View Full Version : can u dig it?
gigercreeper
11-08-2008, 08:57 PM
has nyone set up a dig on these:?::?: i dont even know were to start
vltchkr
11-08-2008, 09:31 PM
Yes I have a rear dig. I will post my build thread as soon as the new body if ready. It was easy, added a NO switch between the Neg wire to rear motor.
Andrew
randy1
11-08-2008, 09:35 PM
u had to use a 3 chan. radio rite
gigercreeper
11-08-2008, 09:37 PM
cool glad to here it this thing dosent desend to well. did the switch lock the rear or just stop the power:?::?: i have a M8 three channel will that work
randy1
11-08-2008, 09:41 PM
yes it will work i think it just cut the power but im not sure we will have to let him tell
vltchkr
11-08-2008, 09:51 PM
It cuts power and will lock up the motor, that was with the stock motors, I haven't really tested it with the new colbolts.
Andrew
randy1
11-08-2008, 09:56 PM
cant wait to see it
gigercreeper
11-08-2008, 09:56 PM
i have the stockers in mine. how does it lock the motor:?::?: are your motors wires to the dual motor esc. or reg esc:?: also in series or in a paralell:?:
vltchkr
11-08-2008, 10:06 PM
It does not actually power lock, but these motors are geared low and to use it to crawl a tight corner or climb a steep rock it works good. I am using the Futaba 6EX with a Mamba Max with the drag break set to 100%
I will go ahead and take some pics tonight, since I have been saying this for weeks now....lol
Andrew
gigercreeper
11-08-2008, 10:22 PM
well thins is wat i found wth a little more research. i will also atemp if i can find the little black box to do so in
http://i148.photobucket.com/albums/s4/bluejeep91/ocm/OCMDig.jpg
Box
http://i148.photobucket.com/albums/s4/bluejeep91/ocm/DSC03535.jpg
http://i148.photobucket.com/albums/s4/bluejeep91/ocm/DSC03537.jpg
randy1
11-08-2008, 10:27 PM
that was all bought at radio shack
vltchkr
11-08-2008, 10:29 PM
Yes that diagram will lock the motors.
gigercreeper
11-08-2008, 10:41 PM
randy1 wat is the box from:?: vltchkr is this wat your setup looks like:?:
vltchkr
11-08-2008, 10:46 PM
randy1 wat is the box from:?: vltchkr is this wat your setup looks like:?:
No I just have the switch between the neg. When I hit the switch I cut the circuit to the motor
gigercreeper
11-08-2008, 10:54 PM
i dont have that second servo on mine sience i locked the rear and that is the new home of one of my hump packs
randy1
11-08-2008, 10:58 PM
the box come from the shack as well
gigercreeper
11-09-2008, 08:27 AM
thakns im gonna go there today and pic them up
vBulletin® v3.8.4, Copyright ©2000-2010, Jelsoft Enterprises Ltd.