Scale Crawler Picture Archive (PICTURES ONLY!)

[mike]

Post up the pics of you scale rigs for others to drool over.

Also put up some specs. :)

Truck Base :

Body:

ESC:

Motor(s):

Servo(s):

Trans:

Axles:

Tires:

WB:

Overall Width:

Diff clearance:

Center Chassis clearance:

Overall height:

Weight:

New scale truck I got. Haven't dicided on a body yet though.



********** Edited by Bender **********
I turned this into a Sticky. Let's keep this thread for stats and pics only, no chit-chat please!!

[microgoat]

Truck Base : CNC'd aluminum ladder frame

Body: HPI Bronco

ESC:Futaba MC330CR

Motor(s):Integy 55t

Servo(s):JR ST125MG, chassis mounted

Trans:Pede

Axles:TLT

Tires:Swamp Dawgs

WB:11-3/4"

Overall Width:9.5

Diff clearance:1-3/8

Center Chassis clearance: 2.75"

Overall height: 11" to the top of the KC's

Weight: 6 lbs +/-

[oIIIIIo]

Truck Base: TLT
Body: HPI Bronco
ESC: Tekin Rebel 2
Motor(s): Integy 55t lathe
Servo(s): Hitec HS645MG x 2
Trans: Associated RC10B4 Stealth
Axles: TLT
Tires: Moab
WB: 11.75"
Overall Width: 9.75"
Diff clearance:
Center Chassis clearance: 2.75"
Overall height: 10"
Weight: ???

http://i2.tinypic.com/ta3fxi.jpg

[TANK]

hacked up tlt chassis
moabs
55t
pede
locked and loaded
http://img.photobucket.com/albums/v103/mnac2soc8ty@sbcglobal.net/P1010892.jpg

[4u2c]

heres mines one its kind of trail rig i would say hope you like it!!!!:mrgreen:

Truck Base: SW2
Body: Ford courier
ESC: Stock tamiya??
Motor(s): Integy 55t lathe
Servo(s): JR 4800
Trans: Stampede
Axles: TLT
Tires: Moab
WB: 8.50
Overall Width: 12.25
Diff clearance:1.50
Center Chassis clearance: 3.25
Overall height: 10"
Weight: ???


http://i5.photobucket.com/albums/y167/ashleyluvalan/alans%20rc%20pics/rockcrawlers-12.jpg

http://i5.photobucket.com/albums/y167/ashleyluvalan/alans%20rc%20pics/rockcrawlers-09.jpg

http://i5.photobucket.com/albums/y167/ashleyluvalan/alans%20rc%20pics/rockcrawlers-11.jpg

hope you liked it..........:mrgreen:

[Cole82]

Mile high!
AI runner esc
CS-70 servo
Pede tranny
55turn lathe motor
Several tires, dirt works, moabs, losi smashers.
5# RTR

[Brandon]

TLT Tuber landcruiser

Build thread:
http://www.rccrawler.com/forum/showthread.php?t=26095

Specs:
TLT axles with tobee wideners (painted flat black)
Yoko geolanders, pede wheels, with rck 3rd gen rock rings
pede tranny mounted under the hood, with a transfer case in the middle of the chassis.
55t lathe
Super rooster
Hitec 945MG
Integy shocks, losi springs (30wt oil)
11.5" wheelbase
Partial interior with recaro seats

[OIT_TLT]

Truck Base: brake line frame rails
Body: Chev C10
ESC: Super Rooster
Motor(s): Mag Mayhem
Servo(s): Hitech 645
Trans: Stampede
Axles: TLT
Tires: Mashers/Swamp Dawgs
WB: 11.625
Overall Width: 10.25
Diff clearance:1.50
Center Chassis clearance: 3
Overall height: 9.75
Weight: 6-8 pounds

http://img.photobucket.com/albums/v714/scoot_mcgrute/TLT/P4090008.jpg

http://i40.photobucket.com/albums/e237/scoots_tlt/P3260063.jpg

http://i40.photobucket.com/albums/e237/scoots_tlt/P2190036.jpg

[SlinkySam]

I am not sure mine is Scale or just a TLT Crawler. I don't have seats or an interior for that matter, but I do have head/tail/undercarriage lights, a license plate, and is full bodied (bumpers, flares, etc still in tact). However, it is only a body on top of a TLT Crawler so you decide what it is. This is my second crawler to the Slinky Family.


Truck Base : Home made 3 piece aluminum tube and plate chassis

Body: Jeep Rubicon

ESC: Rooster

Motor(s): 55T Lathe (of course)

Servo(s): Hitec 645

Trans: Losi XXX with Stampede shafts

Axles: TLT-1. No better place for this, but I run pretty blue coil over shocks that are no where near scale

Tires: Moabs. I don't run any weights in the tires and it seems to perform decently

WB: 12.25

Overall Width: Stock axle width

Diff clearance: Stock clearance with Moabs. I am letting the rocks grind down the axles.

Center Chassis clearance: 2.75" I think

Overall height: Suuuuuuuuuper high

Weight: 3.8 lbs


http://www.nor-calrcrc.com/albums/beanhollow-19mar06/acf.jpg

http://www.nor-calrcrc.com/albums/beanhollow-19mar06/aak.jpg

[RANOVRU]

Truck Base : Cut down TXT chasis w/ Clod axles

Body: '72 Chevrolet C-10 w/ FUBAR'd paint job

ESC: Novak Super Rooster

Motor(s): Integy 55's w/ 13t's

Servo(s): JR590

Trans: NA

Axles: Clod w/ full bearings, alumin. knuckles, alumin. lockers, & carbon fiber axle braces

Tires: Masher 2k's- Waiting on 2.2 Red Rocks to get here...

WB: 12"

Overall Width: 12.5" (New 'Pede rears will narrow that a fair amount when new tires get here)

Diff clearance: 1.5"

Center Chassis clearance: 4.25"

Overall height: 9.5"

Weight: 5.5lbs





http://www.offroadworld.net/gallery/Ranovru/147288.jpg

http://www.offroadworld.net/gallery/Ranovru/147289.jpg

http://www.offroadworld.net/gallery/Ranovru/147291.jpg

http://www.offroadworld.net/gallery/Ranovru/147292.jpg

[Big_L]

Truck Base : Tuber Truggy Oregon built but reinforced by NorCal SICJ!
Body: Toyota Tundra..............but it looks like a Ranger (IMO)
ESC: XRS
Motor: Integy 55 turn lathe Motor
Servo: Futaba
Trans: Pede Locked
Axles: Tlt Locked Axles
Tires: Moabs
WB: 12"
Overall Width: Need to measure
Diff clearance: Need to measure
Center Chassis clearance: Need to measure
Overall height: Need to measure
Weight: She's a pig!

http://i44.photobucket.com/albums/f4/NorCal_Big_L/Truggy_2.jpg

[XB_BOY]

All this info on this truck was measured while i had the All-t's on....

Truck Base : Brando Build Ofcourse

Body: Proline F-100

ESC: LRP Ai Runner

Motor(s): silver can

Servo(s): Hitec

Trans: Pede

Axles: TLT

Tires: Imex: All-t's, Swampa's, Moabs

WB: 11.5"

Overall Width: 10.75"

Diff clearance: 2"

Center Chassis clearance: 3.25"

Overall height: 10.75"

Weight: 3.9kgs

[badger]

Scale Half cab Bronco:

11.5" WB
8.75" track width
2.5" center clearance
8.5" max height of cab

Bender Customs chassis set up 60/40
TLT-1 Axles locked diffs
Blackfoot stub shafts
Stampede trany w/Jato shafts, 120T 64P spur
55t Lathe Motor, 16t 64P pinion
HPI Geolander tires w/pie shape foams
Traxxas rims w/rock rings
2 wheel steering
5 oz of bb's in each tire

Click here for the build thread (http://www.rccrawler.com/forum/showthread.php?t=26694)

http://www.nor-calrcrc.com/albums/scale_bronco/aab.sized.jpg

http://www.nor-calrcrc.com/albums/scale_bronco/aae.sized.jpg

http://www.nor-calrcrc.com/albums/2006_comp1/abw.jpg

[badger]

Scale Toyota Flatbed (Mountaineer)
Body: Mountaineer
ESC: Super Rooster
Motor: 55t Lathe
Servo(s): Hitec 645MG
Trans: Pede
Axles: Mounty
Tires: Geolanders
WB: 12"
Overall Width: 10"
Center clearance: 2.5"
Overall height: 9.5"
Weight: 1 metric ton

Click here for the build threads (http://www.rccrawler.com/forum/showthread.php?t=3786)

Click here for the build threads (http://www.rccrawler.com/forum/showthread.php?t=11030)

http://www.nor-calrcrc.com/albums/mounty_v4/aab.sized.jpg

http://www.nor-calrcrc.com/albums/mounty_v4/aad.sized.jpg

http://www.nor-calrcrc.com/albums/flatbed/abb.sized.jpg

[Unimoger]

Chassis: Brand0 Built

Body: Proline Ford Courier

ESC: Super chicken

Motor(s): 55t Lathe

Servo(s): Hitec 645 mg

Trans: Pede lay down locked w/ bearings

Axles: TLT locked with bearings

Tires: Proline 2.2 Moabs

Wheels : traxxas, double narrowed

WB: 11.5"

Overall Width: 10.75"

Diff clearance: 2"

Center Chassis clearance: 2 7/8"

Overall height: 8"

Weight: 7.5 lbs

http://www.nor-calrcrc.com/albums/album26/abo.sized.jpg
http://www.nor-calrcrc.com/albums/album26/abq.sized.jpg
http://www.rcrockgear.com/ORCRC_Competitions/2006/03-26-2006/PICT8103.jpg

[Unimoger]

Chassis: Brand0 Built

Body: Proline Chevy C-10

ESC: Super chicken

Motor(s): 55t Lathe

Servo(s): Hitec 645 mg

Trans: Pede lay down locked w/ bearings

Axles: TLT locked with bearings

Tires: Proline 2.2 Moabs w/ MSD Rock Rings

Wheels : traxxas, double narrowed

WB: 11.5"

Overall Width: 10.75"

Diff clearance: 2"

Center Chassis clearance: 2 7/8"

Overall height: 8"

Weight: 7.5 lbs

http://i40.photobucket.com/albums/e237/scoots_tlt/P3260099.jpg
http://www.nor-calrcrc.com/albums/album16/aah.sized.jpg
http://www.nor-calrcrc.com/albums/album16/aaj.sized.jpg

[badger]

Europa Truck Trial Rig

11.75" WB
8.25" track width
2.75" center clearance
11" max height of cab

Bruder MB Astros truck body
TLT-1 Axels locked diffs
Custom aluminum Chassis
Custom aluminum flat bed w/lexan A-frame tent
Stampede trany w/Jato shafts, 84t spur
55t Lathe Motor, 12t pinion
Captured spings w/Integy maxx soft blue springs
Associated maxx shocks
HPI Geolander tires firm w/pie shape foams
Traxxas Bandit front rims w/rock rings
2 wheel steering
6 oz of bb's in each front tires, 4 oz of bb's in each rear tire
5 RCC stickers

Click here for the build thread (http://www.rccrawler.com/forum/showthread.php?t=22302)

http://www.nor-calrcrc.com/albums/Unimog1/abe.sized.jpg

http://www.nor-calrcrc.com/albums/Unimog1/aaz.sized.jpg

http://www.nor-calrcrc.com/albums/danna_rock_010806/aav.sized.jpg

[exesivefire]

Indy

chassis : custom aluminum

rear: tlt

front: Ta02 front (indy suspention)

tranny: pede (with custom gearbox to match ratios front to rear)

body: proline mgt 1/8th scale silverado

motor : mag mayhem

esc: novak xrs

radio: jr xr3i

wb: 13.5 inches

width: 8 7/8th

center chassis clearance: 2 1/8th

diff clearance: front 1 3/8th / rear 7/8th

tires/wheels: narrowed pede wheels, rock rings, and proline dirt hawg tires

http://img366.imageshack.us/img366/7015/dsc002352hu.jpg

http://img269.imageshack.us/img269/8763/dsc003550bt.jpg

http://img313.imageshack.us/img313/7569/dsc002368ja.jpg

http://img198.imageshack.us/img198/9068/dsc003589az.jpg

http://img333.imageshack.us/img333/6038/dsc002289xo.jpg











Big Brother

chassis: custom aluminum

axels: tlt

tranny: emaxx

body: proline 1/8yh scale silverado

motor: 55t integy lathe

esc: novak xrs

radio: jr xr3i

wb: 13.5 inches

width: 9 1/4

center chassis: 2 5/8th

diff clearance: 1 1/4

wheels tires: hpi geolander tires, narrowed hpi spike wheels, rock rings

http://img199.imageshack.us/img199/2360/dsc004267ny.jpg

http://img427.imageshack.us/img427/3410/dsc004127vy.jpg

http://img427.imageshack.us/img427/3010/dsc004274ew.jpg

[kongmaxx]

http://i47.photobucket.com/albums/f165/kongmaxx/CID__06-04-06_1330.jpg
http://i47.photobucket.com/albums/f165/kongmaxx/CID__07-06-06_2047.jpg
http://i47.photobucket.com/albums/f165/kongmaxx/cid__05-10-07_1843.jpg
http://i47.photobucket.com/albums/f165/kongmaxx/cid__05-10-07_1845-1.jpg
here is my scale crawlers

old ford/jeep 55 turn motor
new ford stock motor
all 3 have pede trannies.
tires: swamp dawgs
axles:tlt

[TeeLTee]

Chassis: Team PRP

Body: Hpi Bronco

ESC: LRP

Motor(s): 35t Lathe

Servo(s): Hitec 645 mg

Trans: Stampede

Axles: TLT

Tires: 2.2 Mashers, moabs, swamp dawgs

Wheels : Hpi

WB: 11.5"

Overall Width: 10"

Diff clearance: 1.5"

Center Chassis clearance: 2.5"

Overall height: 10"

Weight: 2.7kg

[rbgerrish]

Chassis: Dorkstar Metalwerks

Body: Ford Courier

ESC: Super Rooster

Motor(s): Magnetic Mayhem

Servo(s): GWS Metal Geared

Trans: Stampede

Axles: TLT

Tires: Geolandars, Moabs, Narrowed Mashers

Wheels : Hpi

WB: 11.6"

Overall Width: ?

Diff clearance: ?

Center Chassis clearance: ?

Overall height: ?

Weight: ?



http://www.orcrc.com/outings/PDRM3776.jpg

http://www.orcrc.com/outings/c2.jpg

http://www.rcrockgear.com/ORCRC_Competitions/2006/03-26-2006/PICT8071.jpg

[Sr.Irie]

Truck Base :TLT
Body:Bronco
Frame:Hillbilly tube
ESC:Old school 610-hrv
Motor:Hillbillywound 33t
Servo(s):F-hitec 5995, R-hitec 645
Trans:Stampede
Axles:TLT
Tires:Moab
WB:12"
Overall Width:10 3/4

http://i53.photobucket.com/albums/g67/SrIrie/Bronco.jpg

[1BadJeepBruiser]

http://img.photobucket.com/albums/v73/ihaveabruiser/wintermonsterbash5/wintermonsterjam011.jpg

Truck Base : Kyosho 4runner TLT-A-FIED with EXO

Body: 4runner

ESC: JR

Motor(s):Kyosho

Servo(s): JR 650z

Trans: locked PEDE

Axles:locked TLT

Tires: Moabs on original wheels

WB: 12 1/2

Center Chassis clearance: more then 3

Overall height: 10 inches ?


http://img.photobucket.com/albums/v73/ihaveabruiser/Bryans%20house%20GTG/100_1510.jpg

http://img.photobucket.com/albums/v73/ihaveabruiser/Bryans%20house%20GTG/100_1491.jpg

http://img.photobucket.com/albums/v73/ihaveabruiser/wintermonsterbash5/220476368-1.jpg

Truck Base : TLT (SOLD)

Body: Ford Courier

ESC: JR

Motor(s): 55t lathe

Servo(s): JR 650z

Trans: Locked Stand up Pede

Axles: locked tlt

Tires: geolanders

WB: 12" maybe?

Weight:
http://img.photobucket.com/albums/v73/ihaveabruiser/courier/ROCK010.jpg

http://img.photobucket.com/albums/v73/ihaveabruiser/courier/100_0873.jpg

http://img.photobucket.com/albums/v73/ihaveabruiser/courier/ROCK009.jpg

Truck Base : Bruiser

Body: Bobbed Mountaineer body

ESC: SR

Motor(s): Lathe

Servo(s): 650z JR

Trans: CUSTOM Juggsterr single speed trans and mount

Axles: Bruiser with 4 rear hubs and wheel spacers up front

Tires:moabs

Other: Working winch, interior cage, bed cage, fuel cell, rear seating, Buggy leafed, bob'd bed, dual shock mounts more shiat then I can list
http://img.photobucket.com/albums/v73/ihaveabruiser/jersey%20crew/114_2397.jpg
http://img.photobucket.com/albums/v73/ihaveabruiser/jersey%20crew/114_2402.jpg
http://img.photobucket.com/albums/v73/ihaveabruiser/jersey%20crew/114_2389.jpg
http://img.photobucket.com/albums/v73/ihaveabruiser/jersey%20crew/114_2390.jpg

Truck Base : Boyer Built frame (SOLD)

Body: HPI Bronco body cut and dove tailed

ESC: Novak SR

Motor(s): 55T lathe

Servo(s): Hitec high torque

Trans: locked Stand up pede

Axles: locked tlts

Tires: Moabs on RPMS with Juggsterr rock rings

http://img.photobucket.com/albums/v73/ihaveabruiser/Bronco/100_0677.jpg

http://img.photobucket.com/albums/v73/ihaveabruiser/Bronco/100_0679.jpg

Truck Base : HULK WERKS Pre runner

Body: proline ford extended cab with TRUE FIRE paint scheme

ESC: super rooster

Motor(s): lathe
Servo(s): Jr 590 up front, futaba 9402 in the back

Trans: locked full metal geared PEDE

Axles: locked tlts

Tires: Moabs On RPM wheels with Juggsterr rock rings

http://img.photobucket.com/albums/v73/ihaveabruiser/beach%20again/100_0689.jpg

http://img.photobucket.com/albums/v73/ihaveabruiser/The%20ROCK/Therock013.jpg
http://img.photobucket.com/albums/v73/ihaveabruiser/The%20ROCK/Therock019.jpg


Truck Base : Bruiser

Body: Nissan Pathfinder body

ESC: Tekin rebel 2

Motor(s): magneticmayhem
Servo(s): hitec

Trans: locked PEDE

Axles: Bruiser with bearings, shimmed pinion, rear hubs all around

Tires: soon to be mashers on custom Bruiser wheels

http://img.photobucket.com/albums/v73/ihaveabruiser/summer%20MJ%20trials/100_1379.jpg

http://img.photobucket.com/albums/v73/ihaveabruiser/pathfinder/104_1249.jpg
http://img.photobucket.com/albums/v73/ihaveabruiser/pathfinder/104_1251.jpg
http://img.photobucket.com/albums/v73/ihaveabruiser/pathfinder/custom4runner015.jpg
Truck Base : high lift

Body: high lift

ESC: LRP water proof runner

Motor(s): magneticmayhem
Servo(s): JR high torque

Trans: stock 3 speed

Axles: stock with bearings and locked
Tires: stock
Wheels: Bruiser Builder custom aluminum wheels
Extras: Scale Hobbies Cap, Juggsterr rear bumper and grill guard, sho dog customs fox shock resavoirs, 2.2s- narrowed claw dawgs.... all coming soon

http://img.photobucket.com/albums/v73/ihaveabruiser/high%20lift/trekkerupdate006.jpg
http://img.photobucket.com/albums/v73/ihaveabruiser/high%20lift/whitebonetrailer002.jpg



http://img.photobucket.com/albums/v73/ihaveabruiser/high%20lift/102_1222.jpg

[bigred]

Truck Base : TLT

Body: Rubi

ESC: Rooster

Motor(s): 55t Lathe

Servo(s): Junk!!

Trans: pede

Axles: TLT

Tires: Cut-N'-Shut Proline Dirt Hawgs

WB: 12.5"

Overall Width:?

Diff clearance: ?

Center Chassis clearance:3"

Overall height: ?

Weight: 5lbs RTR


http://img111.imageshack.us/img111/821/td67de.jpg

[shrek]

here is my first attempt at a scale crawler.

chassis: homemade nn copy red polycarbonate links too
axles: clod locked with shoo goo
esc: tekin rebel
servo: hitec 645mg
center chassis clearence: 4"
wb: 12"
thats all i have for now here is some pics.:roll:

[thaclodking]

Scale Hilux:

Steel chassis
TLT axles
Pede tranny
Winch front and rear
Removable exocage
Steel front bumper
Bruiser body
Pede rims
HPI Geolandar tires

[maxxdrive]

Truck : Ole Red

Truck Base : Home made

Body: clod buster with homemade toolbox, reciever hitch, mirrors, cowl induction hood

ESC: lrp runner

Motor: 45T Lathe

Servo: Hitec 645 ms

Trans: 1st-stampede 2nd-nitro rustler

Axles: TLT-1.

Springs: Jugg leaf springs

Tires: Moabs.

WB: 11"

Overall Width: Stock axle width

Diff clearance: 1.5"

Center Chassis clearance: 3"

Overall height: 9.5" to top of cab

Weight: ? lbs
http://img171.imageshack.us/img171/1129/olered5small8oc.jpg
http://img169.imageshack.us/img169/9047/olered4small6ys.jpg
http://img159.imageshack.us/img159/458/n63sv.jpg

[NP435]

Here is my Bronco and Cruiser, both bent steel frames, same old TLT BLA BLA BLA
The frame was bent with a torch in a vise

http://i56.photobucket.com/albums/g169/bronco69/cruiserincrack.jpg


bronco
http://i56.photobucket.com/albums/g169/bronco69/2411.jpg

[ColquittCustom405]

http://img180.imageshack.us/img180/5753/dscf04246iu.jpg




http://img470.imageshack.us/img470/282/dscf04330fz.jpg


http://img351.imageshack.us/img351/3564/dscf04313kk.jpg


http://img169.imageshack.us/img169/2701/dscf04306vf.jpg


http://img285.imageshack.us/img285/9431/dscf04288kf.jpg


Specs:
-79 Nissan Cab
-TLT axles
-Futaba 3306 ESC
-Hitec 5625 Servo
-Integy Shocks
-Pede Trans
-11 3/4" WB
-2 3/4 Belly clearance
-Trail Box
-5.98 pds RTR
-Colquitt Custom Truggy Chassis

[madscrambler]

I sold the black wrangler but am working on a new one. The other is a replica of the spidertrax black widow

[madscrambler]

here she is

[rcbif]

Truck Base : modified stock tlt chassis
Body:ford bronco
ESC:lpr runner
Motor(s): matrix 55t
Servo(s):hitec standard
Trans:pede
Axles:tlt
Tires:2.2 moab
WB:11.5in
Overall Width:9.75in
Center Chassis clearance:4in
Overall height:11in
Weight:donno
http://i6.tinypic.com/13zz7uv.jpg
http://i6.tinypic.com/13zz8na.jpg

[Mello_Yello]

Truck Base : Custom Alum Chassis

Body: 72' C10

ESC: AI Runner plus reverso, waterproof

Motor(s): Integey 45t

Servo(s): Hitec

Trans: pede

Axles:tlt

Tires: 2.2moabs

WB:~~12"

Overall Width:~~10"

Diff clearance:1.5"

Center Chassis clearance:~~4"

Overall height:~~10"

Weight:idk, heavy as hell...

http://img.photobucket.com/albums/v514/SinfulAE86/Crawler/thebusinessend.jpg
http://img.photobucket.com/albums/v514/SinfulAE86/Crawler/backend.jpg
http://img.photobucket.com/albums/v514/SinfulAE86/Crawler/c10withvette.jpg
http://img.photobucket.com/albums/v514/SinfulAE86/Crawler/side.jpg
http://img.photobucket.com/albums/v514/SinfulAE86/Crawler/top.jpg
http://img.photobucket.com/albums/v514/SinfulAE86/Crawler/belly.jpg

[smokinubyrc]

Truck Base : sw2 tlt

Body: jeep rubicon

ESC: novak xrs

Motor(s): Integey 35

Servo(s): Hitec

Trans: pede

Axles:tlt

Tires: 2.2moabs

WB:12"

Overall Width:9"

Diff clearance:1.75"

Center Chassis clearance: 2.75"

Overall height:10"

Weight: 5.5 lbs
http://i68.photobucket.com/albums/i35/smokinubyrc/DSC00631.jpg

http://i68.photobucket.com/albums/i35/smokinubyrc/DSC00625.jpg

[roadkill424]

tlt
custom clod body K5
super rooster
AE tranny
custom chassis
swamper tires

better pics soon
http://i48.photobucket.com/albums/f221/roadkill424/IM002761.jpg

[geezy0022]

here some mounty pic
http://i46.photobucket.com/albums/f108/geezy0022/atdalake119.jpg
http://i46.photobucket.com/albums/f108/geezy0022/atdalake120.jpg
http://i46.photobucket.com/albums/f108/geezy0022/atdalake118.jpg
mods
esc- novak exv 14.4v
motor- titan monster
bat-two 2400 orion
single speed trany form scale hobbie
4-rc4wd leaf springs
4-rc4wd rear hubs
4-rc4wd rims
swamp dawgs
shocks for a buggy i had
buggy leaf spring set up in rear
dubble shackle in front
full ballbearings
ped shafts

[gren2]

http://i59.photobucket.com/albums/g294/gren2/HPIM0843c.jpg

http://i59.photobucket.com/albums/g294/gren2/DSCN0782.jpg
Truck Base :stampede:flipoff: :flipoff: :flipoff: :flipoff: :flipoff: :flipoff: :flipoff:

Body:S-10

ESC:old futaba

Motor(s):55-turn lathe

Servo(s):futaba s3003

Trans:stampede

Axles:tlt

Tires:masher 2ks

WB:11in

Overall Width:10in

Diff clearance:1.7in

Center Chassis clearance:4.5in

Overall height:10in

Weight:6.5lb:shock:

[XB_BOY]

hey guys

heres my pajero with the croc hunter body on it and the trailer behind:

[TerribleOne]

Rubicon Buggy

Hulkwerks tube frame
TLT axles, blackfoot stubs
Rc4wd Beadlocks/moabs
Pede trans
45t lathe
Rebel 2
Hitec 645
Lots of lexan panel work
Recaro seat, dash, steering wheel

WB. tad over 12.5
Heavy

[TerribleOne]

Leaf Toyota

Bruiser frame
TLT axles
Jugg leafs up front, bruiser out back
Pede trans
Narrowed M2K's
N Pede wheels, with skip rockrings
27t silv can for now
Tundra cab, Bruder bed
MSD Hilift
LRP waterproof esc
Hitec 645

WB. 12.25
WT. 9.5 nice and narrow

Built for the trail

[microgoat]

Montana Scale Designs BB-51 frame, backwards
Tamiya 1/14 Mercedes-Benz 1838 cab
TLT axles
Tamiya big rig 3-speed w/ Rikpal motor plate
Pede tranny, divorced
E-Flite Park 400 outrunner w/ discontinued Goatworks adaptor plate
Mamba-25 speedo
Hitec 645 steering servo
JR R-1 FM radio
HPI Geolander tires, custom wheels
Duratrax shocks, Losi springs
12-1/2 inch wheelbase
2-1/2 inch center clearance

[exesivefire]

The "pre runner"

scratch built frame

emaxx tranny

16t motor

rooster esc

tlt rear with custom swing arms

cross beam style front suspention

proline 1/8th scale silverado lid

hpi geolanders on narrowed hpi spike wheels with unimoger rock rings

http://i67.photobucket.com/albums/h299/exesivefire/DSC01279.jpg

http://i67.photobucket.com/albums/h299/exesivefire/DSC01284.jpg

[sony969]

http://i11.photobucket.com/albums/a168/sony969/rc.jpg

[CoreyK]

Truck Base : CSC-1

Body:Rubicon

ESC:Rooster

Motor(s):45t late

Servo(s):645mg

Trans:pede'

Axles:TLT

Tires:Moabs

WB:12.5"

Overall Width:9.5"

Diff clearance:1 1/4"

Center Chassis clearance:2.5"

Overall height:10 1/4"

Weight:???
http://i2.photobucket.com/albums/y25/Corey13/CSC-1%20build/100_0873.jpg
http://i2.photobucket.com/albums/y25/Corey13/CSC-1%20build/100_0872.jpg
http://i2.photobucket.com/albums/y25/Corey13/CSC-1%20build/100_0896.jpg

[rckjeep]

http://www.nor-calrcrc.com/albums/album35/aaa.sized.jpg
http://www.nor-calrcrc.com/albums/album19/aaj.sized.jpg

And of course my first and deeply missed Scale crawler Ralph, I miss ya man!
http://www.nor-calrcrc.com/albums/Tube-Buggy-TLT/aau.sized.jpg
http://www.nor-calrcrc.com/albums/Tube-Buggy-TLT/aat.sized.jpg

The scale Army Truck
http://www.nor-calrcrc.com/albums/super_duty/abl.sized.jpg

the scale toyota
http://www.nor-calrcrc.com/albums/album15/aau.sized.jpg

[Cole82]

Bronco with steel frame and steel bumpers all welded together. Bruiser leafs too.

[STANG KILLA SS]

Truck Base : alum. angle stock,and acrylic plate

Body: new bright 1/6 TJ

ESC: old futaba for now

Motor(s):55T

Servo(s):futaba

Axles:clod

Tires:nylint

WB:16.25"

Center Chassis clearance: 5.25"

Weight: ALOT :shock:


http://img93.imageshack.us/img93/9279/jeepcrawlerlu4.jpg

http://img79.imageshack.us/img79/2112/ken2hn7.jpg

http://img79.imageshack.us/img79/1075/ken8nn4.jpg

http://img79.imageshack.us/img79/1217/ken3bj0.jpg

http://img401.imageshack.us/img401/9983/ken4tu7.jpg

http://img79.imageshack.us/img79/7169/ken6zm0.jpg

[swamped2a]

Truck Base : aoshima toyota 4x4

Body: toyota 4x4

ESC:

Motor(s): xmod

Servo(s): stock ssmt servo

Trans: XRC tranny

Axles: ssmt

Tires: aoshima swampers

WB: 5"

Overall Width: 3 1/2"

Diff clearance: n/a

Center Chassis clearance: 1 1/4"

Overall height:3 1/2"

Weight: less than a pound

http://i29.photobucket.com/albums/c260/88swampedmj/IMG_1421.jpg

http://i29.photobucket.com/albums/c260/88swampedmj/IMG_1418.jpg


http://i29.photobucket.com/albums/c260/88swampedmj/IMG_1415.jpg

http://i29.photobucket.com/albums/c260/88swampedmj/rcjeepbottom.jpg

[AIPOHAKU]

Heres mine!

Benders SW2 Chassis
TLT axels
Hitech 645 servo
Pede Tranny
Maxx Shafts
Narrowed Pede Rims
Hand Bro's Rock Rings "Classics"
Moabs
Dovetailed Bronco Body
Intel ESC
http://i98.photobucket.com/albums/l256/aipohaku_2006/ROCKEATAH/IMG_0259.jpg
http://i98.photobucket.com/albums/l256/aipohaku_2006/ROCKEATAH/IMG_0256.jpg

[YJesse]

Truck Base : Welded steel ladder frame

Body: F100

ESC: SuperRooster

Motor(s): MagMayhem

Servo(s): Hitec 645mg

Trans: Stealth

Axles: Tlt

Tires: Boggers/Mashers/Moabs

WB: 11 3/4"

Overall Width: 10 3/4"

Diff clearance:

Center Chassis clearance: 2 1/2" center diff

Overall height: 9 3/8"

Weight:

http://home.comcast.net/~jjelen/boggers1.jpg

http://home.comcast.net/~jjelen/boggers2.jpg

http://home.comcast.net/~jjelen/boggers3.jpg

http://home.comcast.net/~jjelen/boggers4.jpg

[JasonInAugusta]

Scorpion

Truck Base : TXT

Body: John Boyer frame

ESC: Novak Super Rooster

Motor(s): Integy Lathe

Servo(s): Futaba micro

Trans: TXT

Axles: TXT

Tires: HPI Savage

WB: 14"

Overall Width: 13.5"

Diff clearance: 1.65"

Center Chassis clearance: 4"

Overall height: 10.5"

Weight: 13+lbs


http://projecttwin.com/files/HydroScorpion/lake/2.jpg

http://projecttwin.com/files/HydroScorpion/lake/5.jpg

http://projecttwin.com/files/bignlittle.jpg

[clodman666]

Base: moddified diaz ds-1
Body: 1990 ford bronco
Esc: lrp runner plus
Motor: integy 55turn
Tranny: locked pede
Axles: locked tlt
Tires: imex all t's
Wheelbase: 12"
Width: 11"
Diff. clearance: 2"
Center clearance: 3.75"
Height: 9.75"
Weight: >6lbs

http://i64.photobucket.com/albums/h171/evman666/bronco5.jpg

[NP435]

F-100
body;proline f-100
frame;my custom steel bent with brush guard
tires;boggers
wheels;stadium blitzer rears w/inner bead cut off
trans;pede-locked
axles;tlt, rear locked, front limited slip-not open
motor; mag mayhem
other mods; frame mounted steering, rear leafs (jugg), custom front radius arm/track bar Ford style suspension, rear bumper off a kyosho trakker
http://i56.photobucket.com/albums/g169/bronco69/10-1.jpg
http://i56.photobucket.com/albums/g169/bronco69/d7.jpg
http://i56.photobucket.com/albums/g169/bronco69/13-1.jpg
http://i56.photobucket.com/albums/g169/bronco69/12-1.jpg

[run2jeepn]

"RAMROD"
http://memimage.cardomain.net/member_images/12/web/2448000-2448999/2448814_57_full.jpg

[4RunnerKid]

Truck Base : home-built steel frame

Body: HPI Escalade

ESC: Rooster

Motor(s): Integy 55t

Servo(s): Hitec 645

Trans: Pede, locked with bearings

Axles: TLT, locked with bearings

Tires: Geolanders

WB: ~10"

Weight: enough...

http://www.supermotors.net/getfile/458175/fullsize/img-178.jpg
http://www.supermotors.net/getfile/458154/fullsize/img-121.jpg
http://www.supermotors.net/getfile/458169/fullsize/img-172.jpg
http://www.supermotors.net/getfile/458178/fullsize/img-181.jpg
http://www.supermotors.net/getfile/458387/fullsize/img-187.jpg

[microgoat]

Box stock with a Novak Crawler system.

[ColquittCustom405]

CreppyCrawlers C-10......

[DISTURBIN' tha PEACE]

Truck Base : BTF Evil Bastard by Hulkworks

Body: Rubicon hood w/lexan panels

ESC: TR2

Motor(s): Integy 55t

Servo(s): Hitec 645 x 3

Trans: Stealth, locked with bearings

Axles: TLT, locked with bearings

Tires: 2.2 M2K's

WB: 13.5

Weight: heavy



http://i23.photobucket.com/albums/b364/DTP420/Evil%20Bastard/Moab153.jpg

http://i23.photobucket.com/albums/b364/DTP420/Evil%20Bastard/Moab154.jpg

http://i23.photobucket.com/albums/b364/DTP420/Evil%20Bastard/Moab151.jpg

http://i23.photobucket.com/albums/b364/DTP420/Evil%20Bastard/Moab152.jpg

http://i23.photobucket.com/albums/b364/DTP420/Evil%20Bastard/Moab155.jpg

[NP435]

F-350 HIGHLIFT
NARROWED CLAW DAWGS
NARROWED 2.2'S
http://i56.photobucket.com/albums/g169/bronco69/done3.jpg
http://i56.photobucket.com/albums/g169/bronco69/done6.jpg

[Varv]

no mods yet but she fly's with the brushless lol

http://i27.photobucket.com/albums/c175/Varv/DSC00164.jpg
Love this thing so far

[neo]

Well, she's finished now. I have fitted the TLT wheels/tires just to see what it looks like, still undecided though.
Pretty pleased with the result overall."thumbsup"

http://img.photobucket.com/albums/v169/neo010969/DSC_0205.jpg
http://img.photobucket.com/albums/v169/neo010969/DSC_0201.jpg
http://img.photobucket.com/albums/v169/neo010969/DSC_0211.jpg
http://img.photobucket.com/albums/v169/neo010969/DSC_0206.jpg
http://img.photobucket.com/albums/v169/neo010969/DSC_0204.jpg

[pigeonfarmboy]

My Army!
http://homepage.mac.com/pigeonfarmboy/.Public/RC/Scalers.jpg

[swamped2a]

Truck Base : AMT snap-fit toyota chief 4x4

Body: AMT '80 toyota hilux

ESC: ES-01

Motor(s): HS-85bb servo

Servo(s):hitech HS-50

Trans: SSMT trans, cut down

Axles: SSMT

Tires: Aoshima Swampers

WB: 4 1/2"

Overall Width: 3 3/4"

Diff clearance: less than 1/2 inch

Center Chassis clearance: just shy of 1"

Overall height: 3 1/4"

Weight: 8.1 ounces haha



http://i29.photobucket.com/albums/c260/88swampedmj/flex.jpg

http://i29.photobucket.com/albums/c260/88swampedmj/flex2.jpg

http://i29.photobucket.com/albums/c260/88swampedmj/underside.jpg

[4stAir]

heres my staticX bronco....

[H I R O]

http://blue.ap.teacup.com/applefx/img/1169449651.jpg

[foodstamp]

truck.....red neck

Truck Base :custum chassis, with a tlt axil

Body: clod body with a cowl induction hood, and i dont have new pics, but i have a stainless grill

ESC:tekin 2

Motor: 55T Lathe

Servo: Hitec 645 ms

Trans:the new rustler tranns

Axles: TLT-1.

Springs: Jugg leaf springs

Tires: swamper boggers

WB: 11"

Overall Width: tlt axil width

Diff clearance:idk

Center Chassis clearance: alot

Overall height: idk

Weight: about 9 lbs

<p>http://i72.photobucket.com/albums/i188/foodstampscrawlers/IM000194sm.jpg
<p>http://i72.photobucket.com/albums/i188/foodstampscrawlers/IMG_1062.jpg
<p>http://i72.photobucket.com/albums/i188/foodstampscrawlers/IM000174.jpg
<p>http://i72.photobucket.com/albums/i188/foodstampscrawlers/IM000184.jpg

[Just Zach]

Truck Base :TLT w/ K2-3L chassis

Body:Proline Ford Courier

ESC:Novak

Motor(s):Integy 55t

Servo(s):Hitec

Trans:Pede

Axles:TLT Locked

Tires:Moab 2.2

WB: 12"
http://img54.imageshack.us/img54/7554/midnight3jt2.th.jpg (http://img54.imageshack.us/my.php?image=midnight3jt2.jpg)
http://img54.imageshack.us/img54/7195/midnight1ng7.th.jpg (http://img54.imageshack.us/my.php?image=midnight1ng7.jpg)
http://img54.imageshack.us/img54/2184/midnight2lp5.th.jpg (http://img54.imageshack.us/my.php?image=midnight2lp5.jpg)

[Metal Masher]

Truck: Wrinkles

Truck Base : Mountaineer

Body: Hand formed Aluminum

ESC: Novak Rooster

Motor(s): Zipp 27T mod

Servo(s): JR Z250

Trans: 1st Gen Losi Junior

Axles: Stock Mountaineer

Tires: 1/18 Nylint

WB: 11 3/8"

Overall Width: 10"

Diff clearance: 1" :roll:

Center Chassis clearance: 1 3/4"

Overall height: 7 1/4"

Weight: 13.5 LBS

http://offroadworld.tenmagazines.com/gallery/crash076/151289.jpg

http://offroadworld.tenmagazines.com/gallery/crash076/151290.jpg

http://offroadworld.tenmagazines.com/gallery/crash076/151291.jpg

http://offroadworld.tenmagazines.com/gallery/crash076/151292.jpg

[brendan h]

Truck Base : TLT

Body:Nissan titan

ESC:LRP Airunner (waterproof one)

Motor(s):55t

Servo(s):hitec 645mg. winch=savage steering one

Trans:pede

Axles:tlt

Tires:moabs (narrowed claw dawgs to come)

WB: 11.5inch

Overall Width:NA

Diff clearance:NA

Center Chassis clearance:3.3inch

Overall height:NA

Weight:alot

http://i2.photobucket.com/albums/y6/brendan_454/DSC02371.jpg
http://i2.photobucket.com/albums/y6/brendan_454/DSC02362.jpg
http://i2.photobucket.com/albums/y6/brendan_454/DSC02357.jpg

[DISTURBIN' tha PEACE]

Truck Base : Bruiser

Body: Toyota

ESC: SR

Motor(s): Integy 55t

Servo(s): Hitec 9599TG

Trans: Pede, locked with bearings

Axles: Bruiser fronts, w/ bearings

Tires: Geolanders

WB: ~11

Weight: heavy


http://i23.photobucket.com/albums/b364/DTP420/Bruiser/Bruiser130.jpg

http://i23.photobucket.com/albums/b364/DTP420/Bruiser/Bruiser127.jpg

http://i23.photobucket.com/albums/b364/DTP420/Bruiser/Bruiser128.jpg

http://i23.photobucket.com/albums/b364/DTP420/Scale%20Crawling/Scalers019.jpg

http://i23.photobucket.com/albums/b364/DTP420/Scale%20Crawling/Scalers003.jpg

[TwistedCreations]

Here is my Yota.. Still have a ton of work to do to it.

Truck Base : TLT/ Toyota

Body: Mcallister Toyota truck

ESC: Mtroniks waterproof

Motor(s): 22t MM motor

Servo(s): Hobbico CS- 70's

Trans: Emaxx

Axles:TLT

Tires: 2.2 swamp dawgs on Kyosho 4runner wheels

WB: 12"

Overall Width: 9 1/2"

Diff clearance: 1 1/2"

Center Chassis clearance: 3"

Overall height: 8 1/2"

Weight: 7lbs.

http://www.rccrawlermedia.com/rcc-albums/album48/IMG_0524.sized.jpg

http://www.rccrawlermedia.com/rcc-albums/album48/DSCF2131_Medium_Small.jpg

http://www.rccrawlermedia.com/rcc-albums/album48/DSCF2141_Medium_Small.jpg

Click for more pics (http://www.rccrawlermedia.com/rcc-gallery/album48)

Click for build thread (http://www.rccrawler.com/forum/showthread.php?t=46356&highlight=toyota)

[BigBaller]

http://i124.photobucket.com/albums/p12/Minnmaxxer/IMG_0935.jpg
Hilift
Novak Brushless Crawler system
JR9000T swinging the front tires
Hitec 645 shifter
4200 stick pack in frame
body lift mod
RC4WD narrow beadlocks
RC4WD 12mm wheel wideners

I loved the look so much I went right out and bought another brother."thumbsup" No no silly, the brother to this Hilift.:lol:
http://i124.photobucket.com/albums/p12/Minnmaxxer/IMG_0908.jpg

[RydeFab]

homemade aluminum ladder chassis, f650, tekin rebel 2, 55t lathe,

hitec 5955, losi xx-t trans, tlt axles, imex swampers on imex wheels,

14" wheelbase, 3/4 eliptical juggy leaves in front, 4 link in rear,

homemade front, rear, and rack out of 1/4" steel brakeline,

heavy weight...........................................

http://i74.photobucket.com/albums/i275/rnstech05tacoma/DSC00319.jpg

[Rockatansky]

Well, I got to looking at the Tamiya M03 FWD chassis and noticed the wheelbase would be close to the Midnight Pumpkin's shell. Turns out, it was a perfect fit. I mounted some HPI "vintage" series wheels and tires to complete the look for a nice "hot-rodded" truck. Click the link below to see the truck, and a couple of others too. ENJOY.

http://miamireiki.com/crawler_page.htm

Cheers

"Mini Cooper" M03 chassis
FWD not locked
Manta-Ray adjustable ball diff
Midnight Pumpkin body
HPI "Vintage" series rims
HPI "Vintage" series tires
Overall length is approx 12"

[elaz]

Truck Base : Jugg

Body: F-350

ESC: Super Rooster

Motor(s): 2x reedy 19Turns

Servo(s): ERG WRX (SANWA)

Trans: JUGG

Axles:JUGG

Tires: 2.2 PROLINE MOAB

WB: 12"

Overall Width: 11 3/4"

Diff clearance: 1 1/4"

Center Chassis clearance: 4 1/4"

Overall height: 11"

http://i101.photobucket.com/albums/m80/elaz_74/RC/P1040186.jpg

http://i101.photobucket.com/albums/m80/elaz_74/RC/P1040187.jpg

http://i101.photobucket.com/albums/m80/elaz_74/RC/P1040195.jpg

http://i101.photobucket.com/albums/m80/elaz_74/RC/P1040197.jpg

http://s101.photobucket.com/albums/m80/elaz_74/RC/

[envious8420]

Truck Base :sassy chassis for a clod

Body:modded clod

ESC:novak

Motor(s):old stock motor

Servo(s):traxxas 2055

Trans:losi xxxnt

Axles:tlt

Tires:front modded nylint, rear nylint tires on a modded tlt wheel

WB:12in.

Overall Width:9.5in.

Diff clearance:5/8in.

Center Chassis clearance:1 and 3/8in.

Overall height:8in.

Weight:4lbs.



http://www.clodtalk.com/files/100_7078_127.jpg
http://www.clodtalk.com/files/100_7077_127.jpg
http://www.clodtalk.com/files/100_7066_207.jpg
http://www.clodtalk.com/files/100_7046_577.jpg
http://www.clodtalk.com/files/100_7045_123.jpg

[Crawln Coles]

http://i105.photobucket.com/albums/m231/crawln_coles/ebay072.jpg

Here's the specs:

Bruiser chassis
turned down TLT shocks
RC4WD R2 tranny
35T drift motor
Yokomo drift ESC
Spectrum rx
narrowed revolvers
cut and shut dirt works

Headlights
http://i105.photobucket.com/albums/m231/crawln_coles/ebay073.jpg

Maxx Flex
http://i105.photobucket.com/albums/m231/crawln_coles/ebay074.jpg

[microgoat]

Here's my latest:

Hi-Lift chassis
homemade IH Scout body
narrowed Imex Claws
homemade spoke rims
Novak Crawler system

[raul duke]

My Rubi K2-3L

-Working winch and lights.
-Homemade front and rear bumpers.
-Homemade rock sliders, tire carrier and roof rack.
-Homemade 1.9 mashers on HPI 6mm offsets wheels
-K2-3L chassis
-Locked pede tranny and tlt diffs
-Rebel II esc, 45T lathe w/90t spur and 21t pinion


http://i141.photobucket.com/albums/r50/climberx/IMG_1520.jpg

http://i141.photobucket.com/albums/r50/climberx/DSCN8064.jpg

http://i141.photobucket.com/albums/r50/climberx/IMG_1532.jpg

[mwoo]

Truck Base : Bruiser

Body: Bruiser

ESC: Novak SD

Motor(s): Integy 55t

Servo(s): Hitec 645

Trans: Stock Bruiser

Axles: Bruiser / front springs / rear 4 link

Tires: M2K

WB: 11.75

Overall Width: ?

Diff clearance: ?

Center Chassis clearance: ?

Overall height: ?

Weight: 10.5

Working on a winch

http://i146.photobucket.com/albums/r265/mwoo408-rc/_DSC3309.jpg
http://i146.photobucket.com/albums/r265/mwoo408-rc/DSCN3521.jpg

[KeithLuneau]

Here's one of mine...

Truck Base : Custom CNC chassis from REC

Body: HPI Land Rover

ESC: Novak 610HRV (old school!)

Motor(s): Permax 600

Servo(s): Unknown brand high torque metal gear

Trans: Stampede

Axles: Run of the mill TLTs

Tires: Geolandars on narrowed Pede rears

WB: 11.25"

Overall Width: 9.25"

Diff clearance: ~1"?

Center Chassis clearance: 'bout 3"

Overall height: about 9.5"

Weight: TBD

More pictures can be found here - http://www.scale4x4rc.org/gallery/thumbnails.php?album=64

Others are here - http://www.scale4x4rc.org/gallery/index.php?cat=10001

http://www.scale4x4rc.org/gallery/albums/userpics/10001/5.jpg

http://www.scale4x4rc.org/gallery/albums/userpics/10001/2.jpg

[fokai]

Bruiser Scaler

Truck Base :Tamiya Bruiser

Body:Tamiya Bruiser

ESC:Mamba 25

Motor(s):RevolveR 2

Servo(s):HS645-MG

Trans:Stampede

Axles:TLT locked with full bearings

Tires: HPI Geolandars

Weight: 5lbs.

Other: Four-linked rear, diaz design leaf springs up front, fat rock axle-c's.

http://img.photobucket.com/albums/v734/gilaguon/100_1765.jpg http://img.photobucket.com/albums/v734/gilaguon/100_1766.jpg

http://img.photobucket.com/albums/v734/gilaguon/100_1770.jpg

[wiebs6]

http://i114.photobucket.com/albums/n245/wiebs6/RC%20Crawler/IMG_0585.jpg

http://i114.photobucket.com/albums/n245/wiebs6/RC%20Crawler/IMG_0577.jpg

http://i114.photobucket.com/albums/n245/wiebs6/RC%20Crawler/IMG_0579.jpg

http://i114.photobucket.com/albums/n245/wiebs6/RC%20Crawler/IMG_0578.jpg

[ColquittCustom405]

Bruiser
-EMaxx tranny
-TLT axles
-Bruiser Chassis
-Novak SD ESC
-Integy 55t motor
-RC4WD beadlocks

[tz-01]

this is my high lift
3 speed trany
lockable diffs
2.2 swamp dogs
shackle revesal
http://www.putfile.com/pic.php?img=4792538
http://img1.putfile.com/thumb/2/4715430617.jpg (http://www.putfile.com/pic.php?img=4792538)

[west virginia krawler]

Everythings custom

frame= custom
body= effed up rubi
motor= integy 55t
tranny= XXXT
tires= boggers
axles= tlt locked up
other= custom bumpers, custom leaf springs, custom roll cage, and leaf spring mounts
http://i140.photobucket.com/albums/r21/wvk_2006/879123.jpg
http://i140.photobucket.com/albums/r21/wvk_2006/879117.jpg
http://i140.photobucket.com/albums/r21/wvk_2006/879127.jpg

[axelsnapr]

Here is my latest project. I won the body from "RCP CRAWLERS" at a comp this year! The chassis is homemade. It's your basic rig! 55turn, tlt axles, swampers, It's got a host of scale goodies on it! I am work'n on a winch for it right now. Sorry bout pic quality, it's from a cel! http://img50.imageshack.us/img50/7535/brncolitjs0.png (http://imageshack.us)http://img238.imageshack.us/img238/5978/brncolit3lr4.png (http://imageshack.us)

[PinchFlat]

My K2-3L 2.2 class rig (I know they are 1.9 rims but under the UTRCRC STR rules it is a 2.2 - 3.75" tire height max in 1.9 class) Besides... 2.2 rims don't look scale at all well passable is they have a 5" tire on them.

[ARMRASTLER]

CRAWLING AROUND MOSS LANDING
3/11/07http://i106.photobucket.com/albums/m245/ARMRASTLER_2006/HPIM1177.jpg

[1BadJeepBruiser]

Nao/Dave pack built F350 Truggy

http://img.photobucket.com/albums/v73/ihaveabruiser/Bryans%20house%20Dec%201/Bryanshousedec1033.jpg
http://img.photobucket.com/albums/v73/ihaveabruiser/Bryans%20house%20Dec%201/Bryanshousedec1030.jpg

[zumzum5150]

11 in WB

K2-3s Chassis

HPI Geolander and schorch wheels

55T motor

Tamiya corsa grey paint (looks white)

Moped Esc

Airtronics M8 radio

pede tranny

[suiza]

FJ40:11 in wb , home made chassis, links,bumbers ,moabs and narrowed pede wheels,magnetic mayhem,pede tranny,and not ready "thumbsup" http://img142.imageshack.us/img142/3903/tlt038ox9.jpg

[mascman]

Rubicon Body
SW2 chassis
12" WB
http://img.villagephotos.com/p/2002-12/76747/02200002.JPG

http://img.villagephotos.com/p/2002-12/76747/March%2011th%20GTG%20-%20JRN%20799.jpg

http://img.villagephotos.com/p/2002-12/76747/March_11th_GTG___JRN_807.jpg

[polyophio]

Specs:
K2-3L Chassis
Tlt axles
Pede trans
16/87 gearing
35t lathe
Moabs on stock pede fronts
Custom bumpers
Winch


http://i15.photobucket.com/albums/a361/polyophio/March%2025th%2007%20Land%20rover/PICT0037.jpg
http://i15.photobucket.com/albums/a361/polyophio/March%2025th%2007%20Land%20rover/PICT0044.jpg
http://i15.photobucket.com/albums/a361/polyophio/March%2025th%2007%20Land%20rover/PICT0046.jpg
http://i15.photobucket.com/albums/a361/polyophio/Nelson%20Ledges/PICT0060.jpg
http://i15.photobucket.com/albums/a361/polyophio/Nelson%20Ledges/PICT0062.jpg

[Hellisforheroes]

truck base: TLT avec Custom chassis

Trans: stampede

Motor: old skool 55t lathe

Body: Proline Nissan Titan

WB: 350mm (12 inches in mickey mouse)

overall width: 250mm

overall length: fawk-nose

pics


http://i153.photobucket.com/albums/s225/FlamingServo/DSC01771.jpg

http://i153.photobucket.com/albums/s225/FlamingServo/DSC01789.jpg

http://i153.photobucket.com/albums/s225/FlamingServo/DSC01778.jpg

[mikestoys]

my 2.2s... bronco body is a K2-3L chassis with 65T on pede tranny... dodge truck body is an SW2 with 55T on pede tranny... both with 12 inch wheelbase on swamp dawg tires...

http://a909.ac-images.myspacecdn.com/images01/17/l_46612aa93d6542b7903b8ab67a052b3c.jpg

[joeshacks]

Truck Base : PTI Goliath

Body: Jeep Rubicon

ESC: Novak XRS

Motor(s): Integy 55t Lathe Motor

Servo(s): JR Racing

Trans: GD-600 Gear Reduction

Axles: PTI Axles

Tires: Proline Mashers

WB: 12.5 inches

http://joedesigns.com/stuff/rc_stuff/jeep1.jpg

http://joedesigns.com/stuff/rc_stuff/jeep2.jpg

[Raney120]

http://i150.photobucket.com/albums/s82/washracer_11/crawler1.jpg
http://i150.photobucket.com/albums/s82/washracer_11/crawler2.jpg

[Raney120]

http://i150.photobucket.com/albums/s82/washracer_11/crawler3.jpg

[72Blazer]

Home made ladder frame
Bushwacker
Novak XRS
Integy 45t
Tower Pro MG945
Wheely King tranny w/clocked motor
TLT axles
Swamp Dogs on HPI Scorch wheels
home made balsa/mahogony surfboards
http://img.photobucket.com/albums/v143/roberte/DSCN2306.jpg
http://img.photobucket.com/albums/v143/roberte/DSCN2313.jpg
http://img.photobucket.com/albums/v143/roberte/DSCN2294.jpg

[ROC LOBSTER]

NEW BRIGHT BODY,WINCH,GEO LANDER TIRES ON RC4WD BEADLOCKS,HOLMES HOBBIES REVOLVER 2 MOTOR,MAMBA ESC,RC4WD R2 TRANNY, 4200 BATT,ORION RX BATT,REIGN K3-S CHASSIS, ADDED SNORKEL,FAIREAD AND A HI LIFT JACK TODAY(NOT IN PHOTO YET)
http://i145.photobucket.com/albums/r229/TREE68/116_1639.jpg

[Jeeper Creeper]

I bought this chassis on the bay about a year or so ago. It is really well made and drive great. Anyone know who made it?

http://i171.photobucket.com/albums/u305/silvercj/100_0652.jpg

http://i171.photobucket.com/albums/u305/silvercj/100_0178.jpg

http://i171.photobucket.com/albums/u305/silvercj/100_0177.jpg

http://i171.photobucket.com/albums/u305/silvercj/100_0175.jpg

[bbyrd22]

First TLT/Crawler/Scalish Build. Just followed the build document found on the Reign web site.

K2-3L Chassis
Rubicon
Novak ESC
Axiom Motor
Hitec Servo
Stampede Tranny
TLT Axles
Moabs on MSD Beadlocks

[bbyrd22]

#2 K2-3L Build.

K2-3L Chassis
Hummer
Novak ESC
Integy Lathe
Hitec Servo
Stampede Tranny
TLT Axles
RC4WD Beadlocks w/ Imex Swampers

[K_B]

Truck Base : MFM Racing frame

Body: Guess!

ESC: Mamba-25

Motor(s): Original Gangsta HH Revolver

Servo(s): HS-645-MG

Trans: Stealth B2

Axles: TLT

Tires: HPI Geolandars on RC4WD Super Narrow beadlocks

WB: 12.5" (soon to be 12")

Overall Width: Not very wide

Diff clearance: Not very much

Center Chassis clearance: ~3"

Overall height: 12"?

Weight: ~6 lbs.

[AIPOHAKU]

My 4runner...before..

http://i98.photobucket.com/albums/l256/aipohaku_2006/4runnah/IMG_6964.jpg

http://i98.photobucket.com/albums/l256/aipohaku_2006/4runnah/IMG_6965.jpg

http://i98.photobucket.com/albums/l256/aipohaku_2006/4runnah/IMG_6974.jpg

...after

http://i98.photobucket.com/albums/l256/aipohaku_2006/4runnah/IMG_7731.jpg

http://i98.photobucket.com/albums/l256/aipohaku_2006/4runnah/IMG_7732.jpg

http://i98.photobucket.com/albums/l256/aipohaku_2006/4runnah/IMG_7734.jpg

[poetofwar]

My two scales

F-350
1/2 body lift
2.2 MOAbs
http://i42.photobucket.com/albums/e305/poetofwar/NewF-350.jpg


TLT Rubi
65T
Tex Recv
XL-1 ECS
MOABs

http://i42.photobucket.com/albums/e305/poetofwar/147802895_485127132_0.jpg

[fletch]

http://img513.imageshack.us/img513/3384/sd033tq7.jpg
http://img259.imageshack.us/img259/3232/sd016rj8.jpg
http://img503.imageshack.us/img503/1852/sd045de7.jpg

[mwoo]

Redo of my Bruiser with a D90 body.

http://i146.photobucket.com/albums/r265/mwoo408-rc/D90%20Bruiser/DSCN3767.jpg

http://i146.photobucket.com/albums/r265/mwoo408-rc/D90%20Bruiser/DSCN3779.jpg

[Crawler Noob]

http://img522.imageshack.us/img522/2699/p1200005ai1.jpg

my tlts.

[LEWIS]

to much to list F350 is a scaler. the jeep is a 2.2 tlt what is left it

[D.I.L.L.I.G.A.F.]

here mine...


http://i45.photobucket.com/albums/f66/veromanvero/Picture330-1.jpg

http://i45.photobucket.com/albums/f66/veromanvero/Picture331-1.jpg

http://i45.photobucket.com/albums/f66/veromanvero/Picture332-1.jpg

[Edward531]

http://i154.photobucket.com/albums/s265/Edward531/P5271038.jpg

[Edward531]

http://i154.photobucket.com/albums/s265/Edward531/P5271026.jpg

[zumzum5150]

;-)

[sods]

Truck Base : bb51

Body: 73' bronco

ESC: traxxas xl5

Motor(s): integy 45t

Servo(s): hitec 645's(one for steering, one for winch both chassis mounted)

Trans: pede

Axles: tlt

Tires: moabs

WB: 11 3/4"

Overall Width: 10 3/8"

Diff clearance: 1 3/4"

Center Chassis clearance: 3 1/8"

Overall height: 10"

Weight: 9+

[BlueMonster]

http://www.bluemonster-rc.com/Bruiser/bruiser_064.jpg

[Edward531]

http://i154.photobucket.com/albums/s265/Edward531/P6050839.jpg

http://i154.photobucket.com/albums/s265/Edward531/P6050838.jpg

http://i154.photobucket.com/albums/s265/Edward531/P6050830.jpg

http://www.youtube.com/watch?v=bwCrJZG4-jg

[cyberhog05]

http://i187.photobucket.com/albums/x270/cyberhog/Fj40pix009.jpg

[Mongo]

Here's my C-10

[midget_man1387]

First Scale Truck

"Red Rover"

ripper7racing HellCAT chassis
Integy 55t
Stampede Tranny
TLT Axles
Tower Pro 945mg
Axial Beadlocks

http://i199.photobucket.com/albums/aa206/midget_man1387/IMG_1295.jpg

http://i199.photobucket.com/albums/aa206/midget_man1387/IMG_1296.jpg

http://i199.photobucket.com/albums/aa206/midget_man1387/NOSTR/IMG_1277.jpg

http://i199.photobucket.com/albums/aa206/midget_man1387/NOSTR/IMG_1282.jpg

[steve350]

http://i129.photobucket.com/albums/p236/stevesaudi/gg.jpg
http://i129.photobucket.com/albums/p236/stevesaudi/Photo-0035.jpg
http://i129.photobucket.com/albums/p236/stevesaudi/Photo-0036.jpg
http://i129.photobucket.com/albums/p236/stevesaudi/Photo-0037.jpg
http://i129.photobucket.com/albums/p236/stevesaudi/Photo-0039.jpg
http://i129.photobucket.com/albums/p236/stevesaudi/dd.jpg
http://i129.photobucket.com/albums/p236/stevesaudi/Photo-0034.jpg
http://i129.photobucket.com/albums/p236/stevesaudi/rtt.jpg
http://i129.photobucket.com/albums/p236/stevesaudi/Photo-0038.jpg

http://i129.photobucket.com/albums/p236/stevesaudi/ooo.jpg

http://i129.photobucket.com/albums/p236/stevesaudi/ggg.jpg


f350. custom cage, 2.2 geolanders, diffs locked, waterproof electrics, 20mm shackel lift, steering servo up front.

[RCJunkie80]

This is the second Gen of my LR3 build first Gen just didn't perform that well. The specs are in a build thread. Hard Bodies are too top heavy and fragile for good KRAWLIN!
http://i185.photobucket.com/albums/x266/Dickie80/YOTA009.jpg
http://i185.photobucket.com/albums/x266/Dickie80/beachfishing003.jpg
http://i185.photobucket.com/albums/x266/Dickie80/YOTA001.jpg
http://i185.photobucket.com/albums/x266/Dickie80/YOTA002.jpg

[Bystrom]

That's a nice looking rig! I'm getting myself a roll cage from rccubed and will hook it up to my TLT. Hope to post some pictures soon. I'm a newbie, will I need to have wheel widerners?

[steve350]

a little update! loads of work and its now green with 4link suspension.
ordered some RC channel metal axles so when they're fitted i'l be taking some pics out on the rocks:)

http://i129.photobucket.com/albums/p236/stevesaudi/hjh.jpg

http://i129.photobucket.com/albums/p236/stevesaudi/hhyy.jpg


http://i129.photobucket.com/albums/p236/stevesaudi/hjgg.jpg

http://i129.photobucket.com/albums/p236/stevesaudi/ppppp.jpg

[rockwell]

-Custom frame
-Custom tube work
-Custom roof rack
-Scale accessories
-Working lights
-Intellispeed 8T Speed control
-Pede tranny
-55T lathe
-22T pinion
-87T spur
-Moabs
-Traxxas radio gear
-mg645

Here's her maiden voyage
http://i74.photobucket.com/albums/i263/rockcrawler07/Courier/DSC05975.jpg

Custom homemade wheels
http://i74.photobucket.com/albums/i263/rockcrawler07/Courier/Backyard.jpg

And as she stands today

http://i74.photobucket.com/albums/i263/rockcrawler07/Courier/DSCN0578.jpg

http://i74.photobucket.com/albums/i263/rockcrawler07/Courier/DSCN0580.jpg

http://i74.photobucket.com/albums/i263/rockcrawler07/Courier/DSCN0586.jpg

http://i74.photobucket.com/albums/i263/rockcrawler07/Courier/DSCN0589.jpg

http://i74.photobucket.com/albums/i263/rockcrawler07/Courier/DSCN0592.jpg

http://i74.photobucket.com/albums/i263/rockcrawler07/Courier/DSCN0591.jpg

[young_version]

old pics but:
http://i5.photobucket.com/albums/y176/brokeneg/DSCF1607.jpg
http://i5.photobucket.com/albums/y176/brokeneg/DSCF1271.jpg
http://i5.photobucket.com/albums/y176/brokeneg/DSCF1231.jpg
http://i5.photobucket.com/albums/y176/brokeneg/DSCF1022.jpg
"thumbsup"

[4x4dodge]

4x4 Wheely King
MFM chassis
Arrow shaft links
Xl-5 ESC
55T lathe motor
Hitec 645mg servo
Moab 2.2s
Axial Bead Locks
HPI Jeep Rubicon body

http://i172.photobucket.com/albums/w7/4x4dodge1989/100_2560.jpg

http://i172.photobucket.com/albums/w7/4x4dodge1989/100_2574.jpg

http://i172.photobucket.com/albums/w7/4x4dodge1989/100_2582.jpg

http://i172.photobucket.com/albums/w7/4x4dodge1989/100_2585.jpg

http://i172.photobucket.com/albums/w7/4x4dodge1989/100_2939.jpg

http://i172.photobucket.com/albums/w7/4x4dodge1989/100_2945.jpg

http://i172.photobucket.com/albums/w7/4x4dodge1989/100_2571.jpg

[AIPOHAKU]

http://i98.photobucket.com/albums/l256/aipohaku_2006/Tow%20Rig/IMG_8828.jpg
http://i98.photobucket.com/albums/l256/aipohaku_2006/Tow%20Rig/IMG_8859.jpg
http://i98.photobucket.com/albums/l256/aipohaku_2006/Tow%20Rig/IMG_8860.jpg
http://i98.photobucket.com/albums/l256/aipohaku_2006/Tow%20Rig/IMG_8842.jpg

[AIPOHAKU]

http://i98.photobucket.com/albums/l256/aipohaku_2006/Crawler%20Hauler/IMG_6945.jpg
http://i98.photobucket.com/albums/l256/aipohaku_2006/Crawler%20Hauler/IMG_6950.jpg
http://i98.photobucket.com/albums/l256/aipohaku_2006/Crawler%20Hauler/IMG_6946.jpg

[NSR_CIVIC]

My First Attempt At A Scaler"thumbsup"

Truck Base : home made K2-3L

Body: original FJ40 (not wacker) 8)

ESC: dynamite Tazer 15t

Motor(s): integy lathe 75t

Servo(s): tower pro mg945r (steering) s3001 (shift)

Trans: "TOP SECRET 2 SPEED" :twisted:

Axles: TLT

Tires: 2.2 moabs

WB: 12"+

Overall Width: 10"

Diff clearance: 1.5"

Center Chassis clearance: 3"

Overall height: 12"

Weight: :?:

PIX!!

http://i146.photobucket.com/albums/r248/NSR4life/IMG_4011.jpg
http://i146.photobucket.com/albums/r248/NSR4life/IMG_4003.jpg
http://i146.photobucket.com/albums/r248/NSR4life/IMG_4004.jpg
http://i146.photobucket.com/albums/r248/NSR4life/IMG_4022.jpg
http://i146.photobucket.com/albums/r248/NSR4life/IMG_4024.jpg
http://i146.photobucket.com/albums/r248/NSR4life/IMG_4034.jpg
http://i146.photobucket.com/albums/r248/NSR4life/IMG_4033.jpg
http://i146.photobucket.com/albums/r248/NSR4life/IMG_4037.jpg
http://i146.photobucket.com/albums/r248/NSR4life/IMG_4035.jpg

[Mriswith]

My first real scale attempt

Truck Base : Mriswith built custom 1/8" Alumn.
Body: Pro-Line Bushwacker
ESC: Tekin Rebel 2
Motor(s): Divorced rear chassis mounted Integy 35T Lathe/GD-600 combo
Servo(s): Hitech 645MG
Trans: Stampede
Axles: TLT
Tires: HPI Geolandars
See my build up thread FJ-4-Link for the rest.

http://i42.photobucket.com/albums/e317/Mriswith13/FJ%20TLT%20Gen1/FJRiverRun01.jpg

http://i42.photobucket.com/albums/e317/Mriswith13/FJ%20TLT%20Gen1/FJRiverRun02.jpg

http://i42.photobucket.com/albums/e317/Mriswith13/FJ%20TLT%20Gen1/FJRiverRun03.jpg

[bmuzz1]

This is my first attempt at a scaler and my first crawler.
55t Integy lathe motor
Novak XRS
HItec 645 servo
home made exo cage
home made storage rack and bungee cords
43242

43243

43244

43245

[59sled]

Bruiser with clod body
K2-3s with high lift body
http://i220.photobucket.com/albums/dd160/1959sled/trucks011.jpg
http://i220.photobucket.com/albums/dd160/1959sled/trucks014.jpg
http://i220.photobucket.com/albums/dd160/1959sled/trucks012.jpg
http://i220.photobucket.com/albums/dd160/1959sled/trucks021.jpg

[BGGruff]

Truck: D90
Chassis: K2-3L
Tranny: Black R2
Axles: Locked TLTs w/ Alum Knuckles
Motor: Integy 55S w/ 8T Pinion
Suspension: Tamiya TA02 F150 Shocks/ 50 Wt Oil /Traxxas Links
Servo: HiTec 5645 w/ Handbros Servo Plate
ESC: LRP AI Runner
Radio: Futab TX/RX
Tires/Wheels: Losi Claws/White Axials w/ Green Rings
Accessories: Proline Roof Rack/HPI Bumpers and More

[sharpe351]

Truck: F350 HL
Chassis: Tamiya
Tranny: stock (locked in 3rd for now)
Axles: stock locked
Motor: 13.5 Brushless
Suspension: leaf front and rear (balled front and oil shock rear)
Servo: HiTec 645MG
ESC: XBR Brushless
Radio: KO Helios
Tires/Wheels: PL Moabs/Chrome Axials w/ Green Rings
Accessories: Mad Max styled brush guard, hand fabbed tubed flatbed
Pics:
http://i137.photobucket.com/albums/q223/sharpeshifter/PICT0016.jpg
http://i137.photobucket.com/albums/q223/sharpeshifter/PICT0015.jpg

[steve350]

my crew cab 350.

http://i129.photobucket.com/albums/p236/stevesaudi/657.jpg
http://i129.photobucket.com/albums/p236/stevesaudi/short.jpg
http://i129.photobucket.com/albums/p236/stevesaudi/yellow.jpg
http://i129.photobucket.com/albums/p236/stevesaudi/man1.jpg
http://i129.photobucket.com/albums/p236/stevesaudi/cage1.jpg

[Echodawg]

Here's my FJ-40 build. I regret not getting any action shots before I tore it down to start another build.

http://i23.photobucket.com/albums/b363/Echodawg/IMG_1039.jpg

[Mirage]

http://img210.imageshack.us/img210/1413/1000967az4.jpg (http://imageshack.us)

http://img404.imageshack.us/img404/9349/1000962fw9.jpg (http://imageshack.us)

http://img406.imageshack.us/img406/4552/1000954li8.jpg (http://imageshack.us)

http://img120.imageshack.us/img120/7295/1000969yk3.jpg (http://imageshack.us)

http://img502.imageshack.us/img502/1444/1000949xb3.jpg (http://imageshack.us)

http://img103.imageshack.us/img103/2309/1000951zh2.jpg (http://imageshack.us)

http://img517.imageshack.us/img517/4030/1000953ff9.jpg (http://imageshack.us)

http://img103.imageshack.us/img103/2545/1000956cv2.jpg (http://imageshack.us)

[SkorpionKing]

So here's my first attempt
Truck Base :All standard AX10 scorpion

Body:HPI D90

ESC:Tekin rebel 2

Motor(s):integy 55t

Servo(s):hitec 5645mg


http://www.ukrcrc.com/gallery/albums/userpics/normal_IMG_4714.JPGhttp://www.ukrcrc.com/gallery/albums/userpics/normal_IMG_4739.JPGhttp://www.ukrcrc.com/gallery/albums/userpics/normal_IMG_4705.JPGhttp://www.ukrcrc.com/gallery/albums/userpics/normal_IMG_4749.JPGhttp://www.ukrcrc.com/gallery/albums/userpics/normal_IMG_4709.JPG
and a couple with the hummer shell on
http://www.ukrcrc.com/gallery/albums/userpics/normal_IMG_4611.JPGhttp://www.ukrcrc.com/gallery/albums/userpics/normal_IMG_4626.JPG
more pic's and more to come in my gallery as well
http://www.ukrcrc.com/gallery/index.php?cat=10030
cheers guys"thumbsup"

[rockcrawler_101]

Here is my 6x6 t rex. here is the link to the build thread. http://www.rccrawler.com/forum/showthread.php?t=86295

http://i227.photobucket.com/albums/dd70/rockcrawler_101/S5000656.jpg
http://i227.photobucket.com/albums/dd70/rockcrawler_101/S5000653.jpg
http://i227.photobucket.com/albums/dd70/rockcrawler_101/S5000657.jpg
http://i227.photobucket.com/albums/dd70/rockcrawler_101/S5000658.jpg

[AIPOHAKU]

http://i98.photobucket.com/albums/l256/aipohaku_2006/JEEP%20TUBER/IMG_0582.jpg

http://i98.photobucket.com/albums/l256/aipohaku_2006/JEEP%20TUBER/IMG_0580.jpg

http://i98.photobucket.com/albums/l256/aipohaku_2006/JEEP%20TUBER/IMG_0577.jpg

[rock runt]

My effort
TLT, high lft leafs,45T, homemade chasiss



http://img145.imageshack.us/img145/8422/dsc02674ta1.jpg (http://imageshack.us)
http://img209.imageshack.us/img209/5569/dsc02671nm4.jpg (http://imageshack.us)

[Ollis-Mounty]

- Chassis: Homemade
- Axles: TLT-1 Axles, locked
- Tranny: Tamiya Bruiser
- Suspension: 4-link, Thunder Tiger Shocks with Cantilever
- Steering Servo: TowerPro MG-995
- Radio: Graupner D8
- Tires: Thunder Tiger Rims with Yokohama Geolander
- Driver: Terminator T-800
- Accessories: Winch, Lights, Junfac Underguard,

http://i16.photobucket.com/albums/b1/Manta16V/Bucket0005.jpg
http://i16.photobucket.com/albums/b1/Manta16V/Bucket0001.jpg
http://i16.photobucket.com/albums/b1/Manta16V/Bucket0004.jpg
http://i16.photobucket.com/albums/b1/Manta16V/Bucket0006.jpg
http://i16.photobucket.com/albums/b1/Manta16V/Bucket0002.jpg

[51WillysJeep]

The PSC "Bruiser" has a 55 turn Integy lathe motor, locked Pede tranny, and locked TLT-1 axles. This chassis took 2 1/2months to build. The 1/4 Aluminum tube frame was all hand-bent, filed, drilled and tapped.. The buildup thread is in the 2.2 section :)http://i162.photobucket.com/albums/t270/jeepman1977/HPIM3505.jpg
http://i162.photobucket.com/albums/t270/jeepman1977/HPIM3529.jpg
http://i162.photobucket.com/albums/t270/jeepman1977/HPIM3507.jpg
http://i162.photobucket.com/albums/t270/jeepman1977/HPIM3520.jpg

[impulse byer]

Locked Wheely King axles and stock trans. full tube chassis, mud slingers bla bla bla

http://img.photobucket.com/albums/v192/sikinthehead/crawling%20rc/DSC_0160.jpg

[Thundermaxx]

Babyota Bruiser Hybrid

Has a React Radio controlling Super Rooster feeding into an Axiom 55T. It's turning the Engle 4:1 tranny into some T-Rex 60's putting the power to the ground through some RC4WD narrowed Beadlocks wrap in Moabs. Topped off and protected by a Full Exo"thumbsup"

http://www.unlimitedengineering.com/gallery/files/6/1/8/0801096.jpg

http://www.unlimitedengineering.com/gallery/files/6/1/8/0801091.jpg

http://www.unlimitedengineering.com/gallery/files/6/1/8/0801093.jpg

http://www.unlimitedengineering.com/gallery/files/6/1/8/0801092.jpg

[Fracture]

My FJ

-modded highlift axles
-xx tranny with rc4wd reduction
-modded BFG's
-soldered steel cab, alu chassis&deck

build thread:
http://www.rccrawler.com/forum/showthread.php?p=1022973#post1022973

http://img247.imageshack.us/img247/1097/actions063xr4.jpg (http://imageshack.us)
http://img253.imageshack.us/img253/8093/action016wx6.jpg (http://imageshack.us)

Still a work in progress

[AIPOHAKU]

http://i98.photobucket.com/albums/l256/aipohaku_2006/4runnah/IMG_2657.jpg

http://i98.photobucket.com/albums/l256/aipohaku_2006/4runnah/IMG_2658.jpg

http://i98.photobucket.com/albums/l256/aipohaku_2006/4runnah/IMG_2660.jpg

http://i98.photobucket.com/albums/l256/aipohaku_2006/4runnah/IMG_2662.jpg

http://i98.photobucket.com/albums/l256/aipohaku_2006/4runnah/IMG_2665.jpg

http://i98.photobucket.com/albums/l256/aipohaku_2006/4runnah/IMG_2666.jpg

http://i98.photobucket.com/albums/l256/aipohaku_2006/4runnah/IMG_2667.jpg

http://i98.photobucket.com/albums/l256/aipohaku_2006/4runnah/IMG_2640.jpg

http://i98.photobucket.com/albums/l256/aipohaku_2006/4runnah/IMG_2648.jpg

[Sasquatchbagger]

Truck Base : Custom hand made aluminum chassis

Body: Pro-line 80s Chevy Long Bed

ESC: Stock Wheely King Esc
Motor(s): Stock WK motor 27T / Great Planes Electrifly T-600 22T
Servo(s): Tower Pro MG995

Trans: Stock Wheely King
Axles:Stock Wheely King

Tires: Yokohama Geolandars/WK Mud Thrashers
WB: 12"
Overall Width: 11"
Diff clearance: 1" with Geolandars, a little more with Mud Thrashers

Center Chassis clearance: 3.5"

Overall height: 10"

Weight: 5lbs+

http://img337.imageshack.us/img337/9610/22stt6.jpg
http://img267.imageshack.us/img267/1695/dsc09997xv9.jpg
http://img267.imageshack.us/img267/4412/dsc09985om1.jpg

[toothless]

http://i254.photobucket.com/albums/hh86/toothless-1/DSC02034.jpg

[4u2c]

tlt axels
stampede trans/drive shafts
diaz frame
http://i200.photobucket.com/albums/aa173/photomakin/IMG_3000.jpg
http://i200.photobucket.com/albums/aa173/photomakin/IMG_3003.jpg

[mjh]

My 2.2 bruiser hybrid


Locked TLT axles

Axial Beadlocks and Rock Lizards

Original Bruiser Chassis

TLT Shocks

RC4WD Leaf springs and front hangers plus shackles

Clod front and Rear bumpers

Axial AX10 Tranny with Spur Gear

Waterproof electronics box

Novak 55t Motor

Custom painted Copper Blazer Body

http://i173.photobucket.com/albums/w77/cankickr/100_1473.jpg

http://i173.photobucket.com/albums/w77/cankickr/100_1481.jpg

[bmuzz1]

Pictures of my Wifes D90 build.

56222

56223

56224

56225

[kmedina]

Here is My Jeep

[mattman]

http://http://s244.photobucket.com/albums/gg36/mattp577/?action=view&current=chevypics020.jpg

[psychobilly78]

Hi .These are my scale offroad cars from Finland

http://kuvablogi.com/nayta/prev/img921595.jpg

http://kuvablogi.com/nayta/prev/img921634.jpg

http://kuvablogi.com/nayta/prev/img932138.jpg

http://kuvablogi.com/nayta/prev/img932137.jpg

http://kuvablogi.com/nayta/prev/img925683.jpg

http://kuvablogi.com/nayta/prev/img1069782.jpg

http://kuvablogi.com/nayta/prev/img1069780.jpg
and my unimog project
http://kuvablogi.com/nayta/prev/img1069778.jpg

Truck Base : hand made

Body:Bushwanker

ESC:futaba 7 channel

Motor(s):550 series battery driller motor

Servo(s):--

Trans:axial ax 10

Axles:axial ax 10

Tires:2.2 mud slinger

WB:300

Overall Width:--

Diff clearance:--

Center Chassis clearance:--

Overall height:--

Weight:--

http://www.rc-offi.net/smf/index.php?topic=797.45

http://www.rc-offi.net/smf/index.php?topic=668.0

http://www.rc-offi.net/smf/index.php?topic=669.0

http://rosvot.suntuubi.com/

[iwantoffroad]

http://i149.photobucket.com/albums/s58/iwantoffroad/DSC00855.jpg
http://i149.photobucket.com/albums/s58/iwantoffroad/DSC01451-1.jpg
http://i149.photobucket.com/albums/s58/iwantoffroad/DSC01450-1.jpg

[klifdiver]

57848

57849

57852

57853 TOYOTA HIGHLIFT HILUX - WITH MODS MAMBA MAX ESCHPI YOKS ON AXIAL BEADLOCKSCUSTOM TRANSMISSION 1 INCH LIFT - REFER TO 2.2 SCALE FORUM UNDER R-FAB HILUX "thumbsup"5732057321

[Norcal crawler]

I guess ill add mine in here finially. The basic bruiser hybrid, moped esc, tq3 radio system, 645mg, chino mod to leafs, etc...

Build thread with more pics here.. http://www.rccrawler.com/forum/showthread.php?t=78723

http://i128.photobucket.com/albums/p176/Savage_100/FamilyPictures5130.jpg

http://i128.photobucket.com/albums/p176/Savage_100/IMG_2842.jpg

[JBHardwear]

http://i144.photobucket.com/albums/r193/jbhardware/myrides008.jpg
MY HIGH LIFT

http://i144.photobucket.com/albums/r193/jbhardware/005-2.jpg
MY CUSTOM SCALE BUILD IN THE WORKS

http://i144.photobucket.com/albums/r193/jbhardware/myrides004.jpg
MY AXIAL SET UP AS A BRONCO

http://i144.photobucket.com/albums/r193/jbhardware/004.jpg
MY FIRST CRAWLER-BENDER CUSTOMS SW2 TLT

[Frank3]

Not sure where to put these pics. Here seems best .
AX10 / X-trail , a few scale odds and ends .

[Tim_B]

Here's a few pics of my AX-10 Hummer in the works. I'm trying to decide if I want to keep or get rid of the body so I haven't really put all my scale accessories on it yet.

http://i120.photobucket.com/albums/o183/Tim__B/My%20RC%20Crawler/DVC01540.jpg
http://i120.photobucket.com/albums/o183/Tim__B/My%20RC%20Crawler/DVC01539.jpg
http://i120.photobucket.com/albums/o183/Tim__B/My%20RC%20Crawler/DVC01538.jpg

Thanks for looking "thumbsup"

-Tim

[Jankka]

Here´s my 2.2" scale Ford Bronco

Specs:

- MFM- racing scale chassis
- Traxxas E-Maxx Transmission
- Axial Ax10 axles
- Integy MSR-10 shocks with inner springs
- MambaMax ESC
- DY L-size 2700kv brushless motor

http://koti.mbnet.fi/jankka70/kuvat/Crawlerit/30.3.2008%20005.jpg

http://koti.mbnet.fi/jankka70/kuvat/Crawlerit/30.3.2008%20010.jpg





http://koti.mbnet.fi/jankka70/kuvat/Crawlerit/30.3.2008%20014.jpg

[slowdown]

Here are my two 2.2s

[haynesn12]

Specs:
custom chassis
tlt axles
r2 tranny
27t motor(will be 35 turn next week)
hitec esc
jr radio gear
ae stock mgt steering serov for now
losi rocks claws on axial beadlocks
moab on rpm rim for spare
hpi rubi body
around 12 inch wheelbase
will be changin the rings on the wheels and getting some axle upgrades soon as well
http://i36.photobucket.com/albums/e32/haynesn12/HPIM1528.jpg
http://i36.photobucket.com/albums/e32/haynesn12/HPIM1529.jpg
http://i36.photobucket.com/albums/e32/haynesn12/HPIM1530.jpg

[carbonuts]

Truck Base : K2-3S OG

Body: Jeep

ESC: Viper

Motor(s): Varies between 35t lathe and 27t mod motor

Servo(s): Hitec Both steer and winch

Trans: Good old pede

Axles: tlt

Tires: RC4WD Mud Slingers

http://i97.photobucket.com/albums/l219/carbonuts/mudslinger3-1.jpg

http://i97.photobucket.com/albums/l219/carbonuts/scalerjeepatoakes.jpg

http://i97.photobucket.com/albums/l219/carbonuts/scalejump2.jpg

http://i97.photobucket.com/albums/l219/carbonuts/scalejump.jpg

http://i97.photobucket.com/albums/l219/carbonuts/underwater.jpg

[Mav-1981]

AIght here's mine finally finished. I dont know if I will ever put an interior in it or not and too lazy to tear it down to get rid of the green on the links.

Base: AX10
Chassis: X-Trail and self made tube frame for roll bars
Tires: 2.2 Mud Slingers
Body: HPI rubicon with "Rollcage/ Rear cover" cut out for rollbars and TRUE Soft top on wire frame
Motor: 35T Warrior
ESC: Rooster
Battery: Vemon 4600mah 6 cell
Servo: HS5645

http://i275.photobucket.com/albums/jj290/mavric99/Scale%20Project/IMG_0336.jpg
http://i275.photobucket.com/albums/jj290/mavric99/Scale%20Project/IMG_0335.jpg
http://i275.photobucket.com/albums/jj290/mavric99/Scale%20Project/IMG_0326.jpg

[kapp916]

this is my ax10 xtrail with novak crawler system, and some claws.


http://i261.photobucket.com/albums/ii61/kapp916/rubicononclaws.jpg

[NitroStar]

Jeep Rubicon

Truck Base : AX10 base with custom chassis, Internal body mounts, bumper mounts, & braces
Body: HPI Jeep Rubicon
ESC: LRP Sphere (Going to get a cheaper waterproof one later)
Motor(s): Novak Velociti 7.5 brushless
Servo(s): JR Z590M
Trans: Axial Scorpion AX10
Axles: Axial Scorpion AX10
Tires: Axial Rock Lizards
WB: 12.1"
Overall Width: 10.1/4"
Diff clearance: 1 9/16"
Center Chassis clearance: 3 7/16"
Overall height: 9 7/16"
Weight: ?

http://i299.photobucket.com/albums/mm295/NitroStarGT/Rubicon%20pics%20for%20build%20thread/Final%20Pics/5-5-081.jpg

http://i299.photobucket.com/albums/mm295/NitroStarGT/Rubicon%20pics%20for%20build%20thread/Final%20Pics/5-5-083.jpg

http://i299.photobucket.com/albums/mm295/NitroStarGT/Rubicon%20pics%20for%20build%20thread/Final%20Pics/5-5-0813.jpg

http://i299.photobucket.com/albums/mm295/NitroStarGT/Rubicon%20pics%20for%20build%20thread/Final%20Pics/5-5-085.jpg

http://i299.photobucket.com/albums/mm295/NitroStarGT/Rubicon%20pics%20for%20build%20thread/Final%20Pics/5-5-0822.jpg

[shrek]

here is a couple pics of my rebuild.
homemade chassis
tlt axles
axiel rims with moabs
associated shocks
losi trans with integy45 turn
hpi rubicon body

[upnover1]

http://img2.putfile.com/thumb/5/14012122681.jpg (http://www.putfile.com/pic/8172497)

http://img2.putfile.com/thumb/5/14012122776.jpg (http://www.putfile.com/pic/8172499)

[Mongo]

Here's Mongo.

[edward87]

LR3 HARD BODY
R2,DISCONNECT
TLT AXLES
CUSTOM LINKS
2.2 ROCKS RINGS AND RIMS
MUD SLINGERS ,COMING SOON

http://i294.photobucket.com/albums/mm101/edward-turbo87/May23_0001.jpg
http://i294.photobucket.com/albums/mm101/edward-turbo87/May27_0002.jpg
http://i294.photobucket.com/albums/mm101/edward-turbo87/May27_0003.jpg
http://i294.photobucket.com/albums/mm101/edward-turbo87/May23_0003.jpg

[hitman46mod]

The Hotness.

Truck base: 3/16" steel tube

Body: Aluminum panles

ESC: Proboat water proof 50a

Motor: Integy 75t

Servos: JR 8711 steering, tower pro MG995 winch.

Trans: RC4WD R2

Axles: Scorpion AX-10

Tires: RC4WD Rock Crushers 2.2

Wheel Base: 12"

Over all width: 10"

Diff clearance: 1 3/4"

Chassis clearance: 3 1/4"

Over all height: 8 1/4"

Weight 8.5 lbs.

Scale pics. http://www.putfile.com/album/0/hitman38mod

Scale vids. http://media.putfile.com/Scale-trucking001 http://media.putfile.com/Scale-trucking000 http://media.putfile.com/Scale-trucking

Winching http://media.putfile.com/winching000-12 http://media.putfile.com/winching000

[shortlux]

My Midgard Ax10

Midgard comp scale chassi
Ax10 tranny
Ax10 axles
Tekin rebel 2 ESC
Hpi Jeep Wrangler body
Integy 45t motor
Hitec 5645 digital servo
Proline beadlock wheels
Proline Flat Iron
Droop suspension with internal springs

http://i126.photobucket.com/albums/p91/skaarud/IMG_6397.jpg

http://i126.photobucket.com/albums/p91/skaarud/IMG_6396.jpg

http://i126.photobucket.com/albums/p91/skaarud/IMG_6395.jpg

http://i126.photobucket.com/albums/p91/skaarud/IMG_6394.jpg

[tubeman]

Heavy Chevy

Earnhardt Body: Thank Dshelowjr

Axial Trans Vf Dig

Hilift Drive Shafts

Tlt Axles

Homemade Front Bumper

Dont Forget The Dogbox

[slobert]

Truck Base : Homemade Aluminum Chassis

Body: HPI Jeep Rubicon

ESC: Novak Explorer

Motor(s): Kyosho monster fan cooled motor

Servo(s): Frame Mounted Hitec HS 645MG

Trans: Locked Losi XXXT

Axles: Axial AX10

Tires: Proline Flat Irons

Wheels: RPM Revolvers with narrow track spacing

WB: 12.5"

Overall Width: 9.5"

Diff clearance: 1.25"

Center Chassis clearance: 3"

Overall height: 9.75"

Weight: 3-4 Pounds ( not accurate scale )

http://i508.photobucket.com/albums/s328/slobert1970/RC%20jeep%20buildup/18-08-081.jpg



http://i508.photobucket.com/albums/s328/slobert1970/RC%20jeep%20buildup/18-08-084.jpg



http://i508.photobucket.com/albums/s328/slobert1970/RC%20jeep%20buildup/18-08-086.jpg



link to my build thread
http://www.rccrawler.com/forum/showthread.php?t=129656

[pook]

F350 killer frame
R2HD
Mag motor

[toytech]

RC4WD Trail Finder kit
Toyota Hilux W/Canback
Novak (Rooster Crawler)
KAWADA 50T W/4:1 reduction unit
JR DS8711 steering and JR Z590M shifting
R2 trans.
Yota scaled axles W/U-bolt kit
Yokohama geolander M/T
wheel base is 11.5 in.
width is 9 in.
diff clearance is 1.25 in.
trans. clearance is 2.5 in.
9 in. high
weight is aprox. 8lbs.
76473

76474

76475

76483

76484

76485

[bahzul]

heres mines just completed,

Truck Base : AX10 base with custom chassis, body mounts, bumper,
Body: F-650
ESC: AX10
Motor(s): Stock AX10, Soon to be Integy V10 Professional 55-T
Servo(s): Futaba S3003
Trans: AX10
Axles: AX10
Tires: Losi rock claws (blue)
WB: 13.4"
Overall Width: 10.1/4"
Center Chassis clearance: 3"
Overall height: 9 1/4"
Weight: ?


http://i439.photobucket.com/albums/qq119/Bahzul/IMG_1187-1.jpg

http://i439.photobucket.com/albums/qq119/Bahzul/IMG_1226.jpg

http://i439.photobucket.com/albums/qq119/Bahzul/IMG_1191.jpg

http://i439.photobucket.com/albums/qq119/Bahzul/IMG_1198.jpg

[awayo]

wheely king
esc: novak rooster
motor:integy 85t
piñon:12
spur:96t
moabs
body chevrolet blazer k5 1980`
winch front


http://img126.imageshack.us/img126/4197/cepillo002hv3.jpg (http://imageshack.us)

http://img126.imageshack.us/img126/3475/cepillo003vm2.jpg (http://imageshack.us)


http://img128.imageshack.us/img128/7103/cepillo004an0.jpg (http://imageshack.us)

http://img403.imageshack.us/img403/8807/cepillo012oh5.jpg (http://imageshack.us)

http://img231.imageshack.us/img231/7944/cepillo015na9.jpg (http://imageshack.us)

http://img231.imageshack.us/img231/1185/cepillo005be2.jpg (http://imageshack.us)

one more the ultimate accesories front bumper home made

http://img115.imageshack.us/img115/1846/winchbumper005yx9.jpg (http://imageshack.us)

[MonsterAnt]

Here is my new JK build I built it after one of the rubicon express jeeps. I machined ever thing under the body from front to back.

custom chassis
moab tires
35t motor
novak crawler ESC
axial tranny
TLT axils

http://i104.photobucket.com/albums/m176/gnccracer3/jeepjk042-Copy3.jpg?t=1224115050

http://i104.photobucket.com/albums/m176/gnccracer3/jeepjk041-Copy3.jpg?t=1224115126

http://i104.photobucket.com/albums/m176/gnccracer3/jeepjk042-Copy4.jpg?t=1224115119

http://i104.photobucket.com/albums/m176/gnccracer3/jeepjk043-Copy4.jpg?t=1224115110

http://i104.photobucket.com/albums/m176/gnccracer3/jeepjk044-Copy2.jpg?t=1224115105

http://i104.photobucket.com/albums/m176/gnccracer3/jeepjk045-Copy2.jpg?t=1224115097

http://i104.photobucket.com/albums/m176/gnccracer3/jeepjk046-Copy2.jpg?t=1224115082

[iwantoffroad]

http://i149.photobucket.com/albums/s58/iwantoffroad/DSC02628.jpg

[Merlinito]

Here is my modified hand made AX-10 Jeep Wrangler :)
http://i433.photobucket.com/albums/qq56/Merlinito/P1000026.jpg
http://i433.photobucket.com/albums/qq56/Merlinito/270920081548.jpg


http://i433.photobucket.com/albums/qq56/Merlinito/270920081545.jpghttp://i433.photobucket.com/albums/qq56/Merlinito/270920081553.jpghttp://i433.photobucket.com/albums/qq56/Merlinito/270920081566.jpghttp://i433.photobucket.com/albums/qq56/Merlinito/270920081568.jpghttp://i433.photobucket.com/albums/qq56/Merlinito/270920081549.jpg
http://i433.photobucket.com/albums/qq56/Merlinito/P1000206.jpghttp://i433.photobucket.com/albums/qq56/Merlinito/291020081740.jpghttp://i433.photobucket.com/albums/qq56/Merlinito/301020081755.jpghttp://i433.photobucket.com/albums/qq56/Merlinito/301020081758.jpg


Three Diferent upgrades :D

[bvek]

Truck Base : MFM

Body: HPI PORSCHE

ESC: DURATRAX 12T

Motor:MONSTER MAYHEM ??

Servo: HITEC HS-525MG

Trans: PEDE

Axles: TLT

Tires: HPI YOKOHAMA

WB: 10. 1/4"

[zman280]

Guess i'll toss my bucket in here.........


Axail AX10
TCS X-Trail
Quark 33
980kv outrunner
futaba T3PDF
HS965MG
HPI Rubicon
lights, lights, and lights
home made scale accessories
lots of other stuff.......

http://i100.photobucket.com/albums/m8/z-man280/tri%20city%20crawlers/SANY1324Large.jpg
http://i100.photobucket.com/albums/m8/z-man280/tri%20city%20crawlers/SANY1319Large.jpg
http://i100.photobucket.com/albums/m8/z-man280/tri%20city%20crawlers/SANY1359Large.jpg
http://i100.photobucket.com/albums/m8/z-man280/tri%20city%20crawlers/SANY1355Large.jpg

[caymin last]

Still a work in progress, but complete and running well. With a small budget I managed to turn a stock WK into a fun scale basher of sorts.
Here's what I got.
Wk base:
modified stock body:
stock electronics:
Venom Fireball 50T motor:
Clocked stock trans:
WK axles W/maximizer lockers:
2.2 Geolander tires W/cut foams:
Narrowed traxxas rims 1.5" :
12" wheelbase:
lots of hand made scale accessories and a roofrack, also made fenders with D rings and a tow ball on back:
http://i478.photobucket.com/albums/rr145/cayminlast/DSCN6268.jpg
http://i478.photobucket.com/albums/rr145/cayminlast/DSCN6267.jpghttp://i478.photobucket.com/albums/rr145/cayminlast/DSCN6259.jpg

[washracer_11]

My 2.2

http://i150.photobucket.com/albums/s82/washracer_11/Crawlers004.jpg

[caddyshack]

Truck Base : X-trail

Body: proline f-100

ESC: novak roster crawler

Motor(s):gm hand wound 50 t

Servo(s): hitec hs-645mg

Trans: axial

Axles: axial

Tires: proline hammers

WB:11.5

Center Chassis clearance:4.8

http://i242.photobucket.com/albums/ff45/caddyshack_01/DSC08487.jpg

http://i242.photobucket.com/albums/ff45/caddyshack_01/DSC08488.jpg

http://i242.photobucket.com/albums/ff45/caddyshack_01/DSC08489.jpg

http://i242.photobucket.com/albums/ff45/caddyshack_01/DSC08491.jpg

http://i242.photobucket.com/albums/ff45/caddyshack_01/DSC08492.jpg

[lnc0321]

Here is mine. Yeap, another Jeep Rubicon"thumbsup"
Stock Scorpion RTR with Spektrum servo...
http://i148.photobucket.com/albums/s27/lnc0321/HPIM1409.jpg
http://i148.photobucket.com/albums/s27/lnc0321/HPIM1413.jpg

[jonA]

TLT Tuber landcruiser

Build thread:
http://www.rccrawler.com/forum/showthread.php?t=26095

Specs:
TLT axles with tobee wideners (painted flat black)
Yoko geolanders, pede wheels, with rck 3rd gen rock rings
pede tranny mounted under the hood, with a transfer case in the middle of the chassis.
55t lathe
Super rooster
Hitec 945MG
Integy shocks, losi springs (30wt oil)
11.5" wheelbase
Partial interior with recaro seats
rig looks good, did a good job on it "thumbsup"

[phase10]

http://i268.photobucket.com/albums/jj40/stukeith/bronco.jpg
http://i268.photobucket.com/albums/jj40/stukeith/broncospinnin.jpg

"thumbsup"

http://i268.photobucket.com/albums/jj40/stukeith/1216081438.jpg
http://i268.photobucket.com/albums/jj40/stukeith/1216081450b.jpg
http://i268.photobucket.com/albums/jj40/stukeith/1216081554b.jpg

[Trav's AX10]

Truck Base : Axial ax-10 t6 scale chassis droom CKRC
Body: HPI Rubicon
ESC: Axial
Motor(s): Novak 55t
Servo(s): hitec hs-635mg
Trans: axial
Axles: axial
Tires: pro-line hammers
WB: 12.5"
Overall Width: ermm about 6"
Diff clearance: umm umm 1"
Center Chassis clearance: 3"
Overall height: 7"
Weight: i don now

http://photos-c.ll.facebook.com/photos-ll-snc1/v1380/224/42/619852673/n619852673_2330178_6456.jpg (http://www.facebook.com/photo.php?pid=2330179&id=619852673)
http://photos-b.ll.facebook.com/photos-ll-snc1/v1380/224/42/619852673/n619852673_2330177_5856.jpg (http://www.facebook.com/photo.php?pid=2330179&id=619852673)
http://photos-d.ll.facebook.com/photos-ll-snc1/v1380/224/42/619852673/n619852673_2330179_7162.jpg (http://www.facebook.com/photo.php?pid=2330179&id=619852673)
"thumbsup""thumbsup""thumbsup""thumbsup""thumbsup""thumbsup""thumbsup""thumbsup""thumbsup""thumbsup""thumbsup""thumbsup""thumbsup""thumbsup""thumbsup""thumbsup""thumbsup""thumbsup""thumbsup""thumbsup"
DONT WORRY GUYS REMEBER ITS A JEEP THING....THEY WOULDED UNDRSTAND
ANY WAYS...........;-)

[stephen52068]

http://img380.imageshack.us/img380/5439/dsc01666jf9.jpg


http://img201.imageshack.us/img201/5707/dsc01646cs2.jpg


http://img380.imageshack.us/img380/7180/apf2320080802102733917fl7.jpg

http://img392.imageshack.us/img392/9382/dsc01727cm4ud6.jpg

[RPMJ]

My Courier

[rugerboy]

http://i217.photobucket.com/albums/cc276/rugerboy/wk2008.jpg
http://i217.photobucket.com/albums/cc276/rugerboy/wk2006.jpg
http://i217.photobucket.com/albums/cc276/rugerboy/wk2005.jpg
http://i217.photobucket.com/albums/cc276/rugerboy/wk2004.jpg
http://i217.photobucket.com/albums/cc276/rugerboy/wk2002.jpg
http://i217.photobucket.com/albums/cc276/rugerboy/wk2001.jpg

[IRON MAN]

Truck Base : AX10

Body: Sector 7 H2

ESC: Novak Rooster

Motor(s): Novak Fifty-Five

Servo(s): HiTec HS-645MG

Trans: AX10

Axles: AX10

Tires: Axial Rock Lizards

WB: 12 Inches

Overall Width: 10 Inches

Diff clearance: 1 1/4 Inches

Center Chassis clearance: 4 Inches

Overall height: 11 Inches

Weight: Not Sure

http://photos-e.ak.fbcdn.net/photos-ak-snc1/v1923/127/109/502880210/n502880210_2359220_7934.jpg

[joe16]

******Modifly By Joe16 Thailand********
Truck Base : Hand made half chassis alu with DIY tube
Body: CR-01
ESC:Mtronix
Motor(s):standard Tamiya
Servo(s):MG995
Trans:Hilux 3gears
Axles:CR-01
Tires:Mudslinger
WB:11"
Overall Width:9.5
Diff clearance:1-3/8
Center Chassis clearance: 3.75"
Overall height: 9.5" to the top of tube
Weight: I'm not sure
http://i421.photobucket.com/albums/pp300/ajjcs25/FjProjet/SANY0330.jpg
http://i421.photobucket.com/albums/pp300/ajjcs25/FjProjet/SANY0322.jpg


http://i421.photobucket.com/albums/pp300/ajjcs25/FjProjet/SANY0327.jpg

[backtrailzracer]

Truck Base :custom 1/8 alu. scaler

Body:pl 1980 blazer

ESC:lrp ai runner

Motor(s):integy 65t

Servo(s):J R z650m steering and traxxas modded for winch

Trans:pede

Axles:tlt

Tires:moab m2

WB:11 3/4

Overall Width:10

Center Chassis clearance:3in

http://i531.photobucket.com/albums/dd354/s15kills240/tlt-4.jpg

http://i531.photobucket.com/albums/dd354/s15kills240/tlt-2.jpg

http://i531.photobucket.com/albums/dd354/s15kills240/tlt-5.jpg

http://i531.photobucket.com/albums/dd354/s15kills240/tlt-6.jpg

[Mandio]

Truck Base : TCS X-Trail

Body: HPI Bronco

ESC: Tekin Fx-R

Motor(s): Tamiya Rs 540 Standard

Tranny: RC4WD R2 2 speed

Reducer: RC4WD 4:1

Servo(s): TowerPro MG995

Axles: TLT (block)

Tires: ProLine Flat Iron

Weight: 5 Kg +/-


http://i413.photobucket.com/albums/pp212/mandiopitty/PITTYLUX/ROCCHEBIANCHE10082008070.jpg

http://i413.photobucket.com/albums/pp212/mandiopitty/RoccheBianche271208/ROCCHEBIANCHE27122008004.jpg

http://i413.photobucket.com/albums/pp212/mandiopitty/PITTYLUX/PITTYLUX24122008005.jpg

http://i413.photobucket.com/albums/pp212/mandiopitty/PITTYLUX/PITTYLUX24122008021.jpg

http://i413.photobucket.com/albums/pp212/mandiopitty/PITTYLUX/PITTYLUX24122008029.jpg

http://www.youtube.com/watch?v=ooickpup_lY&feature=channel_page

[himo]

Highlift Chassis ＆axles
BullHead body
waterproofed
esc: Sidwinder Motor: RCer WARP 4
redio: DX6i AR6100
RC4WD Rockstar 2.2 Black Narrow
IMEX 2.2 SKULL N BONES
MG995 Winch

http://i37.tinypic.com/2q2etmf.jpg

http://i34.tinypic.com/1621tls.jpg

http://i36.tinypic.com/34s0wgh.jpg

http://i34.tinypic.com/dls56g.jpg

http://i33.tinypic.com/206g32d.jpg

http://i35.tinypic.com/2woaout.jpg

[rugerboy]

http://i217.photobucket.com/albums/cc276/rugerboy/crawlers009.jpg
http://i217.photobucket.com/albums/cc276/rugerboy/crawlers010.jpg
http://i217.photobucket.com/albums/cc276/rugerboy/crawlers007.jpg
http://i217.photobucket.com/albums/cc276/rugerboy/crawlers005.jpg
http://i217.photobucket.com/albums/cc276/rugerboy/crawlers002.jpg
http://i217.photobucket.com/albums/cc276/rugerboy/crawlers003.jpg

[RydeFab]

here's mine...........redid my "little brusier" with a dovetailed front cab and new beadlocks with flat irons....................

http://i158.photobucket.com/albums/t93/rnstechracing/DSC01662.jpg

http://i158.photobucket.com/albums/t93/rnstechracing/DSC01676.jpg

[DORK VADER]

Semi scale...



http://i250.photobucket.com/albums/gg251/tacochaser/IMG_1432.jpg
http://i250.photobucket.com/albums/gg251/tacochaser/IMG_1404.jpg
http://i250.photobucket.com/albums/gg251/tacochaser/IMG_1424.jpg

[SCORPIAN670]

here is a pic of my toyota. scorpion axles, k3s chassis, scorpion tranny, custom length links, imex swamp dogs, straight axle rear lock outs, wheel wideners, custom tube work and currently fabbin a front bumper and bruiser front cab

http://i27.photobucket.com/albums/c200/BIGGERRED/DSCN5547.jpg

http://i27.photobucket.com/albums/c200/BIGGERRED/DSCN5543.jpg

http://i27.photobucket.com/albums/c200/BIGGERRED/DSCN5550.jpg

http://i27.photobucket.com/albums/c200/BIGGERRED/DSCN5549.jpg

big up

[iggnash]

HERE IS A PIC OF THE SCALER IM IN THE PROCESS OF BUILDING OUT OF MY CRAWLER, LET ME KNOW WHAT U THINK


http://i666.photobucket.com/albums/vv27/iggnash/0125091332.jpghttp://i666.photobucket.com/albums/vv27/ig

[jreckner]

AX-10 RTR
TCS x-trail chassis
LRP A1 esc
trinity 27t
proline flat irons
hpi savage bumpers
hpi Land Rover Defender
some scale goodies
working on interior
http://i406.photobucket.com/albums/pp141/jreckner/P1180183.jpg

http://i406.photobucket.com/albums/pp141/jreckner/P1180180.jpg

http://i406.photobucket.com/albums/pp141/jreckner/P1180179.jpg

[John Crosthwait]

91020

91021

91022

[iggnash]

HERES MORE PICS

http://i666.photobucket.com/albums/vv27/iggnash/0209091020.jpg
http://i666.photobucket.com/albums/vv27/iggnash/0209091018.jpg

[HotRodJosh]

AX-10 base (axles, trans, shocks, most links & hardware)
CKRC T-6 chassis
Novak Rooster Crawler
Integy 55T
Hitec 645MG
RC4WD Mudslingers (cut lugs on front) on Proline 8 Shooters
Homebuilt bumpers
Endless lights
More to come as far as scale stuff too!

And yes....I plan on wheelin' the heck outta of it....."thumbsup"

http://img.photobucket.com/albums/v310/sinistercustom/RC%20cars/IMG_0366.jpg

http://img.photobucket.com/albums/v310/sinistercustom/RC%20cars/IMG_0368.jpg

http://img.photobucket.com/albums/v310/sinistercustom/RC%20cars/DSCF0377.jpg

[Vtown Crawl]

Truck: CR-01, Axial
SC: Goat, Tekin FX-R
Motor: Brushless, 55T Tekin motor
Radio: DX3R
Servo: JR/Hobbico
Tires: Proline Hammers or Losi Rock Claw (Axial)
Shocks: Losi 4" Crawler Shocks
Bodies: HPI, Proline and tamiya
All-around Droop Set-up

http://i533.photobucket.com/albums/ee333/rltobias707/Crawler%20Pics/DSC00400.jpg

http://i533.photobucket.com/albums/ee333/rltobias707/Crawler%20Pics/DSC00399.jpg

http://i533.photobucket.com/albums/ee333/rltobias707/Crawler%20Pics/IMGP5495-1.jpg

http://i533.photobucket.com/albums/ee333/rltobias707/Crawler%20Pics/DSC00435.jpg

http://i533.photobucket.com/albums/ee333/rltobias707/Crawler%20Pics/IMGP5498.jpg

http://i533.photobucket.com/albums/ee333/rltobias707/Crawler%20Pics/IMGP5499.jpg

http://i533.photobucket.com/albums/ee333/rltobias707/Crawler%20Pics/IMGP5506-1.jpg

http://i533.photobucket.com/albums/ee333/rltobias707/Crawler%20Pics/IMGP5505.jpg

http://i533.photobucket.com/albums/ee333/rltobias707/Crawler%20Pics/IMGP5500-1.jpg

http://i533.photobucket.com/albums/ee333/rltobias707/Crawler%20Pics/IMGP5501.jpg

http://i533.photobucket.com/albums/ee333/rltobias707/Crawler%20Pics/IMGP5502.jpg

[Pucca]

http://fine.ap.teacup.com/pucca/img/1231511145.jpg

http://fine.ap.teacup.com/pucca/img/1234672978.jpg

http://fine.ap.teacup.com/pucca/img/1231511513.jpg

http://fine.ap.teacup.com/pucca/img/1234674272.jpg

[solomon7]

X-trail chassis
HPI Rubicon w/styrene diamond plate rockers and crusher corners
Axial tranny 15/84
55T motor
3S Lipo:mrgreen:
Axial axles
Hitec 985mg steering, 645mg winch
Proline m2 hammers on 8 shooter wheels
12" WB Trackwidth: 9.75" GC: 3.05" Height: 9.9" 7lbs 12.5 oz
http://i297.photobucket.com/albums/mm233/Solomonphotos/SprinParktrailride2-09003-1.jpg
http://i297.photobucket.com/albums/mm233/Solomonphotos/scalebuildspringparktrailride052-1.jpg

http://i297.photobucket.com/albums/mm233/Solomonphotos/PB040698-1.jpg
http://i297.photobucket.com/albums/mm233/Solomonphotos/scalebuildspringparktrailride054-1.jpg

[John Crosthwait]

92826

92827

[John Crosthwait]

92945

[jcrawl]

http://i259.photobucket.com/albums/hh300/jballn/DSC01962-1.jpg

http://i259.photobucket.com/albums/hh300/jballn/DSC01910.jpg

http://i259.photobucket.com/albums/hh300/jballn/DSC01991-2.jpg

[4wd4ws]

Chassis:Stainless,fully welded.
Body:HPI Bronco.
ESC:Robbe.
Motor:55t Integy
Servo:Protech.
Transmission:Traxxas.
Axles:TLT-1.
Tires:Mudslingers.
WB:11 1/4 inch,285mm.
Overall width:245mm.
Trackwidth fr/r:195mm,185mm.
Overall length:520mm.
Overall height:220mm.
Diff. clearance:38mm.
Center chassis clearance:70mm.
Weight(rtr):3.2kg.

93703

93706

93945

93946

http://www.rccrawler.com/forum/attachment.php?attachmentid=97826&d=1239524221

http://www.rccrawler.com/forum/attachment.php?attachmentid=97827&d=1239524312

http://www.tamiyagekken.nl/gallery2/main.php?g2_view=core.DownloadItem&g2_itemId=8740&g2_serialNumber=3

http://www.rccrawler.com/forum/attachment.php?attachmentid=109900&d=1252097508

Buildthread:http://www.rccrawler.com/forum/showthread.php?t=98670

[RUTH]

http://i156.photobucket.com/albums/t20/TOYOTARACER10/P3030215.jpg

http://i156.photobucket.com/albums/t20/TOYOTARACER10/P3030212.jpg

http://i156.photobucket.com/albums/t20/TOYOTARACER10/P3030202.jpg

[m&mkrawler]

*** These are pics of chino63 awesome looking scale semi rig... Pics are @ the NBRCC comp at G-Tech 3-8-09...
http://i301.photobucket.com/albums/nn69/maximumkrawler/G-TECHA3.jpg?t=1236777344

[Vtown Crawl]

FXR SP
55 turn motor
Tamiya "Cut" FJ40
Tube Fab by "Uncle Bien" from Fairfield, Ca
Losi Rock Claws
HR Rims with lots and lots of weight
Traxxas3 Radio Modified for dig
DNA Dig
JR Servo
BEC
Servo Limiter
Droop Set-up (Fronts Only)
Stock shocks (80wt oil)

http://i533.photobucket.com/albums/ee333/rltobias707/Crawler%20Pics/DSC04901.jpg

http://i533.photobucket.com/albums/ee333/rltobias707/Crawler%20Pics/DSC04900.jpg

http://i533.photobucket.com/albums/ee333/rltobias707/Crawler%20Pics/DSC04898.jpg

http://i533.photobucket.com/albums/ee333/rltobias707/Crawler%20Pics/DSC04897.jpg

http://i533.photobucket.com/albums/ee333/rltobias707/Crawler%20Pics/DSC04893.jpg

[robbio4422]

i jacked this pic from a club member after yesterdays comp... sorry i had to post it
http://i389.photobucket.com/albums/oo340/kalanisdad/crawlercomp056.jpg

[v6tdi1969]

Hola,excuse for my inglish.My crawler from spain....
http://img19.imageshack.us/img19/3568/unimogu300047.jpg (http://img19.imageshack.us/my.php?image=unimogu300047.jpg)

http://img27.imageshack.us/img27/6271/unimogu300006.jpg (http://img27.imageshack.us/my.php?image=unimogu300006.jpg)

http://img12.imageshack.us/img12/9742/unimogu300048.jpg (http://img12.imageshack.us/my.php?image=unimogu300048.jpg)

http://img24.imageshack.us/img24/6387/unimogu300061x.jpg (http://img24.imageshack.us/my.php?image=unimogu300061x.jpg)

http://img24.imageshack.us/img24/2858/unimogu300057.jpg (http://img24.imageshack.us/my.php?image=unimogu300057.jpg)

http://img25.imageshack.us/img25/443/unimogu300082j.jpg (http://img25.imageshack.us/my.php?image=unimogu300082j.jpg)

http://img13.imageshack.us/img13/5091/unimogu300084.jpg (http://img13.imageshack.us/my.php?image=unimogu300084.jpg)

http://img18.imageshack.us/img18/844/unimogu300107.jpg (http://img18.imageshack.us/my.php?image=unimogu300107.jpg)

[cj5_jeep]

http://i28.photobucket.com/albums/c241/cj5_jeep/untitled-3.jpg

http://i28.photobucket.com/albums/c241/cj5_jeep/untitled-2.jpg

http://i28.photobucket.com/albums/c241/cj5_jeep/DSC_0337.jpg

[Lou Barzie]

http://i660.photobucket.com/albums/uu330/loubarzie/Foto16.jpghttp://i660.photobucket.com/albums/uu330/loubarzie/Foto17.jpghttp://i660.photobucket.com/albums/uu330/loubarzie/Foto15.jpg

[FeilEOD]

Well here is my first scaler and crawler. This build is based on the new Proline Tuber with my own creative touches. For more info check the full build post "thumbsup"

http://i492.photobucket.com/albums/rr286/feileod/RC%20Crawler/IMGP1567.jpg

http://i492.photobucket.com/albums/rr286/feileod/RC%20Crawler/IMGP1562.jpg

http://i492.photobucket.com/albums/rr286/feileod/RC%20Crawler/IMGP1564.jpg

http://i492.photobucket.com/albums/rr286/feileod/RC%20Crawler/IMGP1565.jpg

[Eticket]

Heres my scaler - The fun has just begun
X-trail Chassis
Axial running gear
Misc stuff

http://i50.photobucket.com/albums/f347/eticketxb/RCtruck001.jpg
http://i50.photobucket.com/albums/f347/eticketxb/RCtruck002.jpg
http://i50.photobucket.com/albums/f347/eticketxb/RCtruck003.jpg
http://i50.photobucket.com/albums/f347/eticketxb/RCtruck004.jpg

[upslp]

http://i660.photobucket.com/albums/uu327/upslp/rc%20crawlers/jeepinthewater.jpg
http://i660.photobucket.com/albums/uu327/upslp/rc%20crawlers/jayandIcrawling.jpg
http://i660.photobucket.com/albums/uu327/upslp/rc%20crawlers/myjeepontherocks.jpg
http://i660.photobucket.com/albums/uu327/upslp/rcjeep.jpg
http://i660.photobucket.com/albums/uu327/upslp/rcjeep2.jpg

Here are a couple of pics of my scale jeep and a buddy's axial. The jeep has 65t integy, rooster crawler, 2.2 Moabs, home made chassis and leaf springs, and a whole bunch of proline accesories!

[m&mkrawler]

FINALLY on board with a SCALER..."thumbsup"
Let the TRAIL-RIDES begin...
http://www.rccrawler.com/forum/picture.php?albumid=428&pictureid=2917

[m&mkrawler]

http://www.rccrawler.com/forum/picture.php?albumid=428&pictureid=2916

[DiabloCrawler]

One of my Defenders ...8)... from Portugal. "thumbsup"

http://img188.imageshack.us/img188/5462/dsc00454q.jpg (http://img188.imageshack.us/my.php?image=dsc00454q.jpg)

http://img265.imageshack.us/img265/2705/dsc00461i.jpg (http://img265.imageshack.us/my.php?image=dsc00461i.jpg)

http://img193.imageshack.us/img193/291/dsc00468cos.jpg (http://img193.imageshack.us/my.php?image=dsc00468cos.jpg)

http://img520.imageshack.us/img520/4959/dsc00475z.jpg (http://img520.imageshack.us/my.php?image=dsc00475z.jpg)

http://img297.imageshack.us/img297/9391/dsc00502v.jpg (http://img297.imageshack.us/my.php?image=dsc00502v.jpg)

http://img189.imageshack.us/img189/7526/dsc00507q.jpg (http://img189.imageshack.us/my.php?image=dsc00507q.jpg)

http://img220.imageshack.us/img220/3822/dsc00509k.jpg (http://img220.imageshack.us/my.php?image=dsc00509k.jpg)

[MEDiC]

Tamiya Toyota Tundra
3 Speed Transmission
Corefire Waterproof ESC and Brushless Motor
RC4WD 100mm Spark Shocks
JunFac Steering and 4 Link Kit
XP 1015 Digital Servos
RC4WD 2.2 Mud-Slingers
RPP Limited Edition Black Alum Rims
Fender Flare and Snorkel Kit
Rubber Ball Bearing Kit
Airtronics Digital RDS 8000 RC/TX


http://i490.photobucket.com/albums/rr265/MEDiC2008_Photo/DSC01114.jpg

http://i490.photobucket.com/albums/rr265/MEDiC2008_Photo/DSC01038.jpg

http://i490.photobucket.com/albums/rr265/MEDiC2008_Photo/DSC00947.jpg

[mbmlcrawlers]

Custom Jeep Tuber!"thumbsup"

[spicer3]

here is my rig nothing super about it...
x-trail
traxxas shocks
55t motor
pro line roof rack/ lights
rc4wd mud slingers
soon to be a hpi savage bumper on the front...


this was how it sarted

http://i233.photobucket.com/albums/ee219/spicer36/Copyof3.jpg

bout half way to where it is at know


http://i233.photobucket.com/albums/ee219/spicer36/axial32.jpg

all the work was worth it"thumbsup"
http://i233.photobucket.com/albums/ee219/spicer36/3-1.jpg
http://i233.photobucket.com/albums/ee219/spicer36/untitled.jpg

[rcstealth]

Nao/Dave pack built F350 Truggy

http://img.photobucket.com/albums/v73/ihaveabruiser/Bryans%20house%20Dec%201/Bryanshousedec1033.jpg
http://img.photobucket.com/albums/v73/ihaveabruiser/Bryans%20house%20Dec%201/Bryanshousedec1030.jpg
that is so cool very nice ride

[John Crosthwait]

this is my ram charger:mrgreen:105380

105381

105382

105383

105384

[John Crosthwait]

105385

[JunkMaker]

Body :[Aoshima]FJ40 Hard body
chassis :[TAMIYA]BRUISER chassis
Ｔｒａｎｓｍｉｓｓｉｏｎ:[TAMIYA]3Speed Transmission &[RC4WD]T1 Transfer case
Tire :[RC4WD]Rok Rox
http://farm4.static.flickr.com/3557/3678737024_b0d93a6c61_o.jpghttp://farm3.static.flickr.com/2514/3677922345_036e556258_b.jpg

[xstreets10]

http://www.rccrawler.com/forum/picture.php?albumid=544&pictureid=3998
figured I would post a pic before I sell it, xtrail with aluminum trans case and custom bumpers and rock sliders

[ss454]

Scx10
d40 axles
hpi front and rear bumpers
clodbuster light bar
proline body
38mm brake rotors
55 turn motor
rc4wd wheels105641

[ss454]

scx 10 frame

[ss454]

just another view

[ss454]

strc frame
axial axles
wheelie king trans
proline body
imex tires
hpi wheels

[skitzofrenic]

Here is the Landy
http://photos-h.ak.fbcdn.net/hphotos-ak-snc1/hs130.snc1/5572_124002116487_614971487_3413311_3555943_n.jpg
http://photos-a.ak.fbcdn.net/hphotos-ak-snc1/hs130.snc1/5572_124002121487_614971487_3413312_1225699_n.jpg
http://photos-b.ak.fbcdn.net/hphotos-ak-snc1/hs130.snc1/5572_124002126487_614971487_3413313_7888609_n.jpg
http://photos-c.ak.fbcdn.net/hphotos-ak-snc1/hs150.snc1/5572_124002131487_614971487_3413314_7770813_n.jpg

[Mr. Ed]

Xtail chassis
Novak Rooster
novak 55 turn
Flat Irons
Custom made TJ8 Body

[poor247]

http://i299.photobucket.com/albums/mm281/poor247/Picture105.jpg

http://i299.photobucket.com/albums/mm281/poor247/Picture113.jpg

[fernando]

http://i71.photobucket.com/albums/i148/warpig56/CIMG4932.jpg
THIS TRUCK BELONGS TO A GUY NAME WARPIG, BUT IT WAS SO COOL i HAD TO PUT IT UP."thumbsup"

[eFly]

Hello,
My Yota :mrgreen:


http://img263.imageshack.us/img263/2815/img46673014483.jpg

http://img515.imageshack.us/img515/9326/img46683020759.jpg

http://img161.imageshack.us/img161/2894/img46693027596.jpg

http://img204.imageshack.us/img204/3896/img46703035645.jpg

vid: http://www.youtube.com/watch?v=w8yuGnqqEsc

Enjoy "thumbsup"

[twissted]

:twisted:http://i628.photobucket.com/albums/uu2/Jack59/newshoes002.jpg
http://i628.photobucket.com/albums/uu2/Jack59/newshoes003.jpg
http://i628.photobucket.com/albums/uu2/Jack59/newshoes004-1.jpg

[buggy]

http://i698.photobucket.com/albums/vv350/gabeoffroad/29-1.jpgall i have is a old cell pic, i have since beat the hell outta this body.