03-11-2008, 08:33 PM | #1 |
Quarry Creeper Join Date: Dec 2006 Location: Corbin KY
Posts: 392
| SW3 Comp Rig
hey guys this is my SW3 comp rig. Im going to the Tri-State Crawlers comp March 29. I am excited to see how it does. Stealth SW3 Novak Goat R2D Spectum DX3.0 Hitec 5645 steering Hitec 645mg dig Delrin Links RCP Straight axles and adapters Traxxas Shocks (getting the new Losi tomorrow) Mayhem Beadlocks Rock Claws Custom Body by ftr (be here thursday or friday) Wheelbase 12.25" Ground clearance 2" Weight 6.5lbs the new body Last edited by juststartin; 03-14-2008 at 09:49 PM. |
Sponsored Links | |
03-11-2008, 08:52 PM | #2 |
Rock Crawler Join Date: Jul 2007 Location: central PA
Posts: 679
|
I'll bet that rig sidehills and does verticals very nicely with 2" under the skid. Very nice SW3 you have there |
03-12-2008, 06:59 PM | #3 |
Quarry Creeper Join Date: Dec 2006 Location: Corbin KY
Posts: 392
|
yes it side hills and climbs better than any rig i have seen. (not trying to sound conceded) i installed the losi shocks today. they are very nice shocks and well worth the money. my body will be here tomorrow so i will post pics then.
|
03-12-2008, 07:33 PM | #4 |
I wanna be Dave Join Date: May 2007 Location: Taylors Falls just hanging with the MNRCRC crew.
Posts: 7,843
|
I've been looking at the DX3 radio but I have heard the Goat and DX3 canhave some problems. Hows yours Goat/DX3 working together?
|
03-12-2008, 07:43 PM | #5 |
Im Brandon Join Date: Feb 2005 Location: Colfax, CA
Posts: 8,156
| |
03-12-2008, 07:57 PM | #6 |
Quarry Creeper Join Date: Dec 2006 Location: Corbin KY
Posts: 392
|
mine hasnt had any problems (knock on wood) so far. i really like the radio becuase of all the adjustments. its a big step up from a TQ3.
|
03-14-2008, 09:40 PM | #7 |
Quarry Creeper Join Date: Dec 2006 Location: Corbin KY
Posts: 392
|
here are some pics with the new body mounted. thanks again ftr I also installed the new losi shocks. they are awesome a very good upgrade. I used to run a R2D. Last week when i was crawling, I got into a bind and broke 2 teeth off of one of the gears. I didnt know it so I kept crawling. I tried to put the tranny in dig, and my whole dig unit fell off of the back of the tranny. I was like wtf. So I take it home and disassemble the truck. Come to find out, the gear had lost its teeth and the screws that hold the dig on, broke off into the back of the tranny. I havent had this tranny for more that 2 months. So now Im going to run my axial tranny with a home made dig until I can get one of the new ones coming out. I never would have thought a Novak Goat had that much power |
03-14-2008, 09:57 PM | #8 |
Rock Crawler Join Date: Nov 2007 Location: Dayton, Ohio
Posts: 506
|
The truck looks good, bit of a belly dragger though lol. I'll be at the Oaks on the 29th with Tri-state too |
03-14-2008, 10:10 PM | #9 |
Quarry Creeper Join Date: Dec 2006 Location: Corbin KY
Posts: 392
|
cool auctually I just changed the belly clearance because of the comp. i was watching some video and it looks like there are alot of loose rock. I am used to slick rock where I dont have to worry about getting hung up. It is right now 3" but I can adjust it down to 2" if needed. Im just not real sure what the rocks are going to be like.
|
03-14-2008, 10:16 PM | #10 |
Rock Crawler Join Date: Nov 2007 Location: Dayton, Ohio
Posts: 506
|
Well if you can get away with 3" of belly clearence and still have a low COG I would set it up that way for the comp. I know there are some pretty steep sidehills were the COG helps a lot and some breakovers where the GC helps a lot sooo. Set it up how you feel comfortable!!! |
03-14-2008, 10:19 PM | #11 |
Quarry Creeper Join Date: Dec 2006 Location: Corbin KY
Posts: 392
|
thanks for the heads up.
Last edited by juststartin; 03-14-2008 at 11:24 PM. |
03-14-2008, 11:31 PM | #12 |
RCC Addict Join Date: Aug 2007 Location: Rohnert Park
Posts: 1,093
|
Nice lookin' rig! I like the paint work too.
|
03-14-2008, 11:36 PM | #13 |
2006 2.2 National Champ Join Date: Dec 2004 Location: Big Bear Lake
Posts: 8,328
|
Nice looking rig, I'm digging the paint job. Let us know how you do at the comp. |
03-14-2008, 11:50 PM | #14 |
Rock Crawler Join Date: Nov 2007 Location: Dayton, Ohio
Posts: 506
|
Lets see some more pics of you set-up with the body off? As soon as I got mine a little more along I will post up a build thread on mine. Well I have one on Tri-state but it's not complete yet. lol
|
03-14-2008, 11:53 PM | #15 |
Quarry Creeper Join Date: Dec 2006 Location: Corbin KY
Posts: 392
|
im waiting on my tranny to come in. should be here tomorrow and im off till tuesday so hopefully everything will be done by then. all i have left is to mount the tranny and set up the dig. i will for sure post pics when i get it done.
|
03-17-2008, 07:33 PM | #16 |
Quarry Creeper Join Date: Dec 2006 Location: Corbin KY
Posts: 392
| |
03-17-2008, 08:21 PM | #17 |
RCC Addict Join Date: Mar 2005 Location: MESA, AZ.
Posts: 1,043
|
Nice Looking Rig. The Goat can tare up a R2 trans without allot effort. What gear are you running on the Goat brushless motor with the R2d ? |
03-17-2008, 08:30 PM | #18 |
Quarry Creeper Join Date: Dec 2006 Location: Corbin KY
Posts: 392
|
I was running the 8t that came with it. I bashed it hard today and the axial held up fine. I also like the smoothness it better than the r2d.
|
03-17-2008, 08:52 PM | #19 |
Newbie Join Date: Jun 2007 Location: Cincinnati
Posts: 7
|
Nice looking rig, wish mine looked that good. I'll try to get my new AX10 out to the tri-state comp on the 29th.
|
03-17-2008, 10:07 PM | #20 | |
Rock Crawler Join Date: Nov 2007 Location: Dayton, Ohio
Posts: 506
| Quote: I hope you dont get your dig before the comp because I dont think I will have mine lol. Truck looks good though. | |
Thread Tools | |
Display Modes | |
| |