Mayhem Eng. 1.9 CDP

[Mayhem Eng.]

Mayhem Eng.

1.9 CDP Beadlock Wheels

92936

Wheel Spec.
1" wide
.375 (3/8") offset

Wheel weight - empty 4.1 oz
Wheel weight - 1/2 loaded 4.9 oz (4 - 7/16" bearings)
Wheel weight - loaded 5.4 oz (7 - 7/16" bearings)

One Set of 1.9 CDP
includes
4 rims
8 beadlock rings
4 weight covers
80 2-56 ss screws
28 bearings

Rings and weight covers available in
machine finish, blue, gold, black, or red anodize

Rims available in machine finish only!!

$125.00 + shipping

Pre-Orders being accepted now
ETA 2/20/09 if ordered by 1/30/2009



THANK YOU!!! Nluvwithxlr8ing the weight cover is his design

92934

89811

92935

89818

89819

89820

89821

89822

89823

89824

89825

89826

89827

89831

89832

92937

92938

92942

92941

92940

92939



89828

89829

89830




pm or email for order info
mayhem_eng@yahoo.com

[2JSC]

VERY COOL! Although I would like to see the center bolts to be 5 instead of 4. When I first looked at it I instanty thought "Honda" for some reason. But I really like it!

[Hurley0706]

Very nice "thumbsup"

How about some lexan rings :?:

[axman2010]

Awesome idea with the weight covers!! Do this to your double phattys! That was the deciding factor between buying your rims and the vanquish ones I did buy. I didnt like the fact I had to remove the entire ring to add/subtract weight. (I HATE ASSEMBLING BEADLOCKS) lol

[-w-designs]

Looking mighty fine there Dan!.......damn I need to get you a painted body for your pics. Come by next Monday and I'll have it finished. ;-)

I personally like the blank inner ring versus the Nluv version (no offense Nluv)

Those are going to look SICK on my Mayhem Engineering Bronko "thumbsup"

[Just Zach]

I really like them. Nice job as always"thumbsup"

[Badd]

very nice "thumbsup"

[XJ Farmer]

Sweet"thumbsup" I've been holding out for these and I'm glad I did. Great job Mayhem.

Later
Farmer

[bRIBEGuy]

Nice!

PM Sent.

[The Eye]

Holly cow, thoughs are sweet .... as always nice job "thumbsup"

[yukon635]

Nice job on the new wheels Mayhem "thumbsup"

[STANG KILLA SS]

:shock: sweeeeeeeeeet dan!

hopefully PP doesnt have a cap, cause these are gonna put ya close. :lol:

[BILLYGOAT]

those look nice. i like the middle ring comes out seperate . that was the only issue i have with my 2,2 dp is all the screws to change the weight. nice work.

[eric113]

Awesome idea with the weight covers!! Do this to your double phattys! That was the deciding factor between buying your rims and the vanquish ones I did buy. I didnt like the fact I had to remove the entire ring to add/subtract weight. (I HATE ASSEMBLING BEADLOCKS) lol

X2 They look sweet!! If you did this I would pick up few sets of both 1.9 and 2.2.

[WarTrader]

Your right bro I needed to wait. You have far outdone my expectations! Incredable as ever.

[JOOTZ]

2.2 on rockforce offset ?

[frdtrkguy]

Those look cool;-)

[RoCk SkuLLz]

Very Nice Work Dan!!!!

Killer design. Looks like you can swap out the weights quick and easy for comp use. "thumbsup"

[Offroader5]

Those are sweet. I like how the covers can be reversed so you can run one side in the rocks, and then switch them around to have some nice unscratched faces to look good in pics "thumbsup"

[clarkrw3]

VERY cool design! So when are you going to start anadizing in Orange??

[jeepcj578]

look good, i like the fact you dont have to take the beadlock ring off.
great design"thumbsup"

[Brandon]

Nice job! Didnt see that coming on the 1.9 design "thumbsup"

[Mayhem Eng.]

It's all your fault........"thumbsup"


Nice job! Didnt see that coming on the 1.9 design "thumbsup"

[bcrofts]

nice job the wheels look great "thumbsup"

[Rpp Hobby]

Very nice "thumbsup" Check your PM Order coming :mrgreen:

[finishline]

sssssiiiiicccckkkk!!!!!!!

[Brandon]

It's all your fault........"thumbsup"

Its nice to be good for something :ror:

I love the slots on the weight ring and the the all black look. Great job "thumbsup"

[moabax]

Man I just got my 2.2 DP from you now I have to send you more money for these!!! Great job with Nluv's idea for the ring!!!!"thumbsup"

[swell searcher]

love the design guys!!!! makes swapping weights 10x easier, so when do the 2.2 versions come out!!!

[Mayhem Eng.]

A lot of people asking for that. We will look in to it. Thanks for all the support"thumbsup"



love the design guys!!!! makes swapping weights 10x easier, so when do the 2.2 versions come out!!!

[StIcK kInG]

Those are pimp as al hell!! Nice job Dan!"thumbsup"

[BOWTIE]

sweet wheels guys!!!! great job!!!!!!!

[CreepyCrawl]

Brilliant design...those are dope "thumbsup"

[twistedone]

VERY NICE.....I wish I would have waited I am thinking i will wait for 2.2's and then they all will be new and match
I need:
3 sets of berg offset 2.2 cdp's (me and the son's)
1 set of 1.9 cdp's

let me know when they are ready to order"thumbsup"

[WarTrader]

Woot Mine are ordered! Now let me say dealing with Mayhem is a great experience great company very freindly! Now the waiting begins ....... My postman is gonna think I'm stalking him .....

[Knytemare]

Those are hot! Love the design!

[big geo]

you need a better hand model lol:ror::ror:

[Mayhem Eng.]

A$$ Hole...........:flipoff:


you need a better hand model lol:ror::ror:

[raceplus]

i can't tell from the pics--with the weight covers-are they smooth on one side and ribbed on the other? Or do you pick either smooth or ribbed?
These look sweet!

[Mayhem Eng.]

We will have four or five different designs on the weight covers. So far all we have posted is the smooth face and spoke look. You can flip them around for a different look but only one side is c'bored for the screws.

Thanks



i can't tell from the pics--with the weight covers-are they smooth on one side and ribbed on the other? Or do you pick either smooth or ribbed?
These look sweet!

[Hurley0706]

We will have four or five different designs on the weight covers. So far all we have posted is the smooth face and spoke look. You can flip them around for a different look but only one side is c'bored for the screws.

Thanks

If you put the spoked look to the inside wouldn't the BB's roll irregullarly though?

[Mayhem Eng.]

Your right on the spoke design. Thanks"thumbsup"




If you put the spoked look to the inside wouldn't the BB's roll irregullarly though?

[Hillcrawler]

I would love to have a set of these, but just don't have the money right now.

[Hurley0706]

Your right on the spoke design. Thanks"thumbsup"

I can't see it being a big deal, they look cool as is no need to be picky :lol:

The quick change is a HUGE plus in my eyes.

[Mayhem Eng.]

The flipping of the weight cover came from a post in this thread, I hadn't even thought of flipping it and was addressing his idea of ya you could. Hey we will take all the input we can to help make a better wheel or ring or what ever. So if it doesen't sound right or look right let us know.

Thanks Mayhem Eng.



I can't see it being a big deal, they look cool as is no need to be picky :lol:

The quick change is a HUGE plus in my eyes.

[HC Rc Guy]

Dan, I'm thinking smooth cover, and engraving.......oh yeah!"thumbsup"

Being able to leave the tire seated is a huge plus.

[Mayhem Eng.]

The problem with the engraving is not enough area to small.



Dan, I'm thinking smooth cover, and engraving.......oh yeah!"thumbsup"

Being able to leave the tire seated is a huge plus.

[WarTrader]

Dan I noticed you posted your going to be making more weight cover designs.

The first thing that comes to mind is something like your grinder rings. If you could drill some of the holes at the edge (joint where the wieght cover meets the ring) semi circle like, it should let any dirt that gets in get back out.. Might be a good answer for a wet course ?? You could prolly play with the hole spacing to keep a flat area to let the bearing roll smooth! Just an idea!

Not to mention it would prolly look pretty hot with a machine finish wheel, bearings, and a anodized wieght cover!

I'll just sit here quietly now and wait for the next thing your gonna create
and make me buy.

[Mayhem Eng.]

I have something like that in the works. Thanks for the ideas."thumbsup"

[WarTrader]

Np prob not like you need my help lol

[-w-designs]

I was meaning to ask what is the overall width of your truck with the CDPs and the losi tires? Do you still have the stock plastic hexes on it?

Thanks Dan ;-)

[WarTrader]

Ok I gotta ask not meaning any pressure or anything... Just wondering how production aka my order is comming I know you said two weeks. I'm trying really hard to be patient here but ... well ...

[Mayhem Eng.]

All orders for the 1.9 cdp will be going to the plater on Wednesday and start shipping on Friday.

Thanks.

[WarTrader]

Ohh TYVM Now I'll leave you be for at least a week LOL

[Mayhem Eng.]

I might ship yours way of china.......:shock:


Ohh TYVM Now I'll leave you be for at least a week LOL

[conejo]

Woot, just ordered mine.

Red Beadlocks, black weight covers.

Rich C.

[WarTrader]

I might ship yours way of china.......:shock:


My wife might like that.

[CRAZYACE63]

any idea if you will anodize in orange? I know it was asked before but I didn't see an answer. Are these ready to ship or is it an order and wait still? I would like a set of these but would rather wait for your answer.

[Mayhem Eng.]

I have 28 sets sold that will start shipping I hope Friday. I hate to say it but there is still a wait. No orange.......



any idea if you will anodize in orange? I know it was asked before but I didn't see an answer. Are these ready to ship or is it an order and wait still? I would like a set of these but would rather wait for your answer.

[CRAZYACE63]

I have 28 sets sold that will start shipping I hope Friday. I hate to say it but there is still a wait. No orange.......


No prb on the wait. I thought orange would look good for some of the Axial Artr guys. I have a set of DP gold and black delrin and they are the best I have had in awhile. I will have to hit you up when I get my MRC up and going. Thanks again.

[conejo]

I have 28 sets sold that will start shipping I hope Friday. I hate to say it but there is still a wait. No orange.......

Are mine one of the 28 planned to ship on Friday?

Thanks,

Rich C.

[Mayhem Eng.]

pm sent - Thanks Mayhem

Are mine one of the 28 planned to ship on Friday?

Thanks,

Rich C.

[Locked Up]

Any update on the weight cover designs?

I would like to order in time to make the giveaway but I'm holding out to see what other cover designs you come up with.

[Mayhem Eng.]

We will be having a customer drawing every month going forward. You have 6 more days on this drawing. I will have some new designs out here soon on the weight covers. Here are some fresh pic's

92946

92947

92948


92949

[WarTrader]

hrmm looks like I may be annoying you some more in that case

[Hurley0706]

That's a great looking combo, nice job "thumbsup"

[CRAZYACE63]

Figured I would get a set. PM sent. Those are sweet. Nice pics of the different colors.

[-w-designs]

Well I got my 1.9 cdp's all mounted up. I took some pics of the air hole mod I did as well as the weight of the front and rear. The front has a full load of bearings and the rear is half full. The Flat Irons are stock with stock memory foams.
http://i71.photobucket.com/albums/i126/w-designs/022708006.jpg
http://i71.photobucket.com/albums/i126/w-designs/022708009.jpg
http://i71.photobucket.com/albums/i126/w-designs/022708012.jpg
http://i71.photobucket.com/albums/i126/w-designs/022708020.jpg
http://i71.photobucket.com/albums/i126/w-designs/022708022.jpg
http://i71.photobucket.com/albums/i126/w-designs/022708030.jpg

The wheel are top notch and work so much better than the stock wheels I had. 8) I'll run em this weekend at the Nor-Cal comp......can't wait to scratch them up.

[WarTrader]

Ok quick question here on these. Do the air holes really help? I've not really noticed any problems with tire bouncing.

If it is a big help what size should I try and how many should I make one or two??

Been wondering this for a litlte bit.

[CRAZYACE63]

I would think that putting a hole in will help flatten out the tire also. I know on my 2.2 CDP's they hold a fair amount of air when all sealed up. I am probably gonna do this on both sets.

[-w-designs]

It's just a personal preference.....I like the tire to squat and grip and it does it better if it can breathe. The nice thing about this mod is you can try it and if you don't like it you just put the screw back in and your sealed up again. "thumbsup" I just drilled an 1/8 hole in one spot.....seems to be enuff.

[swell searcher]

Dan, any luck with my tracking number?

BTW, your mailbox is full...

[WarTrader]

Well dan any new weight covers in the pipeline yet ???

I have had some time to run these wheels and really put them through their paces! I have to say I was really impressed when I got them but I'm even more so now! I've even been running in sand and I've not had any probs with debris getting into the wheel. Great product soo soo glad I waited for them.

Now I'm going to bite the bullet and build a nice little scaler. Hrmm gonna have to take a look and see what set I'm gonna bug you to death about next!!

[THAT1GUY]

Any sets ready to ship or is there still a wait ?

[Mayhem Eng.]

Any sets ready to ship or is there still a wait ?


I have about 4 or 5 sets ready to go, Let me know what colors you are looking for that would be the only hold up.

[Etype R]

What is the overall track width on the losi mini rock crawler with these rims? The flat irons need a good amount of clearance :)

[Mayhem Eng.]

What is the overall track width on the losi mini rock crawler with these rims? The flat irons need a good amount of clearance :)

7 1/4 bone stk.

PM sent."thumbsup"

[CRAZYACE63]

Got mine yesterday and they mounted up perfectly. I wish I had a .050 allen bit for my driver. The allen I have now is getting pretty bad so I will get one and make the job that much easier. MAyhem the shirt looks great and these wheels are awesome. I will get some pics of them mounted in the next day or so. With flatirons they are holding the bead perfectly. I pull on them as hard as I can and they stay together.

[Mayhem Eng.]

Got mine yesterday and they mounted up perfectly. I wish I had a .050 allen bit for my driver. The allen I have now is getting pretty bad so I will get one and make the job that much easier. MAyhem the shirt looks great and these wheels are awesome. I will get some pics of them mounted in the next day or so. With flatirons they are holding the bead perfectly. I pull on them as hard as I can and they stay together.


Cool, on the weight covers you asked about I will have some different ones soon. Thanks for the order."thumbsup"

[JPH Racing]

What is the overall track width on the losi mini rock crawler with these rims? The flat irons need a good amount of clearance :)

I use the Losi MRC aluminum hexes and some thin traxxas (1/8"?), to push the width out another 1/4" or so. It really helps with the Flat Irons!

Awesome rims Mr Mayhem! "thumbsup"

[CRAZYACE63]

Cool, on the weight covers you asked about I will have some different ones soon. Thanks for the order."thumbsup"

Cool can't wait to see the different designs that come out of the MAyhem Camp. I always like to have choices to make teh rig stand out at different comps. I will def. check on these when they are up.

[Mayhem Eng.]

I use the Losi MRC aluminum hexes and some thin traxxas (1/8"?), to push the width out another 1/4" or so. It really helps with the Flat Irons!

Awesome rims Mr Mayhem! "thumbsup"


Thank you sir.

[THAT1GUY]

Just ordered a set, Can't wait to get them and mount'em up !

[dwobs]

Any update on the new designed plates?

[Mayhem Eng.]

I will have a couple of new designs on Monday."thumbsup"

[dwobs]

Awesome news, can't wait. I've been waiting to order so I can get the new stuff.

[WarTrader]

"thumbsup"

[CRAZYACE63]

I know you have been swamped but any news on new pics of the plates. I want to see what I am using my paycheck on. "thumbsup"

[CRAZYACE63]

Just one more bump for the new bearing plate designs. I was thinking what about haveing a set that had a biohazard logo on them. Would look good anyway you looked at it. Also how about getting some anodized and then machining them so the logo has the color and the plate is silver. I would def. pick up a set of gold ano'd bio's as soon as they were released.

[WarTrader]

:roll: Any word on anything yet?

[Mayhem Eng.]

I will have two new designs on the weight cover next week. I have a new 1.9 wheel in the works right now. It's actually on the machine now, hope to have pic's by Saturday if not sooner."thumbsup"

[joesbruiser]

Thought I would post up and say I received a set in the mail today.
I really,really ,really like this design.I also could not belive how easy my cut down Cougars mounted up.
Top Notch as always
Thanks Mayhem"thumbsup"

http://i90.photobucket.com/albums/k252/sbcmustang/Tylers%20mini%20GC2/MRC006.jpg

[WarTrader]

I will have two new designs on the weight cover next week. I have a new 1.9 wheel in the works right now. It's actually on the machine now, hope to have pic's by Saturday if not sooner."thumbsup"


Sorry to be a pest bro but as we have established my whole patience issue..... but really it's your fault if you'd just stop making such cool stuff!!!

[WarTrader]

any news on the new covers?? I'm in the market for another set of 1.9's and I just wondering what the new covers will look like to see if they will/can work for my build.

[Mayhem Eng.]

I got a few things to get done and I promise Monday to have at least two different designs for you. Or if you have something in mind let me know.



any news on the new covers?? I'm in the market for another set of 1.9's and I just wondering what the new covers will look like to see if they will/can work for my build.

[CRAZYACE63]

I got a few things to get done and I promise Monday to have at least two different designs for you. Or if you have something in mind let me know.


Did you see the Idea I had up a few posts? If not check it out. Def. will be looking at these new designs to see which way I will go. I am gonna get some of these wheels again but need the covers before the decision. I will be checking in on this as much as I can monday. Then maybe an order will come your way.

[CRAZYACE63]

Just doing the weekly checkup.

What kinds of designs won't work with the covers? I like my Idea of the Biohazard symbol done after plating. Have the symbol raised with color and the rest of the cover silver. If this can be done I need another set of Wheels for the new MRC.

[Mayhem Eng.]

Send me a pic of your idea. I dropped some extras in the black plating box just for you.....



Just doing the weekly checkup.

What kinds of designs won't work with the covers? I like my Idea of the Biohazard symbol done after plating. Have the symbol raised with color and the rest of the cover silver. If this can be done I need another set of Wheels for the new MRC.

[CRAZYACE63]

Send me a pic of your idea. I dropped some extras in the black plating box just for you.....


Did you get the pic I sent? I am still waiting on my brother to finish the actual drawing. We were both looking at the size and design so it might work. LMK. I still need another set of these for the DS build. I am thinking bare outers and blue covers. Any update on the new designs?