HD WK frame

[killbucket]

http://www.air-sharp.com/SofaKing00001.JPG
Since I designed it, I can call it anything I wish...
The SofaKing! Because it's SofaKing Strong!

More pics processing...

[killbucket]

http://www.air-sharp.com/SofaKing00002.JPG
The frame isn't aluminum, it's CNC'd ABS sheet, and it was 6mm thick to start with.
The lower cradle is thinner than the main rails.

http://www.air-sharp.com/SofaKing00003.JPG
I commend HPI on these LONNNNNNGGGG shocks. Digging for shorter ones from my old RS4MT.
I could lower the body mounts, but as with all my vehicles, it's a basher, and will never see competition. So I'll give up some travel for a more scale look. This body (and both chassis, there's no electronics in either yet) is pure virgin, fresh out of the bag. What looks like scratches is static holding dust.

http://www.air-sharp.com/SofaKing00004.JPG
Since I got two spankin' new WK's here, I had two new tall body mounts. Convenient.

http://www.air-sharp.com/SofaKing00005.JPG
Ready for a front bumper.

[killbucket]

http://www.air-sharp.com/SofaKing00006.JPG
It didn't take SofaKing long to make...
http://www.air-sharp.com/SofaKing00007.JPG
In fact, it took SofaKing little time...
http://www.air-sharp.com/SofaKing00008.JPG
It would be SofaKing easy to make copies of it...
http://www.air-sharp.com/SofaKing00009.JPG
It's SofaKing detailed...
http://www.air-sharp.com/SofaKing00010.JPG
HEY! Not SOFAKING CLOSE, BUDDY!
http://www.air-sharp.com/SofaKing00011.JPG
This is gonna be SofaKing fun!

[killbucket]

http://www.air-sharp.com/willyking2009_011.JPG
SofaKing's little sister, WillyKing. Willy still does Wheelies.

http://www.air-sharp.com/willyking2009_012.JPG
WK will get a big rack on the back to carry stuff.

http://www.air-sharp.com/willyking2009_013.JPG
The body is in process, a coat of candy red is next.

http://www.air-sharp.com/willyking2009_014.JPG
A rear rack will help fill up the back of the chassis.

http://www.air-sharp.com/willyking2009_015.JPG
WK is the wife's present for an upcoming birthday. Yes, she loves RC. But only Wheelie cars!

[big geo]

:lmao:

[brokenb4]

nice frame name

[HAAS599]

keep workin at it

[killbucket]

More coming today...
Meanwhile, feast your beads on this Off-Topic project: An airsoft Minigun, ready for Will Smith's next movie.
http://www.air-sharp.com/micromini2009_00028.JPG
I call these the 516. Five barrels, 16mm each. This "Cop Car" themed one was specially painted, the gloss black chassis in the background shows how it normally looks.

http://www.air-sharp.com/micromini2009_00035.JPG
All the workings from a CYMA airsoft gun are incorporated, a hobby servo is reworked to automatically drive the BB-feeder. A Mabuchi 750 motor drives the barrel pack using a Bissel vac belt. It fires 6mm BB's at 330FPS, at about 900 rounds a minute, and is fully portable at 14 pounds fully loaded. did I mention it has a 15,000 round magazine?

http://www.air-sharp.com/micromini2009_00030.JPG
The handle flips up for firing. You wondering where the trigger is?
The grip is pressure-sensitive: A firm squeeze with the index and adjacent finger starts the barrels spinning, a slightly harder grip using the ring and pinky activates firing. Since you have to actively squeeze in two areas to fire, it's impossible to accidentally fire it, even though it technically lacks a safety.

[killbucket]

Necro....yesterday WAS Alice Cooper's birthday...

http://www.youtube.com/watch?v=6u0kZJY4uHk

First Look at my upcoming HEMTT chassis, made from TWO Wheely Kings.

[chris_dishmon]

i gotta see some footage of that baby in action! :mrgreen:

[killbucket]

http://www.rccrawler.com/forum/showthread.php?p=2295078#post2295078
This vehicle became...MegaWilly.