Pre-Order Axial SCX10 TR (Trail Ready)

[TLTRyan]

In stock and shipping!!



http://www.tcscrawlers.com/Pre-Order-Axial-SCX10-1-10th-scale-electric-4WD-truck-TR-Trail-Ready-AX90012-p-17878.html


http://www.tcscrawlers.com/images/D/mini-dsc_0551.jpg

SCX10 TR (Trail Ready)


Complete ready to run out of the box. 4WD. 27T Electric Motor: Tear up the terrain in-door or out-doors. Easy Operation: No Tuning, No Fuel, No Loud Exhaust Noise. Just Plug'n'go! 20T pinion paired with an 87T spur gear gives you quick acceleration while still allowing for a smooth low end speed range. True Beadlocks: No Messy Glue! Hi-quality Composite Plastic and Metals. 6 LED's: 4 white LED’s for the front and 2 red LED’s for the rear. Electronic Speed Controller (ESC): forward and reverse speed controller. Hi-Torque metal gear servo helps hold your line when rock crawling.

Solid Rear Axle lockouts improve ground clearance and offer a more realistic appearance. Slipper Clutch: Reduces gear wobble for a more efficient drivetrain. Allows a motor to work more efficiently and greatly enhances the durability of the drivetrain. Steel chassis rails with a molded composite plastic cross members provide a solid and rigid chassis. Ultra compact and lightweight transmission. Full Ball bearings. Overall gear ratio range from 15:1 to 74:1. Transmission: 2.6:1; center mounted. Tires: Pro-Line 1.9 Flatirons tires. Wheels: Axial 1.9 8 Hole Beadlocks (Satin Chrome). Suspension: 3 Link. Drive Shafts: Universal front and rear

Chassis Dimensions
a. Wheelbase: 290mm (11.4”)
b. Width: 227mm (9”)
c. Height: 150mm (5.9”)
d. Weight: 2086g (4.6 lbs)

Ground Clearance: 68mm (2.7”)

Body Dimensions
a. Length: 425mm (16.7”)
b. Width without fender flares: 180mm (7.0”)
c. Width with fender flares: 226mm (8.9”)
d. Height: 145mm (5.7”)

Electronics
a. Radio: 2 Channel
b. Servos: 1 Hi-Torque metal gear (Standard Size)
c. Forward/Reverse ESC
d. Motor: 27T 540/550 Size

Required Items
a. (1) 7.2v Stick Pack Battery
b. 8 AA size Batteries


http://www.tcscrawlers.com/Pre-Order-Axial-SCX10-1-10th-scale-electric-4WD-truck-TR-Trail-Ready-AX90012-p-17878.html

http://www.tcscrawlers.com/images/D/scx10_pkg_side-view.jpg

http://www.tcscrawlers.com/images/D/scx10-tr_chassis.jpg

http://www.tcscrawlers.com/images/D/lighting-6-leds.jpg

http://www.tcscrawlers.com/images/D/untitled-02.jpg

http://www.tcscrawlers.com/images/D/mini-dsc_0551.jpg

http://www.tcscrawlers.com/Pre-Order-Axial-SCX10-1-10th-scale-electric-4WD-truck-TR-Trail-Ready-AX90012-p-17878.html

[rockmahala]

wish i could get one but got a baby on the way :sad:

[LEROY]

wish i could get one but got a baby on the way :sad:
buy it for the baby:mrgreen:

[AZRC]

that thing is great, the body beat the heck out of the scx10 origoinal body... time to start saving.

[NeXt559]

any word on when a conversion kit for the original scx10 is comin out?

[TLTRyan]

any word on when a conversion kit for the original scx10 is comin out?



The body/cage does have a separate part #AX4010 The bumpers and rock sliders are not included.:cry:

Dingo Truck Body

* Realistic molded roll cage and fender flares are included with the complete body, molded in tough durable composite plastic
* Replacement polycarbonate body available without the molded cage and fender flares
* Photorealistic die-cut premium vinyl decals include window frames, headlight, grille, tail lights and more!
* Overspray film and pre-cut vinyl window masks make painting fast and simple.
* Dimple marks for body post drill locations.
* Made from durable .040” clear polycarbonate plastic for long life
* This body will fit the AX10 Scorpion, SCX10, Savage, T-Maxx, and E-Maxx monster trucks. Minor modification will allow this body to fit on other monster trucks currently on the market. That is all the info I could find. You can download the manual for the rest of the items. Part numbers are listed for the bumpers and rock sliders. http://www.axialracing.com/ftp/pdfs/AX90012-I001_web.pdf

I also own an SCX-10, but for the money this thing looks very nice."thumbsup"

[TLTRyan]

I just received information that the Trail Ready trucks will be here soon. We are running a promotion on them."thumbsup"

Get $25 off your Axial Trail Ready! Just add the Axial Trail Ready to your shopping cart to get $25 off instantly! Offer ends October 1st.
Follow the Link to Pre-Order. http://www.tcscrawlers.com/Pre-Order...2-p-17878.html (http://www.tcscrawlers.com/Pre-Order-Axial-SCX10-1-10th-scale-electric-4WD-truck-TR-Trail-Ready-AX90012-p-17878.html)

[rcjunky3]

what about somebody that had already pre-ordered it from you a month ago ?

[TLTRyan]

what about somebody that had already pre-ordered it from you a month ago ?

Send an e-mail to cs@tcscrawlers.com with your order info.

[rcjunky3]

Send an e-mail to cs@tcscrawlers.com with your order info.
it isnt for me but a friend that ordered it so i will pass it along

[TLTRyan]

All Pre-orders shipped last week. We still have a few in stock"thumbsup""thumbsup"

They wont last long.
http://www.tcscrawlers.com/Pre-Order-Axial-SCX10-1-10th-scale-electric-4WD-truck-TR-Trail-Ready-AX90012-p-17878.html

[Davenow]

Just ordered mine "thumbsup"

Any advice on cheap ways to make it a bit more realistic? I want to do like a Blazer or 80s bronco body, with bumpers and such, but I have no idea where to start...

[TLTRyan]

Just ordered mine "thumbsup"

Any advice on cheap ways to make it a bit more realistic? I want to do like a Blazer or 80s bronco body, with bumpers and such, but I have no idea where to start...

Cool"thumbsup"

I would check out some of the build threads in the scale section. You will get lots of ideas.

Pro-Line makes some bumpers if you don't like the look of the stock ones. http://www.tcscrawlers.com/Proline-Western-Bumpers-6052-00-p-17222.html (http://www.tcscrawlers.com/Proline-Western-Bumpers-6052-00-p-17222.html)
Have you seen the Blazer CGR? I have always liked the look of it. http://www.tcscrawlers.com/On-Sale-5-off-Proline-1980-Chevy-Blazer-CGR-body-with-CGR-cage-3244-60-p-17312.html

[Davenow]

Cool"thumbsup"

I would check out some of the build threads in the scale section. You will get lots of ideas.

Pro-Line makes some bumpers if you don't like the look of the stock ones. http://www.tcscrawlers.com/Proline-Western-Bumpers-6052-00-p-17222.html (http://www.tcscrawlers.com/Proline-Western-Bumpers-6052-00-p-17222.html)
Have you seen the Blazer CGR? I have always liked the look of it. http://www.tcscrawlers.com/On-Sale-5-off-Proline-1980-Chevy-Blazer-CGR-body-with-CGR-cage-3244-60-p-17312.html


How would this body
https://www.tcscrawlers.com/Proline-70-Ford-F-100-Body-3205-00-p-17223.html
work? I am not really sure how to look at it and know if it will look right on the SCX10's wheelbase and width and such.

And would these
https://www.tcscrawlers.com/Proline-Western-Bumpers-6052-00-p-17222.html
work well with this body?

Like how much fabrication am I looking at to get it all fitting up well? I can handle some :)

[TLTRyan]

The F-100 is a little narrower. Wheelbase should be close, its not hard to lengthen or shorten your links if needed.

Im sure someone in the SCX-10 section has installed the F-100 body on the stock chassis. In may be worth a look.

[Davenow]

ahhhhhhhhhh the wait is killing me!!!! *shakes fist at mail man*




Yeah its only been 1 day and I am already watching the mailbox lol I am fiending for this thing. I litterally have my other desk cleared off with a freshly charged stick pack, 8 fresh AA batteries (didnt know if it took 4 or 8 for the xmitter) a pair of scissors and a razor blade, so that I can bring it right in, open it up, slap batteries in it and go run over things before the mailman has even reached the end of the block "thumbsup"