Ckrc King Build

[KING BLING]

Its Almost Finished. I Just Pulled Out My 55t For The New Set Up, Cant Wait To Test It.

Wheely King Axles
Moad 2.2/ Star Cut Foams
Hpi 5 Spokes
Pede Bearing Trans
Pede Drivelines
Custom Rear Driveline Disconnect (not Yet Tested)
3/16" Brakeline Tubing Fury Chassis
Hs645mg Servo
Integy 5a Bec Unit
Mamba 25 Esc
Holmes Hobbies Revolver
12.5" Wheelbase
11 5/8" Wide
Axle Battery Mount
8 Cell 1500 Pack From The Crawler Store.

[666]

That looks trick!:shock: I like your steering idea. Did u make the chassis?

[KING BLING]

I Really Like The Axles. It Seems Like They May Be The Hot Ticket For 07'.
The Buggy Is Sopposed To Like Like My 1/1 Comp Buggy, Here.

[tmaxxking1]

nice rigs

the wheely king axles look real beefy "thumbsup"

[SnailMail]

knew it wouldn't be long before these build started showing up

[k9popo]

nice work they both look saweet"thumbsup"

[yamaharider308a]

wow, thats an amazing rig!

[BENDER]

Nice work, that chassis is clean!! "thumbsup"

[dezfan]

Sweet, I plan to build a WK axled rig at some point this year."thumbsup"

How does it perform w/ only droop travel? Very interested in the concept.

[KING BLING]

Thanks Guys. The Suspension Works Great. I Kind of Use This On The 1/1 Rigs I Build. The Rig Does Not Want To Unload Going Verticle Or On Side Hills. There Are No Springs Pushing All The Time Trying To Roll It.

In 1/1 Comp Rigs, Everyone Went To Air Shocks Because They Dont Unload Like Coil Overs Do. Same Thing Here, When I Go Vert And Turn It Also Doesnt Unload And Lift A Tire. I Think I Need Some More Driving Time, But So Far It Works Great.

[Unholy]

Any bumpsteer with that steering setup?

Nice rigs, by the way. Both 1:1 and R/C! "thumbsup"

[KING BLING]

Any bumpsteer with that steering setup?

Nice rigs, by the way. Both 1:1 and R/C! "thumbsup"I HAVENT NOTICED ANY, BUT THE STEERING DOES PULL A LITTLE WHEN THE DRIVERS SIDE IS FULLY DROOPED OUT.

[microgoat]

Both of those rigs look mean as hell. Looks like I'll have to try a Wheelie King, if they ever come off backorder "thumbsup"

[racerx]

The LHS has two in stock!;-) As soon as I land a new job I might check em out. Maybe by that time the parts will be available so I won't have to buy two of them.:shock:



Oh yeah, Nice buggy(s) KB!

[gstealer]

That is fantastic! Great looking rig.

I've had me WK for a couple of weeks and thats what I'd like to do to mine too. Any comments on the chassis? Did you build it or buy it?

I'd liek to try making my own tube chassis, but I have no idea where to start the build.

[derrick1032]

both rigs look well built

[Del Monte]

nice rig jake! I thought you sold the 1:1?

[Gula]

Could you show us a few more pictures of how you attached your servo for the steering, and your rear suspension triangulation.

[KING BLING]

I Just Recently Did. Im Taking The Year Off And Going R/c Crawling. I Want To See Where 1/1 Comp Scene Is Going For 2007. Im A Little Board With It.

[TwistedCreations]

Could you show us a few more pictures of how you attached your servo for the steering, and your rear suspension triangulation.
look for JIA's "Ralph" buildup. He had put his servo there

EDIT- here http://www.rccrawler.com/forum/showpost.php?p=545909&postcount=121

[KING BLING]

The Wheely King Steering Has The Cantilever On It. I Took It Out The First Time And The Steering Kept Locking Up So I Made The New Parts. The Cantilever Now Was Made From A Servo Arm That Was Drilled Out And I Put A Roll Pin In It And Drilled The Axle Mount All The Way Threw.

As Far As Picks Those Are The Best I Have Wright Now. The Upper Tri Angulated Links Were Made From Brakeline With Allthread Welded In.

[Just Zach]

I'm impressed, very impressed. I already knew I wanted a tuber but not I need one with wheelie king axles. Really one of the coolest comp rigs I've seen."thumbsup"

[Kranberry]

the 1:1 looks realy a like this one in the for sale section
http://www.rccrawler.com/forum/showthread.php?t=57546http://i77.photobucket.com/albums/j61/yukon635/P9100121.jpg

[KING BLING]

the 1:1 looks realy a like this one in the for sale section
http://www.rccrawler.com/forum/showthread.php?t=57546http://i77.photobucket.com/albums/j61/yukon635/P9100121.jpgWHAT?

[Gula]

look for JIA's "Ralph" buildup. He had put his servo there

EDIT- here http://www.rccrawler.com/forum/showpost.php?p=545909&postcount=121


All i see are red X's on JIA's. I can actually see these the ones on here."thumbsup"

[JasonInAugusta]

Nice WK build! :mrgreen:

That's #3 on the forums so far and I'm sure there are many more to come.

Gula, my images are working. Not sure why you can't see'm.

[D.I.L.L.I.G.A.F.]

that is one sweet rig love the wheelie king axles to0 ..."thumbsup"

[dezfan]

Very interesting idea running w/o the springs. Makes sense, I'll have to try it some time.

[KING BLING]

Thanks Guys. I Tell Ya, It Is Alot Harder To Make A Scale Type Chassis Than I Thought It Would Be.

[Wrecker]

WOW, you are the man.
All of your builds are freakin amazing (r/c's and 1:1's).
Keep up the great work.

[Rockmuncher]

That looks great so do your 1:1s
Sure your not Stv:flipoff::lol:
Shane

[bigflex]

ok I have decided that my next build will have to be with WK axles that rig is sick man!"thumbsup"

[KING BLING]

That looks great so do your 1:1s
Sure your not Stv:flipoff::lol:
ShaneWOW, NEWS TRAVELS FAR.

[KING BLING]

The Steering Didnt Hold Up For Long, So I Made A New Bracket. Also I Have To Sell It, So Check In The For Sale Section.

[hardcore]

that thing is kill just bought a wheely king my self but man the front axle parts are hard to get!

[Kranberry]

that thing is kill just bought a wheely king my self but man the front axle parts are hard to get!
check this out the uk as a 4x4 already!!
http://www.rccrawler.com/forum/showthread.php?t=59128
http://www.hpieurope.com/kit-info.ph...n&partNo=10831

http://www.hpieurope.com/graphics/kits/kitpages/10831/side_en.jpg
its ligit

[JasonInAugusta]

Can't wait to wheel this one! :mrgreen:

[Unimoger]

Can't wait to wheel this one! :mrgreen:

did you buy the king bling wk crawler too? how many tubers do you have now?:roll:

[racerx]

Tuber whore!!! Save some for the rest of us!:flipoff:

[ThinkTank]

did you buy the king bling wk crawler too? how many tubers do you have now?:roll:

He bought it"thumbsup"
http://www.rccrawler.com/forum/showthread.php?t=62324

[JasonInAugusta]

did you buy the king bling wk crawler too? how many tubers do you have now?:roll:

Tuber whore!!! Save some for the rest of us!:flipoff:

Ben, I think I'm at six now. Seven if you count Suicide Sally.

Don't be hatin'! :lol:

[racerx]

Too late!:lol::lol:

[JasonInAugusta]

Hey!

At least I'm not sniping the rigs out of the FS forum like Ben was doing a while back. :lol:

I did let it sit for a while. :mrgreen:

[scorpion_king]

How do those shocks work? are you runing any springs ir no?:|