Overspray

[hexlink]

So I was painting my body and some of my masking wasn't so good and a little paint bled under and a little bit of overspray got in there. Is there anything that will take it off and not hurt the lexan?

[rockwerks]

So I was painting my body and some of my masking wasn't so good and a little paint bled under and a little bit of overspray got in there. Is there anything that will take it off and not hurt the lexan?

you can scrape very carefully. or use brake fliud on a q tip.....be very carefull though

[6x6bigdollars]

Hi they make this Stuff called Body Wash,it works reel good,I bought my body wash from BoLink when they were selling it,I think Tower Hobby Sell it,Look in the Body section,I will look around for you to see If I can fine anyone else.Jim

[Grizzly4x4]

I use "Goof Off" or "Oops" from the local hardware store.

[Bronco]

get some sandpaper and sand it smooth and then repaint it

[slobin3d]

I use rubbing alchohalon a Q tip is the paint is fresh, if not then goo gone works pretty well again with a Q tip.

[jason]

Nitro fuel is what I always use ;)

[Cloak]

if it is really really small, I use an xacto knofe and scrape the little bits off.