Ckrc Wiggle Servos

[KING BLING]

THE WIGGLE SERVO. THESE SERVOS HAVE THE TORQUE YOU NEED FOR 2.2'S OR SUPERS.

I HAVE BEEN SELLING THESE AT THE SHOP FOR 3 MONTHS NOW AND HAVE YET TO SEE ONE BREAK A SET OF GEARS OR GO UP IN SMOKE. THESE SERVOS HAVE FULL METAL GEARS, DUAL BALL BEARINGS, AND 196 OZ/IN TORQUE AT 6V.

EVERY SERVO THAT LEAVES THE SHOP WILL BE TESTED TO MAKE SHURE IT WORKS SMOOTHLY, SO DONT BE WORRIED ABOUT GETTING BAD SERVOS.

THE PRICE IS $34.00 SHIPPED ANYWHERE IN THE LOWER 48 STATES. OUTSIDE THE US, PLEASE PM ME FOR A SHIPPING QUOTE.

PAYPAL TO CKRAWLER@SBCGLOBAL.NET


SPECS:
Dimensions: 1.6 x .78 x .61 inches 40.5 x 20 x 41mm
Speed: .17sec/60deg @ 4.8v, .15sec/60deg @ 6v
Torque: 182oz/in @ 4.8v 196 oz/in @ 6v
Weight: 46Grams 1.73 Ounces
Bearing: Dual Ball
Gears: Metal
HITEC TYPE PLUG

[FinishLineRC]

What kind of servo arms does it use?

[KING BLING]

THE HORN IS LARGER THAN A HITEC ONE. WE HAVE BEEN USING THE ONES THAT COME WITH THE SERVO OR THE ALUMINUM DURATRAX ONES.

http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXHWR1&P=7

[KING BLING]

http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXFVK9&P=7
WE HAVE FOUND THESE TO FIT WELL ALSO.

[mauromj]

Can you buy replacement gear sets? What brand are they?

[Rockpiledriver]

I believe that would be an Integy Servo. Just put one on my rig the other day. It works fine so far and has higher torque and is cheaper than an HS-645. A little on the noisy side.

[DeaDShorT]

Looks like a dead ringer for the TowerPro 945/995...especially with the Futaba horns working on it:|

[run2jeepn]

Looks like a dead ringer for the TowerPro 945/995...especially with the Futaba horns working on it:|


It's not a Tower Pro I can assure you that... I'd guess Integy or Blue-Bird makes them.

[twisted]

have you tried these in a nitro mt ?