***Hustlers are back***

[Rockpiledriver]

Only 8 available get em while you can. "thumbsup"

A Hustler just won again this last weekend, that's 3 weeks in a row now.:twisted: Against some of the best drivers in the Nation.

Got a comp coming up? Why not give a Hustler a try and see if it can help put you in the winners circle too. "thumbsup"

[chino63]

Can one be bought without all the links and stuff? How much for just the chassis and panels? Just curious cause it would be a sweet 2.2 if I can shoehorn a motor and trans in it.

[racerx]

2.2's are coming soon!;-)

[chino63]

2.2's are coming soon!;-)

I don't want one soon! I want one now! Just kidding, Sounds good to me, can't wait to see one!"thumbsup"

[mikestoys]

2.2's are coming soon!;-)

yah, not soon enough... :lol:

[chip cross]

yea when are the 2.2 comin

[clarkrw3]

Are they all gone?? none are showing on the site.

[Tanis]

Are they all gone?? none are showing on the site.
You have to be quick, they don't last more than a day or two.;-)

[Racer4Life]

What about the 2.2 version. Any word on a possible release date and price?

Just need to know how much money to have in my account on the release date! Don't want to miss out on the first batch!

[Rockpiledriver]

What about the 2.2 version. Any word on a possible release date and price?

Just need to know how much money to have in my account on the release date! Don't want to miss out on the first batch!

No, we do not have a release date on the 2.2 yet sorry.

[Racer4Life]

No, we do not have a release date on the 2.2 yet sorry.

Save one for me???? Please!!!!:lol:

[Rockpiledriver]

Soo...When am I going to send you the first Hustler 2?:lol: :lol: :lol:

What :?

[Rockpiledriver]

I was joking about the duct tape stick. WHICH WAS FOR MOCK UP REASONS ONLY!!!

Ahhh..... gotcha :lol:

[jlnash]

Hey I looked on the site and it still says that you are out of stock so I was wondering how to buy one becuase I will buy one right now if someone tells me how

[bill c]

i got my hustler. its so bad a$$. thanks rcp, good job. keep up the good work....... bill

[jlnash]

Hey so I am not the only person wondering were they are at I check the RCP site every hour to see if there are any in stock and there arn't so whats up? I want one if you have any?

[Rockpiledriver]

Hey so I am not the only person wondering were they are at I check the RCP site every hour to see if there are any in stock and there arn't so whats up? I want one if you have any?

There was a delay on this batch. All I can tell you is, they are scheduled to ship to us tomorrow. Shipping will take a few days.

[1beatjeep]

is this for the 2.2 or the supers.if i miss something on here about the 2.2 or super sorry.

[Rockpiledriver]

is this for the 2.2 or the supers.if i miss something on here about the 2.2 or super sorry.

The 2.2 version has not been released yet. These are super chassis.

[tommyjohnston]

Hey Rockpiledriver can you empty your pm box so I can send you something!"thumbsup" Actually ask you something.

[1beatjeep]

thanks for clear this up

[jlnash]

Hey,
I've been watching the site for the hustler and RCP does not have any in stock. DO you have to pre order them or something? Thanks"thumbsup"

[wallaz]

Howdo Gents.

Do you have any frames in stock or if not when would you be producing your next batch?

[Rockpiledriver]

Howdo Gents.

Do you have any frames in stock or if not when would you be producing your next batch?


We have some chassis now. We are supposed to get the links for them today. If we do they will be on the site this evening.

[cwazyduck]

I saw the pics of the 2.2 hustler, now I want one. Is there a waiting list for these little gems, or is it going to be first come first serve when they come out?

[jlnash]

Hey RCP did you guys ever get in the links for the hustler so that people can buy them

[wallaz]

We have some chassis now. We are supposed to get the links for them today. If we do they will be on the site this evening.

Any updates on these frames??

[Rockpiledriver]

We have been getting the run around from this machine shop for the past 3 weeks. Day before yesterday we were told that after having these on order for over month, they can't do them now. Then, yesterday they called and said they may be ready today. So we don't know what to expect. We have ordered another lot of links through a different shop that has never let us down, but is more expensive, and is e few weeks out.

In the meantime all we can do is wait and see if shop A comes through.

I apologize to all that have been waiting on the Hustlers.

[TJ_Shunk]

Any idea when the 2.2 version will be released?

[Rockpiledriver]

Any idea when the 2.2 version will be released?

It is still unconfirmed by the designer.

[Unimoger]

sent you a PM on the super"thumbsup"

[Rockpiledriver]

sent you a PM on the super"thumbsup"

Got it, you have a reply.

[NoBrakes]

When will you have more Hustler kits in stock i just checked your site it says your out of stock...:?:

[Rockpiledriver]

We have been getting the run around from this machine shop for the past 3 weeks. Day before yesterday we were told that after having these on order for over month, they can't do them now. Then, yesterday they called and said they may be ready today. So we don't know what to expect. We have ordered another lot of links through a different shop that has never let us down, but is more expensive, and is e few weeks out.

In the meantime all we can do is wait and see if shop A comes through.

I apologize to all that have been waiting on the Hustlers.

:roll:

[TJ_Shunk]

It is still unconfirmed by the designer.


Thanks for the update. It would be nice to see these floating around....

[redbaron]

We have been getting the run around from this machine shop for the past 3 weeks. Day before yesterday we were told that after having these on order for over month, they can't do them now. Then, yesterday they called and said they may be ready today. So we don't know what to expect. We have ordered another lot of links through a different shop that has never let us down, but is more expensive, and is e few weeks out.

In the meantime all we can do is wait and see if shop A comes through.

I apologize to all that have been waiting on the Hustlers.

Need a good shop? PM me if you are interested.

TIM......

[Rockpiledriver]

7 in stock ready to ship. "thumbsup"

[clarkrw3]

that would be 6. now how about those 2.2's so I can put those new WK axles to good use.

[EddieO]

Make that four.....I am greedy and bought two....

Later EddieO

[Reflection]

Make that 3 left:lol: Thanks allot Brian and everyone else at RCP.

New build coming soon. Waiting on parts,the chassis should be here any day.

[Racer4Life]

Make that four.....I am greedy and bought two....

Later EddieO

EddieO getting some Hustlers...what will the world come to next?:lol:

Tom

[racerrandy]

Five bucks says EddieO won't be putting handwound Axioms in his rig.:lol: :lol: :lol:


Later,Randy

[BikerTrash]

2 left, if all the buyers are posting. "thumbsup"

[EddieO]

Crap, I can't hide anywhere without people knowing me.....

Hell no axiom motors.....


Try Prototype 5 segment arms in Checkpoint cans....


Later EddieO

[Rockpiledriver]

1 left

[wallaz]

Your site says none but this thread states one.

If you have one I'll take it.

I need some other items to be shipped also so will sort it all tonight after work.

[Racer4Life]

Your site says none but this thread states one.

If you have one I'll take it.

I need some other items to be shipped also so will sort it all tonight after work.

That was posted right before the last one was purchased. The inventory on his site is updated as the items are purchased. You will have to wait for the next shipment.:-(

[TorqueMonster]

When is the next shipment? I WILL take one. Man I had the page on rcp loaded and was going to buy and was transferring some bank funds and when i clicked "buy" it was gone.... :shock: Ruined my day hahaha.. no really... Let me know I NEED my clod hustled!! 8)

Thanks!!

[Cake Eater]

Hey RockPileDriver, clean out your mailbox...;-)
I tried PM'ing you, but this will have to do:
I am very interested in getting a Hustler Roller (on your website, it's part # Hustler 2). Do you have any right now? When would that be available? Is there a waiting list?
Thanks..."thumbsup"

[Racer4Life]

Nice write up in the new RCCA. can't wait for the 2.2!!

[Rockpiledriver]

Hey RockPileDriver, clean out your mailbox...;-)
I tried PM'ing you, but this will have to do:
I am very interested in getting a Hustler Roller (on your website, it's part # Hustler 2). Do you have any right now? When would that be available? Is there a waiting list?
Thanks..."thumbsup"



We are waiting on a shipment of Hustlers this week. Once they go up on the site they are usually sold the same day. We don't take pre-orders on the #Hustler 1, but we can do something on the #Hustler 2. Send me an email at john@rcpcrawlers.com and I will work out the details for you.

Thanks
RCP Crawlers, Inc
Rock Crawling R&D Specialists
Over 250 truck kits, parts and accessories and growing each week!
www.rcpcrawlers.com (http://www.rcpcrawlers.com)

[rcjunky3]

you guys are wesome got mine the other day and cant wait to get it built thanks for the great service from your staff

[Rockpiledriver]

Nice write up in the new RCCA. can't wait for the 2.2!!

Thanks, working out the details now, to get the 2.2 in production. I don't have an availability date as of yet, but we will post something on our website as soon as it is known.

Thanks
RCP Crawlers, Inc
Rock Crawling R&D Specialists
Over 250 truck kits, parts and accessories and growing each week!
www.rcpcrawlers.com (http://www.rcpcrawlers.com/)

[Racer4Life]

Thanks, working out the details now, to get the 2.2 in production. I don't have an availability date as of yet, but we will post something on our website as soon as it is known.

Thanks
RCP Crawlers, Inc


Make sure and put me down for one!!:-P

[dgullickson]

Crap, I can't hide anywhere without people knowing me.....

Hell no axiom motors.....


Try Prototype 5 segment arms in Checkpoint cans....


Later EddieO

Eddie hates Axiom Motors, he throws them on the ground :roll:

He would rather run HV :lol::lol:

[broncoholic]

Any word on when the hustlers are going to be back in stock? I want one"thumbsup" "thumbsup"

[Rockpiledriver]

Early next week is what we have been told. 8)

[Reflection]

Sorry Brian,just looked at your site,seen what I needed to see. I'll order up a tranny here pretty quick"thumbsup"

[dezrik]

I demand a RCP Hustler, ASAP! lol i need it for backyard bashing here in Meeker, Colorado, Can i pre-order?

[Rockpiledriver]

I demand a RCP Hustler, ASAP! lol i need it for backyard bashing here in Meeker, Colorado, Can i pre-order?

:lol: Next week.

[TBex]

How often do you have hustlers in stock? I plan on ordering one within the next month or so if you have them stocked. Ive been off the forum for about 6 months and gone way behind on the news so do the hustlers have room in the chassis for the battery and electronics or do they mount on the axles?

[Rockpiledriver]

How often do you have hustlers in stock? I plan on ordering one within the next month or so if you have them stocked. Ive been off the forum for about 6 months and gone way behind on the news so do the hustlers have room in the chassis for the battery and electronics or do they mount on the axles?

We get a limited amount every week to every other week. They usually sell out before the days end on the day they go up on the site. That is why they are mostly "Out of Stock". The batteries and electronics will fit inside the chassis.

RCP Crawlers, Inc
Not just another Online Store.
Rock Crawling R&D Specialists.
Over 250 truck kits, parts and accessories and growing each week!

[wallaz]

If I am fortunate enough to catch them on your site how much extra do I need to add for shipping to the UK?

I would hate to think I would miss out on one while waiting for postage costs?

[SinlessHarbor]

Did you release some hsutlers last week, did I miss them? I checked everyday last week.:-(

[Rockpiledriver]

Did you release some hsutlers last week, did I miss them? I checked everyday last week.:-(

No unfortunately we did not receive any last week. We have been promised that some will be here this week.

[Just Zach]

2.2? asked hopefully;-)

[al3x_34]

hi i really want one could i preorder one also how much is the postage to the uk

[CD13]

When are expecting your next shippment?I have money burning a hole in my pocket

[clodbuilder99]

When are expecting your next shippment?I have money burning a hole in my pocket


SAME HERE!!!!!

[Rockpiledriver]

SAME HERE!!!!!

The kits should be ready to go up on the site shortly. If I were looking to get one, I would be watching the site or following the threads in the RCP Crawlers vendor section for the annoucement.

[wallaz]

If I were looking to get one, I would bewatching the site or following the threads in the RCP Crawlers vendor section for the annoucement.


That can prove to be quite awkward if you are outside the US and with the time differences.

For example.....if you update the site late evening I could well be tucked up in bed and by the time I get up in the morning to check they'll all be sold.

Is there the possibility for those that want to, to pay in advance?

[CD13]

Are you gonna sell just the chassis?

[Rockpiledriver]

Are you gonna sell just the chassis?

We will make available a small amount of both chassis kit and roller kit for this next release.

[Rockpiledriver]

That can prove to be quite awkward if you are outside the US and with the time differences.

For example.....if you update the site late evening I could well be tucked up in bed and by the time I get up in the morning to check they'll all be sold.

Is there the possibility for those that want to, to pay in advance?

There are not that many chassis kits that come in each shipment. I understand it will be difficult for those on different time zones, to purchase once they go up on the site, due to the time zone difference.

We are currently working on a program that would involve the manufacturing of many kits, rather than just a few. It won't be too much longer that there will be enough to go around without them selling out in the first few hours. We will then have enough kits to sell to distributors, so there will be more than just one site to purchase from.

Thank you for your support and patience.

[bbyrd22]

Have the next group of chassis's already sold out?

[Rockpiledriver]

Have the next group of chassis's already sold out?


The next shipment hasn't sold out, because we have not taken any pre-orders.

The next shipment will consist of 1/2 chassis kits and 1/2 roller kits. You will be able to upgrade the chassis kit to a roller, but you won't be able to change a roller order to a chassis kit.

If anyone is interested in getting one from this next shipment, I would be ready to purchase within the next 30 minutes.:shock: ;-)

[Rockpiledriver]

I just added this batch of chassis and rollers. "thumbsup"

[bbyrd22]

paypal'd. Thanks.

[Rockpiledriver]

paypal'd. Thanks.

That was quick, Thank you. 8)

[broncoholic]

I just ordered the last one I think. can't wait to get it."thumbsup"

[Rockpiledriver]

I just ordered the last one I think. can't wait to get it."thumbsup"

Thanks for the order. We will get this out to you ASAP. We still have rollers available.

[Rockpiledriver]

We still have rollers available.

No we don't they are all gone. Thanks everyone! "thumbsup"

[Rockpiledriver]

There are a few Hustlers available on the site now. Get em while you can.;-)

[brushlessnut]

any hustlers left?

[G-crawler]

Rockpiledriver: I have tryed contact u tru mail but havent got any answers so i try here, i orderd a super hustler from u a few days ago, but dont know really whats up with my order, has it shipped yet or what?

Best regards
Kalle Ericson
Sweden

[Rockpiledriver]

Rockpiledriver: I have tryed contact u tru mail but havent got any answers so i try here, i orderd a super hustler from u a few days ago, but dont know really whats up with my order, has it shipped yet or what?

Best regards
Kalle Ericson
Sweden

I replied, check your inbox again. ;-) It shipped today. We have been moving since Saturday and are just finishing up today. We have also been shipping orders during this time which is the reason for the delays in some responses to e-mails.

Sorry about that.

[G-crawler]

Thanks! :) hope everytings turns out good for ur new home! later!

[jamesbernatchez]

Im planning on making an impulse buy for a Super class hustler kit(just the one with link mounts, etc for the $330 or so.) any idea when more will be instock?

James

I have a comp on the 9th that id like to run Super in if possible :)

[Rockpiledriver]

Im planning on making an impulse buy for a Super class hustler kit(just the one with link mounts, etc for the $330 or so.) any idea when more will be instock?

James

I have a comp on the 9th that id like to run Super in if possible :)

The next shipment of Hustlers will be the 2.2's. They will be in this week. The next batch of supers probably won't be in for another week or two. We just sold out of our last batch last weekend.

[Racer4Life]

The next shipment of Hustlers will be the 2.2's. They will be in this week. The next batch of supers probably won't be in for another week or two. We just sold out of our last batch last weekend.


Wooo Hooo Remember I am first on the list for the 2.2!:lol:

[halfcab]

Wooo Hooo Remember I am first on the list for the 2.2!:lol:

you suck, I think I'm #18, just waiting for the second batch:-(

[wyattburp]

Any idea of how many 2.2's you'll be getting in?

[Silverdirt]

cant wait im # 2"thumbsup"

[CD13]

Whats the eta on the next batch of supers?I am always at work when they go on sell,can I pay for it in advance?

[Rockpiledriver]

Whats the eta on the next batch of supers?I am always at work when they go on sell,can I pay for it in advance?

We don't know for sure. We are going to try to squeeze some supers in with the 2.2's. This is why we won't take money up front for them. ;-)

[Silverdirt]

has the first batch of 2.2's arrived and been distributed or havent they shown yet?

[Rockpiledriver]

has the first batch of 2.2's arrived and been distributed or havent they shown yet?

We received a few. I am contacting the first few on the waiting list. We should start getting shipments of 10 chassis each week on a regular basis.

[CD13]

maybe you could start a list for supers,like the 2.2's?

[boggercrawler]

hey guys, how do I get on the list for the 2.2's?

[Racer4Life]

hey guys, how do I get on the list for the 2.2's?


Here!!
http://www.rccrawler.com/forum/showthread.php?t=71930

[8500lbs]

i didnt know which thread you would look at so i will post on both. i am DESPERATE to get a hold of a hustler chassis. what ever i can do to help get one please let me know. if i need to prepay or pay extra let me know. i will do my best to work with you. i am not picky i will take whatever i can get. a 2.2 or a super.

thanks.

[Echodawg]

I'm interested in a super as well.

[wallaz]

Probably the wrong place to post this, if so I apologise, however does anyone know what the spring rate is of the internal shock springs that come with the kit?

I have found a supplier in the UK that does alternative compression springs and I need/would like to know where I'm starting from.

Rate in lb/in or kg/mm.

Thanks