PTI Goliath back in stock at www.rcpcrawlers.com

[Rockpiledriver]

That's right we have the Goliath back. $185.99 "thumbsup"

We have been told the 12.5" stretch kit will be ready by the end of the month.

[franeich]

Will RCP be carrying the stretch kit?

[K_Willis]

better question...

will RCP be carrying other spare parts?

[Rockpiledriver]

franeich see first post. ;-)

Kwillis, What would you like to see us carry for spares, we can do that.

[franeich]

I saw first post and it did not say you would be stocking them. But I will assume that means you will be stocking them. thnx

[tomik]

f
Kwillis, What would you like to see us carry for spares, we can do that.

I definately would. Also "tuning kits" like the t-maxx driveshaft -mod and revo cantilevers (with right bearings, 3mm inner dimension) could be a hit?
What do you think?

[K_B]

I think RCP already carries t-maxx shafts, now that I think of it. But I would like to see knuckles, axle gears and axle cases.

[K_Willis]

I think RCP already carries t-maxx shafts, now that I think of it. But I would like to see knuckles, axle gears and axle cases.

x2

most of the other PTI parts come from other manufacturers and are not that difficult to obtain, and heck, don't break that often either. Only other thing I might add to the list would be the dogbones in the axles. HPI Super Nitro dogbones are the right length, and much stronger than the stock PTI ones...

Possibly also the center drive cups that bolt directly to the spur gear, for those people that are still using the CVD bones, they get pretty chewed up after awhile.

off topic, and to RCP, but is it possible at this point to do international orders directly from your website (ie Canada)? Or do we still need to email you with a list of parts and then get a shipping quote?

[Rockpiledriver]

x2

off topic, and to RCP, but is it possible at this point to do international orders directly from your website (ie Canada)? Or do we still need to email you with a list of parts and then get a shipping quote?


Yes, the new site, which will be up very soon, will give you the shipping quote from checkout for international orders.

We do currently offer t-maxx shafts. They are in the tranny section. http://www.rcpcrawlers.com/trannys.html

Thanks for the input guys we will look into getting these items. Anything else?

[tomik]

I know RCP does sell the shafts.
I meant the parts could be sold in the same bag (or at least as one item in the webshop), with all the necessary parts and installation thought through.

I myself don't mind modding a bit as long as I have the right parts (modding is the salt of this hobby), but I know people who just want to drive and are afraid of modding their cars.
And, because the parts are quite hard to get here in the middle of nowhere they often have to be ordered overseas and therefore it would be nice to get everything at once without any hesitation "Did I get all of the parts for sure".

It was just an idea, don't shoot me :lol:.

How about a tuning part to attach battery on the front axle? I think I've read about one made by PTI here, but am not sure. This too can be achieved with velcro, but wouldn't it be nice to have it made of aluminium ?

[Rockpiledriver]

I know RCP does sell the shafts.
I meant the parts could be sold in the same bag (or at least as one item in the webshop), with all the necessary parts and installation thought through.

I myself don't mind modding a bit as long as I have the right parts (modding is the salt of this hobby), but I know people who just want to drive and are afraid of modding their cars.
And, because the parts are quite hard to get here in the middle of nowhere they often have to be ordered overseas and therefore it would be nice to get everything at once without any hesitation "Did I get all of the parts for sure".

It was just an idea, don't shoot me :lol:.

How about a tuning part to attach battery on the front axle? I think I've read about one made by PTI here, but am not sure. This too can be achieved with velcro, but wouldn't it be nice to have it made of aluminium ?

I was in the PTI shop just the other day. They had two new carbon fiber battery mounts sitting on a truck in the fab shop, which allow mounting of standard 6 cell stick packs. The battery plates don't sit directly on the upper links, but are very close to them.

As Brian said, we can stock just about any PTI Racing spare part. Let us know what you are looking for and we will get a bunch to put up on the site.

Edit: I am putting in an order over the weekend, so if you can post what you need, I can pick it up by early next week.

[CarbonShadow]

RCP would you stock the non-crawler goliath too. I really like the look of the monster truck and no real good spots too crawl around here.

[DRCMAN]

I was in the PTI shop just the other day. They had two new carbon fiber battery mounts sitting on a truck in the fab shop, which allow mounting of standard 6 cell stick packs. The battery plates don't sit directly on the upper links, but are very close to them.

As Brian said, we can stock just about any PTI Racing spare part. Let us know what you are looking for and we will get a bunch to put up on the site.

Edit: I am putting in an order over the weekend, so if you can post what you need, I can pick it up by early next week.

It would be great if you guys put parts up online :!::!::!::!:

I am soon to buy one but was waffleing because of parts availability. I guess this makes it a lock "thumbsup" I'll be looking to you guys to buy as soon as I top off the rc budget this month.