run2jeepn
03-10-2009, 02:00 AM
http://i387.photobucket.com/albums/oo312/crawlerworld/JPheadercopycopy.jpg
These are running very Low... Matter of fact all I have now are the special Edition Gold ones..
Once these are gone. It will be a while before I get the new CAD Drawings finished for the New ones.
The new ones will have some added BEEF and a special add on Feature for around 20% more Steering.
http://www.jpcustomrcs.atomicshops.com/i/Gallery/silver_Bearings.jpg
http://www.jpcustomrcs.atomicshops.com/i/Gallery/stick1.jpg
Spec's:
*Made of High quality Aluminum
*Shaved for tighter turning radius
*Grooved to hold 4 Sub-C Batteries per Knuckle
*4 Sub-C's will fit in a Maxx Size wheel.
*Larger sized inner and outer bearings for Ultimate load support
*Machined from a Solid chuck of Aluminum for strength
Some wheels need 3/4in Wideners and some don't. I now for a fact that XTM Throns need 3/4in Wideners. But Velocity 40's wheel only need some small trimming on the inner Wheel's Webbing to run battert packs. If you are using 12mm to 14mm Adaptors they may clear without any trimming on the wheels. As more of these get out and I get more feedback on what needs what. I will have a Chart on whats needed for which wheels.
So any Beadlock or Wheel that is a Maxx Sized or Bigger these will hold 4 Sub-C's batteries. If you like making you own battery packs. Then this will make it even easier. Just strap you batteries in place and solider together. The grooves in the knuckles insure a tight and secure fit. These work with 2.2 Wheels, but battery packs won't fit inside the wheel. These work just like stock Clod Knuckles.
Whats included:
1-Left knuckle
1-Right Knuckle
Two 8x22x7 Bearings
Two 8x22x6 Bearings
These are running very Low... Matter of fact all I have now are the special Edition Gold ones..
Once these are gone. It will be a while before I get the new CAD Drawings finished for the New ones.
The new ones will have some added BEEF and a special add on Feature for around 20% more Steering.
http://www.jpcustomrcs.atomicshops.com/i/Gallery/silver_Bearings.jpg
http://www.jpcustomrcs.atomicshops.com/i/Gallery/stick1.jpg
Spec's:
*Made of High quality Aluminum
*Shaved for tighter turning radius
*Grooved to hold 4 Sub-C Batteries per Knuckle
*4 Sub-C's will fit in a Maxx Size wheel.
*Larger sized inner and outer bearings for Ultimate load support
*Machined from a Solid chuck of Aluminum for strength
Some wheels need 3/4in Wideners and some don't. I now for a fact that XTM Throns need 3/4in Wideners. But Velocity 40's wheel only need some small trimming on the inner Wheel's Webbing to run battert packs. If you are using 12mm to 14mm Adaptors they may clear without any trimming on the wheels. As more of these get out and I get more feedback on what needs what. I will have a Chart on whats needed for which wheels.
So any Beadlock or Wheel that is a Maxx Sized or Bigger these will hold 4 Sub-C's batteries. If you like making you own battery packs. Then this will make it even easier. Just strap you batteries in place and solider together. The grooves in the knuckles insure a tight and secure fit. These work with 2.2 Wheels, but battery packs won't fit inside the wheel. These work just like stock Clod Knuckles.
Whats included:
1-Left knuckle
1-Right Knuckle
Two 8x22x7 Bearings
Two 8x22x6 Bearings