01-13-2008, 05:32 PM | #1 |
I wanna be Dave Join Date: Jul 2005 Location: North Idaho
Posts: 3,647
| It is ALIVE!!!!
FINALLY!!! I had the chassis put together back in October, but work had me away from home for a couple of months. Now is up and running. I am going to run it and see what changes I want to make. I do what to change out the green for chrome or gray. Like everyone else, I don't really care for the Betty-body, and if you look closely at this one you'll see what happens when you are in a rush and put on the base coat too thick (after som trimming, this body will likely find itself on my E-Maxx). My Gear: Novak Rooster Crawler ESC Integy 65 Turn Motor Tower Hobbies TS-150 Servos (193oz) 1500mha 2/3 C cell split packs Custom servo/battery trays Traxxas TQ3 TX/RX High-clearance links |
Sponsored Links | |
01-13-2008, 05:39 PM | #2 |
Newbie Join Date: Aug 2007 Location: Seattle
Posts: 28
|
Nice Scott, took you long enough Once the weather stops sucking we need to go and try to break some parts together. |
01-13-2008, 06:10 PM | #3 |
Rock Stacker Join Date: Aug 2007 Location: Canada
Posts: 74
| Dip your parts into some easy off oven cleaner (I used the yellow one) to remove the green coating, rinse, and polish back to a shinny finish... Be careful with the easy off, it's hard on the skin and the green coating disolve pretty quickly, like 15-30 secondes... |
01-13-2008, 06:18 PM | #4 |
I wanna be Dave Join Date: Jul 2005 Location: North Idaho
Posts: 3,647
|
Easy Off? No Kidding?!?!? Cool, thanks for the info!!!
|
01-14-2008, 01:36 PM | #5 |
Newbie Join Date: Aug 2007 Location: Seattle
Posts: 28
|
Yeah, Easy Off works great. I've done it on paintball stuff quite a few times, definitely the easiest way to remove annodizing.
|
01-14-2008, 03:58 PM | #6 |
RCC Addict Join Date: Oct 2007 Location: Commerce Twp.
Posts: 1,773
| Works great! I just did some parts last night, chassis plates off my ax-10 came out perfect
|
Thread Tools | |
Display Modes | |
| |