Local "who has what" Thread

[Bottoms Up]

I hadn't seen one of these.... so i figured i would start one.


Who Has what ?
What have you done to it ?
Go into detail ?

I'll start I guess.

I have a pretty stock Ax-10 that i built from kit.
55t Integy, Rebel2
Rock Claws, with cut foams.
HR beadlocks, front 2 weighted.
Alum Shocks, super soft coils.
Upgraded Driveshafts, C's, Knuckles, Tierod, Bend Lower Links.
F150 Trophy Truck Body.

- A.J.

here is a pic of it when the body looked good haha.
im working on installing the new wheels, will get another pic after that.

Before...

http://www.myjunkinyourtrunk.com/albums/AX10/DSCF0856_Medium.sized.jpg

(edited) After... 8)

http://www.myjunkinyourtrunk.com/albums/AX10/photo.sized.jpg

[MdCrawler89]

Ax-10 Kit
Novak Rooster crawler ESC/Novak 55t
Rock Claws Cut foams
CKRC Stage 2 Kit
Modified Tmaxx shocks/HPI Super softs in front,Traxxas whites in rear
Stampede axles
Mirrored transmission
6cell split pack over axles plus a 2 cell lipo (run in parallel)
Custom triangle esc mounting plate over front upper links
Front tires have 7oz rears have 5oz
Jr XR2 radio and receiver on AM 27.095 ( so you know my freq.)
The belly clearance is exactly 2.5 inches,and the rig weighs just under 6 pounds
Things on order from TCS:Straight axle conversion,Tcs boomerang 4 link for the rear

I took off my aluminum plates and ram lighting that you guys saw at the GTG and put my Bug body back on. I changed it quite a bit since Saturdays GTG only because I didnt realize how top heavy it made the rig until I took it back off and moved everything lower,Now it crawls so much better since I focused on the CG of everything"thumbsup" Ill get a action pic up soon but dial up is not my friend:x

[B4wheeler]

Mine is a stock AX-10 built form the kit.. Wanted an ARTR, but they were not in stock and I could not wait...

Novak Rooster Crawler ESC
Novak Fifty Five motor
Futaba 3PM, 2.4Ghz Controller
Proline double beadlocks with FlatIrons (weighted heavy)
Stock Axial wheels with Losi Rock Claws (weighted light)
Stock shocks and coils
Bent lower links
Front and Rear steer
Old RC10GT body (blue - yellow)


Many changes planned - Wait and see :grin: :grin: :grin:

[broncoholic]

I have

ax 10
losi rock claws star cut foams
bent links
4 link plates
R2dig tranny
mamba max
45 turn motor
MIP CVD driveshafts
stock shocks w/soft springs
2- hi tec 645 servos 1 for steering one for dig
losi grappler body

axial cvd's, alum c's, alum knuckles and stronger steering servo comming soon.

clod based super

nn chassis
mamba max
2- hi tec 9555 steering servos
55 turn motors
TTR CVD's front and rear
TTR motor mounts
proline moab tires w/ star cut foams
proline double beadlocks
hot bodies threaded alum shocks
3 cell lipo
custom made servo mounts
alum lockers
and of course a yellow hpi bronco body:)

[Bottoms Up]

added my "after" picture to my original post.

[sjohn]

Mine is from a kit:
Novak Rooster Crawler with 55t motor
Moab tires-no foam, just air that is locked in there
Soft springs up front
FLM SPV2
Futaba 3pdf

That's about it. My next purchase will be new tires.

[youngblood]

Micro: SSMT axles 4ws, tuber, too much reduction.

Super: 15lbs. and 300:1 reduction... Its not for everyone...

Mini: I've got a Samurai MRC scaler in the works.

2.2: Changed a few things since this picture though.

Axial
Harley Hybrid chassis
VF dig
Brushless outrunner
5995TG steering servo
Mayhem BL's weighted front, no weight rear
Panthers for now, memory foams front and back
Not enough belly clearance, but it works.
HPI bug
http://www.zuwharrie.com/gallery/albums/userpics/12156/b_005.jpg

[bigdodge88]

Well, I guess I will be the first WK.

Stock WK with stretched wheelbase.

[Bottoms Up]

sorry if this is dumb question, but is WK = wheelie king ?

is it setup for crawling ?

[CronusTRD]

TLT axles with original sticky Moabs
55t lathe in a pede tranny
currently setup for droop on a cdw chassis.

I want to add dig and some better beadlocks.


http://i158.photobucket.com/albums/t97/champ7times/sugarloafgettogether134.jpg

[MDcrawler08]

ax-10 artr
pro-line m2 hammer tires
bent rear lowers
novak rooster ESC and 55t motor
TQ3 radio
2 cell lipo"thumbsup"
stock shocks(soft springs on the way)
I plan on getting a dig for it and i would love to find a bug body!

[AX10newbie]

AX10 built from a kit
losi shocks
proline hammer tires
lrp runner speed control
integy v11 65 turn
traxxas radio (tq2)

on the christmas list:
proline rims
losi tires
custom 4 link
tq3
dig

[bullet1231]

ive got a couple of supers both 1 is a 4 link 16 inch wheelbase
4ws
moabs
jp customs all around
thunder tech cvds
hitec high torque servos
proline wheels
moab xls
3s lipos
dual mamba max
CC bec

The other one is my pimpcane same specs but with 19inch wheelbase
DX7 radio

The berg
kamikaze 4.0
delrin HC links
Front and rear dig with mini hitec servo
mayhem 7's with panthers
hitec high torque servo
losi shocks
mamba max
CC bec

I have another clod 2.2 that im working on,but i dont know hat to do yet,lol

[bigdodge88]

sorry if this is dumb question, but is WK = wheelie king ?

is it setup for crawling ?

Yes, WK stands for Wheely King. And yes its set up for crawling with locked axles and 12.5" wheelbase. Its in the or sale section right now or trade for a Losi MRC(Mini Rock Crawler).

[champ7times]

high lift rooster crawler esc 55t motor every thing else stock http://i158.photobucket.com/albums/t97/champ7times/sugarloafgettogether153.jpg cr-01 stock build http://i158.photobucket.com/albums/t97/champ7times/models056.jpg