RChover indoors, foxboro

[crunky]

i dont know if anyone is close to foxboro mass.
the gents are planning an indoor setup.

here is the conceptual art.
http://w3.bikepics.com/pics/2008/09/19/bikepics-1422165-full.jpg



no idea when it will be done, but i know jeremy is hot to get it done.
take a look at rchover.com, and they have a message board.

i just got off the phone with jeremy, and he is looking for ideas and input from guys with exp running on the rocks. he is willing to work hand and hand with any volunteers who would like to help design, or build this setup. he is hoping to have it fully setup to the likings of fellow crawlers, and hopefully have it rough enough to hold a few supports/ sponsored comps.
he's a really nice guy, and please go to his site and show your support/ interest on his message board. the more he see's guys wanting this, the quicker he will get to it.

[kona_joe]

This is has brought up a couple of times on our forum. We have a few members in that area interested in crawling inside."thumbsup" NERCC post link (http://nercc.net/index.php?topic=2316.0)

[crunky]

oh man i forgot all about that link.
thanks again man.

[LEROY]

when is this going to be complete i really want to go,ihave raced out doors there and it was fun,real nice people there,cant wait it will be cold real soon ."thumbsup"

[crunky]

well it was told to me by jeremy that they are starting the indoor carpet track next week, and will hopefully attacking the indoor climbing course shortly after that.

he is looking for exp guys to go over his ideas with him and tell him what you would like to see. so now is your chance to speak up and tell him what you feel makes a killer course.

they all sound truely enthusiastic over the whole thing. i know i am looking forward to a few runs with my sons up there.

if it works out he will sponsor comps guys.

this might mean freebies and incentives... "thumbsup"

i know my vote would be for a bit longer runs...

[The Eye]

Sweet ..........
looks like someone went to architecture school ... nice drawing "thumbsup"

[tac9227]

Ok, "the hill" is gonna start around Dec 1 the capet track is down and its a blast.. I think once the hill is done these is also talk of a flea market or swap meet sometime around Christmas.. I dont know about you guys but I have a few boxes of stuff to part with.

[U$edUpH00ker]

finally something cool in ma !! lol when its done ill be there my family live like 5 min from there so ill have an excuse :D

[860Crawler]

Looks like it will be fun. Foxboro is close enough for me to hit up "thumbsup"

[crunky]

i'm going to have to swing in there agian soon.

[LEROY]

"thumbsup"cant wait ,been there this summer to race outside,now to see the new crawler course,hopefully its done soon

[94line-xyota]

have they made any more progress with the course???

[prozak]

Any news ?? i live about 10 min from there... i know the carpet track is all done..

[crcoppens]

I was in there today and apparently they are still in the design phase of the indoor crawling course and met about it last night. It was the first time I had been to the store and it is really nice. Right now they are carrying some small amount of crawler stuff but will be carrying alot more once the course is done "thumbsup"

[MassCrawler]

I was in there today and apparently they are still in the design phase of the indoor crawling course and met about it last night. It was the first time I had been to the store and it is really nice. Right now they are carrying some small amount of crawler stuff but will be carrying alot more once the course is done "thumbsup"




Dont hold your breath on this..... unless its built for free by the ones who want it, other then that its a dead subject. sorry guys

Great job on the conceptual art though. Big thanks go out to Langdoodle

[horsinaround]

Dont hold your breath on this..... unless its built for free by the ones who want it, other then that its a dead subject. sorry guys

Great job on the conceptual art though. Big thanks go out to Langdoodle


Isnt the crawler course up and running now ?? It says friday nights at 5 on their website. I havent been in their to check it out for sure. Nice guys over there.

[Rocksolo]

Isnt the crawler course up and running now ?? It says friday nights at 5 on their website. I havent been in their to check it out for sure. Nice guys over there.

there is a small foam/wood setup but not much. It is open though.....a few guys hang out there on friday nites (races saturdays) not bad little session.... but not really worth a long drive. I was in there last friday nite abd thanks to Rusty"thumbsup"....my FXR was tuned just in time for the NERCC comp @ Lincoln woods sat. 4/18

[horsinaround]

there is a small foam/wood setup but not much. It is open though.....a few guys hang out there on friday nites (races saturdays) not bad little session.... but not really worth a long drive. I was in there last friday nite abd thanks to Rusty"thumbsup"....my FXR was tuned just in time for the NERCC comp @ Lincoln woods sat. 4/18


Iam thinking of going to start racing there on saturdays. Iam only like 10 minutes from them tops. I havent raced since i was a kid in the hi tech hobby days (if you remember that track ) . Iam putting my first crawler togther now. Do you go up there on saturdays ??

[crcoppens]

I'm thinking of heading there too for the stock slash class this summer.

[Rocksolo]

Iam thinking of going to start racing there on saturdays. Iam only like 10 minutes from them tops. I havent raced since i was a kid in the hi tech hobby days (if you remember that track ) . Iam putting my first crawler togther now. Do you go up there on saturdays ??

I personally dont race. I do go there and buy parts when I have to though; I also need Rusty from time to time, he is pretty good"thumbsup" when he is there:-(

I'm thinking of heading there too for the stock slash class this summer.

should be a good season.....they have a nice high stand built.
I have a VXL slash but its not legal to race in the class they run and I just traded my T3 for some crawler parts. And honestly I'd rather be deep in the woods crawling.;-)

[MassCrawler]

Rusty is no longer working there on account that he hasn't been paid for months and wasn't gonna continue with Jeremy's broken promises.



Good luck going there for racing now too. He has a guy that has no clue how to run the races.

[LEROY]

i heard that you left there and the new guy doing the races has no clue ,my buddy raced there about 3 weeks ago and said he would never go back, doesnt sound good in only the second year whith the track

[alpimax99]

Anyone know what is really going on with this??? I went to the store to get some losi Micro Baja parts, and noticed their little foam crawling set-up but didn't notice any thing good to crawl. Their little foam thing they had in the show room was definitely nothing special.

[MassCrawler]

guys a joke.

NUFF SAID on this subject, its dead....


PM me for details of locations of interest around the area.

[DRock9]

Too bad, just stumbled upon this thread but perhaps it was too late.

[brid96]

Hey Guys,

It is too bad that the course at RC Hover did not work out. However there is a course that is near completion at WickedRCRacing in Framingham. It is 13' x 16'. Carved foam core, and is going to be grouted next week. Planning on a December 5th grand opening.

Brian