wheel adapters?

[Lunatic]

i have these tires on my dirt demon. they came pre-glued with out foam.
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXERS7&P=7
they seem perfect for crawling, well when compared to these that i have on my crawler.
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXEPB4&P=ML

i would like to put the dirt demon tires on my crawler, but im using the stock e-maxx hubs. i believe they are 12mm hex the dirt demons are 19mm hex. since the tires are glued i dont want to take them off even if i did i dont have anything that will fit the tire. so does anyone know a way for me to do this? maybe an adapter? ive tried looking every where but ive had no luck.

any help would be appreciated
thanks

[clodossal]

Here you go ya lunatic,

Try these,
http://www.rcrock.com/shopx/go.cgi?&shop=city&cart=32861474x23857&session=40d0 55565d316d22&L=eng&P=MCT422

Just drill out to suit your axle size and do the grub screw up into one of the holes from the axle pin and your on your way.

Simple/ no modification to your max and you can go back to the maxx wheels easily.

[Reflection]

The maxx hubs are 14mm. You need these for a Twin force.http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXGGB9&P=M These will go over the top of your maxx 14mm hex's and get you to 19mm to fit your wheels.