gecko II clod chassis and x-factor axles

[motorizedgecko]

can you mount the gecko II chassis to the x-factor or txt-1 axles becaus that's where I'm heading. I want to use my emaxx tranny and one of those gear reducers. by the way, where do you get one of those gear reducers that Cman has in his xfactor?

[jordanator62]

sure why not. but i wouldnt use an emaxx tranny, cause they are big and bulky. a pede tranny might fit, and you could still use a gear reduction.

jordan

[JakeDaSnake]

Hey, yea an e-maxx tranny would fit but you'd have to do A Lot of triming I think... I have a pede tranny for sale thats already trimed to the GD-600 gear reduction... I'll take 25 shipped for it... And the GD-600 gear reduction you can find it at www.towerhobbies.com type in GD-600 for the search....

let me know of the tranny... But I did have an E-Maxx tranny in my Jugg and that chassis was only 4 inches wide all I had to trim was to motor plate...

Lter
Jake

[PastryLikeDood]

Ive also got an X-Factor 2 and ive got a e-maxx tranny it dropped right in no trimming at all.. although it seems to be a tight fit... Im planning on buying this chassis however though http://www.clodparts.com/products/chassis/48.html Its the G-Made Spider..

BTW I can't find a gear reduction kit anyone have a link?

[motorizedgecko]

what would I have to trim on the emaxx tranny to put the GD-600 on?

Oh and the pede has 48 pitch gears and I want to stay with 32 pitch because I already have them along with the emaxx tranny.

If the pitch on the gear reducer is 48 pitch, then I will get 48 pitch gears or just not use the reducer and see how things work without it.

I could care less about the second gear in the tranny so I'll lock it in first gear

how would you mount the pede tranny in the gecko chassis?

[motorizedgecko]

http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXSL79&P=ML