Setting up the DX7 Transmitter for Throttle on right stick

[concepts]

Hello there!

Got the RF built and have it running with the DIG 3 position switch in the flaps.... Its really fun by the way! The only problem I have is that I need to phyically move the stick to center and hold it there for a second before I can go in reverse. I would like to be able to use my right stick for forward and reverse as well as turning. Does anyone know what to do in this situation? I'm using a Mamba Max ESC...is there a programing area where I can change the time it takes to recognize zero position?

Thanks for the help

Jimbo

[dkingston]

Hello there!

Got the RF built and have it running with the DIG 3 position switch in the flaps.... Its really fun by the way! The only problem I have is that I need to phyically move the stick to center and hold it there for a second before I can go in reverse. I would like to be able to use my right stick for forward and reverse as well as turning. Does anyone know what to do in this situation? I'm using a Mamba Max ESC...is there a programing area where I can change the time it takes to recognize zero position?

Thanks for the help

Jimbo

My first thought is that in the Mamba Max software there is a setting for Brake/Reverse Type. If set to proportional:

Proportional w/ Reverse Lockout
For bashing or racing (may not be an allowed setting for racing). The controller must see 2 seconds of steady neutral throttle before it will allow reverse operation.

Change that to Forward to Brake To Reverse. That should fix it. "thumbsup""thumbsup"


- David

[concepts]

Thanks David, that worked great. By chance, is there anyway to rig it with the right (elevator) stick throttle? I won't be doing it, just wondering if its possible.

Thanks again

[e-hills4x4]

plug the esc into the elevator slot on the reciever and recalibrate

[concepts]

I was thinking maybe I would try that, but I thought that the "power" had to be in the throttle channel.

Thanks!

By the way, maybe I can get another answer: How can I set up the dig with a DX3 with 3 positions?

Thanks again

Jimmy

[dkingston]

I was thinking maybe I would try that, but I thought that the "power" had to be in the throttle channel.

Thanks!

By the way, maybe I can get another answer: How can I set up the dig with a DX3 with 3 positions?

Thanks again

Jimmy

e-hills was dead on.

I am not sure about setting up the dig on the DX3 since I haven't played with one. Maybe someone else who has one can chime in!


- David

[BILLYGOAT]

is it a dx3.0 or dx3r?

[concepts]

Its a DX3.0

Thanks Billygoat!

Jimmy

[BILLYGOAT]

looks like 2p is your only option. looks like grip switch c is a good option for a 2p(4wd and dig no freewheel).

[concepts]

Thanks for the info!

jimmy