It is ALIVE!!!! FINALLY!!! I had the chassis put together back in October, but work had me away from home for a couple of months. Now is up and running. I am going to run it and see what changes I want to make. I do what to change out the green for chrome or gray. Like everyone else, I don't really care for the Betty-body, and if you look closely at this one you'll see what happens when you are in a rush and put on the base coat too thick (after som trimming, this body will likely find itself on my E-Maxx). My Gear: Novak Rooster Crawler ESC Integy 65 Turn Motor Tower Hobbies TS-150 Servos (193oz) 1500mha 2/3 C cell split packs Custom servo/battery trays Traxxas TQ3 TX/RX High-clearance links http://i241.photobucket.com/albums/f...0/DSC02375.jpg http://i241.photobucket.com/albums/f...0/DSC02376.jpg http://i241.photobucket.com/albums/f...0/DSC02382.jpg http://i241.photobucket.com/albums/f...0/DSC02380.jpg |
Nice Scott, took you long enough "thumbsup" Once the weather stops sucking we need to go and try to break some parts together. |
Quote:
Be careful with the easy off, it's hard on the skin and the green coating disolve pretty quickly, like 15-30 secondes... |
Easy Off? No Kidding?!?!? Cool, thanks for the info!!! |
Yeah, Easy Off works great. I've done it on paintball stuff quite a few times, definitely the easiest way to remove annodizing. |
Quote:
|
All times are GMT -6. The time now is 03:25 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com