FELSENFEST AX10 spools (locker)

[EGRESSor]

these are zero slop spools for your AX10 ;-)
adjustable for Axial shafts/cvd´s and all aftermarkets
spool is made of 7075 , with 5mm set screws

http://i69.servimg.com/u/f69/11/99/05/64/p1010935.jpg

http://i69.servimg.com/u/f69/11/99/05/64/p1010936.jpg

price is 20€ per pair + 10€ shipping

just send your payment in € (EURO) to
felsenfest@sarrazin-mv.de

members within the EU need to add the german VAT 19%

more info about the spools (http://www.rccrawler.com/forum/showthread.php?t=164577)

[EGRESSor]

http://i89.servimg.com/u/f89/11/99/05/64/p1011111.jpg

they are ready to send out ;-)

[EGRESSor]

a pic that shows the wear of a shaft that runs in steel locker for 5 packs

http://i79.servimg.com/u/f79/11/99/05/64/p1011110.jpg

the assembly is easy
you may drill a hole in your axle housing, around 4mm in diameter

http://i79.servimg.com/u/f79/11/99/05/64/p1011111.jpg

first screw in the 4 set screws with medium threadlock and pre adjust them
bolt on the spool to your ring gear
assemble the axle
and tie up the set screws with a 2.5mm ball tip hex wrench

http://i79.servimg.com/u/f79/11/99/05/64/p1011112.jpg

http://i79.servimg.com/u/f79/11/99/05/64/p1011113.jpg

ready "thumbsup"

[run2jeepn]

Nice... Wish I still had an Ax-10. With all the goodies you have coming out now..:)

[EGRESSor]

Nice... Wish I still had an Ax-10. With all the goodies you have coming out now..:)

i think you will buy one after my torquetwisteliminator is done :lol:

[JeremyH]

Wow, these spools are nice and the no slop design is perfect! Here are some pics of my setup:
http://i171.photobucket.com/albums/u287/z_hansenjm/RC/Axial1/P1010686.jpg
http://i171.photobucket.com/albums/u287/z_hansenjm/RC/Axial1/P1010691.jpg
http://i171.photobucket.com/albums/u287/z_hansenjm/RC/Axial1/P1010692.jpg

I'll have some runtime on these spools this weekend, but I can say that the "no slop" design is ingenious....and so simple!

[bob1961]

how much is this in us funds "thumbsup" ...............bob

....

[bob1961]

i did a exchange using euro if that is what you use and it came to just under 40 bucks us for a pair with shipping....nice price "thumbsup" ....i'll be in touch with an order soon ;-) .............bob

....

[EGRESSor]

i did a exchange using euro if that is what you use and it came to just under 40 bucks us for a pair with shipping....nice price "thumbsup" ....i'll be in touch with an order soon ;-) .............bob

....

25 pairs are instock "thumbsup"

for exchange
http://www.xe.com/
or calculate it at paypal

[activethunderrc]

Bob
we'll each get a set - might be cheeper on shipping for us if we order together

[barbaricboye]

25 pairs are instock "thumbsup"

for exchange
http://www.xe.com/
or calculate it at paypal



any still left?
does it come with the set screw?
so $25Euros for 2?(yeah, Im pretty sure pair means 2)
$10Euros ship to US?

how bout an update JeremyH?

thanks, probably HAVE to try these out.

[EGRESSor]

they come with set screws
the price is 20 euro per pair (2 spools with all the screws)
shipping is 10 euro (for up to 6 pairs)
it needs 5-10 days from Germany to the US
and i have some pairs in stock"thumbsup"

just send your payment to felsenfest@sarrazin-mv.de
the most parts will be send the same or next day

[dieselfuel]

excellent design! if i had an AX10 i'd definitely buy a set of these.

[barbaricboye]

just ordered a pair of these, cant wait......8)

[JeremyH]

how bout an update JeremyH?
Absolutely NO ISSUES so far!!!"thumbsup"

[EGRESSor]

just ordered a pair of these, cant wait......8)

i will send them today or monday"thumbsup"

[Robbob]

Absolutely NO ISSUES so far!!!"thumbsup"


Good to hear. Mine are sitting at the post office waiting for me "thumbsup"

[The Cracker]

Egressor, do you still have these in stock?

[EGRESSor]

Egressor, do you still have these in stock?

yes;-)

[MadForce]

I bought these from Christian two weeks ago along with a cobalt motor. After I installed the motor I broke the outdrives, a dogbone, a Ti pin in the driveshaft, rounded both stock green spools and then used these. After 10+ packs they hold super without the slightest loosening from the screws. Great job Christian. BTW all the parts broke without managing to finish a full pack.

[bob1961]

just sent 80.42 for two sets of lockers in u.s. funds through paypal which is what 60 euro is after i converted it "thumbsup" ....................bob

....

[bob1961]

just got your acceptance email, thx "thumbsup" ...............bob

....

[EGRESSor]

please guys , send your payment in euros !

Bob, you´ve got a refund , shipping will be the same for up to 6 pairs of spools


shipping for knuckles and spools is 10€ (EURO) , thats for up to 400gramm

if there are any questions
just pm me
or send me a mail
felsenfest@sarrazin-mv.de
or
egressor@hotmail.com

[bob1961]

sorry bout that ;-) thx.............bob

....

[bob1961]

my goof up sending 60 eur instead of 50, how i did that i'm not sure....

50.00 EUR

=

67.0147 USD



i sent you 80.00 usd and you sent a refund of 9.80 so i think it should have been 13.00 refund....paypal shows 9.80 usd....this is so weird to me....9.80 usd is 13.13 eur, i don't know :lol: ..............bob

....

[EGRESSor]

if you send $ to the felsenfest paypal account it will be changed to € (euros)
the exchangerate is a little different (higher)
thats what paypal needs for it
for the refund i have to exchange from € to $
same as before , at a higher rate
thats why i will only accept payments in €

i´ve just sent you the rest from my personal account

[bob1961]

thx "thumbsup" i was just stating it was just weird cause paypal only looked like it did it in USD, so that's why i converted and sent it that way....sorry for any wrong feelings but i'm new at sending money overseas like that....looks like a great product from whom have replied after getting them....i can't wait ;-) ................bob

....

[The Cracker]

I just sent ya 30euros for a pair of the lockers, i will be looking forward to their arrival. they look top notch. payment came form bikefiend99@yahoo.com

[bob1961]

got them in todays mail "thumbsup" ................bob

....

[oldvintageiron]

Just sent you some money for 2 pairs. Hope you still have some instock. Thanks Seth.

[EGRESSor]

Just sent you some money for 2 pairs. Hope you still have some instock. Thanks Seth.

thank you Seth, i will send them today"thumbsup"

[JaDeR]

these things are sweet. i will be placing an order soon

[oldvintageiron]

got mine today. Thanks Very fast shipping. What are the stainless set screws for?

[EGRESSor]

got mine today. Thanks Very fast shipping. What are the stainless set screws for?

i drilled a hole in my axle housings , it makes it easier to change the shafts
just use it as screw plug

http://i89.servimg.com/u/f89/11/99/05/64/p1011270.jpg

http://i89.servimg.com/u/f89/11/99/05/64/p1011279.jpg

a pic that shows the wear of a shaft that runs in steel locker for 5 packs

http://i79.servimg.com/u/f79/11/99/05/64/p1011110.jpg

the assembly is easy
you may drill a hole in your axle housing, around 4mm in diameter

http://i79.servimg.com/u/f79/11/99/05/64/p1011111.jpg

first screw in the 4 set screws with medium threadlock and pre adjust them
bolt on the spool to your ring gear
assemble the axle
and tie up the set screws with a 2.5mm ball tip hex wrench

http://i79.servimg.com/u/f79/11/99/05/64/p1011112.jpg

http://i79.servimg.com/u/f79/11/99/05/64/p1011113.jpg

ready "thumbsup"

[oldvintageiron]

Man I should have know. Got one set in tonight. Took a bit to do. After I figured out how to tight the shafts it was easy. Need to make sure you don't crank down on one set scew, they need to be tightened evenly.

Thanks very much Egressor these lockers are awsome!

[cascade crawler]

just ordered a set payment came from cascaderock@sbcglobal.net thank you. cant wait to get them in my rig!

[EGRESSor]

just ordered a set payment came from cascaderock@sbcglobal.net thank you. cant wait to get them in my rig!

got it, thank you "thumbsup"
i will send them tomorrow

[cascade crawler]

much thanks :mrgreen:

[XPLORx4]

I just discovered that these lockers are designed to be used with the heavy duty gears, not the stock bevel gears.

The stock bevel gears have some pins cast into the ring gear that are designed to fit on the stock plastic locker housing. Those pins need to be ground off (or you should just replace them with the HD gearset.)

Stock gears:
http://www2.gpmd.com/image/a/axic3392.jpg

HD gears:
http://www2.gpmd.com/image/a/axic0395.jpg

[JeremyH]

Xplor, they can still be used with the stock gears, just trim that pin off the ring gear and you are good to go. I have been running these in my Axial (that still uses stock rear gears) for a few months now and they are holding up nicely!!

[cascade crawler]

got them today look awsome cant wait to get some time to get them in thanks again

[barbaricboye]

been running these like a month or so....
no slop at all
does take some patience to install-my front has a little wobble, garage too hot to fix it/lazy..... works fine tho.

great product8)

f a MOA:twisted:

[bob1961]

you will have some play in the front no matter what locker you run from the steering joints in the axles....with these lockers mine were cut in half from what i had....so far no issues with mine "thumbsup" ..............bob

....

[barbaricboye]

you will have some play in the front no matter what locker you run from the steering joints in the axles....with these lockers mine were cut in half from what i had....so far no issues with mine "thumbsup" ..............bob

....

the "little wobble" I was referring to, is because I didn't set the axles in the locker(set screws) completely even. a little impatient on my part. There is no negative effects, yet.

but yeah you're right, dogbones/cups or cvds will have a little play no matter what tho.

[JeremyH]

the "little wobble" I was referring to, is because I didn't set the axles in the locker(set screws) completely even. a little impatient on my part. There is no negative effects, yet.
That's the reason why Christian drills holes in the axle housing....that way you can hold the shafts in place with the bearings and then tighten the set screw...

[barbaricboye]

That's the reason why Christian drills holes in the axle housing....that way you can hold the shafts in place with the bearings and then tighten the set screw...


for sure, I PMed Egressor asking what the extra silver screws were for... he explained it. I think for now they are straight enough. When/if I replace my axles I'll probably do it the "right way".

I really need to come out to one of the Houston GTGs or comps.... been in AZ lately, but when I get back Ill most likely show up. Keep the vids and pics coming JeremyH- really enjoy them.

you guys in Houston would chit a brick if you saw the terrain out here.:shock:

[JeremyH]

Haha.....yep, I've been out to AZ before....and had neither my 1:1 or RC crawler....and wished that I had both!

Sure, we'd love to have you at one of the GTGs or comps....they are quite a bit of fun!

[bob1961]

the "little wobble" I was referring to, is because I didn't set the axles in the locker(set screws) completely even. a little impatient on my part. There is no negative effects, yet.

but yeah you're right, dogbones/cups or cvds will have a little play no matter what tho.

i built my axles with the halves open and tightened the set screws in the lockers without the need to drill holes in the housings....just put the axles, bearings and lockers in there loose with the bearing at the axle tube ends and rotate the locker to tighen the set screws....easy to watch for any out of round wobble....my buddy forgot to tighten his set screws with loc-tite and had them come loose on a run, he just took the screws out that he needed to get the one housing half off to get to the set screws....you really don't need the access holes drilled if you don't want to "thumbsup" ................bob

....

....

[EGRESSor]

Thanks guys "thumbsup"
your feedback will be helpfull for other customers
and me8)

[bob1961]

also with lockers and axles in hand out of the housings you can screw the set screws in to just allow the axles flats to fit in the lockers, then adjust them from there to center the axles flats before assembily...............bob

....

[Tanis]

These lockers are sweet, very nice machine work and perfect for eliminating all slop(one of my pet peeves):mrgreen:"thumbsup" Looking forward to getting them installed and on the rocks.

[bob1961]

and don't ferget to loc-tite those set screws too "thumbsup" ................bob

....

[CD13]

Paypal sent for 1 pair of locker,Thanks "thumbsup"

[EGRESSor]

Paypal sent for 1 pair of locker,Thanks "thumbsup"

got it , thanks "thumbsup"
i will send them on monday

[barbaricboye]

Thanks guys "thumbsup"
your feedback will be helpfull for other customers
and me8)

no problem(I support great products)... these are gonna catch on big time. wonder what people are currently using instead of these?

broke a dogbone, took some pics while I was in there, thought I'd share.
heres a pic of ZERO or barely any WEAR(marks are probably from tightening/sliding "flats" into position while installing).
this is like 1.5 months, at least 30 packs--I should've taken pics of the locker.

[team3six]

Yo, EGRESSor sent ya a P.M. on these

[team3six]

Payment sent sir. thanks

[EGRESSor]

Payment sent sir. thanks

got it , thanks"thumbsup"
parts will be send out tomorrow

[DRCrawlGood]

i think you will buy one after my torquetwisteliminator is done :lol:

What is this "witch craft" you speak of? More info please.

[Tanis]

Got a chance to install these. The fit and finish is superb and they went in without a hassle. I just tightened down each side a little at a time so the shaft spun true"thumbsup"

http://img216.imageshack.us/img216/6492/egressor001.jpg (http://img216.imageshack.us/i/egressor001.jpg/)

http://img248.imageshack.us/img248/8053/egressor002.jpg (http://img248.imageshack.us/i/egressor002.jpg/)

I'd recommend these to anyone8)

[cliff]

Lockers arrived today, 8 days from Germany to OZ is pretty awsome. They look sweet, nice clean finish. I will fit these tonight or tomorrow and give them a good thrashing over this weekend. Thanks for the outstanding service!

[Aussie Nerd]

Great product, but are a pita if you have no patience (ie me). I can get my rear axle running beautifully, but when it come to the front all I can do is swear at it. Not sure I would recommend to a friend, but are still a great product.:|

Cliff: Grumble, Grumble lucky bloke, it takes at least a week to get through the the local post office here:evil:

Sorry if it sounded like I was bashing, but I am not overjoyed with my front axle.

Kieren

[cliff]

Well, if you persist you will get it right. I got mine sorted with the cases apart, you just need to have a good eye to ensure the axles run true and just tighten them enough so they don't fall out. Then throw them together and using the hole in the case nip them up. SWEET AS!!"thumbsup", now I'm just playing with the suspension setup a bit to get rid of the dredded torque twist.....:twisted:

[activethunderrc]

a friend and i got a set of these each - best locker on the market - it can not be beat - the percision and fit are perfect - do not hesitate to get a set these are the best quality for the money -
when he says zero slop he means it -
thanks for an awesome product
chris

[firekiddc02]

Christian Ive sent you paypal. I cant Pm you your box is full.

[Rockies26]

Nice product do you have any left? and do you ship to Canada? Cause i gotta get some of these."thumbsup"

[team3six]

Ohhh, I am sure he some!"thumbsup"

Ill tell you right now as soon as I was turned on to these, It has been one of the best investments I ever purchased. My triple S runs tight everytime with no issues!

[EGRESSor]

thanks for all your feedback "thumbsup"

Nice product do you have any left? and do you ship to Canada? Cause i gotta get some of these."thumbsup"

~30 sets in stock
worldwide shipping is 10 EURO

[SWelte]

Putting Axial overdrive gears in a set of Wheely King axles and thinking this may be the way to go. Has anyone tried it yet?

[firekiddc02]

Got mine in yesterday. Super fast shipping 4 days from germany to the us. Product looks awesome also

[team3six]

wow, 4 days to the U.S.! you must of got lucky catching the container being shipped here on the last day. good deal.Got mine in yesterday. Super fast shipping 4 days from germany to the us. Product looks awesome also

[waterweezel]

Paypal sent Thanks"thumbsup"

[prusik333]

Just ordered a set of these lockers, can't wait to get them
thanks EGRESSor"thumbsup"

[Tupers]

wow, 4 days to the U.S.! you must of got lucky catching the container being shipped here on the last day. good deal.

I suspect they came on a plane rater than a container ship, still 4 days is very impressive.

[prusik333]

EGRESSor, these look good in the RCcrawler mag volume2 also, nice job"thumbsup"

[waterweezel]

Recieved my spools today :D, Thanks again Christan for a quality product and a smooth transaction."thumbsup"

[EGRESSor]

50+ sets are back in stock:mrgreen:

[Rockies26]

Payment sent thanks again Christian can't wait to get them "thumbsup"

[Mikeney]

Payment sent Christian.. Thank you!

[Rockies26]

Recevied my lockers the other day that was quick "thumbsup""thumbsup", nice craftsmanship too Christian I would recomend them to anyone.

[Sverref]

Payment sent for one set of these magic pieces:)