New Products Just Added **Check out the Pics** RCP Crawlers

[Rockpiledriver]

Added some new stuff to the site. See pics below. We have taken pictures of over 30 more " In Stock" new products. I will work to get these up shortly. We usually have more products than what is shown in stock on the site. We don't have auto inventory on the site yet and use these quantities as our default. Our new site will have auto inventory adjustments. We encountered some obstacles on the new site, but it is coming along quickly, now. Shouldn't be long before it goes live.



http://img242.imageshack.us/img242/8759/sitepic2cc5.jpg

http://img337.imageshack.us/img337/9329/sitepic1bd7.jpg

http://img255.imageshack.us/img255/1474/sitepic3ep2.jpg

http://img255.imageshack.us/img255/1722/sitepic4jt0.jpg

http://img242.imageshack.us/img242/5403/sitepic5xe4.jpg

http://img79.imageshack.us/img79/641/sitepic6bs6.jpg

http://img79.imageshack.us/img79/8730/sitepic7zn3.jpg

http://img79.imageshack.us/img79/9371/sitepic8ig4.jpg

http://img339.imageshack.us/img339/3053/sitepic9ld2.jpg


http://img242.imageshack.us/img242/7504/sitepic10yp5.jpg

http://img253.imageshack.us/img253/1940/sitepic11vm0.jpg

Just a few other items going up on the site.

RC4WD Scale White Shocks
Scale FJ Cruizer Hard Body
Scale Land Rover Hard Body
Scale Hummer H2 Hard Body
RC4WD Black 2.2 Machined Wheels
Holmes Hobbies Crawlmaster motors
TXT Drive Shaft
Traxxas new connectors (Tamiya replacement)
2.2 Rear Dig Kits
TCC 2.2 and 40 series rock rings
RC4WD Black Raptor Axles
RC4WD V3 portals
Traxxas Transmitter and receiver/crystals
Delrin Clod Lockers
TLT aluminum custom knuckles ~ Black and clear anodized
RC4WD vertical clod servo mounts
Axial Pre-Narrow 40 Series Beadlocks (All colors and styles available)
TLT complete stock and comp ready axle kits. (Waiting on one part from our supplier $79.99 for two complete stock axle kits)
Clod complete stock axle kits (Waiting on one part from our supplier, $119.99 for two complete axle kits)
Complete set of Clod metal gears and locker

Edit: for spelling

[jamesbernatchez]

Very nice! I might have to pick me up some of those Integy axle tubes for the clod axles.

[NoblesvilleKid]

Awsome, one question, will the cooler have a lid and will there be ice. Thanks for the great products.

[Rockpiledriver]

Very nice! I might have to pick me up some of those Integy axle tubes for the clod axles.

The combo axle tube/JP knuckle package is a great value, if you want a heavy duty set up. We have bearings available for both CVD or stock set ups.

[Rockpiledriver]

Awsome, one question, will the cooler have a lid and will there be ice. Thanks for the great products.


The lid is shown in the picture. Kind of blends in with the background. Yes, we have ice. Need to get the pic up on the site.

[NoblesvilleKid]

The lid is shown in the picture. Kind of blends in with the background. Yes, we have ice. Need to get the pic up on the site.
Ok, thanks, I guess something is wrong with my eyes because i still dont see the lid, but I believe you."thumbsup"

[chivas72]

when are you expecting to have the web site completly updated ? ? ?

still waiting for you to re stock the tlt spare parts

[Rockpiledriver]

Ok, thanks, I guess something is wrong with my eyes because i still dont see the lid, but I believe you."thumbsup"

It is resting to the left side up against the cooler. I can see it on my screen but lighting with your screen may show it as a shadow.

[NoblesvilleKid]

Ok, I see it now, I thought it was next to a wall. Thanks. I will be ordering some parts soon

[Rockpiledriver]

when are you expecting to have the web site completly updated ? ? ?

still waiting for you to re stock the tlt spare parts

We are waiting from our supplier for the TLT diff covers and pinions. They are due in this week. Once we have these, we will offer complete tlt axle kits at great value of $79.99 for a pair.

We have a shipment of metal ring and pinions coming in today/tomorrow. Once we test out this batch, we will offer comp ready TLT axle kits with all the goodies. The comp TLT axle kits will be a great value as opposed to buying everything separately.

[TxCruzr]

2.2 Rear Dig Kits



for tlt? do tell :lol:
That is a lot of new stuff you are adding and it covers both scale, comp, and weekend bashers. Keep up the great work "thumbsup"

[Rockpiledriver]

for tlt? do tell :lol:
That is a lot of new stuff you are adding and it covers both scale, comp, and weekend bashers. Keep up the great work "thumbsup"

We ordered and received all the pieces to make rear dig drive shafts for the 2.2 set ups. One of the RCP Team drivers is making them for us to offer on the site.

[1BadJeepBruiser]

Nice new additions "thumbsup"

When do you guys expect to have the "chino" Bruiser/mountaineer pede trans /skid and 4 link mounts available?

-Mike

[clarkrw3]

Are going to be selling the bushings to mate the stock knuckles (or JP knuckles) to the Integy axle tubes??

[FrankyRizzo]

I have got to get the charcoal.

[Rockpiledriver]

Are going to be selling the bushings to mate the stock knuckles (or JP knuckles) to the Integy axle tubes??

We have enough flanged bushings to offer with the combo JP Knuckle/allum axle tube kits. We are ordering some separate flanged bushings to offer with the axle tubes alone. Once they come in, we will put the axle tubes on the site with the bushings.

Does that answer your question or do you already have the Integy tubes?

[clarkrw3]

We have enough flanged bushings to offer with the combo JP Knuckle/allum axle tube kits. We are ordering some separate flanged bushings to offer with the axle tubes alone. Once they come in, we will put the axle tubes on the site with the bushings.

Does that answer your question or do you already have the Integy tubes?
Sort of, I already have the tubes I got from Integy because you and TCS didn't have them, I am only running one set on the front of my Hustler and that is what is holding up the build. Well that and the crawler motors from Holmes. And I got the knuckles from the preorder from JP. I think this hustler is coming together really sweet I will post up pics when it's done, but took your advise and got the frame powder coated blood red, with gun metal CF body panels:twisted::twisted:"thumbsup". Let me know if you can spare one set of bushings for me, if not I understand.

[Rockpiledriver]

Sort of, I already have the tubes I got from Integy because you and TCS didn't have them, I am only running one set on the front of my Hustler and that is what is holding up the build. Well that and the crawler motors from Holmes. And I got the knuckles from the preorder from JP. I think this hustler is coming together really sweet I will post up pics when it's done, but took your advise and got the frame powder coated blood red, with gun metal CF body panels:twisted::twisted:"thumbsup". Let me know if you can spare one set of bushings for me, if not I understand.


PM sent"thumbsup"

[tapped-out]

I would like one of the 2.2 rear dig kits."thumbsup"

[Rockpiledriver]

I would like one of the 2.2 rear dig kits."thumbsup"

So do I. We have to do some more testing and make sure the design will hold up.

[TxCruzr]

any word on the clockable tlt C's?

[Rockpiledriver]

any word on the clockable tlt C's?

Two weeks. We are making some in black anodized aluminum and the balance in Stainless Steel.

FYI, we are not the original designer of these. We have been contracted to manufacture them by another rcc member who first designed and built the prototypes some time ago. He made the prototypes at his shop and sold a few to fellow crawlers. We are making them through the same shop that produces the Fat Rock C's and will have them available through the rcpcrawlers online store shortly.

[1BadJeepBruiser]

Nice new additions "thumbsup"

When do you guys expect to have the "chino" Bruiser/mountaineer pede trans /skid and 4 link mounts available?

-Mike

"thumbsup"

[yukon635]

stainless steel ring and pinion????

have you gotten them in yet?

[chip cross]

http://www.rcpcrawlers.com/pics/axles/IMG_4046%20(2).gif
I'll take three of these lmk when they're ready part # 9404445