Scale clevises!!!!

[Spdsk8er]

http://www.worthmarine.com/Merchant2/merchant.mvc?

Click on rigging. About half way down the page. 30 cents each too!

[Thorsteenster]

i dont see them.

[1BadJeepBruiser]

WOW great find! those are like a perfect scale too, the 3mm ones. I am ordering some now "thumbsup"

[Thorsteenster]

WOW great find! those are like a perfect scale too, the 3mm ones. I am ordering some now "thumbsup"

where? i didnt see em!
post a better link

[Thorsteenster]

i was hoping for somthing like this
http://dodgeram.org/subs/rballard/ram/1998/photos/Clevi****ch.jpg
http://dodgeram.org/subs/rballard/ram/1998/photos/Clevi****ch.jpg

[1BadJeepBruiser]

where? i didnt see em!
post a better link

try this

http://www.worthmarine.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=WPM&Product_Code=FIT-P402&Category_Code=SR

[Mirage]

Wow, great find, I will be ordering when I get home from work!

[Nitro]

Awesome, I just ordered 6 of those!!"thumbsup"

[Thorsteenster]

try this

http://www.worthmarine.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=WPM&Product_Code=FIT-P402&Category_Code=SR

post some pics when you get em, i'd like to see em a little better before i jump on the bandwagen.

[1BadJeepBruiser]

post some pics when you get em, i'd like to see em a little better before i jump on the bandwagen.

Will do, they are in route, I had a ruler sitting here and they seem to be a good size so I placed an order. We shall see soon enough "thumbsup"

[sleek6mt]

thanks for sharing

these hooks are killer too
http://www.worthmarine.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=WPM&Product_Code=FIT-P404&Category_Code=SR

[FrankyRizzo]

Great find!

[Spdsk8er]

Thanks. there are also some hooks on there under standing rigging that look perfect for winches....

[skogsvild]

Here are a nice block. That would look killer with a winch and if you winch isnt strong enough here are the medicin :)

http://www.worthmarine.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=WPM&Product_Code=FIT-P515&Category_Code=RR

[big bronco]

thes can hold more if u rally wana use em nd they look kool =)

http://www.worthmarine.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=WPM&Product_Code=FIT-P525&Category_Code=RR

[Mirage]

Anyone get their orders from this place yet?

I want to get the shackles for my F-100 tuber Im building, but I need something like this

http://www.worthmarine.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=WPM&Product_Code=FIT-P455&Category_Code=SR

However I need the bolt to be 3mm so it can thread into 3mm nuts already welded in the frame. My question now is does anyone know where I can get such a piece of hardware? Or I wonder if it would be possible to grind off the head of it and solder it to a hex head bolt??? anyone think that would be strong, or even hold?

[1BadJeepBruiser]

I am still waiting on mine, hopefully they will be here soon "thumbsup" Ill take pics and stuff when they arrive

[Mirage]

I am still waiting on mine, hopefully they will be here soon "thumbsup" Ill take pics and stuff when they arrive


Cool, any idea about my second question:?:

[Nitro]

I recieved my today! The first pic is of the 3mm ones next to a penny, the other pics are of the 5mm on my Jeep.
_____________________http://i137.photobucket.com/albums/q234/Nitro_2007/100_1320_00.jpg___________________________________ ______________________
http://i137.photobucket.com/albums/q234/Nitro_2007/100_1317.jpg______________________________________ ___________________
http://i137.photobucket.com/albums/q234/Nitro_2007/100_1318.jpg

[Wrecker]

Those are sweet. I'm going to have to pick up some of those for the scaler.

[Spdsk8er]

Wow! im surprised how scale they are! I'll have to order some.

[Mirage]

Can we get a picture of the 2 different types side by side? Thanks.

Im still trying to figure out how Ill mount them to my truck, I might have to have someone weld mounts on the frame.

[1BadJeepBruiser]

I recieved my today! The first pic is of the 3mm ones next to a penny, the other pics are of the 5mm on my Jeep.
_____________________http://i137.photobucket.com/albums/q234/Nitro_2007/100_1320_00.jpg___________________________________ ______________________
http://i137.photobucket.com/albums/q234/Nitro_2007/100_1317.jpg______________________________________ ___________________
http://i137.photobucket.com/albums/q234/Nitro_2007/100_1318.jpg


What da... where are mine ??:evil: these things are taken a long a$$ time to get here

They do look awesome those :mrgreen:"thumbsup"

[raul duke]

I got mine last week, finally got them mounted today. These are the 3mm, I like em.

http://i141.photobucket.com/albums/r50/climberx/dring.jpg

http://i141.photobucket.com/albums/r50/climberx/dring2.jpg

[1BadJeepBruiser]

Got mine too! they are awesome! I just need to install them now :mrgreen:

[Thorsteenster]

they do look pretty good, being that small looks dont make much diference being square instead of rounded, the metal itself.

[Mirage]

Well, I finally broke down and ordered some myself.

[Terminator13]

How strong are they? Are they just for show or can they really be used? I'd love a set of them for my jeep build along with the double hooks for a winch and tow strap.

[Thorsteenster]

buy a few of em, they are cheap enough. then if you use one and it breaks you got a replacement and know not to use em next time!

[Reflection]

Sweet looking stuff. Just thinking here,could something like this be used as a fairlead?


http://www.worthmarine.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=WPM&Product_Code=FIT-P472&Category_Code=RR

[gyrene]

That's awsome......I'm in the planning stages of my first crawler and those
will add some nice detail.

[Rok_Dok]

I was thinking the same thing about the fairlead but dont think its going to look all that scale!?!

Anyone find out if these are strong enough to be effective. Our scale course says that winching may be necessary

[Mirage]

Well, I got my parts in as well. I only ordered one of teh double hooks, I shoulda got a couple more, they are better than I expected. If you look closely, you can see they are actually 2 hooks that are held together with a clevis.

http://img338.imageshack.us/img338/1924/1000317ae1.jpg (http://imageshack.us)
http://img299.imageshack.us/img299/4200/1000318ku7.jpg (http://imageshack.us)

[obijuan]

could you stick them next to a penny or something? for reference

[Mirage]

could you stick them next to a penny or something? for reference


http://img252.imageshack.us/img252/8295/1000350zh7.jpg (http://imageshack.us)

[offroad1911]

I got mine last week, finally got them mounted today. These are the 3mm, I like em.

http://i141.photobucket.com/albums/r50/climberx/dring.jpg

http://i141.photobucket.com/albums/r50/climberx/dring2.jpgAre those link ends that you used to mount them?And if you would pm me a full pic of your jeep i kinda been keeping a scrap book of every jeep pic i find for referrences thanks."thumbsup"

[Mirage]

Are those link ends that you used to mount them?And if you would pm me a full pic of your jeep i kinda been keeping a scrap book of every jeep pic i find for referrences thanks."thumbsup"


Look in scale 2.2 section, he has tons of pics of it there "thumbsup"

[obijuan]

thanks for that pic man!

[Mirage]

thanks for that pic man!

No problem, we are all here to help each other out, well at least the majority of the people are. "thumbsup"

[bktoys]

How strong are they? Are they just for show or can they really be used? I'd love a set of them for my jeep build along with the double hooks for a winch and tow strap.

these are very strong cause i've used them on xlarge sail boats with 5 foot mast in high winds broke hi tensile rigging wire .Besides that they are made out of 303 stainless steel. ijust ordered a bunch for my scale 53 chevy pu
"thumbsup" "thumbsup" "thumbsup"

[BGGruff]

Great find! I'll be getting some of these for sure!:)

[bktoys]

Are those link ends that you used to mount them?And if you would pm me a full pic of your jeep i kinda been keeping a scrap book of every jeep pic i find for referrences thanks."thumbsup"

if you look further down the page in standard rigging you can find some kool eye bolts that are used with the shackles, the 3mm and the 5mm ones all fit those eye bolts"thumbsup""thumbsup""thumbsup"

[constantmotion]

Anyone order one of the "snatch blocks"?

http://www.worthmarine.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=WPM&Product_Code=FIT-P515

[Mirage]

If they are anything in quality like the clevises hooks, etc... then they should look and work very well.

[constantmotion]

Got my clevis' and eyelets in a few days ago......that are perfect scale and look awesome.

[RCJunkie80]

Did anyone get some swivel shackles? Looks like they could be pretty cool for leafed rig.

[Mirage]

Did anyone get some swivel shackles? Looks like they could be pretty cool for leafed rig.


Im not really certain what you would use the swival shackles for?

But these parts are all too small to be use in any kind of suspension rigging. These are strictly for tow points only.