pics at http://www.imageevent.com/tealj

http://photos.imageevent.com/tealj/tealjjr/websize/DSC00039.JPG

http://photos.imageevent.com/tealj/tealjjr/websize/DSC00046.JPG

[Deviljeep]

BLING!


http://i20.photobucket.com/albums/b233/Deviljeep/e4dc1163.jpg

http://i20.photobucket.com/albums/b233/Deviljeep/41eea041.jpg
The second is kinda shaky, but you can see a little of the bling arms too.

http://i20.photobucket.com/albums/b233/Deviljeep/ProjectBLING006.jpg

[SevenX]

Here are some of mine-
crawling around the house yesterday afternoon :)

[ManYuM]

Mine

http://photobucket.com/albums/y108/ManYuM/NyLint%2010%20septembre/

[lifenajeep]

Thought I would add a few more pics of the course we are building. Here in Louisiana we have to buy our rocks...:?

http://img.photobucket.com/albums/v157/lifenajeep/DSC02469.jpg

This one is named Squirrel hill.

http://img.photobucket.com/albums/v157/lifenajeep/DSC02470.jpg

[Ilikerocks]

Mulcaster Island, Thousand Islands, Gan, CA


http://pic17.picturetrail.com/VOL863/3479111/8411749/113175671.jpg
http://pic17.picturetrail.com/VOL863/3479111/8411749/113175675.jpg

[chadw_3]

This is my jeep not really moded just painted :twisted: http://img34.imageshack.us/img34/5475/00013379gi.th.jpg

[sesehuh]

Bored today, Canon down used cell cam.








http://www.dotphoto.com/Go.asp?l=boost918&P=chicks&AID=1040149&Show=Y

[Twiss]

Poser Shots:

http://i8.photobucket.com/albums/a42/clnahas/100_1948.jpg
http://i8.photobucket.com/albums/a42/clnahas/100_1947.jpg

[philly2crazy]

Rocking the mini FLEXONTHIS.com windshield decal :flipoff:
http://i14.photobucket.com/albums/a305/philly2crazy/FOTsmall.jpg

[jeepcrazy]

Here's a few pics of my new toy.

http://tinypic.com/ehm993.jpg
http://tinypic.com/ehmy9y.jpg

[JD Rios]

My junk, flipped the upper shock mounts over to lower the ride height, shoe lace limit straps in the front, and a little paint(already need more :mrgreen: )...

http://www.fototime.com/{AFF4096F-FA1A-4227-A3E9-BF4856A40E3E}/picture.JPG
http://www.fototime.com/{929C5CE0-C200-495B-B369-A8DF92149C38}/picture.JPG
http://www.fototime.com/{44D39DC5-30F2-4737-86B2-F7DEE843A315}/picture.JPG
http://www.fototime.com/{FDAC3E28-F5AD-497F-AF4B-B99B5E1A4945}/picture.JPG

[cherokee xj]

http://memimage.cardomain.net/member_images/12/web/2148000-2148999/2148090_8_full.jpg
Only mods so far are siping down the middle of the tires, paint, and reversed front tires. I need to paint the control arms. I have a short video but have no clue how to post it.
http://memimage.cardomain.net/member_images/12/web/2148000-2148999/2148090_5_full.jpg
My neighbor's YJ
http://memimage.cardomain.net/member_images/12/web/2148000-2148999/2148090_3_full.jpg

[jcd]

I finally managed to get some shots of my rig before the sun got away from me...

http://jdietz.com/crawler/2.jpg



http://jdietz.com/crawler/3.jpg

http://jdietz.com/crawler/4.jpg

[Crawl-N-Clod]

Here you go..... I was going to post the pics here but they where so big and I figured if you didn't want them that big you wouldnt have took them that size. I didnt edit them any so all the detail is still in them.

1 (http://www.mbone.rchomepage.com/images/1.JPG)
2 (http://www.mbone.rchomepage.com/images/2.JPG)
3 (http://www.mbone.rchomepage.com/images/3.JPG)
4 (http://www.mbone.rchomepage.com/images/4.JPG)
5 (http://www.mbone.rchomepage.com/images/5.JPG)
6 (http://www.mbone.rchomepage.com/images/6.JPG)

[camoTJ]

heres mine (the latest version)

http://i29.photobucket.com/albums/c269/camoTJ40/nylintdovewheel020.jpg
http://i29.photobucket.com/albums/c269/camoTJ40/nylintdovewheel013.jpg
http://i29.photobucket.com/albums/c269/camoTJ40/nylintdovewheel017.jpg

[flash_gordon]

Well, saw it, check it out, had to get one. Could not leave it stock. I can't get enough:mrgreen:
Fresh paint,no stickers yet....
http://i23.photobucket.com/albums/b360/subyshawn/DSCF0590.jpg

Rear spring mod....
http://i23.photobucket.com/albums/b360/subyshawn/DSCF0611.jpg

Checking the rear spring mods....
http://i23.photobucket.com/albums/b360/subyshawn/DSCF0601.jpg

Poser shot....
http://i23.photobucket.com/albums/b360/subyshawn/DSCF0605.jpg

Fun, fun, fun....
Shawn

[TEAMFX3]

My Wal-Mart warranteed crawler... Custom paint, custom cut and siped tires...



http://www.myonlineimages.com/Members/kimaaay/images/P1010225.JPG


http://www.myonlineimages.com/Members/kimaaay/images/P1010224.JPG

[tdjvolks]

Here is ours...



http://img.photobucket.com/albums/v434/tdjvolks/Thanksgiving05/Thanksgiving050031.jpg
http://img.photobucket.com/albums/v434/tdjvolks/Thanksgiving05/Thanksgiving050032.jpg
http://img.photobucket.com/albums/v434/tdjvolks/Thanksgiving05/Thanksgiving050033.jpg
http://img.photobucket.com/albums/v434/tdjvolks/Thanksgiving05/Thanksgiving050034.jpg
http://img.photobucket.com/albums/v434/tdjvolks/Thanksgiving05/Thanksgiving050035.jpg
http://img.photobucket.com/albums/v434/tdjvolks/Thanksgiving05/Thanksgiving050036.jpg
http://img.photobucket.com/albums/v434/tdjvolks/Thanksgiving05/Thanksgiving050037.jpg
http://img.photobucket.com/albums/v434/tdjvolks/Thanksgiving05/Thanksgiving050038.jpg

[swamped2a]

well heres my new 1/6 th nylint.. its pretty awesome compared to my 1/18!..
as soon as i got it out of the box i took it apart and painted it...i dont drive anything stock haha.. these are a few pics of it on my little 1/18 rock course..it dominated. more mods and pics to come!

http://i29.photobucket.com/albums/c260/88swampedmj/Picture090.jpg
http://i29.photobucket.com/albums/c260/88swampedmj/Picture088.jpg

[Bmr4life]

My Scorpion with upgraded chassis. Can't wait to get this thing into the backyard.

[MARGRETTE]

Here is mine, as of about an hour ago...still in the operating room, just taking a dinner break to let my fingers rest. Veteran of crawling, but newbie to r.c. Much harder to work on these things than the real ones, esp. with clumbsy fingers :oops:. Cut and bobbed tub, stretched w.b. upgraded to o-ring belts, switched the rear shocks to the front, and cut the new rears (coil and shafts) for more travel...still have to cut a bit more out. Rollcage and skid plates are in the works this week...I fried the electronics putting the chips back in. I hope to be back up and gittin' it as soon as I can get a new chassis sent out.

http://img343.imageshack.us/img343/9972/dscn08050dz.th.jpg (http://img343.imageshack.us/my.php?image=dscn08050dz.jpg)http://img429.imageshack.us/img429/3876/dscn08018jh.th.jpg (http://img429.imageshack.us/my.php?image=dscn08018jh.jpg)http://img429.imageshack.us/img429/7171/dscn07999df.th.jpg (http://img429.imageshack.us/my.php?image=dscn07999df.jpg)http://img530.imageshack.us/img530/931/dscn07928xd.th.jpg (http://img530.imageshack.us/my.php?image=dscn07928xd.jpg)

[jkoch88]

Specs...
1. Tri Color Paint
2. Stretched Wheel Base
3. Cut all Bump Stops out front and rear
4. Stretched springs
5. Relocated Rear Spring Mounts
6. Custom Skid Plates.
7. And a few other tricks :flipoff:

http://img466.imageshack.us/img466/9305/jeepstuffed9rh.jpg
http://img470.imageshack.us/img470/4025/jeep195wp.jpg
http://img470.imageshack.us/img470/8825/jeep183mg.jpg
http://img470.imageshack.us/img470/3999/jeep179wj.jpg
http://img7.imageshack.us/img7/2530/jeep142og.jpg
http://img7.imageshack.us/img7/5189/jeep133cq.jpg
http://img7.imageshack.us/img7/7452/jeep128zs.jpg
http://img7.imageshack.us/img7/9546/jeep112om.jpg


Now the Pictures do not Give the Color Justice....
If you look one way it is a dark green and the other way is Deep Purple:evil:

[RubiPaul]

My early xmas gift, tried to make it like my 1:1 wheeler
http://i13.photobucket.com/albums/a287/bigpaulbowski/108_0825.jpg
http://i13.photobucket.com/albums/a287/bigpaulbowski/108_0827.jpg

[logikfive]

Heres my new (stock) 1:6 Nylint Jeep:

http://logikfive.myfirebirdweb.com/gallery/albums/userpics/10001/normal_100_6602.JPG
http://logikfive.myfirebirdweb.com/gallery/albums/userpics/10001/normal_100_6605.JPG

[Rescue74]

Painted....not mods yet

http://photobucket.com/albums/b134/kg6dfh/PDR_1633.jpg

http://photobucket.com/albums/b134/kg6dfh/PDR_1634.jpg

http://photobucket.com/albums/b134/kg6dfh/PDR_1630.jpg

Posing with the 1:1

http://photobucket.com/albums/b134/kg6dfh/PDR_1628.jpg

Too bad its not a CJ

http://photobucket.com/albums/b134/kg6dfh/PDR_1627.jpg

[MT12]

http://homepage.mac.com/tmedic12/.Pictures/Photo%20Album%20Pictures/2005-12-20%2009.23.43%20-0800/Image-060809DC717D11DA.jpg


http://homepage.mac.com/tmedic12/.Pictures/Photo%20Album%20Pictures/2005-12-20%2009.23.43%20-0800/Image-06077905717D11DA.jpg

http://homepage.mac.com/tmedic12/.Pictures/Photo%20Album%20Pictures/2005-12-20%2009.23.43%20-0800/Image-0607CF80717D11DA.jpg


;-) MANY MODS AND CUSTOMS

[toylxl2]

go here to see mine stock and after my mods
http://photobucket.com/albums/d107/Toylxl2/?sc=1

[tommyboy]

http://www.tamiyaclub.com/getuserimage.asp?t=n&id=img10176_23122005151110_2.jpg

Tucked the tummy and replaced the belts added a lexan body I think she is ready.http://www.tamiyaclub.com/getuserimage.asp?t=n&id=img10176_30122005163251_1.jpg

[skerb]

dam i didnt realize white was color of the year...im going to have to repaint mine:flipoff:

http://www.usjeeps.com/members/p59-1135379401.jpg

[ColquittCustom405]

Mine is still in work......One trick winch is being fabricated as I speak.


http://img256.imageshack.us/img256/2909/mx1drivers1bz.jpg


http://img371.imageshack.us/img371/746/billybob4mf.jpg


http://img494.imageshack.us/img494/894/frontmxone1jo.jpg


http://img515.imageshack.us/img515/2494/wallbound5gj.jpg

[JD Rios]

Chassis #2, resprayed the body and since I broke one of the tail lights off I made some custom beer can corners...

http://www.fototime.com/{1D3E9AEC-B21A-4D53-9BFF-877B68E2F87A}/picture.JPG

[fastg60]

stock running gear so far... i can't decide how far to go with mods... i'm probably going to tummy tuck it and inboard the shocks for now, i may do a full custom chassis and 4-link with some savage shocks with super soft springs...

http://img221.imageshack.us/img221/9486/10001054qy.th.jpg (http://img221.imageshack.us/my.php?image=10001054qy.jpg)

[NevadaXJ]

Mine, still stock, paint to come....

http://www.leavethepavement.com/crawlin/crawlin2.jpg
http://www.leavethepavement.com/crawlin/crawlin3.jpg
http://www.leavethepavement.com/crawlin/crawlin4.jpg
http://www.leavethepavement.com/crawlin/crawlin5.jpg

Will be painted soon to match my real Cherokee
http://www.leavethepavement.com/moonrocks/moon06.jpg

[metal]

http://pg.photos.yahoo.com/ph/mawilliams23/detail?.dir=/eede&.dnm=770fre2.jpg&.src=ph
http://pg.photos.yahoo.com/ph/mawilliams23/detail?.dir=/eede&.dnm=6466re2.jpg&.src=ph
http://pg.photos.yahoo.com/ph/mawilliams23/detail?.dir=/eede&.dnm=5f90re2.jpg&.src=ph
http://pg.photos.yahoo.com/ph/mawilliams23/detail?.dir=/eede&.dnm=1377re2.jpg&.src=ph

Krylon Fusion and Automotive undercoating on the roll cage and skid plates. Moved the controller guages to the dash.:lol:

[Deviljeep]

http://pg.photos.yahoo.com/ph/mawilliams23/detail?.dir=/eede&.dnm=770fre2.jpg&.src=ph
http://pg.photos.yahoo.com/ph/mawilliams23/detail?.dir=/eede&.dnm=6466re2.jpg&.src=ph
http://pg.photos.yahoo.com/ph/mawilliams23/detail?.dir=/eede&.dnm=5f90re2.jpg&.src=ph
http://pg.photos.yahoo.com/ph/mawilliams23/detail?.dir=/eede&.dnm=1377re2.jpg&.src=ph

Moved the controller guages to the dash.:lol:



Me too...

http://i20.photobucket.com/albums/b233/Deviljeep/ProjectBLING032.jpg


:mrgreen:

[ColquittCustom405]

http://img321.imageshack.us/img321/9868/20av.jpg

Sniffin the rocks

[Jimbeaux]

I joined this Forum after I got my new 1:6. It wasn't long after Christmas Day that I had this thing disassembled and painted.
It's stock other than custom skid plates. I can't wait to try some of the other mods discussed on this forum.

This is MY Scorpion..:)

http://www.rccrawler.com/forum/attachment.php?attachmentid=7664&stc=1

And this is my daughters 1:18...after I "Girlied it up":roll:
http://www.rccrawler.com/forum/attachment.php?attachmentid=7663&stc=1

I've got more pics, crawlin if anyone is interested.

[toylxl2]

here ya go my build up lots of stuff done to my 1/6 and even more to come
I'm new to the rc world but not the 1:1 I love workin on this thing but dont have any wheelin buddys.Originaly from Az but in Eugene Or till feb then goin back home..this link takes you strait to my album check it out


http://photobucket.com/albums/d107/Toylxl2/?start=0


tummy tuck
LED lights;head,tail,and rock lights
lengthen wheel base 1 screw front and rear
1 1/2in lift
custom long travel shocks(just mock ups for now) build good ones later
custom paint
cut and turned tires
cut off body/frame tabes--limit straps
cut fenders
inboard front and rear shocks
more to come

[XJbv]

My buddy's in blue, mine in black.
http://photos-811.facebook.com/n9/7855/55/10215851/n10215851_30391811_8196.jpg

still waiting for my upgraded chasis, so I did a funked up repair with steel strap. The soft top is working really nice, no more paint scratches when I roll over!

here is my janky fix. It's ugly, but it'll do untill I get the updated version. Whycouldn't these have been made of metal to start with?
http://photos-813.facebook.com/n9/7855/55/10215851/n10215851_30401813_1268.jpg

more pics here (http://colorado.facebook.com/album.php?aid=2014431&l=2a957&id=10215851)

[engineerjoe]

heres my ynlint titan
i really like this forum - lots of info
http://img512.imageshack.us/img512/6013/rcsmall23jc.jpg







so far ive cut some small plastic tabs, cut the shock bodies, and of course the body to match my 1:1 frontier. its a little more scratched up now
http://img512.imageshack.us/img512/5889/rcsmall12cu.jpg

[99taco]

heres mine spec are

4 link rear
cut limiting tabs
stretched wheelbase to 18"
flipped tires
leds front and rear
next 4 link front:)
I know I need to get it in the bodyshop for some metal work and shoot it with paint.
I wanted it to climb the stairs in my house and it does it with style:mrgreen:

side shot
http://home.comcast.net/~shawnolsen1/wsb/media/311877/site1041.jpg

4 link setup
http://home.comcast.net/~shawnolsen1/wsb/media/311877/site1042.jpg

front leds
http://home.comcast.net/~shawnolsen1/wsb/media/311877/site1043.jpg

maxed out
http://home.comcast.net/~shawnolsen1/wsb/media/311877/site1044.jpg

stock
http://home.comcast.net/~shawnolsen1/wsb/media/311877/site1045.jpg

[Nylintjunkie]

http://img.photobucket.com/albums/v521/fd081703/26086ad2.jpg
http://img.photobucket.com/albums/v521/fd081703/Picture003.jpg
http://img.photobucket.com/albums/v521/fd081703/Picture002.jpg

[JeepinJ1990]

Here is my 1/6th Jeep. I have inboard rear shocks, trimmed front shocks, comp cut, and Custom Steel Rockers. 8-)

http://photos-232.facebook.com/n9/3735/76/39705745/n39705745_30110232_3683.jpg


Form and Function
http://photos-240.facebook.com/n9/3735/76/39705745/n39705745_30110240_4729.jpg



The reason for the comp cut
http://photos-237.facebook.com/n9/3735/76/39705745/n39705745_30110237_4752.jpg

[run2jeepn]

Pic's of mine. Not done yet. Updated pic's of (Don't know a Name yet )
http://memimage.cardomain.net/member_images/5/web/2213000-2213999/2213571_1_full.jpg
http://memimage.cardomain.net/member_images/5/web/2213000-2213999/2213571_2_full.jpg
http://memimage.cardomain.net/member_images/5/web/2213000-2213999/2213571_5_full.jpg
http://memimage.cardomain.net/member_images/5/web/2213000-2213999/2213571_6_full.jpg
More pic's in my thread. And the lastest updates.

[mikeg576]

http://mikegardner.myphotoalbum.com/view_photo.php?full=1&set_albumName=album14&id=Picture_012_jpg
http://mikegardner.myphotoalbum.com/view_photo.php?full=1&set_albumName=album14&id=Picture_020_jpg
http://mikegardner.myphotoalbum.com/view_photo.php?full=1&set_albumName=album14&id=Picture_023_jpg
just did the cage today at work. it is 1/8th inch pencil rod. i'll bolt it in w/ supports and also finish the frame and front / rear bumpers. if pic doesn't show up you can see it at www.mikegardner.myphotoalbum.com (http://www.mikegardner.myphotoalbum.com/)

[boomhauer]

Here are a couple of poser pics for ya! BTW this site rules lots of great info!

Bill

[Snow]

pics of both of mine and a friends



http://tinypic.com/k51kat.jpg


http://tinypic.com/k51if7.jpg


http://tinypic.com/k51h5k.jpg

[The Lyin' King]

Here's mine with new paint . . . .


http://i26.photobucket.com/albums/c127/TheLyinKing1/NylintArticluatedLivingRoom.jpg

http://i26.photobucket.com/albums/c127/TheLyinKing1/NylintArticluatedLivingRoom.jpg

[Off_Road_Ram_01]

Here's mine - nothing fancy yet, but slowly working on mods:

http://www.offroadworld.net/gallery/OffRoadRam01/144108.jpg

http://www.offroadworld.net/gallery/OffRoadRam01/144252.jpg

[ford381stroker]

Here is the updated pic of the jeep


http://xs64.xs.to/pics/06030/fortheinternet25.JPG (http://xs.to)

[Snow]

here is my new scorp with extended rear relocated shocks and still thinking about tummy tuck


http://tinypic.com/k9xef5.jpg



http://tinypic.com/k9xcso.jpg

[forwheelin49]

heres mine pretty much stock except for relocated springs in rear and soon I will do a ut paint scheme white and orange with the logo on the hood

Before:
http://memimage.cardomain.net/member_images/1/web/181000-181999/181986_107_full.jpg
After:
http://memimage.cardomain.net/member_images/1/web/181000-181999/181986_108_full.jpg

[Branman444]

http://img65.imageshack.us/img65/856/jeeppainted00012ps.jpg
http://img65.imageshack.us/img65/5631/jeeppainted00022gg.jpg
http://img65.imageshack.us/img65/6450/jeeppainted00038mq.jpg
http://img65.imageshack.us/img65/7196/jeeppainted00045fu.jpg
http://img65.imageshack.us/img65/1401/jeeppainted00074ea.jpg

[shawnf6]

lets see if this works.... it is a shot of my willy's nylint with claw max tires off an e maxx...it has led lights -front and back a roll cage in the works and a winch that will actualy lift the truck no problem....these tires are for the snow and ice and they do well at keeping it on top...
http://img57.imageshack.us/img57/3966/5234670r203214a7xd.jpg



http://img57.imageshack.us/img57/7720/5234670r203415a2qt.jpg

http://img82.imageshack.us/img82/3963/5234670r202812aedited8vy.jpg

[Cricket301]

http://i18.photobucket.com/albums/b124/Cricket301/NylintCrawler012.jpgand yes, the wheels are cracked too!http://i18.photobucket.com/albums/b124/Cricket301/NylintCrawler008.jpg

[Dr. Jones]

Tummy Tuck, inboard shocks, lights and a few other details

http://i38.photobucket.com/albums/e126/Detjenn/1ed85f50.jpg


http://i38.photobucket.com/albums/e126/Detjenn/a295f7b7.jpg
http://i38.photobucket.com/albums/e126/Detjenn/GraniteDells001.jpg
http://i38.photobucket.com/albums/e126/Detjenn/GraniteDells018.jpg
my rocks are better than yours :flipoff:

[supazuk]

I took out the dremel and this is what happened
http://69.95.44.61/forums/uploads/1136132713/med_gallery_67_26_437574.jpg
http://69.95.44.61/forums/uploads/1136132713/med_gallery_67_26_376318.jpg
http://69.95.44.61/forums/uploads/1136132713/med_gallery_67_26_419569.jpg
http://69.95.44.61/forums/uploads/1136132713/med_gallery_67_26_485964.jpg
http://69.95.44.61/forums/uploads/1136132713/med_gallery_67_26_387977.jpg
http://69.95.44.61/forums/uploads/1136132713/med_gallery_67_26_135095.jpg
http://69.95.44.61/forums/uploads/1136132713/med_gallery_67_26_388920.jpg

I extended the wheel base inboarded the coils comp cut and dovetailed the body
I'm doing a tummy tuck next and making formed rock rails..
I wish it was as cheap and easy to do all this on my 1:1 rig

[1MUTCJ7]

Alright, I finally took some pics of the rock course I made along side my house.

[Optiskate]

http://i1.tinypic.com/mr4klx.jpg
Timbercrawl'n with the Nylint...:flipoff:

http://i1.tinypic.com/mr48qa.jpg

http://i1.tinypic.com/mr4baf.jpg

http://i1.tinypic.com/mr4e90.jpg


No mods as of yet, but I do want to flat skid it, stretch the front, and inboard the rear shocks.

[jeepercreeper]

http://homepage.mac.com/tmedic12/.Pictures/Photo%20Album%20Pictures/2005-12-20%2009.23.43%20-0800/Image-060809DC717D11DA.jpg


http://homepage.mac.com/tmedic12/.Pictures/Photo%20Album%20Pictures/2005-12-20%2009.23.43%20-0800/Image-06077905717D11DA.jpg

http://homepage.mac.com/tmedic12/.Pictures/Photo%20Album%20Pictures/2005-12-20%2009.23.43%20-0800/Image-0607CF80717D11DA.jpg


;-) MANY MODS AND CUSTOMS where did you get the fire extinguisher and onbord air

[justin]

just click on the link it should work justinkfh photo album - Photobucket.com (http://photobucket.com/albums/e172/justinkfh/)

[Pantera]

Heres a few of my roomate and I's rigs -





http://www.thesopclan.com/nylint/Crawlin1.JPG
http://www.thesopclan.com/nylint/crawlin2.JPG
http://www.thesopclan.com/nylint/crawlin3.JPG
http://www.thesopclan.com/nylint/crawlin4.JPG

[rodolo]

mine unmodded but soon


http://i5.photobucket.com/albums/y181/rodolo/JEEP1.jpg

http://i5.photobucket.com/albums/y181/rodolo/JEEP-12.jpg


http://i5.photobucket.com/albums/y181/rodolo/JEEP-02.jpg

[Deviljeep]

Added flames.


http://i20.photobucket.com/albums/b233/Deviljeep/ProjectBLING039.jpg

http://i20.photobucket.com/albums/b233/Deviljeep/ProjectBLING037.jpg

[xX-JACKEL-Xx]

http://img420.imageshack.us/gal.php?g=nylintrccrawler0067gc.jpgI haven't seen anyone with the shocks removed so i thought i would show u mine. please check the linkhttp://img137.imageshack.us/img137/7350/nylintrccrawler0037xg.jpg

[Dr. Jones]

http://i38.photobucket.com/albums/e126/Detjenn/40600144.jpg

http://i38.photobucket.com/albums/e126/Detjenn/40600160.jpg

http://i38.photobucket.com/albums/e126/Detjenn/40600173.jpg

[Chuki]

Bone stock Gen 3 (upgraded chassis) Scorpion... It's stock until I finish my Jeep
http://img19.imageshack.us/img19/7375/poser010sf.jpg

My Jeep
http://img19.imageshack.us/img19/7623/poser027kn.jpg

In this Pic my Jeep just has some rear suspension work done, In the process of tummy tuckin and paint.
Just posted this cause mine aren't up here yet, and I thought the Jeep pic looked cool.

[xjay96]

http://img.photobucket.com/albums/v18/JeepXJ3/Nylint/IMG_1506.jpg
IRON CITY BABY Yeah thats righ Steelers Kick A$$:flipoff:

http://img.photobucket.com/albums/v18/JeepXJ3/Nylint/IMG_1507.jpg

http://img.photobucket.com/albums/v18/JeepXJ3/Nylint/IMG_1508.jpg

http://img.photobucket.com/albums/v18/JeepXJ3/Nylint/IMG_1509.jpg

http://img.photobucket.com/albums/v18/JeepXJ3/Nylint/IMG_1514.jpg

http://img.photobucket.com/albums/v18/JeepXJ3/Nylint/IMG_1513.jpg

http://img.photobucket.com/albums/v18/JeepXJ3/Nylint/IMG_1515.jpg

http://img.photobucket.com/albums/v18/JeepXJ3/Nylint/IMG_1516.jpg

Just a couple of Pics.

Mods done so far:
LED's Front and rear
New Softer Coils all 4 corners
Inboard Rear shock mounts
Cut Rear shocks down to get more flex
Reverse Cut Tires
Narrowed Tires
Streached Chassis

[mudslinger74]

just painted it 2 days agohttp://http://img280.imageshack.us/img280/5407/jasoncrawler18ns.jpg
http://http://img52.imageshack.us/img52/276/jasoncrawler37zm.jpg
http://http://img527.imageshack.us/img527/6271/jasoncrawler26aa.jpg


http://img280.imageshack.us/img280/5407/jasoncrawler18ns.jpg[/IMG]"] ("http://[IMG)

[BigRedB2]

I posted a new thread for these pic already, forgot about this thread, sorry..here they are again.

http://img.photobucket.com/albums/v463/bigredb2/NYLINT/3e1291f3.jpg

http://img.photobucket.com/albums/v463/bigredb2/NYLINT/bd5ee87d.jpg

http://img.photobucket.com/albums/v463/bigredb2/NYLINT/6c4ab11b.jpg

[AJL]

This thing is a blast! Wheeled it hard and so far, only casualties are a cracked rear skid plate (want to replace the skids with metal anyways) and a bent tie-rod.


http://static.flickr.com/41/99024173_232b47aeb4.jpg
http://static.flickr.com/39/99024178_f0a4a80570.jpg (http://static.flickr.com/39/99024178_f0a4a80570.jpg?v=0)
http://static.flickr.com/39/99024184_4a4f3c6639.jpg (http://static.flickr.com/39/99024184_4a4f3c6639.jpg?v=0)
http://static.flickr.com/26/99029390_2ef161c960.jpg (http://static.flickr.com/26/99029390_2ef161c960.jpg?v=0)
http://static.flickr.com/39/99026782_caf014a99e.jpg (http://static.flickr.com/39/99026782_caf014a99e.jpg?v=0)
http://static.flickr.com/21/99026779_3e49f2a4d8.jpg (http://static.flickr.com/21/99026779_3e49f2a4d8.jpg?v=0)

[Snow]

a buddy of mine wanted me to post some pics of his crawlers
sweet paint i think


http://i1.tinypic.com/np2af7.jpg
http://i1.tinypic.com/np29zr.jpg

[Swamp Donkey]

Just got my 1:6 the other day.

Mods include, but not seen yet
-stickers removed
-belt mod to front axle
-reversed tires
http://www.supermotors.org/getfile/291358/fullsize/1.6%20scale%20crawler%20002.jpg

I want to keep this one simple. I wheeled it pretty damn good today and think it really only needs a tummy tuck and some axle skids and rocker skids, and some tire cutting.

The rear axle will stop moving under a hard load. Is this the belt slipping?

[_Natchez_]

Straight off the Walmart Shelve , I picked it up for $89.99 and you can see how my afternoon went.

http://img.photobucket.com/albums/v415/SloSubie/RC%20CRAWLERS/DSC_1432.jpg
first step was to lengthen the wires and stretch the Front and Rear
http://img.photobucket.com/albums/v415/SloSubie/RC%20CRAWLERS/DSC_1390.jpg
I noticed that on complete compression the belly hit the control arms so I notched them..


http://img.photobucket.com/albums/v415/SloSubie/RC%20CRAWLERS/DSC_1458.jpg

my factory component shock relocation
http://img.photobucket.com/albums/v415/SloSubie/RC%20CRAWLERS/DSC_1463.jpg

waiting for the paint to dry
http://img.photobucket.com/albums/v415/SloSubie/RC%20CRAWLERS/DSC_1449.jpg

[SNOWTOYOTA]

Well here's mine. most common mods,Tummy tuck, Dove tail, Inboard shocks, Longer wheelbase front and rear, reversed and cut tires, Paintchopped up body. Tell me what you think.:mrgreen:http://photobucket.com/albums/f379/tswalla/th_IM000563.jpg (http://photobucket.com/albums/f379/tswalla/?action=view&current=IM000563.jpg)
http://photobucket.com/albums/f379/tswalla/th_IM000564.jpg (http://photobucket.com/albums/f379/tswalla/?action=view&current=IM000564.jpg)http://photobucket.com/albums/f379/tswalla/th_IM000561.jpg (http://photobucket.com/albums/f379/tswalla/?action=view&current=IM000561.jpg)http://photobucket.com/albums/f379/tswalla/th_IM000561a.jpg (http://photobucket.com/albums/f379/tswalla/?action=view&current=IM000561a.jpg)

[Chuki]

Someone got some sand in there vagina... y'know if we don't get that out you could become a walking time bomb.


Seriously, all I said to you was that you could post more then 1 pic per post... I see like 15 new posts to this thread, so I'm thinkin sweet!!! Quite a few new nylints, well it was just one.

Then I see another user posting how he did all his mods which is cool and all but this is not that thread.

To keep this thread on topic...


Just about done painting, but I got it to the point where I can drive my Scorpion crawler aound with the body on ;-)

http://img142.imageshack.us/img142/6638/mod296gd.jpg

Some interior shots
http://img444.imageshack.us/img444/7530/mod303kr.jpg

http://img149.imageshack.us/img149/2508/mod314fa.jpg

http://img149.imageshack.us/img149/6079/mod323jf.jpg

Here it is about 90% done, I just gotta do the front headlight portion and the rear portion, and the mirrors.

[bmf24]

http://i48.photobucket.com/albums/f234/bmf24/RC/DSCN1728.jpg

http://i48.photobucket.com/albums/f234/bmf24/RC/DSCN1726.jpg

http://i48.photobucket.com/albums/f234/bmf24/RC/DSCN1729.jpg

http://i48.photobucket.com/albums/f234/bmf24/RC/DSCN1736.jpg

[rock_my_wrench]

i have a camilon paint it changes copper purple and green but it is very hard to take pics of the change i have inverted shocks cut all tabs trimmed under the wishbone on the axle put straps on the shocks turned my tires around
http://i42.photobucket.com/albums/e306/daylight11/crawler/rockcrawler001.jpg

http://i42.photobucket.com/albums/e306/daylight11/crawler/rockcrawler002.jpg

http://i42.photobucket.com/albums/e306/daylight11/crawler/rockcrawler003.jpg

http://i42.photobucket.com/albums/e306/daylight11/crawler/rockcrawler004.jpg

http://i42.photobucket.com/albums/e306/daylight11/crawler/rockcrawler005.jpg

http://i42.photobucket.com/albums/e306/daylight11/crawler/rockcrawler006.jpg

http://i42.photobucket.com/albums/e306/daylight11/crawler/rockcrawler007.jpg

http://i42.photobucket.com/albums/e306/daylight11/crawler/rockcrawler008.jpg

this last one is my tt
http://i42.photobucket.com/albums/e306/daylight11/crawler/rockcrawler1.jpg

[shawnf6]

here is some pics more to come
http://img159.imageshack.us/my.php?image=winchedited4dl.jpg

http://img110.imageshack.us/img110/8009/fronticetires0bj.jpg

http://img111.imageshack.us/img111/9206/fronticetires6oi.jpg

[Greg_Volkman]

Just got my heep - this was the first run this morning:

Entering a canyon:
http://i1.tinypic.com/oj3rr7.jpg
The second obsticle:
http://i1.tinypic.com/oj3sds.jpg
exiting the canyon (wheel stand):
http://i1.tinypic.com/oj3uxv.jpg
Ouch, flopped it on it's side!:
http://i1.tinypic.com/oj3vhv.jpg

[MadMaxima]

so far i've just repainted it, i wanna try it out stock to compare after some mods. Its sitting next to its little brother, the green one in the back has working head and tail lights too.

http://i46.photobucket.com/albums/f143/MadMaxima/bigandlittle.jpg

i was hesitant about the tan and brown but i think it came out beautifully

[MilesToEmpty]

Here's my Jeep I got before Xmas... still havent received my replacement chassis ><
http://static.flickr.com/54/108584148_70e4ed7c5d.jpg
http://static.flickr.com/44/108584151_29e3db64cc.jpg
http://static.flickr.com/56/108584153_44644abc31.jpg
http://static.flickr.com/38/108584154_a59c4dd442.jpg

Here's my Scorpion which I got last week in February... Now I have one for me and my girlfriend.
http://static.flickr.com/50/108584932_f1f1571268.jpg
http://static.flickr.com/46/108584933_5220ed3f01.jpg
http://static.flickr.com/55/108584934_d9dfe04b98.jpg
http://static.flickr.com/35/108584935_016edc110c.jpg
http://static.flickr.com/41/108584936_403c855757.jpg

[nfan04]

This is the current condition. In progress of adding skid plates and some other minor detailing. Any one with suggestions send them my way.


http://www.crawler.zoomshare.com/album/My%20Nylint%20Crawler/images/4cdd16587ad3ae37f1da48eb8962a990_11417782680/thumb.jpg (http://www.crawler.zoomshare.com/album/My%20Nylint%20Crawler/images/4cdd16587ad3ae37f1da48eb8962a990_11417782680/:album)http://www.crawler.zoomshare.com/album/My%20Nylint%20Crawler/images/c1e783e89a484f7777517f0b4eec0050_11417778370/thumb.jpg (http://www.crawler.zoomshare.com/album/My%20Nylint%20Crawler/images/c1e783e89a484f7777517f0b4eec0050_11417778370/:album)
[/url]
[url="http://www.crawler.zoomshare.com/album/My%20Nylint%20Crawler/images/d661668b9b2db09d744ad09cdc2c30d0_11417777120/:album"]http://www.crawler.zoomshare.com/album/My%20Nylint%20Crawler/images/d661668b9b2db09d744ad09cdc2c30d0_11417777120/thumb.jpg (http://www.crawler.zoomshare.com/album/My%20Nylint%20Crawler/images/c1e783e89a484f7777517f0b4eec0050_11417778370/:album)
http://www.crawler.zoomshare.com/album/My%20Nylint%20Crawler/images/e9da13d68b95ea6c677edb4fe0812ea2_11417775150/thumb.jpg (http://www.crawler.zoomshare.com/album/My%20Nylint%20Crawler/images/e9da13d68b95ea6c677edb4fe0812ea2_11417775150/:album)
http://www.crawler.zoomshare.com/album/My%20Nylint%20Crawler/images/9d7958e9d59f2a27af11c50e9e6772eb_11416968840/thumb.jpg (http://www.crawler.zoomshare.com/album/My%20Nylint%20Crawler/images/9d7958e9d59f2a27af11c50e9e6772eb_11416968840/:album)
http://www.crawler.zoomshare.com/album/My%20Nylint%20Crawler/images/2203ef36a254cef852401943cabfbcc4_11416967940/thumb.jpg (http://www.crawler.zoomshare.com/album/My%20Nylint%20Crawler/images/2203ef36a254cef852401943cabfbcc4_11416967940/:album)
http://www.crawler.zoomshare.com/album/My%20Nylint%20Crawler/images/9f9943711fc5f9b8f606d38a07f51dad_11416967020/thumb.jpg (http://www.crawler.zoomshare.com/album/My%20Nylint%20Crawler/images/9f9943711fc5f9b8f606d38a07f51dad_11416967020/:album)
http://www.crawler.zoomshare.com/album/My%20Nylint%20Crawler/images/6b2de46d09d8a6dc617630d42c7f1145_11416965090/thumb.jpg (http://www.crawler.zoomshare.com/album/My%20Nylint%20Crawler/images/6b2de46d09d8a6dc617630d42c7f1145_11416965090/:album)
http://www.crawler.zoomshare.com/album/My%20Nylint%20Crawler/images/b4252fd51534bb920eb09ba6d0a98cdf_11416964420/thumb.jpg (http://www.crawler.zoomshare.com/album/My%20Nylint%20Crawler/images/b4252fd51534bb920eb09ba6d0a98cdf_11416964420/:album)
http://www.crawler.zoomshare.com/album/My%20Nylint%20Crawler/images/efd0bbe47fe1db45126b80e1024e3edd_11416961360/thumb.jpg (http://www.crawler.zoomshare.com/album/My%20Nylint%20Crawler/images/efd0bbe47fe1db45126b80e1024e3edd_11416961360/:album)

[westbound808]

http://i51.photobucket.com/albums/f359/westbound808/DSC00084.jpg

http://i51.photobucket.com/albums/f359/westbound808/DSC00154.jpg

jeep pictures
http://i51.photobucket.com/albums/f359/westbound808/DSC00148.jpg

http://i51.photobucket.com/albums/f359/westbound808/c75e5c1e.jpg

[rc180]

I converted my RC Crawler to a Bronco by using the body off of a WalMart sale Special. The original Jeep body was butchered to provide support for the new body. The lights operate on an independent battery salvaged from the WalMart Bronco. The three lights on the front are Ram RC lights mounted on a stick made from an old bath towel bar. I am also working on wheel adapters for Kong Swamper tires.

Thanks for the help and advice on posting pictures. Someday when I get better at using the bulliten board, I will learn how to properly reply to mail.

http://img97.imageshack.us/img97/1666/pict378916dr.jpg

http://img78.imageshack.us/img78/5199/pict378816dg.jpg

http://img78.imageshack.us/img78/2456/pict378710bi.jpg

http://img78.imageshack.us/img78/2525/pict378612ol.jpg

http://img78.imageshack.us/img78/323/pict378510bg.jpg

http://img78.imageshack.us/img78/6746/pict378316op.jpg

http://img78.imageshack.us/img78/2811/pict378217ld.jpg

http://img78.imageshack.us/img78/4117/pict378113re.jpg

[Wing Nut OOA]

well here she is...


just got it last night, battery is still charging. all i've done is take the plastic inserts
out of the tires. not sure how thats gonna work, may end up putting them back in

anyone know where i can get a 1/6 cherokee body?


http://www.geocities.com/wingnutooa/RC1.jpg


http://www.geocities.com/wingnutooa/RC2.jpg


http://www.geocities.com/wingnutooa/RC3.jpg


http://www.geocities.com/wingnutooa/RC4.jpg


http://www.geocities.com/wingnutooa/RC5.jpg

[TwistedXT]

http://i18.photobucket.com/albums/b102/TwistedXT/Nylint/DCP_1147.jpg

http://i18.photobucket.com/albums/b102/TwistedXT/Nylint/DCP_1149.jpg

http://i18.photobucket.com/albums/b102/TwistedXT/Nylint/DCP_1151.jpg

http://i18.photobucket.com/albums/b102/TwistedXT/Nylint/dcp_1172.jpg

http://i18.photobucket.com/albums/b102/TwistedXT/Nylint/DCP_1180.jpg

[_Natchez_]

REAR STEER

http://img.photobucket.com/albums/v415/SloSubie/RC%20CRAWLERS/DSC_2198.jpg
http://img.photobucket.com/albums/v415/SloSubie/RC%20CRAWLERS/DSC_2180.jpg
http://img.photobucket.com/albums/v415/SloSubie/RC%20CRAWLERS/DSC_2155.jpg
http://img.photobucket.com/albums/v415/SloSubie/RC%20CRAWLERS/DSC_2144.jpg
http://img.photobucket.com/albums/v415/SloSubie/RC%20CRAWLERS/DSC_2141.jpg
http://img.photobucket.com/albums/v415/SloSubie/RC%20CRAWLERS/DSC_2131copy.jpg
http://img.photobucket.com/albums/v415/SloSubie/RC%20CRAWLERS/DSC_2129.jpg

[miller]

There's some cool rigs here. This is my contribution to Toyota fans like myself.


http://img.photobucket.com/albums/v230/millerjouni/RCWheeler/crawlfront.jpg

http://img.photobucket.com/albums/v230/millerjouni/RCWheeler/crawlside.jpg

http://img.photobucket.com/albums/v230/millerjouni/RCWheeler/crawlback.jpg

Build Thread here:

http://www.rccrawler.com/forum/showthread.php?t=23107

[drumfreak77]

Lookin for some one to crawl with.
One modified, one stock for now.
www.rcpics.net/member/drumfreak77 (http://www.rcpics.net/member/drumfreak77)

[TheRumbleFish]

Here's my Jeep. I've got a Scorpion too but haven't opened it and I'm thikning about selling it since I don't think I need it.

So far the only mods I've done are a paint job and reversed tires with trimmed lugs.

http://i4.photobucket.com/albums/y112/TheRumbleFish/RC%20Crawlers/crawler2.jpg

[kawicrazed_125_05]

Here is just a few pics of my rig that i thought i would throw in the gallery

http://i74.photobucket.com/albums/i242/kawicrazed_125_05/rc%20crawler/b9ce5689.jpg

http://i74.photobucket.com/albums/i242/kawicrazed_125_05/rc%20crawler/b8a5eba0.jpg

http://i74.photobucket.com/albums/i242/kawicrazed_125_05/rc%20crawler/508ef8ae.jpg

[Wrecker]

http://i50.photobucket.com/albums/f317/4xcrawler/IMG00006.jpg
http://i50.photobucket.com/albums/f317/4xcrawler/IMG00007.jpg
http://i50.photobucket.com/albums/f317/4xcrawler/IMG00009.jpg
http://i50.photobucket.com/albums/f317/4xcrawler/IMG00003.jpg
http://i50.photobucket.com/albums/f317/4xcrawler/IMG00005.jpg

[JEEPTJ]

Mods:
Paint
Triangulated shocks front and rear
Flipped and cut tires

Future Mods:
Tummy tuck
Some fabrication like metal rocker panels/ skids


http://i78.photobucket.com/albums/j106/recover1227/S40200242.jpg

http://i78.photobucket.com/albums/j106/recover1227/S40200252.jpg
http://i78.photobucket.com/albums/j106/recover1227/S40200262.jpg

[JEEPTJ]

the smaller one is a friends


http://i78.photobucket.com/albums/j106/recover1227/S40200282.jpg
http://i78.photobucket.com/albums/j106/recover1227/S40200312.jpg

http://i78.photobucket.com/albums/j106/recover1227/S40200332.jpg
http://i78.photobucket.com/albums/j106/recover1227/S40200352.jpg
http://i78.photobucket.com/albums/j106/recover1227/S40200362.jpg
http://i78.photobucket.com/albums/j106/recover1227/S40200382.jpg
Above: this was the only one posed.
http://i78.photobucket.com/albums/j106/recover1227/S40200392.jpg
http://i78.photobucket.com/albums/j106/recover1227/S40200402.jpg

[Icebreaker88]

One is mine the other is for my 2 boys (probably gonna get the younger one his own too).
My mods so far are TT, Extended WB, Relocated the shocks, cut & reversed tires. I want to cut and trim the axles but have not got that far yet. And will be painting and doing some body work soon.


This is the newly built rock garden the wife built for us in the backyard to keep us out of her flower bed. (hey they had nice ledges).

http://www.supermotors.org/getfile/314801/fullsize/Picture%20089.jpg
http://www.supermotors.org/getfile/314802/fullsize/Picture%20091.jpg
http://www.supermotors.org/getfile/314803/fullsize/Picture%20092.jpg
http://www.supermotors.org/getfile/314804/fullsize/Picture%20093.jpg
http://www.supermotors.org/getfile/314805/fullsize/Picture%20096.jpg

[bigcat280]

Mt 1st 1:6. Just paint done for now. More mods to come.

http://i71.photobucket.com/albums/i145/bigcat280/d_crawler1.jpg
http://i71.photobucket.com/albums/i145/bigcat280/d_crawler2.jpg
http://i71.photobucket.com/albums/i145/bigcat280/d_crawler3.jpg

[bigcat280]

A buddy of mine wanted me to post his 1:6 up. All he has done is put an Avalanche body on it. He is planning on doing a tummy tuck on it tonight, so I will have more pics soon.

http://i71.photobucket.com/albums/i145/bigcat280/j_crawler1.jpg

[STANG KILLA SS]

just finished painting and re assembling her last night.

i painted the:
hood
rear deck
windsheild surround
center console
gauges
shifters
seats
belts
buckles
headlights
turnsignals
steering wheel
wheels
and wheel "bolts"

took some vids on my digi. only had a 128M card and it only takes like 20 seconds max. but i got a few on the card. i went easy on the obsticals cause i didnt want to get caught getting stuck on camera :D so its some easy crawlin. but cool none the less :D
i think u can choose "origonal" size to get a better vid..
well i only have room to host 2 of the vids :(
http://media.putfile.com/NYLINT-1
http://media.putfile.com/nylint-2




http://img49.imageshack.us/img49/4151/backyard4lg.jpg

http://img380.imageshack.us/img380/173/wheels7ls.jpg

http://img192.imageshack.us/img192/2683/interior5ok.jpg



next i triangulated the rear shocks and ground all the limiting tabs front and rear and clearanced the arms....(rotozip bit in the dremel made this MUUUCH easier...)

http://img380.imageshack.us/img380/6651/shocksandtabs3eu.jpg





then it was time to scratch her up and get her dirty!!!

http://img178.imageshack.us/img178/7817/rockpile18ht.jpg


http://img380.imageshack.us/img380/2300/conctrench15hk.jpg

http://img380.imageshack.us/img380/6018/conctrench38cs.jpg


http://img178.imageshack.us/img178/292/clay14pt.jpg

http://img380.imageshack.us/img380/6683/clay23nm.jpg


http://img380.imageshack.us/img380/8435/clay30bz.jpg

http://img380.imageshack.us/img380/8618/dirtpile18cx.jpg

http://img178.imageshack.us/img178/1503/dirtpile28gt.jpg

http://img178.imageshack.us/img178/6660/dirtpile38zu.jpg

http://img380.imageshack.us/img380/7746/dirtpile48tz.jpg

http://img178.imageshack.us/img178/4138/gotrimtree0om.jpg

http://img380.imageshack.us/img380/8640/hill19mh.jpg

http://img380.imageshack.us/img380/3005/stream18nj.jpg

http://img178.imageshack.us/img178/1534/stream27ur.jpg

http://img380.imageshack.us/img380/6770/stream32fi.jpg

[Monkeyboy]

slightly modded here are some backyard trail pics.

http://beer.thisdysfunctional.org/~monkeyboy/Nylint/Nylint/Nylint7.jpg

http://beer.thisdysfunctional.org/~monkeyboy/Nylint/Nylint/Nylint8.jpg

http://beer.thisdysfunctional.org/~monkeyboy/Nylint/Nylint/Nylint9.jpg

[4TACXOMA4]

Here's mine.

http://img.photobucket.com/albums/v336/4tacxoma4/nylintflex.jpg

http://img.photobucket.com/albums/v336/4tacxoma4/nylintlights.jpg

[xjbubba]

Here's my buddy Joe next to his now bling free rims. Well at least Chrome free rims:

http://img.photobucket.com/albums/v59/cjbubba/100_1252.jpg

He is going to go and and take a drive this afternoon when my son comes home.

[Mudinyeri]

Tummy tucked 1:6 with a comp cut, flat fendered 1:10 HPI Rubicon body.

http://i6.photobucket.com/albums/y221/Mudinyeri/RC%20Rock%20Crawler/042806_17161.jpg

No action shots yet; letting the paint dry.

[OK Krawler]

Heres something that can be done to a 1/6 Nylint :mrgreen:

http://s54.photobucket.com/albums/g81/OKKrawler/th_100_0845.jpg (http://s54.photobucket.com/albums/g81/OKKrawler/?action=view&current=100_0845.jpg) http://s54.photobucket.com/albums/g81/OKKrawler/th_IM000088.jpg (http://s54.photobucket.com/albums/g81/OKKrawler/?action=view&current=IM000088.jpg)http://s54.photobucket.com/albums/g81/OKKrawler/th_100_0849.jpg (http://s54.photobucket.com/albums/g81/OKKrawler/?action=view&current=100_0849.jpg)

http://s54.photobucket.com/albums/g81/OKKrawler/th_100_0833.jpg (http://s54.photobucket.com/albums/g81/OKKrawler/?action=view&current=100_0833.jpg) http://s54.photobucket.com/albums/g81/OKKrawler/th_100_0835.jpg (http://s54.photobucket.com/albums/g81/OKKrawler/?action=view&current=100_0835.jpg) http://s54.photobucket.com/albums/g81/OKKrawler/th_100_0839.jpg (http://s54.photobucket.com/albums/g81/OKKrawler/?action=view&current=100_0839.jpg)

http://s54.photobucket.com/albums/g81/OKKrawler/th_IM000087.jpg (http://s54.photobucket.com/albums/g81/OKKrawler/?action=view&current=IM000087.jpg)

[Identity_Crisis]

minor frame stretch, inverted tirres custom steel skid plates they sound so much better over rocks.soon to be FF batt. tummy tuck and narrowed tires.painted springs,passenger seat delete and step bars removed
http://memimage.cardomain.net/member_images/4/web/436000-436999/436832_557_full.jpg
http://memimage.cardomain.net/member_images/4/web/436000-436999/436832_558_full.jpg
http://memimage.cardomain.net/member_images/4/web/436000-436999/436832_555_full.jpg
http://memimage.cardomain.net/member_images/4/web/436000-436999/436832_553_full.jpg
http://memimage.cardomain.net/member_images/4/web/436000-436999/436832_544_full.jpg
http://memimage.cardomain.net/member_images/4/web/436000-436999/436832_552_full.jpg
http://memimage.cardomain.net/member_images/4/web/436000-436999/436832_554_full.jpg

[Jeepernick]

All the pix there
http://home.comcast.net/~nickbaldwin/RC%20RockCrawler/index.html (http://home.comcast.net/%7Enickbaldwin/RC%20RockCrawler/index.html)

http://home.comcast.net/~nickbaldwin/RC%20RockCrawler/Crawlin%60/100_2605.jpg

[lil_mule]

http://img484.imageshack.us/img484/7440/mvc593x9nd.jpghttp://img116.imageshack.us/img116/6830/mvc591x8yl.jpghttp://img379.imageshack.us/img379/3571/mvc590x1yl.jpghttp://img116.imageshack.us/img116/3184/mvc589x5nm.jpghttp://img379.imageshack.us/img379/8708/mvc587x4ga.jpg

[hman1991]

heres mine all stock for now.

http://i7.photobucket.com/albums/y278/hman1991/rc%20crawler/PICT1745.jpg

http://i7.photobucket.com/albums/y278/hman1991/rc%20crawler/PICT1746.jpg

http://i7.photobucket.com/albums/y278/hman1991/rc%20crawler/PICT1748.jpg

[buns78]

Pics Baby!!!!

http://i83.photobucket.com/albums/j319/buns78/2006-04-14027.jpg





http://i83.photobucket.com/albums/j319/buns78/2006-04-14005.jpg

http://i83.photobucket.com/albums/j319/buns78/2006-04-14001.jpg

[STANG KILLA SS]

new vid of mine
well i dont know whats wrong with my damn vid software but it keeps locking up during the burning to wmv so i had to make it in 3 parts .

well here it (they) are



http://media.putfile.com/NYLINT-1-40

http://media.putfile.com/NYLINT-2-57

http://media.putfile.com/NYLINT-3

[rydinhigh]

Here is my 1:6 just finished putting it back together after paint. I took off the skid plates, rock sliders, windshield and wipers. Next thing to do is a tummy tuck and to get more lift/flex out of this thing.
http://fordtruckworld.tenmagazines.com/gallery/2002F150/671777.jpg
http://fordtruckworld.tenmagazines.com/gallery/2002F150/671776.jpg

[Jamus]

Here's mine. I didn't expect the paint to some out good at all, or I would have cleaned up the cuts better. Mostly stock, inboard rear springs, rear ext wheelbase, tummy tuck.



http://img.photobucket.com/albums/v404/Jamus28/Nylint/paint1.jpg

[bigcat280]

A couple of new crawlers, plus some updated Avalanche pic...


http://i71.photobucket.com/albums/i145/bigcat280/Picture073.jpg
http://i71.photobucket.com/albums/i145/bigcat280/Picture074.jpg
http://i71.photobucket.com/albums/i145/bigcat280/Picture071.jpg
http://i71.photobucket.com/albums/i145/bigcat280/Picture075.jpg
http://i71.photobucket.com/albums/i145/bigcat280/Picture072.jpg

[VanDusen1]

This is my first nylint project i got some extra axles from a buddy and put this thing together

this is the first pass, I am sure that it will be changed many times before I can call it complete

the body is not mounted yet
http://i35.photobucket.com/albums/d170/Dusier/P1010001.jpg

gettin some flex
http://i35.photobucket.com/albums/d170/Dusier/P1010010.jpg

holdin the tire up
http://i35.photobucket.com/albums/d170/Dusier/P1010008.jpg


made motor mount and move the motor to the rear of the axle
http://i35.photobucket.com/albums/d170/Dusier/DVC00030.jpg

Shaved the front of the axle still have to seal it and make a new skid for it
http://i35.photobucket.com/albums/d170/Dusier/DVC00031.jpg

[Maverick]

http://file008.bebo.com/large/2006/05/28/21/20249588a941887527b344520416l.jpghttp://file008.bebo.com/large/2006/05/28/21/20249588a941919095b322503682l.jpg

[MJADDICTION]

A friend talked me into buying one. Now look what happened after finding this web site... in less than 48 hours;
removed and replaced stickers, Paint, extended wheel base, front body lift, inboarded shocks front and rear, removed skid plates, narrowed raised tires, and wheels. Works very well.

http://i10.photobucket.com/albums/a147/MJADDICTION/301757786305_0_ALB.jpg

http://i10.photobucket.com/albums/a147/MJADDICTION/880757786305_0_ALB.jpg

http://i10.photobucket.com/albums/a147/MJADDICTION/131757786305_0_ALB.jpg

http://i10.photobucket.com/albums/a147/MJADDICTION/931757786305_0_ALB.jpg

http://i10.photobucket.com/albums/a147/MJADDICTION/511757786305_0_ALB.jpg

[289YJ]

Here's mine so far, nothing too crazy but I like it.
http://memimage.cardomain.net/member_images/11/web/623000-623999/623123_72.jpg

http://memimage.cardomain.net/member_images/11/web/623000-623999/623123_73.jpg

http://memimage.cardomain.net/member_images/11/web/623000-623999/623123_74.jpg
It's got flipped and grooved tires, paint, spare, relocated rear shocks, extended front-end, skid plates and other stuff. I've beat the piss outta this thing and everything has held up but the belts are starting to slip a little, probably from driving up and down the creek in my yard. I don't think you can beat these for $49.00.;-)

[tellico cabins]

http://myspace-121.vo.llnwd.net/00805/12/15/805135121_l.jpg
http://myspace-803.vo.llnwd.net/00805/30/87/805137803_l.jpg
http://myspace-743.vo.llnwd.net/00805/34/77/805127743_l.jpg
http://myspace-441.vo.llnwd.net/00805/14/43/805123441_l.jpg
http://myspace-590.vo.llnwd.net/00805/09/54/805184590_l.jpg
http://myspace-792.vo.llnwd.net/00805/29/77/805187792_l.jpg
http://myspace-590.vo.llnwd.net/00805/09/50/805190590_l.jpg
http://myspace-246.vo.llnwd.net/00805/64/28/805198246_l.jpg

Mods:
aluminum skid plates
front and rear shock remounts
trimmed tires
tummy tuck
axle reinforcement
body trim
four-link extension front and rear

do you have a 1:1 crawler:?:
do you go to tellico NC:?:
need a place to stay:?:
well stay at tellico cabin rentals:!:
visit our website:!:
www.tellicocabinrentals.com (http://www.tellicocabinrentals.com)

thank you

[jeepbus]

Heres mine ,Get ya some of that Gary....
http://i56.photobucket.com/albums/g178/jeepbus/mypictures073.jpg
http://i56.photobucket.com/albums/g178/jeepbus/mypictures069.jpg
http://i56.photobucket.com/albums/g178/jeepbus/mypictures072.jpg

[GeoffSFAs10]

Headlights, inboard rear shocks, trimming rear axle. thats about it

http://img.photobucket.com/albums/v86/GeoffSFAs10/Nylint%20crawler/IMG_4439.jpg

http://img.photobucket.com/albums/v86/GeoffSFAs10/Nylint%20crawler/IMG_4429.jpg

http://img.photobucket.com/albums/v86/GeoffSFAs10/Nylint%20crawler/IMG_4423.jpg

[TheRumbleFish]

Here's my newest 1:6

http://img106.imageshack.us/img106/2930/10072904hv.jpg

Pretty much stock. I had to get rid of those nasty Gators colors so I taped up the roll cage. I got carried away with the tape and put on racing stripes too. I'm sure they'll start peeling off right away but it was a fun experiment.

[CLiffwalker]

This is the same paint scheme as my 1:1 Buggy.http://www.bannedrc.com/forum/files/crawler_pics_001.jpg
http://www.bannedrc.com/forum/files/crawler_pics_002.jpg
http://www.bannedrc.com/forum/files/crawler_pics_003.jpg
http://www.bannedrc.com/forum/files/crawler_pics_004.jpg
http://www.bannedrc.com/forum/files/crawler_pics_005.jpg
http://www.bannedrc.com/forum/files/crawler_pics_006.jpg
http://www.bannedrc.com/forum/files/crawler_pics_007.jpg
http://www.bannedrc.com/forum/files/crawler_pics_008.jpg
http://www.bannedrc.com/forum/files/crawler_pics_009.jpg
http://www.bannedrc.com/forum/files/crawler_pics_010.jpg

[YoungCrawler]

Haha, and to think i scared the $H!T out of a dude delivering papers with this..http://i44.photobucket.com/albums/f44/xr100rider/Scorpion5.jpg

[yamaharider308a]

Well heres my crawler...mostly stock but does decent in my opinion.
mods:
o-ring trick
bedlocks out of tires for flexyer tires
inboarded rear shocks
high gears taken out
rollcage cut and taped and winsheild taken out
everything else is stock

http://i37.photobucket.com/albums/e95/yamaharider308a/100_1138-1.jpg
http://i37.photobucket.com/albums/e95/yamaharider308a/100_1139.jpg
http://i37.photobucket.com/albums/e95/yamaharider308a/100_1140.jpg

[geezy0022]

http://i46.photobucket.com/albums/f108/geezy0022/newjeep2firstoutting015.jpg
http://i46.photobucket.com/albums/f108/geezy0022/newjeep2firstoutting011.jpg

[93ZeeJay]

here's a few pics of my crawler...nothing major done to her yet, but i just picked up a second one to play with while this one's having some down time...

http://f3.yahoofs.com/users/41e1fe3ez3e3db3a5/fd15/__sr_/48a1.jpg?phIpXmEB0LslYq9E

http://f3.yahoofs.com/users/41e1fe3ez3e3db3a5/fd15/__sr_/9022.jpg?phIpXmEBRxnggg6Y

http://f3.yahoofs.com/users/41e1fe3ez3e3db3a5/fd15/__sr_/73cf.jpg?phIpXmEBOWtQgud1

[TVG4Life]

Here are several pictures of our members rides from 806 Rock Crawlers. We still have some members to take pictures of so more to come soon!

http://i64.photobucket.com/albums/h190/TVG4Life/806_Rock_Crawlers/806RockCrawlerSign.jpg
http://i64.photobucket.com/albums/h190/TVG4Life/806_Rock_Crawlers/806Group.jpg
http://i64.photobucket.com/albums/h190/TVG4Life/806_Rock_Crawlers/806Group02.jpg
http://i64.photobucket.com/albums/h190/TVG4Life/806_Rock_Crawlers/806Crawler03.jpg
http://i64.photobucket.com/albums/h190/TVG4Life/806_Rock_Crawlers/806Crawler02.jpg
http://i64.photobucket.com/albums/h190/TVG4Life/806_Rock_Crawlers/806Crawler01.jpg

The Jeep with the black hood & rope is all VINYL - No paint with exception to Blue Metallic & Black on rims.
Mods = Triangular Rear Shocks - Removed rear tabs - All black vinyl by 3M Controltac w/ Comply & Diamond Plate vinyl for rocker panels. Last but not least Snorkel.
Mods 2 Come = Tummy Tuck, NOS bottle, Fire Extingushier, 4WS and finally new chassis

[TVG4Life]

http://i64.photobucket.com/albums/h190/TVG4Life/806_Rock_Crawlers/806Crawler04.jpg
http://i64.photobucket.com/albums/h190/TVG4Life/806_Rock_Crawlers/806Crawler05.jpg
http://i64.photobucket.com/albums/h190/TVG4Life/806_Rock_Crawlers/806Crawler06.jpg
http://i64.photobucket.com/albums/h190/TVG4Life/806_Rock_Crawlers/806Crawler07.jpg
http://i64.photobucket.com/albums/h190/TVG4Life/806_Rock_Crawlers/806Crawler08.jpg
http://i64.photobucket.com/albums/h190/TVG4Life/806_Rock_Crawlers/806Crawler09.jpg
http://i64.photobucket.com/albums/h190/TVG4Life/806_Rock_Crawlers/806Crawler10.jpg
http://i64.photobucket.com/albums/h190/TVG4Life/806_Rock_Crawlers/806Crawler11.jpg
http://i64.photobucket.com/albums/h190/TVG4Life/806_Rock_Crawlers/806Crawler12.jpg
http://i64.photobucket.com/albums/h190/TVG4Life/806_Rock_Crawlers/806Crawler13.jpg
http://i64.photobucket.com/albums/h190/TVG4Life/806_Rock_Crawlers/806Crawler14.jpg
http://i64.photobucket.com/albums/h190/TVG4Life/806_Rock_Crawlers/806Crawler15.jpg
http://i64.photobucket.com/albums/h190/TVG4Life/806_Rock_Crawlers/806Crawler16.jpg
http://i64.photobucket.com/albums/h190/TVG4Life/806_Rock_Crawlers/806Crawler17.jpg

[BigYellaJeep]

Few shots with the big brother.

http://i9.photobucket.com/albums/a57/jrbirdman06/IMG_0246.jpg

http://i9.photobucket.com/albums/a57/jrbirdman06/IMG_0245.jpg

http://i9.photobucket.com/albums/a57/jrbirdman06/IMG_0248.jpg

[TVG4Life]

http://i64.photobucket.com/albums/h190/TVG4Life/806_Rock_Crawlers/806RockCrawlerSign.jpg
http://i64.photobucket.com/albums/h190/TVG4Life/806_Rock_Crawlers/806Crawler18.jpg
http://i64.photobucket.com/albums/h190/TVG4Life/806_Rock_Crawlers/806Crawler19.jpg
http://i64.photobucket.com/albums/h190/TVG4Life/806_Rock_Crawlers/806Crawler20.jpg
http://i64.photobucket.com/albums/h190/TVG4Life/806_Rock_Crawlers/806Crawler21.jpg

[drakonus]

http://i59.photobucket.com/albums/g291/drakonusx/DSC03262.jpg

http://i59.photobucket.com/albums/g291/drakonusx/DSC03260.jpg

[drakonus]

http://i59.photobucket.com/albums/g291/drakonusx/diff1.jpg
it has a little lift

[shawnf6]

http://img149.imageshack.us/img149/6186/boatpics014large6wy.th.jpg (http://img149.imageshack.us/my.php?image=boatpics014large6wy.jpg)http://img99.imageshack.us/img99/3848/wincheditedlarge2pb.th.jpg (http://img99.imageshack.us/my.php?image=wincheditedlarge2pb.jpg)this is some up dated shots . fixed again with dually's and now broken again. just keep buying more.....

[TVG4Life]

Here is the area that hosted this past weekends rock crawl. Then some pics of our 1/6 rock crawlers climbing same area.

http://i64.photobucket.com/albums/h190/TVG4Life/806_Rock_Crawlers/River.jpg
http://i64.photobucket.com/albums/h190/TVG4Life/806_Rock_Crawlers/River06.jpg
http://i64.photobucket.com/albums/h190/TVG4Life/806_Rock_Crawlers/River03.jpg
http://i64.photobucket.com/albums/h190/TVG4Life/806_Rock_Crawlers/River02.jpg

http://i64.photobucket.com/albums/h190/TVG4Life/806_Rock_Crawlers/River05.jpg
http://i64.photobucket.com/albums/h190/TVG4Life/806_Rock_Crawlers/River04.jpg

[russp]

heres some poser pics of my over worked SCORP :flipoff:

http://f10.putfile.com/7/18302091758-thumb.jpg (http://putfile.com/pic.php?pic=7/18302091758.jpg&s=f10) http://f10.putfile.com/7/18302083180-thumb.jpg (http://putfile.com/pic.php?pic=7/18302083180.jpg&s=f10)

http://f10.putfile.com/7/18302063058-thumb.jpg (http://putfile.com/pic.php?pic=7/18302063058.jpg&s=f10) http://f10.putfile.com/7/18302054431-thumb.jpg (http://putfile.com/pic.php?pic=7/18302054431.jpg&s=f10)

http://f10.putfile.com/7/18302043169-thumb.jpg (http://putfile.com/pic.php?pic=7/18302043169.jpg&s=f10) http://f10.putfile.com/7/18302032876-thumb.jpg (http://putfile.com/pic.php?pic=7/18302032876.jpg&s=f10)

http://f10.putfile.com/7/18302024071-thumb.jpg (http://putfile.com/pic.php?pic=7/18302024071.jpg&s=f10) http://f10.putfile.com/7/18301590523-thumb.jpg (http://putfile.com/pic.php?pic=7/18301590523.jpg&s=f10)

[lukesyz85]

here is mine

http://s80.photobucket.com/albums/j164/lukesxr80/?action=view&current=de3d2c9f.jpg&refPage=&imgAnch=imgAnch4

http://s80.photobucket.com/albums/j164/lukesxr80/?action=view&current=10a5fe0b.jpg&refPage=&imgAnch=imgAnch3

http://s80.photobucket.com/albums/j164/lukesxr80/?action=view&current=24f8b2cc.jpg&refPage=&imgAnch=imgAnch2

[zero cool]

Here's my Jeep. The body just got out of the paint booth this morning. I'm probably going to paint the arms but not today.

http://www.grimmjeeper.com/nylint/jeep2.jpg

http://www.grimmjeeper.com/nylint/jeep4.jpg

http://www.grimmjeeper.com/nylint/jeep5.jpg

[No_Bs]

Best I can do with my phone. The paint used to be nice.... Just finished making the stinger functional.
https://cms.psu.edu/AngelUploads/Files/saf5000/07-01-06_1820.jpg
https://cms.psu.edu/AngelUploads/Files/saf5000/07-05-06_2037.jpg
https://cms.psu.edu/AngelUploads/Files/saf5000/07-05-06_2039.jpg
https://cms.psu.edu/AngelUploads/Files/saf5000/07-05-06_2040.jpg

[BLACKHOCK]

WELL HERE IS MINE SO FAR
http://i44.photobucket.com/albums/f21/BLACKHOCK/MY%20SCORPION%20ROCK%20CRAWLER/100_33033.jpg
http://i44.photobucket.com/albums/f21/BLACKHOCK/MY%20SCORPION%20ROCK%20CRAWLER/100_33066.jpg
AFTER A FEW MODS: SUSPENSION WORK,TUMMY TUCK AND PAINT
http://i44.photobucket.com/albums/f21/BLACKHOCK/MY%20SCORPION%20ROCK%20CRAWLER/100_33399.jpg
http://i44.photobucket.com/albums/f21/BLACKHOCK/MY%20SCORPION%20ROCK%20CRAWLER/100_33388.jpg
http://i44.photobucket.com/albums/f21/BLACKHOCK/MY%20SCORPION%20ROCK%20CRAWLER/100_33311.jpg

[wal-mart crawler]

http://www.rcpics.net/member/wal-martnylint
Some quick pics. Ill have lots more as the work progresses.
I have to build my woman a pink one, she likes crawling, she is a good driver.

Quick vid when I did the tummy tuck. Had to do a height check.
http://www.rcpics.net/img/78955

[dog_party]

No mods yet. Just thought I'd share a couple shots from a horrendously challenging ;-) obstacle I ran across in the living room.

http://i31.photobucket.com/albums/c367/Dog_Party/IMGP1659.jpg

http://i31.photobucket.com/albums/c367/Dog_Party/IMGP1651.jpg

[CRUSHER1]

http://i78.photobucket.com/albums/j101/CRUSHER_01/100_9494.jpg
http://i78.photobucket.com/albums/j101/CRUSHER_01/100_9492.jpg
http://i78.photobucket.com/albums/j101/CRUSHER_01/100_9495.jpg
http://i78.photobucket.com/albums/j101/CRUSHER_01/100_9496.jpg
ENJOY!!

[Wrecker]

My most recent "Stick #2".

http://i50.photobucket.com/albums/f317/4xcrawler/stick220.jpg
http://i50.photobucket.com/albums/f317/4xcrawler/stick219.jpg
http://i50.photobucket.com/albums/f317/4xcrawler/stick225.jpg
http://i50.photobucket.com/albums/f317/4xcrawler/stick224.jpg
http://i50.photobucket.com/albums/f317/4xcrawler/stick216.jpg
http://i50.photobucket.com/albums/f317/4xcrawler/stick26.jpg
http://i50.photobucket.com/albums/f317/4xcrawler/stick232.jpg

[Wrecker]

And the stick that started it all......, the Original, the first, Sticked 1:6th Nylint.

http://i50.photobucket.com/albums/f317/4xcrawler/RR5-216.jpg
http://i50.photobucket.com/albums/f317/4xcrawler/RR5-212.jpg
http://i50.photobucket.com/albums/f317/4xcrawler/RR5-211.jpg
http://i50.photobucket.com/albums/f317/4xcrawler/RR5-214.jpg
http://i50.photobucket.com/albums/f317/4xcrawler/Moab-May06141b.jpg
http://i50.photobucket.com/albums/f317/4xcrawler/body18.jpg

[studda]

Metalic Green Duplicolor that doesn't stick well.

http://f10.putfile.com/thumb/7/20418112895.jpg (http://putfile.com/pic.php?pic=main/7/20418112895.jpg&s=f10)
http://f10.putfile.com/thumb/7/20418101073.jpg (http://putfile.com/pic.php?pic=main/7/20418101073.jpg&s=f10)

[drift&crawl]

sup guys kind of a newbie to crawling, into Drifting actually... I got my nylint a few months ago and i have broken and fixed quite a few things... a friend and I have done our best to correct most of the common breaks, I look forward to gaining info from this site.. im not trying to dump tons of money into this thing, what why mine is somewhat "ghetto" but hey it works ...(for a good amount of time till i break it again lol..) but its a fun thing to do when i have nothen else to do!!...
as of now I have
Reversed tires
Placed JB weld on the susp arms to prevent the front axle from jumping and messing up the hubs!!
Lift Kit : )
used metal wiring as a dampening system
cut the plastic things that prevent the susp arms from moving front and back
i want to do a triangular mount in the rear tha would be cool well here are some pics

http://i7.tinypic.com/210di1h.jpg
http://i7.tinypic.com/210dj44.jpg
WE ALSO DRIFT bishes! 8)

http://i7.tinypic.com/210djlf.jpg
http://i7.tinypic.com/210dlli.jpg
http://i7.tinypic.com/210dm5k.jpg

[Jeepernick]

Pede body and new course
http://home.comcast.net/%7Enickbaldwin/RC%20RockCrawler/New%20Course/100_2823.jpg
http://home.comcast.net/%7Enickbaldwin/RC%20RockCrawler/New%20Course/100_2824.jpg
4-Linked
http://home.comcast.net/%7Enickbaldwin/RC%20RockCrawler/Crawler%20LINKED/100_2811.jpg
http://home.comcast.net/%7Enickbaldwin/RC%20RockCrawler/Crawler%20LINKED/100_2812.jpg

http://home.comcast.net/%7Enickbaldwin/RC%20RockCrawler/Crawler%20LINKED/100_2813.jpg



http://home.comcast.net/%7Enickbaldwin/RC%20RockCrawler/Crawler%20LINKED/100_2820.jpg
http://home.comcast.net/%7Enickbaldwin/RC%20RockCrawler/Crawler%20LINKED/100_2821.jpg

[drift&crawl]

today, at work, (autozone) i found a returned, and damaged front license plate... so i was like hmmmm and we made it into a skid plate and kinda curved it out the front so the front would get less hung up on rocks esp going down hill.... I also painted the Wheels and did a new sorta camo paint job on the thing for the h3ll of it id like to do a desert camo on it if i ever get time/drive to do somethin well enjoy tell me what you think...
http://streetneeds.com/uploads/auser/Picture038_____.jpg


http://streetneeds.com/uploads/auser/Picture033________.jpg

http://streetneeds.com/uploads/auser/Picture045_.jpg

http://streetneeds.com/uploads/auser/Picture044_____.jpg

[tommyboy]

http://img100.imageshack.us/img100/7703/dsc02916dt6.jpg (http://imageshack.us)

[CRUSHER1]

http://i78.photobucket.com/albums/j101/CRUSHER_01/100_9556.jpg
http://i78.photobucket.com/albums/j101/CRUSHER_01/100_9554-1.jpg
http://i78.photobucket.com/albums/j101/CRUSHER_01/100_9555.jpg

[Bad67bird]

heres mine:
http://bad67bird.250free.com/100_1168.jpg
http://bad67bird.250free.com/100_1169.jpg
http://bad67bird.250free.com/100_1170.jpg
http://bad67bird.250free.com/100_1171.jpg
http://bad67bird.250free.com/100_1180.jpg
http://bad67bird.250free.com/100_1206.jpg
http://bad67bird.250free.com/100_1207.jpg

[Mudskipper]

Here's mine.Nothing special yet but I just found this site so maybe soon.
http://i2.photobucket.com/albums/y12/the3cotes/110-1085_IMG.jpg

[pro_tryer]

http://www.nutzcc.com/nolat_elgae/rightside1.jpg
http://www.nutzcc.com/nolat_elgae/popunder1.jpg
http://www.nutzcc.com/nolat_elgae/newrear1.jpg
http://www.nutzcc.com/nolat_elgae/onpop1.jpg

[Jeepernick]

http://home.comcast.net/~nickbaldwin/RC%20RockCrawler/New%20Chassis/100_2945.JPG

http://home.comcast.net/~nickbaldwin/RC%20RockCrawler/New%20Chassis/On%20the%20Rocks/100_2947.JPG

think I am done now

I dont see how I can do much more too it :lol:

[peebles24]

I'm new to the board but I've had the nylint for a while now. The first pic is bone stock. The second two pics is after most of the mods I will do, all of which I did today, most after I found this forum.

Today I cut the shocks and shortened the pistons. I cut 4 rings off the springs. I moved the front and rear shocks inward at the top. I extended the rear, and cut all 4 fenders. I also reversed and siped all the tires. She now wears a nice charcoal and black paint job.

In the next to last pic you can see I'm occasionally dropping a shock, I think I will make some limiting straps. I would like to do a tummy tuck I just don't know if I want to dig into the electronics.

The ramp is 30 degrees and I built two of them. I take it to the Badlands in Attica, IN when I go wheeling in my SOA '76 FJ40.

The last pic is of my 40 series at the badlands on the 30 degree RTI ramp.

http://i90.photobucket.com/albums/k267/peebles24/rcrockcrawler111.jpg
http://i90.photobucket.com/albums/k267/peebles24/2006stuff116.jpg
http://i90.photobucket.com/albums/k267/peebles24/2006stuff118.jpg
http://i90.photobucket.com/albums/k267/peebles24/nylint105.jpg
http://i90.photobucket.com/albums/k267/peebles24/nylint110.jpg
http://i90.photobucket.com/albums/k267/peebles24/FJtrailteambadlands1052.jpg

[trickedoutTLT06]

Heres my guys..http://i64.photobucket.com/albums/h170/crawlertypeofguy/crawlin007.jpg
http://i64.photobucket.com/albums/h170/crawlertypeofguy/crawlin006.jpg
http://i64.photobucket.com/albums/h170/crawlertypeofguy/crawlin004.jpg
http://i64.photobucket.com/albums/h170/crawlertypeofguy/crawlin003.jpg
http://i64.photobucket.com/albums/h170/crawlertypeofguy/crawlin002.jpg
http://i64.photobucket.com/albums/h170/crawlertypeofguy/crawlin010.jpg

[Karma]

Before fab.......

http://img246.imageshack.us/my.php?image=picture009pr6.jpg


After a little fab.......

http://img142.imageshack.us/my.php?image=picture036sv7.jpg


Project twinstick comming soon.....

[OFFROADUNLIMITED1]

17634

17635

17636

17637

17638

[No_Bs]

After a fresh new coat of paint, new (functional -- one can easily pick up the entire thing) shackles, and lots of abuse:
https://cms.psu.edu/AngelUploads/Files/saf5000/crawler.jpg
https://cms.psu.edu/AngelUploads/Files/saf5000/crawler1.jpg
https://cms.psu.edu/AngelUploads/Files/saf5000/crawler2.jpg
https://cms.psu.edu/AngelUploads/Files/saf5000/08-17-06_1541.jpg

[four wheel peel]

well i been hangin around here for some time now aint got any real acton pics just a few of em sittin around so here they are


1 F-150 body wheelbase extended and o ringed tummy tuck since tis pic and axle shave is beinmg worked on now
http://i103.photobucket.com/albums/m138/joshj_01/f-150nylint.jpg

2 is my scorpion with a tt and dual tires o rings and extended wheel base and axle shave by far the best goin one i have i think i need to update all these picshttp://i103.photobucket.com/albums/m138/joshj_01/tanscorp.jpg



3 yellow jeep all stock nothing done but beat the paint off it and made a bikini top for ithttp://i103.photobucket.com/albums/m138/joshj_01/yelloownylint.jpg

4 a jeep all cut up with every thing done to it that can be done except shocks and moabs flexes little too much i thinkhttp://i103.photobucket.com/albums/m138/joshj_01/littlebitofflex.jpg

and thats about all i think

[four wheel peel]

oh i forgot one more only real actoin pic i got

http://i103.photobucket.com/albums/m138/joshj_01/crawlin.jpg

http://i103.photobucket.com/albums/m138/joshj_01/100_0474.jpg

[Canadian Crawler]

Well now that mines been modded and whatnot , time for me to put mine here, enjoy.

http://i5.photobucket.com/albums/y156/Muzara/Rockbridge2.jpg
http://i5.photobucket.com/albums/y156/Muzara/falls2.jpg
http://i5.photobucket.com/albums/y156/Muzara/falls.jpg
http://i5.photobucket.com/albums/y156/Muzara/Meancrazyhill.jpg
http://i5.photobucket.com/albums/y156/Muzara/Liscenceplate.jpg
http://i5.photobucket.com/albums/y156/Muzara/Upthehill.jpg
http://i5.photobucket.com/albums/y156/Muzara/Fronts.jpg

[corncrawler]

my crawler
http://memimage.cardomain.net/member_images/5/web/689000-689999/689458_70_full.jpg

my buddy's Jeep
http://memimage.cardomain.net/member_images/5/web/689000-689999/689458_71_full.jpg

our "Little Moab" spot :flipoff: (arrows mark the spots, pic shows about 1/4 of the place)
http://memimage.cardomain.net/member_images/5/web/689000-689999/689458_73_full.jpg

[b2bomber]

http://offroadworld.tenmagazines.com/gallery/mudzda/148864.jpg
going home after a long day on the trail:flipoff: . that's my first jeep and my friends scorp.
http://offroadworld.tenmagazines.com/gallery/mudzda/149302.jpg
the "stick" is my first jeep now and the olive is my first jeep body on my second jeep
http://offroadworld.tenmagazines.com/gallery/mudzda/150075.jpg
the green one is my second jeep with a TT and shaved rear axle. i'm taking the olive body out of commision for a bit. and pinky is my
GF's rig. all stock cept paint.
http://offroadworld.tenmagazines.com/gallery/mudzda/150077.jpg
my third is still in the box waiting for me to use it for parts or do something to it.

[minydigger]

New to the board this is my Hummer bodied scorp.http://img374.imageshack.us/img374/2617/gfgfg004mo5.jpghttp://img365.imageshack.us/img365/2995/gfgfg006lg9.jpg It sports sipped tires a t/t cut shocks and limiting straps.

[HeavyMetal]

FLAT TUMMY TUCK http://img.photobucket.com/albums/v31/mrmontez2000/HeavyMetalJeep/Smileys/headbang.gif , all metal skids/belly. tire carrier/top skids

http://img.photobucket.com/albums/v31/mrmontez2000/Crawlers/crawler1.jpg
http://img.photobucket.com/albums/v31/mrmontez2000/Crawlers/crawler2.jpg
http://img.photobucket.com/albums/v31/mrmontez2000/Crawlers/crawler3.jpg
http://img.photobucket.com/albums/v31/mrmontez2000/Crawlers/crawler4.jpg
http://img.photobucket.com/albums/v31/mrmontez2000/Crawlers/crawler5.jpg
http://img.photobucket.com/albums/v31/mrmontez2000/Crawlers/crawler6.jpg

and the body still fits for the most part some how

http://img.photobucket.com/albums/v31/mrmontez2000/Crawlers/crawler7.jpg
http://img.photobucket.com/albums/v31/mrmontez2000/Crawlers/crawler8.jpg

[GuAnAtoS]

2 of my 3 1:6, i just cut the fenders and relocate the rear socks.


http://www.adrenalina4x4.com/albums/album80/IMG_0020.sized.jpg

http://www.adrenalina4x4.com/albums/album80/IMG_0019.sized.jpg

http://www.adrenalina4x4.com/albums/album80/IMG_0018.sized.jpg

http://www.adrenalina4x4.com/albums/album80/IMG_0024.sized.jpg

http://www.adrenalina4x4.com/albums/album80/IMG_0023.sized.jpg

All the Family :flipoff:

http://www.adrenalina4x4.com/albums/album80/P1010094.sized.jpg

[rutler101]

http://myspace-668.vo.llnwd.net/01197/86/61/1197991668_m.jpg
my buddies rig, beaver, on the rocks
http://myspace-097.vo.llnwd.net/01197/79/02/1197992097_m.jpg
both my buddies rigs, levi (red scorpion), beaver (orange jeep)
http://myspace-197.vo.llnwd.net/01197/79/11/1197991197_m.jpg
beavers parking spot at home
more to come mine isnt done more mods to be done:twisted:

[merlin]

http://img86.imageshack.us/img86/2333/build15dw0.jpg
http://img68.imageshack.us/img68/8480/build14rx1.jpg
http://img134.imageshack.us/img134/6865/build13xv0.jpg

[drakonus]

http://i24.photobucket.com/albums/c25/xdrakonusx/myjeep.jpg


http://i24.photobucket.com/albums/c25/xdrakonusx/mytruck2.jpg

[fastimes]

http://i37.photobucket.com/albums/e52/fastimes/rccrawler003.jpghttp://i37.photobucket.com/albums/e52/fastimes/rccrawler001.jpghere. custom built chassis. can build custom chassis if anyone is interested.

[brent460]

http://i77.photobucket.com/albums/j42/jenn2350/100_0011.jpg

[merlin]

Made a little change. See if you can spot it
http://img144.imageshack.us/img144/8700/1002363bf0.jpg
http://img144.imageshack.us/img144/770/1002362hk1.jpg
http://img143.imageshack.us/img143/8576/1002361nc1.jpg
http://img139.imageshack.us/img139/1084/1002360ic5.jpg

[Bam Bam]

Here mine

[trickedoutTLT06]

YAY! A STOCK NYLINT!!!!!:shock:

[Jeepernick]

YAY! A STOCK NYLINT!!!!!:shock:

WRONG

the bead locks are painted :flipoff:

[merlin]

My Updated Nylint C-10
http://img133.imageshack.us/img133/6273/1002381yu1.jpg

[bow-tie-boy]

http://i12.photobucket.com/albums/a221/bowtieboy/finishedcage1.jpg

http://i12.photobucket.com/albums/a221/bowtieboy/finishedcage2.jpg

Finaly got around to finishing the cage for the 1/6th. It's still lighter than that stock body.

[carbonuts]

i picked this up at a garage sale cheapest nylint ever .25 cents

http://i97.photobucket.com/albums/l219/carbonuts/mylittlenylint.jpg

[TwistedXT]

...
So i seen some pics on the board somewhere that had me cracking up and thought i would make a really sweet wallpaper for my computer here at work. So busted out the super model after i got my jeep back together last night and got some shots. Got my clothe top on now to!


http://img.photobucket.com/albums/v486/yellowfox/Nylint/BW3.jpg

http://img.photobucket.com/albums/v486/yellowfox/Nylint/BW1.jpg

http://img.photobucket.com/albums/v486/yellowfox/Nylint/BW4.jpg

http://img.photobucket.com/albums/v486/yellowfox/Nylint/BW2.jpg

[TwistedXT]

painted my wally crawler...



http://img231.imageshack.us/my.php?image=jeep31zl.jpg

http://img360.imageshack.us/my.php?image=jeep25dg.jpg

http://img360.imageshack.us/my.php?image=jeep15du.jpg
...

Figured I'd mod this one.

Cut the tires, removed the decals, and made some rear corner panels for it from 1:16 double diamond plate from Plastruct.

http://www.projecttwin.com/files/walscorp/quarters.jpg

I just Dremeled off the stock tail lights and fuel filler. I'll might make replacements...not too worried about it. :lol:

Will most likely end up putting some sort of hobby grade radio gear in this one if it ever breaks.

Found an old G.I. Joe guy in a old RC box in the garage and also an old MASK figure(how many people on here remember MASK?)



http://www.rcrockgear.com/BC/PICT7556_re.jpg

http://www.rcrockgear.com/BC/PICT7557_re.jpg

i pulled this off of a walmart monster truck.
http://www.texas4x4.org/gallery/album307/DSC02843_1


what do you think?

if you want to see more pics
http://www.texas4x4.org/gallery/album307

[TwistedXT]

Here are the ones I bought and painted for myself and a friend today. The paint is krylon fusion satin black. the roll bar and sliders are krylon fusion burgundy. I have another one with burgundy body, black sliders and grey roll cage...because I ran out of flippin black and I am in the middle of the wyoming wilderness stuck on a gas drilling rig...

http://phonese.cx/2005/08/16/Picture019.jpg


http://phonese.cx/2005/08/16/Picture001.jpg

I am originally from Ogden utah as is the owner of the black one...big ups to the O-TOWN *****es!! We will be back in town in a few days, time to get some rocks!!


Well heres my blue jeep had it forlike 2 days now...i painted it with candy blue, candy blue rings, yamaha silver cage, and black primer on the bumper, canopy, and steps... ive also cut 3 rings off each spring.this thing is sooo fun to drive !

http://www.az-rcfreaks.com/modules/gallery/albums/azsandduners-Garage/Picture_126.jpg
http://www.az-rcfreaks.com/modules/gallery/albums/azsandduners-Garage/Picture_127.jpg
http://www.az-rcfreaks.com/modules/gallery/albums/azsandduners-Garage/Picture_128.jpg
http://www.az-rcfreaks.com/modules/gallery/albums/azsandduners-Garage/Picture_129.jpg
http://www.az-rcfreaks.com/modules/gallery/albums/azsandduners-Garage/Picture_132.jpg
http://www.az-rcfreaks.com/modules/gallery/albums/azsandduners-Garage/Picture_134.jpg
...

Today i finally went crawling for my first time ever. I know this isnt the best thing to crawl with and the only reason i dont have a better crawler is because there is no place to crawl in Huntington Beach. All stock, the only thing i did was cut 3 rings off the bottom of the spring. I plan to do more as it is still a little bouncy. On to the pictures! My computer is acting weird so only 4 of the 13 i took uploaded. More tomorrow!
http://img.photobucket.com/albums/v489/xtman/fc5556d3.jpg

http://img.photobucket.com/albums/v489/xtman/3d9e73af.jpg

http://img.photobucket.com/albums/v489/xtman/b08e0c51.jpg

http://img.photobucket.com/albums/v489/xtman/a6f7049c.jpg
All were driven into and out of!

[TwistedXT]

what's up guys... just got done painting my Jeep this weekend... here's a few pics:
http://img.photobucket.com/albums/v610/4RunnerKid/Toys/IMG_3624.jpg
http://img.photobucket.com/albums/v610/4RunnerKid/Toys/IMG_3622.jpg
http://img.photobucket.com/albums/v610/4RunnerKid/Toys/IMG_3620.jpg
i'll get some wheeling pics soon... :twisted:

...

my friends and i went out the other night and found some rocks, bricks, cement and whatever else we could find... we threw them all on my sidewalk and did a little wheeling. ha ha. here's the pics: http://www.supermotors.org/vehicles/registry/detail.php?id=7173&s=27834#content
http://www.supermotors.org/getfile/235641/fullsize/IMG_3687.JPG
http://www.supermotors.org/getfile/235599/fullsize/IMG_3662.JPG
http://www.supermotors.org/getfile/235623/fullsize/IMG_3672.JPG
http://www.supermotors.org/getfile/235625/fullsize/IMG_3673.JPG
http://www.supermotors.org/getfile/235636/fullsize/IMG_3683.JPG
http://www.supermotors.org/getfile/235640/fullsize/IMG_3686.JPG
http://www.supermotors.org/getfile/235642/fullsize/IMG_3688.JPG
http://www.supermotors.org/getfile/235598/fullsize/IMG_3661.JPG
http://www.supermotors.org/getfile/235601/fullsize/IMG_3664.JPG
http://www.supermotors.org/getfile/235631/fullsize/IMG_3678.JPG
http://www.supermotors.org/getfile/235632/fullsize/IMG_3679.JPG
http://www.supermotors.org/getfile/235634/fullsize/IMG_3681.JPG
http://www.supermotors.org/getfile/235643/fullsize/IMG_3689.JPG
http://www.supermotors.org/getfile/235644/fullsize/IMG_3690.JPG
http://www.supermotors.org/getfile/235645/fullsize/IMG_3691.JPG

[TwistedXT]

I was bored while I was waiting for the battery to charge..so I painted it. After driving for a bit I also cut coils, much better now. Anyways, here are some pics.
http://www.society-designs.com/sorazal/crawler1.jpg
http://www.society-designs.com/sorazal/crawler2.jpg
http://www.society-designs.com/sorazal/crawler3.jpg


I picked this thing up the day I moved into school. It's quite the toy. My tuber is on hold for now.

Action pics...

http://cherokee.groundclearance.com:81/albums/album05/CIMG4607.sized.jpg

http://cherokee.groundclearance.com:81/albums/album05/CIMG4614.sized.jpg

http://cherokee.groundclearance.com:81/albums/album05/CIMG4613.sized.jpg

http://cherokee.groundclearance.com:81/albums/album05/CIMG4616.sized.jpg

Sits nice and low with no coils.

http://cherokee.groundclearance.com:81/albums/album05/CIMG4618.sized.jpg

ZR and Misty, both employed by TAK Engineering, wanted to take the afternoon off and take "Cheap Thrill" out for a ride....

Misty wanted to drive, so ZR rode "Winch Wench."

Misty dropped into the pit and checked the flex on a small rock:

http://home.triad.rr.com/ag4rz/images/wheeling.JPG

ZR was holding the rollbar as Misty crept over the terrain:

http://home.triad.rr.com/ag4rz/images/wheeling1.jpg

Misty insisted on not changing out of her work clothes!

http://home.triad.rr.com/ag4rz/images/wheeling2.jpg

Loving the flex!!

http://home.triad.rr.com/ag4rz/images/wheeling3.jpg

Looking for the tires to grab on this small ledge:

http://home.triad.rr.com/ag4rz/images/wheeling4.jpg

ZR says we need some diff guards!

http://home.triad.rr.com/ag4rz/images/wheeling5.jpg

Misty shows off for the camera:

http://home.triad.rr.com/ag4rz/images/wheeling6.jpg

Actually drove it out of this...some damage to the paint on the drivers side, but hey...

http://home.triad.rr.com/ag4rz/images/wheeling7.jpg

One last shot before heading home. ZR says we gotta get the rock lights on this thing quick!

http://home.triad.rr.com/ag4rz/images/wheeling8.jpg

All pictures were driven into/out of. I continue to be impressed with this little rig...

The Park I wheel at is 5 mins. from the house, and literally has 3/4 of a mile of rock like this to play on...all surrounding a nice small lake and walking track...If anyone in Winston Salem or the triad area of NC is interested in crawling together, let me know!!!!

Tim
AG4RZ

...

[TwistedXT]

well, Bighead and i made a course in his backyard the a week or so ago. Bighead's rear axle took a crap on him, so his day was cut a bit short. here's the few pics i got of the virgin run... there will be more in the near future...
http://www.supermotors.org/getfile/238003/fullsize/IMG_3692.JPG
http://www.supermotors.org/getfile/238005/fullsize/IMG_3693.JPG
http://www.supermotors.org/getfile/238021/fullsize/IMG_3694.JPG
http://www.supermotors.org/getfile/238026/fullsize/IMG_3698.JPG
http://www.supermotors.org/getfile/238027/fullsize/IMG_3699.JPG
http://www.supermotors.org/getfile/238053/fullsize/IMG_3700.JPG
http://www.supermotors.org/getfile/238054/fullsize/IMG_3701.JPG
and a couple vids...
FAILED ATTEMPT (http://www.supermotors.org/getfile/238055//MVI_3695.AVI)
SUCCESSFUL ATTEMPT (http://www.supermotors.org/getfile/238056//MVI_3696.AVI)


no no - i meant with the nylint jeep -
specs on it are:

removed springs from shocks - i did have them completely off but with the larger tires the body was actually sitting on the tires, so i had to find a way to raise it back up a little.

trimmed the crap out of the wheelwells, trimmed the front bumper to prevent front wheels from rubbing when turning.

removed winshield and rock sliders and headlights

painted 3m undercoating on the body, its holding up really well, high gloss black on the rest, flakes off pretty easily.

i have a stick pack that i bungee across the seat for when i feel like running around in high on the street.

next on the list is to silicone the lower louvers on the axle to keep water out.
cut some more on the tires to get them a little softer

i have had 0 problems with it since i got it. only been through like 3-4 packs. they last a good 45 minutes - less now that the bigger tires are on. they work very well though. the added clearance helps alot on the steep ledges, its still really stable off camber.

http://img329.imageshack.us/my.php?image=1071075hy.jpg

http://img329.imageshack.us/my.php?image=1081080pj.jpg

http://img329.imageshack.us/my.php?image=1091091qy.jpg

http://img329.imageshack.us/my.php?image=1101109or.jpg

http://img329.imageshack.us/my.php?image=1111111wd.jpg

http://img329.imageshack.us/my.php?image=1121121pz.jpg

http://img329.imageshack.us/my.php?image=1131134ux.jpg

http://img329.imageshack.us/my.php?image=1141140mg.jpg

http://img329.imageshack.us/my.php?image=1151154as.jpg

http://img329.imageshack.us/my.php?image=1161165jy.jpg


http://img329.imageshack.us/my.php?image=1171173yk.jpg

http://img329.imageshack.us/my.php?image=1181189nx.jpg

http://img231.imageshack.us/my.php?image=1191192os.jpg

http://img231.imageshack.us/my.php?image=1201200fy.jpg


...

[TwistedXT]

so last night at around midnight, Bighead and i decided to do a little crawling... no carnage to report other than a few rolls... here's the pics:
http://www.supermotors.org/getfile/238585/fullsize/IMG_3780.JPG
http://www.supermotors.org/getfile/238589/fullsize/IMG_3783.JPG
http://www.supermotors.org/getfile/238590/fullsize/IMG_3784.JPG
http://www.supermotors.org/getfile/238597/fullsize/IMG_3785.JPG
http://www.supermotors.org/getfile/238599/fullsize/IMG_3787.JPG
http://www.supermotors.org/getfile/238601/fullsize/IMG_3788.JPG
http://www.supermotors.org/getfile/238638/fullsize/IMG_3791.JPG
http://www.supermotors.org/getfile/238658/fullsize/IMG_3792.JPG
http://www.supermotors.org/getfile/238661/fullsize/IMG_3795.JPG
...
Cool photos. I like the paint schemes. Looks like you are a good candidate for headlight/rock light mod.

http://www.photodump.com/direct/ygohome/ToyJeepLEDs019.jpg
http://www.photodump.com/direct/ygohome/ToyJeepLEDs003.jpg

Those are of the 1:6 scale but could be done the same way to the 1:18 scale.

photos and wiring is in the 1:6 forum.

http://mywebpages.comcast.net/pwrwgn/StevesRCwheels.html

Hey everybody, Here are some pics of mine. I have already moved the rear shocks in. Those of you that have moved the front shocks in, do your tires rub at full stuff? I have also noticed that alot of people are removing there rock sliders, Mine have kept me from tearing the paint off my tub. The next thing I want to do is add some lites. I have been amazed at what this thing will do. Sorry for the poser pics, But its all i had on my computer. So, tell me what ya-all think, lol.
Rockwag91

Yep, thanks to badger i finally got my rig painted. I airbrushed the actualy body adn the rest was painted by a spray can. But you guys dont care.

Pics!!!:
http://img.photobucket.com/albums/v489/xtman/100_1677.jpg

http://img.photobucket.com/albums/v489/xtman/100_1683.jpg

http://img.photobucket.com/albums/v489/xtman/100_1682.jpg

http://img.photobucket.com/albums/v489/xtman/100_1681.jpg

http://img.photobucket.com/albums/v489/xtman/100_1680.jpg

http://img.photobucket.com/albums/v489/xtman/100_1678.jpg

well, this had been my first venture into the small scale rockcrawling. i've had experience with the 1:1 stuff. this is just as much fun though, especially since i don't have a trail rig right now :| .

anyway, i've done a few mods.... removed the springs, did the bic pen mod w/limiting straps instead of shocks, comp cut the back of the body. thats about it for now, i'd like to do some electronics mods, maybe proportional throttle and steering...anyway, heres some pics. and yes, i know the comp cut is a little rough right now, i haven't had a chance to clean it up yet :flipoff:

http://www.ok4wd.com/write/rides/350/large/100_7166.jpg
http://www.ok4wd.com/write/rides/350/large/100_7167.jpg
http://www.ok4wd.com/write/rides/350/large/100_7168.jpg
http://www.ok4wd.com/write/rides/350/large/100_7172.jpg
http://www.ok4wd.com/write/rides/350/large/100_7173.jpg

[TwistedXT]

I was bored of the rocks so I figured I'd take her in the mud, all shots were driven into and out of no posers. Enjoy, and yes my electronics made it out alive. My digi died or else I would have some ones of it going deeper I had the water a little bit over the back rear fender.

http://tinypic.com/b61ok1.jpg
http://tinypic.com/b61p1f.jpg
http://tinypic.com/b61p3b.jpg
http://tinypic.com/b61p8y.jpg
http://tinypic.com/b61pbl.jpg
http://tinypic.com/b61pg5.jpg
http://tinypic.com/b61pj8.jpg
http://tinypic.com/b61qup.jpg
http://tinypic.com/b61qvt.jpg
http://tinypic.com/b61r0h.jpg

http://img.photobucket.com/albums/v375/theone13/rc2.jpg

http://img.photobucket.com/albums/v375/theone13/rc3.jpg

http://img.photobucket.com/albums/v375/theone13/rc.jpg

This is our local trail. Haven't measured how long it is, but it's fun, and 5 seconds away.
http://img.photobucket.com/albums/v375/theone13/P1010061.jpg


still trying to decide on paint for the little guy.


http://img5.imageshack.us/img5/3681/dsc042775iz.jpg (http://imageshack.us)

http://img150.imageshack.us/img150/3853/dsc042478kf.jpg (http://imageshack.us)

http://img150.imageshack.us/img150/7204/dsc042495wz.jpg (http://imageshack.us)

http://img150.imageshack.us/img150/2339/dsc042351cb.jpg (http://imageshack.us)

heres a couple shots of me and my buddies jeep crawlers

http://memimage.cardomain.net/member_images/4/web/808000-808999/808454_65_full.jpg


http://memimage.cardomain.net/member_images/4/web/808000-808999/808454_66.jpg


http://memimage.cardomain.net/member_images/4/web/808000-808999/808454_67.jpg



http://memimage.cardomain.net/member_images/4/web/808000-808999/808454_69.jpg


yes they are poser pics but who cares....


oh and the balck and yellow one is mine and painted after this
http://memimage.cardomain.net/member_images/9/web/429000-429999/429771_115.jpg
...

[TwistedXT]

A few pics and video from the weekend. Sorry the for choppy video and no sound.
What can you except from video quality out of a $110 digi camera.

http://img242.imageshack.us/img242/9893/dscf0642medium6tn.jpg

http://img242.imageshack.us/img242/4935/dscf0638medium7cr.jpg

http://img242.imageshack.us/img242/1081/dscf0641medium0fe.jpg

http://img214.imageshack.us/img214/2110/dscf06312jo.jpg

http://img242.imageshack.us/img242/9902/dscf0640medium7ie.jpg


http://media.putfile.com/crawler1

http://media.putfile.com/c278

Curb crawlin in 4-high...

http://media.putfile.com/curb1


I finally broke down and layed some paint today. The body is Model Master Champagne Gold Metalic, the seats, cage, toneau, sliders, suspension links and underside of the body are Krylon semi flat black. The gold didn't really lay as good as it could have, so some of the paint is kinda boogered up.
http://x2.putfile.com/8/23719083865-thumb.jpg (http://putfile.com/pic.php?pic=8/23719083865.jpg&s=x2)
UPDATE: I thought it was missing something so I threw some black paint on the raised section of the hood. Sorry for the fuzzy pic, I'm not a profesional.
http://x7.putfile.com/8/24119191652-thumb.jpg (http://putfile.com/pic.php?pic=8/24119191652.jpg&s=x7)


Sorry it's late and I'm tired so this will be a cut-n-paste post..........;-)


Well I got bored today while I was waiting for another project to dry. So I ripped apart the old Nylint, I had held off because I wanted to show a friend of mine the Scorpion in it's stock form, he is an old 4x4er and I figured with his 4 year olds B-Day coming the scorpion was something he needed to see.

Well I had every intention of going all out with this one, but I really like the stock Nylint, something about overcoming obstacles with a so called Toy. So I decided to do a few things that anyone could do to improve performance. a tutorial coming ASAP.

I may still go crazy with this one or I may buy another one just to see how far I can take it, not sure yet, but I do know this is not the last Nylint this household will own.

Halfway through this project I decided to paint it, it rained here so Mowing was out.

Well the paint finally dried and I got her back together so you will have to wait until tomorrow for outdoor pics.

http://ripper7racing.com/forums/uploads/post-46-1125546059.jpg


http://ripper7racing.com/forums/uploads/post-46-1125546079.jpg


http://ripper7racing.com/forums/uploads/post-46-1125546142.jpg
[/url]


[url="http://www.rccrawler.com/forum/member.php?u=2249"]Trike Kid (http://ripper7racing.com/forums/uploads/post-46-1125546079.jpg) vbmenu_register("postmenu_144353", true); - No Biggie, we all tend to glance over pics now and than. vbmenu_register("postmenu_144353", true);


SLOMatt (http://www.rccrawler.com/forum/member.php?u=3089) vbmenu_register("postmenu_144316", true); - Yes, reversing the axle makes a big difference, it should have come this way, tires grip so much better when they are leading the axle.

I will write up a tutorial tonight on what all I did, I tried to keep all the mods easy and cheap.




As promissed some outdoor action pics
http://www.ripper7racing.com/myimages/nylint/fin1.jpg

http://www.ripper7racing.com/myimages/nylint/fin2.jpg

http://www.ripper7racing.com/myimages/nylint/fin3.jpg

I'm adding a dry river bed to my crawling area, this is just a small sample of the area

http://www.ripper7racing.com/myimages/nylint/fin4.jpg

Up.....

http://www.ripper7racing.com/myimages/nylint/fin5.jpg

and over...

http://www.ripper7racing.com/myimages/nylint/fin6.jpg

Well sometimes you just get stuck on the axle.......

http://www.ripper7racing.com/myimages/nylint/fin7.jpg

Pop it in Reverse and line it up for another run

http://www.ripper7racing.com/myimages/nylint/fin8.jpg

I gotta say these Nylint Crawlers take the award for best backyard crawler.


well today as i was preparin my savage for this weekends race i was thinking i wonder if i could put a differnt body on my jeep?

so i tried my new F-650 body painted pecta true blue perl with black backing and chrome paint for my bumpers and toolbox

i knwo the rear wheel wells dont x-catly match up but i think it looks alright

good tip: Any MT body maxx size....savage.....LST....they should look good...i know proline makes certian bodies in extened versions like escalade silverrado

just some thoughts :-P ;-) :mrgreen:


http://img50.imageshack.us/img50/4316/nylint30013bz.jpg

http://img50.imageshack.us/img50/2395/nylint30028yr.jpg

http://img50.imageshack.us/img50/9340/nylint30035aw.jpg

http://img50.imageshack.us/img50/1007/nylint30040xc.jpg

http://img209.imageshack.us/img209/1608/nylint30059cs.jpg

I wanted to post up a pic. I think this SuperCrew body looks good on my 1:18 Scorpion chassis.

http://www.streetsourcemag.com/uploads/OwnerProfiles/BIGRIGZ/94200544801PM81501.jpg

http://www.streetsourcemag.com/uploads/OwnerProfiles/BIGRIGZ/94200544927PM84791.jpg

Hope the pics work?


Been having camera problems for the past few weeks, but I am finally able to post pictures again. I figured I would post some pics of my Nylint Scorpion as I build it up. Keep in mind that I don't want to do anything serious to this truck....I just want to keep it running and gain a little bit of performance.

First, I cut the springs to lower it some, and allow full flex. Next, I modified the shocks to gain a tiny bit more travel. After those mods, I just drove it alot, and did my best not to break it. :mrgreen: After evalauating its performance, I decided the next thing to do would be to deal with the rear axle, specifically how it would get hung up on the sharp forward edge. My solution....Take a Publix member keychain card and make a nice transition from the skid to the axle. I roughed up the axle some with a file, and then used Goop to attach the card. This makes a nice slick ramp between the center skidplate and the axlehousing. The mod seems to help in preventing hangups, and protects the wire to the rear motor.

Then, today I was kinda bored, so I started scavenging for a new body for it.

This is what I came up with, for now. :lol:

http://img14.imageshack.us/img14/2974/nylint14il.jpg

I found un unopened lego monster truck kit in the box of old toys and junk in the basement, so I built the body and attached it to the chassis. Instant fullsize Chevy. :lol:

http://img91.imageshack.us/img91/5199/nylint27eq.jpg

Body damage. :mrgreen:

http://img134.imageshack.us/img134/9646/nylint38ne.jpg

Rollovers hurt now. :twisted:

http://img322.imageshack.us/img322/5241/nylint46ky.jpg

Aftermath

http://img151.imageshack.us/img151/886/nylint58ih.jpg


Destroyer


Here is my Jeep (1:6) and my girlfriends (1:18 ).

http://img.photobucket.com/albums/v375/theone13/crawlers013.jpg

http://img.photobucket.com/albums/v375/theone13/crawlers020.jpg

http://img.photobucket.com/albums/v375/theone13/crawlers030.jpg

http://img.photobucket.com/albums/v375/theone13/crawlers029.jpg

http://img.photobucket.com/albums/v375/theone13/crawlers032.jpg

I like the way it turned out... Looks pretty cool!
http://www.erikasdeli.net/temp/mini.jpg

I tryed to make it the same color is my 1:1 Jeep but it is not really that close
http://www.erikasdeli.net/temp/jeep.jpg
...
I added a small dry river bed to my Rock slide area in the backyard, it makes a nice little course for the nylints.

The jeep is my new Nylint Crawler, it's stock but it won't be for very long.

http://www.ripper7racing.com/myimages/red_rock/rr1.jpg

http://www.ripper7racing.com/myimages/red_rock/rr1b.jpg

http://www.ripper7racing.com/myimages/red_rock/rr2.jpg

http://www.ripper7racing.com/myimages/red_rock/rr3.jpg

http://www.ripper7racing.com/myimages/red_rock/rr4.jpg

http://www.ripper7racing.com/myimages/red_rock/rr5.jpg

[TwistedXT]

soaked the wheels in fantastik to remove the chrome. drilled out 4 of the 8 holes for the tires to give more. painted them semi flat black and hit the bolt heads with a silver paint marker. painted the body semi flat black to match. these things are a lot of fun! i don't plan on doing any suspension mods. just drive the crap out of it until it breaks and return it to wal mart.

oh crap, i forgot to buy a barbie doll to put in the driver's seat! :flipoff:

http://img.photobucket.com/albums/v488/greghanna/IMG_0694.jpg
http://img.photobucket.com/albums/v488/greghanna/IMG_0682.jpg

How did you fasten them to the chassis?

I kept mine pretty low so i don't use limiting straps and the wheel travel goes RIGHT inside the wheel well. Never had a shock pull apart yet.

http://img.photobucket.com/albums/v486/yellowfox/Nylint/PoseTweaked2.jpg

Went out to the creek behind my house today to wheel around a little, here are the pics. :mrgreen:

Flexing Down rock
http://www.puderproductions.net/Pictures/RC/Rc%20Wheeling%209-1-05/FlexDownRock.jpg

"Pucker Hill"
http://www.puderproductions.net/Pictures/RC/Rc%20Wheeling%209-1-05/RCSidewaysTireLift.jpg
New Licence Plate :)
http://www.puderproductions.net/Pictures/RC/Rc%20Wheeling%209-1-05/RCTireLiftBack.jpg
http://www.puderproductions.net/Pictures/RC/Rc%20Wheeling%209-1-05/RCTireLiftFront.jpg

Tree Squeeze Trail
http://www.puderproductions.net/Pictures/RC/Rc%20Wheeling%209-1-05/SidewaysThruTree.jpg
http://www.puderproductions.net/Pictures/RC/Rc%20Wheeling%209-1-05/RCRockFlexUp.jpg

Even got my girlfriend to do a little crawling :lol:
http://www.puderproductions.net/Pictures/RC/Rc%20Wheeling%209-1-05/NayDriveRC.jpg


Got my Dodge Body in and installed....Painted it a bit...Got some more work to do, but let me know how you like it!http://memimage.cardomain.net/member_images/2/web/290000-290999/290002_136_full.jpg
http://memimage.cardomain.net/member_images/2/web/290000-290999/290002_137_full.jpg


so far its stock cept for the obvious, reversed tires, and 5 coils cut front and rear. this weekend its getting stretched 1.5 - 2 inches along with the rear cut off and a custom cage. the new paint job (thank god this orange & blue is going) will be red and black.

http://community.webshots.com/album/456805882qYkuBg

http://www.texas4x4.org/gallery/album225

nothing major just enough to test things out.


edit: silverado's mine, scorpion's my brothers and the jeep's my nephews.


nice rock rings. :) washers?
http://www.texas4x4.org/gallery/albums/album225/DSC06462_1.jpg


I dove tailed mine. My first I Comp cut it but the tires would still rub on the body and limit the fix and tire the gears up also. So when I dove tailed it. when the axle travels up the shock mounts acts as a bump stop agaisnt the body. Works perfect.
First time comp cut. Notice the tires hitting.
http://www.run2jeepn.photosite.com/%7Ephotos/tn/292_348.ts1127407432736.jpg
http://www.run2jeepn.photosite.com/%7Ephotos/tn/300_348.ts1127720198868.jpg
Sorry the pic is side ways, but notice the shock mount hit the tub . The tire isn't hitting the body at all.
http://www.run2jeepn.photosite.com/%7Ephotos/tn/299_348.ts1127720193210.jpg
http://www.run2jeepn.photosite.com/%7Ephotos/tn/302_348.ts1127720210675.jpg
All I did was cut the tub the way I whated it. Made a little plate with four holes and drilled though the rear of the tub and bolted. Used an hobby knife and a lighter to cut and mod the inner brackets. And once I paint the tub you won't even notice the bolts the back all that much. I was going the glue it, but I figured this would be way stronger.
http://www.run2jeepn.photosite.com/%7Ephotos/tn/296_348.ts1127720175314.jpg
Hope this helps.
...

[TwistedXT]

these are of my 1:6 jeep now with ram headlites and new offroad stickers

http://www.one18th.com/GetGallery7513.htm

Ok, third time's a charm...let's see if this works...

http://i21.photobucket.com/albums/b300/Rerock/rccrawler01.jpg

http://i21.photobucket.com/albums/b300/Rerock/rccrawler03.jpg

http://i21.photobucket.com/albums/b300/Rerock/rccrawler02.jpg


http://i21.photobucket.com/albums/b300/Rerock/rccrawler05.jpg

http://i21.photobucket.com/albums/b300/Rerock/rccrawler04.jpg

Here is where i will put pics and such of my nylint instead of creating a new thread everytime : )
I've done some modifications:
9" wheelbase
Reversed Rear Axle
Cut Coils
Tummy Tuck (Great Mod!)
BB's in Tires (Great Mod!)
Comp Cut Rear End

This is my first RC Crawler. I've learned how to solder with it : )
I'm seriously thinking of making a scale RC Crawler later on, after I get tired of this wal mart crawler! I'm located in San Diego.:flipoff:

http://img.photobucket.com/albums/v205/Turboduck01/nylint.jpg

so far its been painted, tires reversed, stretched the rear 1 1/4 inches, cut the back for clearance, cut front fenders away, cut 5 springs in the back and removed them in the front, and i removed the stupid boner bar.sorry about the size if the pic

http://i9.photobucket.com/albums/a81/tjader312/DCP_3080.jpg
http://photobucket.com/albums/a81/tjader312/?

Broke one of the control arms today and that prompted me to do some mods to the Jeep...enjoy!

BEFORE

http://www.usjeeps.com/members/p447-1128012010.jpg

http://www.usjeeps.com/members/p447-1128011985.jpg


AFTER

http://img.photobucket.com/albums/v88/BrentNClemson/Jeep/Wally%20Crawler/IMG_7341.jpg

http://img.photobucket.com/albums/v88/BrentNClemson/Jeep/Wally%20Crawler/IMG_7337.jpg


Chopped rear, 11" wheelbase, springs removed, and some other stuff. I'd like to get the springs back on there, relocate the shocks, and get some more ground clearance sometime...

Your wheelbase isn't much different than my Scorpion's. I'm running a 10.5" wheelbase with the control arms flipped and 3.5 coils cut along with a tummy tuck (highly recommended :mrgreen: ), 4ws and all aftermarket electronics. It's pretty much unstoppable, except for the darned leading edge of the rear axle!! :evil: With running 4ws, I can't turn the rear end around, so I'm hosed until I can find slightly larger tires to run (other than 2.2s).

http://img.photobucket.com/albums/v66/bugman72/Rock%20Crawler/9-25-05crawling22_20050926_-1259400.jpg

http://img.photobucket.com/albums/v66/bugman72/Rock%20Crawler/9-25-05crawling0_20050926_-28398550.jpg

...

[TwistedXT]

http://www.omghi2.us/april05/RC-%20Alburg-%20twist%20in%20mud.JPG

http://www.omghi2.us/april05/RC-%20Alburg-%20twisted%20up.JPG

http://www.omghi2.us/april05/RC-%20Alburg-%20twisted%20up%20another%20veiw.JPG

http://www.omghi2.us/april05/RC-%20Alburg-%20twisted%20from%20rear.JPG

http://www.omghi2.us/april05/RC-%20Alburg-%20stuie%20flex.JPG

http://www.omghi2.us/april05/RC-%20Alburg-%20scottie%20flex.JPG


http://www.omghi2.us/april05/RC-%20Alburg-%20almost%20over.JPG

http://www.omghi2.us/april05/RC-%20Alburg-%20almost%20over%20another%20veiw.JPG


http://www.omghi2.us/april05/RC-%20Alburg-%20twist%20in%20mud%20another.JPG

http://www.omghi2.us/april05/RC-%20Alburg-%20Pucker%20brush.JPG

http://www.omghi2.us/april05/RC-%20Alburg-%20crapy%20flex%20pic.JPG


http://www.omghi2.us/april05/RC-%20scotty%20almost%20stuck%20in%20mud.JPG

http://www.omghi2.us/april05/RC-%20scotty%20stuck%20in%20mud.JPG

http://www.omghi2.us/april05/RC-%20Alburg-%20on%20large%20rock.JPG



Sorry if there are too many pics, but quite a few people wanted to see some more pics of my truck soo...


Stu


some more old pics:


http://www.omghi2.us/april05/RC-%20School-both%20trucks%20flex.JPG

http://www.omghi2.us/april05/RC-Jambo-scottys%20first%20flex.JPG


Stu

First three pics are of a ledge that stock I couldn't get up without utilizing the tree root to the right of the Jeep. Now, it just hops right up with a little wheel crank to the right. I think this is mainly due to the axle reverse and cut tires.

http://img.photobucket.com/albums/v483/geauxturbo/crawloff_practice0001.jpg

http://img.photobucket.com/albums/v483/geauxturbo/crawloff_practice0002.jpg

http://img.photobucket.com/albums/v483/geauxturbo/crawloff_practice0003.jpg

THen, just a couple pics playing in the testing grounds.

http://img.photobucket.com/albums/v483/geauxturbo/crawloff_practice0011.jpg

http://img.photobucket.com/albums/v483/geauxturbo/crawloff_practice0005.jpg

http://img.photobucket.com/albums/v483/geauxturbo/crawloff_practice0004.jpg

Looking forward to seeing what the other folks are running tomorrow. :mrgreen:
...

[TwistedXT]

Well I'm still having trouble with my front axle, and I don't think I have all the bugs worked out of my ESC but here are some pics of my almost completed Jeep.http://i12.photobucket.com/albums/a224/Rooney7783/black1.jpg http://i12.photobucket.com/albums/a224/Rooney7783/black2.jpg http://i12.photobucket.com/albums/a224/Rooney7783/black3.jpg http://i12.photobucket.com/albums/a224/Rooney7783/black10.jpg http://i12.photobucket.com/albums/a224/Rooney7783/black11.jpg http://i12.photobucket.com/albums/a224/Rooney7783/black5.jpg

All pics were, of course, driven into and out of. Let me know what ya'll think.
...

[GuAnAtoS]

Here's my Jeep with new modifications


Is just matter of relocate coils
http://www.adrenalina4x4.com/albums/album80/12_10_06_1520.jpg


http://www.adrenalina4x4.com/albums/album80/12_10_06_1526.jpg




Check my new skid plate
http://www.adrenalina4x4.com/albums/album80/12_10_06_1527.jpg



http://www.adrenalina4x4.com/albums/album80/12_10_06_1524.jpg

[TwistedXT]

took the Jeep wheeling yesterday and today a bit. got a couple vids from yesterday, and some pics from today...
UP A LEDGE (http://www.supermotors.org/getfile/252401//MVI_4064.AVI)
A LITTLE ROLL (http://www.supermotors.org/getfile/252402//MVI_4065.AVI)
http://www.supermotors.org/getfile/252820/fullsize/IMG_4090.JPG
http://www.supermotors.org/getfile/252822/fullsize/IMG_4091.JPG
http://www.supermotors.org/getfile/252829/fullsize/IMG_4092.JPG
http://www.supermotors.org/getfile/252832/fullsize/IMG_4094.JPG
http://www.supermotors.org/getfile/252834/fullsize/IMG_4095.JPG

:-P Hi, everyone I just finished up my Nylint crawler,you can check it out on page 4 at www.intvisuals.com/twisted.htm (http://www.intvisuals.com/twisted.htm) It has a XRS esc , a Airtronics Blazer radio, rear axle flip, 1/2 inch tummy tuck,shimed axles, narrow ford body, custom made arm pins to give the front a 1/2 inch on the wheel base and the back also for a total of 1 inch. It also has Traxxas 2.2 wheels(narrowed) with Losi tires witch are just about twice as wide and about 3/4 inch taller then stock, this is a little easier on the gears. The truck is only 1and1/2 ozs heavier then stock. The total price is about $230.00 . Thank you for looking and I also have parts for sale in the for sale ads.:-P p.s the radio is only $42.00 and duel steering rates, servo reversing, th/st trims and look at how small the servo is.


Just out front of the house

http://i29.photobucket.com/albums/c269/camoTJ40/nylint037.jpg
http://i29.photobucket.com/albums/c269/camoTJ40/nylint027.jpg
http://i29.photobucket.com/albums/c269/camoTJ40/nylint026.jpg
http://i29.photobucket.com/albums/c269/camoTJ40/nylint031.jpg
http://i29.photobucket.com/albums/c269/camoTJ40/nylint032.jpg
http://i29.photobucket.com/albums/c269/camoTJ40/nylint034.jpg
http://i29.photobucket.com/albums/c269/camoTJ40/nylint035.jpg

first test run of the jeep with the moved shocks and stretched wheelbase. Now I just need to give it a tummy tuck, and some limiting straps for the back, every now and then the rear shocks with seperate (even with the longer front shock bodys) oh and paint

the stinger doesnt hold anything on... I just trimmed the front mount so it would fit with the shocks
http://i29.photobucket.com/albums/c269/camoTJ40/nylint014.jpg
http://i29.photobucket.com/albums/c269/camoTJ40/nylint018.jpg

Hey everyone, Been a while since i have been on the board. Nothing has changed to much on my truck. Shaved some fender wells for clearence. Bout it. Still have a ton of parts sitting around waiting to be modded. I have a rear axle shaved almost just like camoTJ (awesome job by the way) and a front end trimmed up with a servo relocated. I'll have to post some pics sometime soon. Here are a couple wheelin pics and a vid from the other day.

http://media.putfile.com/Stair-climb

http://img.photobucket.com/albums/v486/yellowfox/Nylint/th_Jeep6-small.jpg (http://img.photobucket.com/albums/v486/yellowfox/Nylint/Jeep6-small.jpg)

http://img.photobucket.com/albums/v486/yellowfox/Nylint/th_Jeep5-small.jpg (http://img.photobucket.com/albums/v486/yellowfox/Nylint/Jeep5-small.jpg)

http://img.photobucket.com/albums/v486/yellowfox/Nylint/th_Jeep4-small.jpg (http://img.photobucket.com/albums/v486/yellowfox/Nylint/Jeep4-small.jpg)

http://img.photobucket.com/albums/v486/yellowfox/Nylint/th_Jeep2-small.jpg (http://img.photobucket.com/albums/v486/yellowfox/Nylint/Jeep2-small.jpg)

http://img.photobucket.com/albums/v486/yellowfox/Nylint/th_Jeep1-small.jpg (http://img.photobucket.com/albums/v486/yellowfox/Nylint/Jeep1-small.jpg)

Thanks, the jeep has a few more scratches than the last time i was posting here. No major problem since my last break.

Any new news on the drive belts? I replaced them once already but the new ones are already starting to give. Who was using the O-rings, how are they holding up?

A few older pics wehn the jeeps first came out. I think Stu might remember a couple.

http://img.photobucket.com/albums/v486/yellowfox/Nylint/th_BW3.jpg (http://img.photobucket.com/albums/v486/yellowfox/Nylint/BW3.jpg)

http://img.photobucket.com/albums/v486/yellowfox/Nylint/th_PoseTweaked.jpg (http://img.photobucket.com/albums/v486/yellowfox/Nylint/PoseTweaked.jpg)

http://img.photobucket.com/albums/v486/yellowfox/Nylint/th_PoseSide3.jpg (http://img.photobucket.com/albums/v486/yellowfox/Nylint/PoseSide3.jpg)

...

[TwistedXT]

Well, I got my Nylint about a month ago, and as I was walking out the door of Walmart, I told myself that I am not going to mod this thing. Well, as you can see that didn't happen. Heres what I have done so far.

1. real electronics including duratrax esc5000, futaba radio, and traxxas servo
2. cut tires
3. reversed tires
4. new shocks
5. extension
6. Tlt-1 body

This weekend I plan on reversing the rear axle, giving it a tummy tuck, and painting the suspension arms. This thing crawls very good. It is going to be even better after this weekend. Can't wait. I will soon be posting some video.

Here are some pics. enjoy
1. http://www.rcpics.net/img/68073
2. http://www.rcpics.net/img/68072
3. http://www.rcpics.net/img/68071
4. http://www.rcpics.net/img/68075
5. http://www.rcpics.net/img/68076
6. http://www.rcpics.net/img/68078
7. http://www.rcpics.net/img/68080


Nothing as cool or modified as some others on the board, but still fun nonetheless!!!

http://img.photobucket.com/albums/v155/leadfoot/2005_1113_150418AA.jpg

This is my badass cat that was my spotter for the day. He randomly showed up on my door step one day. He is addicted to kibbles n bits like a herion addict is to herion. He's an awesome mouse and chipmunk slayer, and in his free time he spots for the rock crawl my nylint does. :flipoff: His name is cat, because I cannot think of a name for him.

http://img.photobucket.com/albums/v155/leadfoot/2005_1113_150844AA.jpg

I took the wrong line off this rock climb and wound up like this. A tap in reverse and it was on all fours. Just before that, I hit it full throttle in low range and one of the rocks kicked back causing it to flip backwards on the cage, onto the wheels again. It sucked that I didn't have a video camera.

http://img.photobucket.com/albums/v155/leadfoot/2005_1113_152121AA.jpg

Here it is climbing 13 steps. It actually wound up like this because I have to angle it pretty severly (as the big turd diff hits the ledge before tires hit) on the step above it, it rolled down one set and sat exactly how it is in the pic.

http://img.photobucket.com/albums/v155/leadfoot/2005_1113_153724AA.jpg

All i gotta do is stretch the WB on the rear of the 1:6 and it will match my 104" yj! :lol:

http://img.photobucket.com/albums/v155/leadfoot/2005_1113_162318AA.jpg


Hi all new member but I've been lurking for a while.

Thanks to everyone for the tips and ideas on modifications.

The is what I've done to mine:

- Upgraded to real Electronics: Futaba Servo, Airtronics Rx, Airtronics ES-01 ESC
- Converted stock pack to flat Sixer (2500 Mah one in the works).
- Radiator removed for clearance
- Front shocks relocated
- Front tub modofied for servo clearance
- Servo mount, tummy tuck plate, and rear shock mounts created out of ABS
- Mini On/Off switch mounted behind servo tub cutout
- Rear axle flipped
- New links created for rear and front. Front ones mounted behind servo horn.

I've had a blast with this thing and my kids love it also. Amazing piece of engineering.

Here are some pics let me know what you think.

http://www.rcpics.net/member/papewayo


...Papewayo

Heres a list of mods: cut and flipped tires
tummy tuck
modded body
extended front and rear
sorry bout the crappy pics my cam is retarded
http://i31.photobucket.com/albums/c397/mikejones4846/Picture5.jpghttp://i31.photobucket.com/albums/c397/mikejones4846/nylint1.jpg:flipoff:

Took some pictures of my first time playing with the scorpion today. Had lots of fun, and it gave me some much needed insight on what I am gonna have to do to this thing to make it crawl good. First thing is the tires have to be grooved because they dont grab worth a crap on the limestone and the wet dirt. I want to keep the budget under $100 total for it. Feel free to bash away at my newbie-ness :flipoff:

pics (http://pg.photos.yahoo.com/ph/just_call_me_cody/album?.dir=/2bcb)


well, the tires dont "self clean" real well

http://img.photobucket.com/albums/v463/cvecmaxx/DSCF0726.jpg

but it crawls pretty good

...

[TwistedXT]

http://img.photobucket.com/albums/v251/444marlin/NyLint%20Krawlers/11-19.jpg

http://img.photobucket.com/albums/v251/444marlin/NyLint%20Krawlers/11-193.jpg

http://img.photobucket.com/albums/v251/444marlin/NyLint%20Krawlers/11-192.jpg

http://img.photobucket.com/albums/v251/444marlin/NyLint%20Krawlers/11-194.jpg

http://img.photobucket.com/albums/v251/444marlin/NyLint%20Krawlers/11-195.jpg
http://img.photobucket.com/albums/v251/444marlin/NyLint%20Krawlers/11-196.jpg

Think I'll need bigger axles?
http://img.photobucket.com/albums/v251/444marlin/NyLint%20Krawlers/11-191.jpg




http://img.photobucket.com/albums/v251/444marlin/NyLint%20Krawlers/1124.jpg
http://img.photobucket.com/albums/v251/444marlin/NyLint%20Krawlers/11-234.jpg
http://img.photobucket.com/albums/v251/444marlin/NyLint%20Krawlers/11-235.jpg
http://img.photobucket.com/albums/v251/444marlin/NyLint%20Krawlers/11-233.jpg
http://img.photobucket.com/albums/v251/444marlin/NyLint%20Krawlers/cutboggers2.jpg
http://img.photobucket.com/albums/v251/444marlin/NyLint%20Krawlers/cutboggers.jpg
http://img.photobucket.com/albums/v251/444marlin/NyLint%20Krawlers/11-232.jpg
http://img.photobucket.com/albums/v251/444marlin/NyLint%20Krawlers/shockmounts.jpg
Those are the very last mods I have made as of the date in the pics.
The last tread pattern I used before the cut boggers on it now.
http://img.photobucket.com/albums/v251/444marlin/NyLint%20Krawlers/bogger.jpg


I finally got time to get pics of my nylints. I couldnt get any shots on the rocks right now becouse its raining.


http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTE1MDQxODZzNDEzZGZkMzF5NTQx.jpg (http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTE1MDQxODZzNDEzZGZkMzF5NTQx.jpg)

as you can see the jeep is my favorite

http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTE1MDQxOTZzNDEzZGZkMzF5NTQx.jpg (http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTE1MDQxOTZzNDEzZGZkMzF5NTQx.jpg)



http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTE1MDQyMDZzNDEzZGZkMzF5NTQx.jpg (http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTE1MDQyMDZzNDEzZGZkMzF5NTQx.jpg)


http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTE1MDQyMTZzNDEzZGZkMzF5NTQx.jpg (http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTE1MDQyMTZzNDEzZGZkMzF5NTQx.jpg)



http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTE1MDQyMjZzNDEzZGZkMzF5NTQx.jpg (http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTE1MDQyMjZzNDEzZGZkMzF5NTQx.jpg)



The camera takes better outside shots.[the pics will be better outside on the rocks] tomorrow when its not raining ill get pics on the rocks. What do to think?
...

[TwistedXT]

Here is some pics of my truck on the mini course in my backyard. Im going to add rocks to the mini course. I promise ill get more shots when i go to the RIVER. There are some great spots at the river.

AS YOU CAN SEE MY TRUCK IS BEAT UP!

http://img334.imageshack.us/my.php?image=p10100084kz.jpg



http://img403.imageshack.us/my.php?image=p10100066ff.jpg


http://img403.imageshack.us/my.php?image=p10100052ru.jpg

I couldn't resist, at first I contemplated saving $100 and just getting the smaller one, but I figured I have enough small stuff between my Tamiya Pajero and Tamiya F150. Plus I really wasn't looking towards having to do modifications right out of the box to get proportional steering and throttle. This will hold me off till spring so I'm not going through withdrawal to drive my real 1:1's. :lol:

I charged the battery overnight for 18 hours, 2 days ago. I've been running it on and off for several hours and it has no battery loss. :shock: How long do these things run for? My only complaint is that it isn't the updated chassis, but after owning a Tamiya Mountaineer, I know what buttons to push before I end up breaking stuff. :lol: So hopefully I won't break anything.

Anyway, here are some pictures from a confined part of my basement and a cheesy video I made on my first charge.

http://logikfive.myfirebirdweb.com/gallery/albums/userpics/10001/normal_100_6596.JPG
http://logikfive.myfirebirdweb.com/gallery/albums/userpics/10001/normal_100_6601.JPG
http://logikfive.myfirebirdweb.com/gallery/albums/userpics/10001/normal_100_6602.JPG

Eventually I plan to repaint the body w/ real automotive 2004 Ford Sonic Blue basecoat/clearcoat paint w/ a black interior and black rollbar.

Right now, all I have been working on (until my dremel died) is replacing the seats w/ ones that are more detailed and have seatbelts (thank the toy 1:6 New Bright Beetle I bought several years ago) I have to cut about half an inch off the bottoms of the seats to give them the correct height and angle so that they look good while inside.

http://logikfive.myfirebirdweb.com/gallery/albums/userpics/10001/normal_100_6642.JPG
http://logikfive.myfirebirdweb.com/gallery/albums/userpics/10001/normal_100_6639.JPG


Anyway, heres the 14.26mb video, that some have told me is pretty boring, but what can you do with limited room in a basement :-P Plus it has some cool in-cab footage. :-P

http://s94356474.onlinehome.us/videos/nylintjeep2.wmv


i finally found a setup that i am happy with the springs on. you will have to look at the link in my signature, every time i try to link a pic i just get red X's.

the last 15 pics are my current setup. in boarded rear springs, 10.25" wheelbase, mounted the front springs to the back of the grill( still working on the right width between the upper mounts on the front springs. cut up the body and the roll-cage my plastic welding skillz need some work, but it is holding together. now i just need a new paint job to hide my choppy work.

enjoy my pics, feedback and criticisms are welcome.

http://community.webshots.com/user/eksjae

Just got it the other day. Sorry for the crappy camera phone pics....


http://www.offroadworld.net/gallery/Ranovru/143591.jpg

http://www.offroadworld.net/gallery/Ranovru/143590.jpg

http://www.offroadworld.net/gallery/Ranovru/143589.jpg

http://www.offroadworld.net/gallery/Ranovru/143588.jpg

http://www.offroadworld.net/gallery/Ranovru/143587.jpg

http://www.offroadworld.net/gallery/Ranovru/143586.jpg



Plans are in sig. So far I've been really happy with it.



Jon

...

[merlin]

http://img304.imageshack.us/img304/7678/clevelandgtg025mw6.jpg
http://img143.imageshack.us/img143/8576/1002361nc1.jpg
http://img139.imageshack.us/img139/1084/1002360ic5.jpg

[dann06]

http://img329.imageshack.us/img329/4632/picture013mf7.th.jpg (http://img329.imageshack.us/my.php?image=picture013mf7.jpg)

http://img329.imageshack.us/img329/2299/picture007fw8.th.jpg (http://img329.imageshack.us/my.php?image=picture007fw8.jpg)

http://img329.imageshack.us/img329/8898/picture0022oz5.th.jpg (http://img329.imageshack.us/my.php?image=picture0022oz5.jpg)

[ruben91792]

Here are a few pics of my first rigs!

http://i172.photobucket.com/albums/w22/chapu-jeep/Crawler%20Pics/103_1731.jpg

http://i172.photobucket.com/albums/w22/chapu-jeep/Crawler%20Pics/103_1720.jpg

http://i172.photobucket.com/albums/w22/chapu-jeep/Crawler%20Pics/103_1716.jpg

http://i172.photobucket.com/albums/w22/chapu-jeep/Crawler%20Pics/crwlr1.jpg

http://i172.photobucket.com/albums/w22/chapu-jeep/Crawler%20Pics/crwlr2.jpg

[00TJ]

modeled after my 1:1
http://i78.photobucket.com/albums/j100/spike025/100_0342.jpg

http://i78.photobucket.com/albums/j100/spike025/Jeep3/100_0484.jpg

http://i78.photobucket.com/albums/j100/spike025/Mod%20Pics/100_0991.jpg

http://i78.photobucket.com/albums/j100/spike025/scorpion/100_0718.jpg

[nightcrawler]

modeled after my 1:1

http://i78.photobucket.com/albums/j100/spike025/Jeep3/100_0484.jpg

I really dig the olive drab jeep. Fawkin' sick!

[Mudskipper]

here's mine
http://i2.photobucket.com/albums/y12/the3cotes/jeepstrech001.jpg
http://i2.photobucket.com/albums/y12/the3cotes/jeepstrech003.jpg

[trailduster79]

Here's mine

Inboarded rear shocks
Some body mods
Tummy Tuck
O'ringed front, front belt on rear

Not really good pictures, but it is what I have

http://home-and-garden.webshots.com/photo/2185463010051540479ShDDAk
http://home-and-garden.webshots.com/photo/2508831700051540479WVmwBi
http://home-and-garden.webshots.com/photo/2876905160051540479mrfrPj

[taylor smith]

http://i131.photobucket.com/albums/p...Picture237.jpg (http://i131.photobucket.com/albums/p302/taylor1234_album/Picture237.jpg)
this is my new bright/nylint BUMMER CRAWLER.

[rubiconscottie]

Heres some pics of mine to date! nothing modded yet nervous to dig in.
http://i68.photobucket.com/albums/i30/behlert182/Crawler9.jpg
http://i68.photobucket.com/albums/i30/behlert182/Crawler5.jpg
http://i68.photobucket.com/albums/i30/behlert182/Crawler2.jpg
http://i68.photobucket.com/albums/i30/behlert182/Crawler1.jpg
http://i68.photobucket.com/albums/i30/behlert182/RockpileCrawler.jpg

[taylor smith]

This is my nylint with over sized tractor tires.
http://i147.photobucket.com/albums/r319/dsgsfghafdh/Picture264.jpg

heres a side pic
http://i147.photobucket.com/albums/r319/dsgsfghafdh/Picture266.jpg

[tjb]

Here's last summers project, still have yet to run it yet. all nylint parts, and screwed except for back end. (Gen 4 Chassis)
http://i50.photobucket.com/albums/f312/8170jay/25bc0e7d.jpg
http://i50.photobucket.com/albums/f312/8170jay/5.jpg
http://i50.photobucket.com/albums/f312/8170jay/3.jpg
http://i50.photobucket.com/albums/f312/8170jay/1.jpg
http://i50.photobucket.com/albums/f312/8170jay/2.jpg

[cammok5]

http://i86.photobucket.com/albums/k92/cammok5/jeep-1.jpg
http://i86.photobucket.com/albums/k92/cammok5/jeep1-1.jpg

[dcswindler4]

heres my custom tuber.

http://inlinethumb32.webshots.com/1951/2181889620096078257S425x425Q85.jpg (http://good-times.webshots.com/photo/2181889620096078257BclWmL)

http://inlinethumb50.webshots.com/2673/2797032240096078257S425x425Q85.jpg (http://good-times.webshots.com/photo/2797032240096078257UamWev)

http://inlinethumb53.webshots.com/2676/2794825690096078257S425x425Q85.jpg (http://good-times.webshots.com/photo/2794825690096078257rqpKtb)

http://inlinethumb13.webshots.com/204/2737631340096078257S425x425Q85.jpg (http://good-times.webshots.com/photo/2737631340096078257HQxprR)

[dcswindler4]

found this one of my 1:1, my stock 1:6 and my custom tuber 1:6

http://inlinethumb34.webshots.com/481/2265924730096078257S600x600Q85.jpg (http://good-times.webshots.com/photo/2265924730096078257XKSVPb)

[usa1man]

http://img.photobucket.com/albums/v226/usa1man/nylint/nylint017.jpg
http://img.photobucket.com/albums/v226/usa1man/nylint/nylint018.jpg
http://img.photobucket.com/albums/v226/usa1man/nylint/nylint011.jpg
http://img.photobucket.com/albums/v226/usa1man/nylint/nylint010.jpg

[FossilJunkie]

nothin real special, custome 4-link and crap New Bright body (temp.)
http://sore4x4.com/forum/userpix/230_5_1.jpg
http://sore4x4.com/forum/userpix/230_6_1.jpg
http://sore4x4.com/forum/userpix/230_7_1.jpg

[JRmudmanXJ]

heres my custom tuber.

http://inlinethumb32.webshots.com/1951/2181889620096078257S425x425Q85.jpg (http://good-times.webshots.com/photo/2181889620096078257BclWmL)

http://inlinethumb50.webshots.com/2673/2797032240096078257S425x425Q85.jpg (http://good-times.webshots.com/photo/2797032240096078257UamWev)

http://inlinethumb53.webshots.com/2676/2794825690096078257S425x425Q85.jpg (http://good-times.webshots.com/photo/2794825690096078257rqpKtb)

http://inlinethumb13.webshots.com/204/2737631340096078257S425x425Q85.jpg (http://good-times.webshots.com/photo/2737631340096078257HQxprR)

Build-up thread or more pics in a thread please

[dcswindler4]

sorry man, those are all the pics i have right now. i could try and get some more sometime soon when the weathers better

and i built this so long ago its hard to remember any details other than finding a few pics of 1:1 buggys like BTF and poison spyder chassis. trying to make it out of 1/4 steel rod, then figuring out how to get the axles under it. i didnt take any measurements or be super precise with the bending, just eyeballed everything.

[rustybudweiser]

Here's a couple pics of my 1/6 Special Edition Scorpion including one of it being towed on my custom trailer(not finished yet) and modified gecko chassied clodbuster. Mods on the nylint include:
stretched one screw on each end
Cut control arms stops
Suspension droop straps
Removed springs for more wheel travel compression/great help with COG
Working winch out of 1/18 jeep rear axle
Added sticky wheel weights to both axles
Two working wire tow cables

I'd like to do a tummy tuck, but i don't want the battery up in the body or anything because i like the full interior. That and i can't a F&F battery anywhere.
http://i160.photobucket.com/albums/t193/cummins_2500/DSCI0003.jpg
http://i160.photobucket.com/albums/t193/cummins_2500/DSCI0006.jpg
http://i160.photobucket.com/albums/t193/cummins_2500/DSCI0005.jpg

[jeepster711]

heres my jeep... it has inborded shocks in the back and thats all.


http://i87.photobucket.com/albums/k121/hondaguy711/DSCF0553.jpg


http://i87.photobucket.com/albums/k121/hondaguy711/DSCF0554.jpg


http://i87.photobucket.com/albums/k121/hondaguy711/DSCF0552.jpg



http://i87.photobucket.com/albums/k121/hondaguy711/DSCF0555.jpg


http://i87.photobucket.com/albums/k121/hondaguy711/DSCF0559.jpg

[Rc_Kid]

heres a couple pics of my 1/6 jeep

heres whats done to it

longer will base
cut tires/narrowd
cut body
better belts
cut cage
shocks rear without spring part

[crawlerb]

go here to see my crawler: http://picasaweb.google.com/bjytech/MyRockCrawler02

[celsiusprime]

here is my truck after paint, but before mods.
http://www2.propichosting.com/Images/450020624/1.JPG
Here it is after a few mods. Heh heh. Almost done.
http://www2.propichosting.com/Images/450020624/3.JPG
Finally done! Yes, those are Savage oil-filled shocks.
http://www2.propichosting.com/Images/450020624/4.JPG

[-BIGMAXX-]

heres a couple pics of mine, its been streched an inch 1/4, did a tummy tuck and trimmed the body a bit
http://i168.photobucket.com/albums/u194/llacdaddy/100_1302.jpg
http://i168.photobucket.com/albums/u194/llacdaddy/100_1285.jpg
http://i168.photobucket.com/albums/u194/llacdaddy/100_1284.jpg

[welder23]

here is my rig : triangulated shocks using a shelf braket , cut all 3 tabs out of the rear , did a tummy tuck used a cutting bored to close off the hole , put the front shocks on the back and the back on the front , cut the springs , put aluminum steer knuckles on the front and trimmed for better steering , relocated the battery over the front axel
33696

33697

33698

33699

33700

33701

33702

33703

33704

[intheworks]

http://i121.photobucket.com/albums/o221/intheworks/Picture001-2.jpg
http://i121.photobucket.com/albums/o221/intheworks/Picture025.jpg
http://i121.photobucket.com/albums/o221/intheworks/Picture002-2.jpg
http://i121.photobucket.com/albums/o221/intheworks/Picture003-2.jpg
http://i121.photobucket.com/albums/o221/intheworks/Picture004-2.jpg
http://i121.photobucket.com/albums/o221/intheworks/Picture005-2.jpg
http://i121.photobucket.com/albums/o221/intheworks/Picture006-2.jpg
http://i121.photobucket.com/albums/o221/intheworks/Picture007-2.jpg
http://i121.photobucket.com/albums/o221/intheworks/Picture008-2.jpg
http://i121.photobucket.com/albums/o221/intheworks/Picture009-1.jpg
http://i121.photobucket.com/albums/o221/intheworks/Picture021.jpg
http://i121.photobucket.com/albums/o221/intheworks/Picture022.jpg
http://i121.photobucket.com/albums/o221/intheworks/Picture016.jpg
http://i121.photobucket.com/albums/o221/intheworks/Picture017.jpg
http://i121.photobucket.com/albums/o221/intheworks/Picture018.jpg
http://i121.photobucket.com/albums/o221/intheworks/Picture019.jpg
http://i121.photobucket.com/albums/o221/intheworks/Picture020.jpg
http://i121.photobucket.com/albums/o221/intheworks/Picture024.jpg
http://i121.photobucket.com/albums/o221/intheworks/Picture023.jpg
http://i121.photobucket.com/albums/o221/intheworks/Picture015.jpg
http://i121.photobucket.com/albums/o221/intheworks/Picture014.jpg
http://i121.photobucket.com/albums/o221/intheworks/Picture013-1.jpg
http://i121.photobucket.com/albums/o221/intheworks/Picture012-1.jpg
http://i121.photobucket.com/albums/o221/intheworks/Picture011-1.jpg
http://i121.photobucket.com/albums/o221/intheworks/Picture010-1.jpg

[BLACKHOCK]

well we went out this weekend here a few pics

group shot
http://i44.photobucket.com/albums/f21/BLACKHOCK/ROCK%20CRAWLERS/101_0761.jpg
http://i44.photobucket.com/albums/f21/BLACKHOCK/ROCK%20CRAWLERS/101_0764.jpg

http://s44.photobucket.com/albums/f21/BLACKHOCK/ROCK%20CRAWLERS/th_101_0770.jpghttp://s44.photobucket.com/albums/f21/BLACKHOCK/ROCK%20CRAWLERS/th_101_0769.jpghttp://s44.photobucket.com/albums/f21/BLACKHOCK/ROCK%20CRAWLERS/th_101_0773.jpghttp://s44.photobucket.com/albums/f21/BLACKHOCK/ROCK%20CRAWLERS/th_101_0771.jpghttp://s44.photobucket.com/albums/f21/BLACKHOCK/ROCK%20CRAWLERS/th_101_0743.jpghttp://s44.photobucket.com/albums/f21/BLACKHOCK/ROCK%20CRAWLERS/th_101_0740.jpg
http://s44.photobucket.com/albums/f21/BLACKHOCK/ROCK%20CRAWLERS/th_101_0741.jpghttp://i44.photobucket.com/albums/f21/BLACKHOCK/ROCK%20CRAWLERS/101_0737.jpg

[Going Up!]

I have had this for about 7-9 months now, but never really posted pics. Here is my nylint...and a list of mods:

Narrowed body/Custom Cage
Custom body mounts
Cut tires
longer wheelbase mod

Other than the body, and some little odds and ends, it is stock.

Here are some pics!
http://img461.imageshack.us/img461/720/1004863oe2.jpg
http://img217.imageshack.us/img217/9289/1004864wg6.jpg
http://img217.imageshack.us/img217/3686/1004865bw2.jpg

[bigorange]

im new to the nylint world but picked up on the mods quickly and then added my own touch...let me know what you guys think....

http://i113.photobucket.com/albums/n215/coatney6211_2006/nylint3.jpg

[bigorange]

http://i113.photobucket.com/albums/n215/coatney6211_2006/nylint4.jpg

[bigorange]

http://i113.photobucket.com/albums/n215/coatney6211_2006/nylint2.jpg

[bigorange]

http://i113.photobucket.com/albums/n215/coatney6211_2006/nylint.jpg