Vanquish Products Rockforce 335 hexes

[tom@vp]

We got some of the new rockforce hubs instock now. they take about 3/4 inch off the trackwidth. billygoat who helped greatly in the design has been testing them and has been very pleased. his post is here, post 64 show his new track width. :shock:

These will be up on the web site in a few hours

http://www.rccrawler.com/forum/showthread.php?t=151856&page=4

[rockdevil]

nice

[dkingston]

Muy Bueno "thumbsup""thumbsup""thumbsup"


- David

[JOOTZ]

those procomp DH are hawt.

[Tanis]

with these hubs we can use any vanquish 2.2 beadlock ?
Just the DH Procomp ones, as they have the interchangeable hex;-)

[JOOTZ]

Just the DH Procomp ones, as they have the interchangeable hex;-)

edited my post, jumped the gun/LOL

[BILLYGOAT]

Just the DH Procomp ones, as they have the interchangeable hex;-)


dang tanis your on it, the pro comp's are the only way to go. and these offsets put you right in the middle of berg width. i am very please with the fit and decrease in track width. a must have for a competitive Rock force.

[bRIBEGuy]

Hmmm, couldn't seem to find these new hexes on the Vanquish site.....

:(

[BILLYGOAT]

Hmmm, couldn't seem to find these new hexes on the Vanquish site.....

:(

ill let them know and pm you when they are up. thanks...john

[dave56bug]

Dang those are nice wheels, and those brass shell casing weights omg!

Now i gotta go sell a kidney on the black market or something to get a set.

[BILLYGOAT]

a kidney for a set of wheels and some bullet weights? i f i need a kidney someday ill take it:lol::lol::lol::lol:

[dave56bug]

Well their well used, I figured their not worth all that much. :-P

[wrightcs77]

Dang those are nice wheels, and those brass shell casing weights omg!

Now i gotta go sell a kidney on the black market or something to get a set.

I bought 2 sets when MS Live was offering cashback. 30% cash back on these rims....so $150 shipped with 3 sets of weights....not bad. I wish MS would bring back the cash back!

[tom@vp]

Hmmm, couldn't seem to find these new hexes on the Vanquish site.....

:(

added some info should be more clear
http://www.vanquishproducts.com/dh-procomp-hex-spacers.html

[quickster47]

Well, I've been waiting for these so I just ordered me another set of the DH wheels and the Rock Force spacers.

Great job Vanquish!"thumbsup""thumbsup""thumbsup"

Carl

[wrightcs77]

Can't wait to hear how narrow this can make a Berg rear axle.

Simple yet innovative thinking.....I like 'em!

[4XADICT]

[QUOTE=wrightcs77]Can't wait to hear how narrow this can make a Berg rear axle. [QUOTE]

About 9.5"ish .

[BILLYGOAT]

mine will be here in hrs now. ill post as soon as i have them in hand!!!

[killjoyken]

Can't wait to hear how narrow this can make a Berg rear axle.

About 9.5"ish .

Huh? These are for the RF, not the berg. Where did you get 9.5"?

[dave56bug]

Pretty sure these won't fit the Berg, they are specifically made for the RF's 8mm axle and 6mm thread.



Measuring from the outside from beadlock to beadlock, the following spacers will acheive certain trackwidths when bolted to the DH ProComop Wheel. Measurements are in inches

335 = ( Axial-9.25 )(Berg-10.00)(Rockforce-10.75 with wheel hex )

460 = (Axial-9.5)(Berg-10.25)(Rockforce- 11.00 )

585 = (Axial-9.75)(Berg-10.50)(Rockforce-11.25 )

335RF = (Rockforce 10.25, removes stock 12mm wheel hex.)

[BILLYGOAT]

they are specific for the rock force, i did the fitting and testing on them. never hurts to try them out and see though.


Pretty sure these won't fit the Berg, they are specifically made for the RF's 8mm axle and 6mm thread.



Measuring from the outside from beadlock to beadlock, the following spacers will acheive certain trackwidths when bolted to the DH ProComop Wheel. Measurements are in inches

335 = ( Axial-9.25 )(Berg-10.00)(Rockforce-10.75 with wheel hex )

460 = (Axial-9.5)(Berg-10.25)(Rockforce- 11.00 )

585 = (Axial-9.75)(Berg-10.50)(Rockforce-11.25 )

335RF = (Rockforce 10.25, removes stock 12mm wheel hex.)

[dkingston]

Here are the 335's mounted. Man, these are nice!

http://i4.photobucket.com/albums/y140/dkingston/KyoshoRockForce/vp1.jpg

http://i4.photobucket.com/albums/y140/dkingston/KyoshoRockForce/KRF3-1.jpg

http://i4.photobucket.com/albums/y140/dkingston/KyoshoRockForce/KRF5-1.jpg


- David

[Rckcrwlr]

Oh man are they sweet...wish I would have seen that rig at Motorama, David... :evil:

Time to save some funds...

Thanks VP

[dkingston]

Oh man are they sweet...wish I would have seen that rig at Motorama, David... :evil:

Time to save some funds...

Thanks VP

HAHAHA your ears must have been burning when you posted that!

Just got off the phone with Mark Pavidis, he said that the crawling event at Motorama was AWESOME and it was great to meet you! He then went on to tell me that you were kind of a punk, but I didn't buy that.... BWAHAHAHAHA j/k.

Our paths will cross this year, for sure.


- David

[Rckcrwlr]

HAHAHA your ears must have been burning when you posted that!

Just got off the phone with Mark Pavidis, he said that the crawling event at Motorama was AWESOME and it was great to meet you! He then went on to tell me that you were kind of a punk, but I didn't buy that.... BWAHAHAHAHA j/k.

Our paths will cross this year, for sure.


- David

Off topic but did he tell you where we finally ran into each other... :oops:

[EeePee]

Off topic but did he tell you where we finally ran into each other... :oops:

Adult bookstore huh? :ror:

No no! Gay bar!?

[Rckcrwlr]

Adult bookstore huh? :ror:

No no! Gay bar!?

You weren't even there and you knew the answer...


Oh wait...

:flipoff:

[EeePee]

:D

The message you have entered is too short. Please lengthen your message to at least 3 characters.

Ooops, I forgot this: :flipoff: