scale axles

[Wicked_Jester]

im thinking about building a larger scale tuber simular to a "poison spyder bruiser 5", what would be a good looking scale axles, im looking to use 40 series wheels and tires

[Got Rocks?]

for strength and simplicity look into twinforce/madforce axles8)

[Wicked_Jester]

ok, i know it wouldnt be scale but would rc4wd's raptor axles work

[Got Rocks?]

well if ya want scale get the twin/mad if im correct the raptor axles are a clodtype axle with motors on them;-)

[Wicked_Jester]

yes i know the motors are on the axles, im looking for the best performing axles, for a large scale tuber, which will be simi scale

[Got Rocks?]

yes i know the motors are on the axles, im looking for the best performing axles, for a large scale tuber, which will be simi scalei still say twinforce/madforce;-)

[Wicked_Jester]

ok thanks, i might try it both ways, if the budget is good, and if the raptors dont work out like i want i will use them on a comp super class rig

[smokinubyrc]

ok thanks, i might try it both ways, if the budget is good, and if the raptors dont work out like i want i will use them on a comp super class rig

do you know rc4wd have you ever orderd from their

By the time you get those rapter axles i bet something will be wrong on them or they will be missing parts

stick with txt mad twin force axles or evenx factor axles"thumbsup"

[Wicked_Jester]

do you know rc4wd have you ever orderd from their

By the time you get those rapter axles i bet something will be wrong on them or they will be missing parts

stick with txt mad twin force axles or evenx factor axles"thumbsup"

i think im going to try one of those axles first, hopefully they work good, I see you live in modesto, i live about 45 minutes north east of you in the little town of valley springs, when i get my crawler done we should go crawl together, where are there good places to crawl at around here??

[Kranberry]

for strength and simplicity look into twinforce/madforce axles8)
you can use wk axles to the are almost 1/6 size maby 1/7-8
http://www.rccrawler.com/forum/showpost.php?p=677642&postcount=176

[smokinubyrc]

i think im going to try one of those axles first, hopefully they work good, I see you live in modesto, i live about 45 minutes north east of you in the little town of valley springs, when i get my crawler done we should go crawl together, where are there good places to crawl at around here??

my dad lives in copper and my step bother lives in san andreas SP?
i havent been up their to crawl mainly i crawl with the www.nor-calrcrc.com guys

[Wicked_Jester]

cool, it will be a while bofore my rig is done, most of my money is tied up in 1/10 scale nitro truck racing and electric touring car racing, im going to try and sell my backup nitro truck and that alone will give me enough to build any rig i want

[smokinubyrc]

cool, it will be a while bofore my rig is done, most of my money is tied up in 1/10 scale nitro truck racing and electric touring car racing, im going to try and sell my backup nitro truck and that alone will give me enough to build any rig i want i used to race my maxx at the track in sanora but since it went under new ownership a few years ago i never went back :-( ide like to check into and see if they race 1/8 scale their

[Wicked_Jester]

i will check next time im up there, i havent tried racing my maxx anywhere, i like how fast my losi xxx-nt is, but im looking at slowing down the pace and start crawling

[Monster RC]

I would go with the Twin/mad force axles they are tough and good looking
Only down side as I see it might be parts availability

[RED DIRT671]

well if ya want scale get the twin/mad if im correct the raptor axles are a clodtype axle with motors on them;-)

WELL I SAY X FACTOR AXLES FOR TE SCALE LOOK AND THE DURABILATY FOR YOUR TRUCKS POWER!!:lol:

[Auto-xer73]

I'm going to try wheely king axles because they are cheap

[dezfan]

PLEASE STOP TYPING IN ALL CAPS, IT MEANS YOUR YELLING!!!

Hello pot, this is kettle.

[smokinubyrc]

Hello pot, this is kettle.
lolz